Theoretical analysis for photophoresis of a microscale hydrophobic particle in liquids

Manipulating nanoparticles based on a laser photothermal trap

A method of efficient directional optical manipulation of nanoparticles based on a laser photothermal trap is proposed, and the influence mechanism of external conditions on the photothermal trap is clarified. Through optical manipulation experiments and finite-element simulations, it is determined that the main cause of gold nanoparticle directional motion depends on the drag force. The laser power, boundary temperature, and thermal conductivity of the substrate at the bottom of the solution and liquid level essentially affect the intensity of the laser photothermal trap in the solution and then affect the directional movement and deposition speed of gold particles. The result shows the origin of the laser photothermal trap and the three-dimensional spatial velocity distribution of gold particles. It also clarifies the height boundary of photothermal effect onset, which clarifies the boundary between light force and photothermal effect. In addition, nanoplastics are manipulated successfully based on this theoretical study. In this study, the movement law of gold nanoparticles based on the photothermal effect is deeply analyzed through experiments and simulations, which is of significance to the theoretical study of the optical manipulation of nanoparticles using the photothermal effect.

Method of optical manipulation of gold nanoparticles for surface-enhanced Raman scattering in a microcavity

In this study, an optical manipulation and micro-surface-enhanced Raman scattering (microSERS) setup based on a microcavity was developed for efficient capture of gold nanoparticles using the photothermal effect. In addition, optical manipulation of gold nanoparticles and SERS signal detection were performed using only one laser. The results show that the SERS enhancement effect based on the microcavity was more than 20 times that based on a gold colloid solution. The laser power and velocity of nanoparticles exhibited a good linear relationship, and the velocity of nanoparticles decreased with decreasing radius r, which verifies the detriment of the radial thermophoresis in this study. This method can be used to quickly and efficiently drive metal nanoparticles and provides a promising approach for analysis of substances in the fields of chemistry and biology.

Optical Fiber Tweezers: A Versatile Tool for Optical Trapping and Manipulation

Optical trapping is widely used in different areas, ranging from biomedical applications, to physics and material sciences. In recent years, optical fiber tweezers have attracted significant attention in the field of optical trapping due to their flexible manipulation, compact structure, and easy fabrication. As a versatile tool for optical trapping and manipulation, optical fiber tweezers can be used to trap, manipulate, arrange, and assemble tiny objects. Here, we review the optical fiber tweezers-based trapping and manipulation, including dual fiber tweezers for trapping and manipulation, single fiber tweezers for trapping and single cell analysis, optical fiber tweezers for cell assembly, structured optical fiber for enhanced trapping and manipulation, subwavelength optical fiber wire for evanescent fields-based trapping and delivery, and photothermal trapping, assembly, and manipulation.

Fiber Optofluidic Technology Based on Optical Force and Photothermal Effects

Optofluidics is an exciting new area of study resulting from the fusion of microfluidics and photonics. It broadens the application and extends the functionality of microfluidics and has been extensively investigated in biocontrol, molecular diagnosis, material synthesis, and drug delivery. When light interacts with a microfluidic system, optical force and/or photothermal effects may occur due to the strong interaction between light and liquid. Such opto-physical effects can be used for optical manipulation and sensing due to their unique advantages over conventional microfluidics and photonics, including their simple fabrication process, flexible manipulation capability, compact configuration, and low cost. In this review, we summarize the latest progress in fiber optofluidic (FOF) technology based on optical force and photothermal effects in manipulation and sensing applications. Optical force can be used for optofluidic manipulation and sensing in two categories: stable single optical traps and stable combined optical traps. The photothermal effect can be applied to optofluidics based on two major structures: optical microfibers and optical fiber tips. The advantages and disadvantages of each FOF technology are also discussed.

Higher-order micro-fiber modes for Escherichia coli manipulation using a tapered seven-core fiber

Optical manipulation using optical micro- and nano-fibers has shown potential for controlling bacterial activities such as E. coli trapping, propelling, and binding. Most of these manipulations have been performed using the propagation of the fundamental mode through the fiber. However, along the maximum mode-intensity axis, the higher-order modes have longer evanescent field extensions and larger field amplitudes at the fiber waist than the fundamental mode, opening up new possibilities for manipulating E. coli bacteria. In this work, a compact seven-core fiber (SCF)-based micro-fiber/optical tweezers was demonstrated for trapping, propelling, and rotating E. coli bacteria using the excitation of higher-order modes. The diameter of the SCF taper was 4 µm at the taper waist, which was much larger than that of previous nano-fiber tweezers. The laser wavelength was tunable from 1500 nm to 1600 nm, simultaneously causing photophoretic force, gradient force, and scattering force. This work provides a new opportunity for better understanding optical manipulation using higher-order modes at the single-cell level.

On the Motion of Carbon Nanotube Clusters near Optical Fiber Tips: Thermophoresis, Radiative Pressure, and Convection Effects

We analyze the motion of multiwalled carbon nanotubes clusters in water or ethanol upon irradiation with a 975 and 1550 nm laser beam guided by an optical fiber. Upon measuring the velocities of the nanotube clusters in and out of the laser beam cone, we were able to identify thermophoresis, convection and radiation pressure as the main driving forces that determine the equilibrium position of the dispersion at low optical powers: while thermophoresis and convection pull the clusters toward the laser beam axis (negative Soret coefficient), radiation pressure pushes the clusters away from the fiber tip. A theoretical solution for the thermophoretic velocity, which considers interfacial motion and a repulsive potential interaction between the nanotubes and the solvent (hydrophobic interaction), shows that the main mechanism implicated in this type of thermophoresis is the thermal expansion of the fluid, and that the clusters migrate to hotter regions with a characteristic thermal diffusion coefficient D(T) of 9 × 10(-7) cm(2) K(-1) s(-1). We further show that the characteristic length associated with thermophoresis is not that of the nanotube clusters size, O(1) μm, but that corresponding to the microstructure of the clusters, O(1) nm. We finally discuss the role of the formation of gas-liquid interfaces (microbubbles) at high optical powers on the deposition of carbon nanotubes on the optical fiber end faces.

Self-action of continuous laser radiation and Pearcey diffraction in a water suspension with light-absorbing particles

Water suspension of light-absorbing nano-sized particles is an example of a medium in which non-linear effects are present at moderate light intensities favorable for optical treatment of organic and biological objects. We study experimentally the phenomena emerging in a thin layer of such a medium under the action of inhomogeneous light field formed due to the Pearcey diffraction pattern near a microlens focus. In this high-gradient field, the light energy absorbed by the particles induces inhomogeneous distribution of the medium refraction index, which results in observable self-diffraction of the incident light, here being strongly sensitive to the medium position with respect to the focus. This technique, based on the complex spatial structure of both the incident and the diffracted fields, can be employed for the detection and measurement of weak non-linearities.

Self-diffraction of continuous laser radiation in a disperse medium with absorbing particles

We study the self-action of light in a water suspension of absorbing subwavelength particles. Due to efficient accumulation of the light energy, this medium shows distinct non-linear properties even at moderate radiation power. In particular, by means of interference of two obliquely incident beams, it is possible to create controllable phase and amplitude gratings whose contrast, spatial and temporal parameters depend on the beams' coherence and power as well as the interference geometry. The grating characteristics are investigated via the beams' self-diffraction. The main mechanism of the grating formation is shown to be thermal, which leads to the phase grating; a weak amplitude grating also emerges due to the particles' displacements caused by the light-induced gradient and photophoretic forces. These forces, together with the Brownian motion of the particles, are responsible for the grating dynamics and degradation. The results and approaches can be used for investigation of the thermal relaxation and kinetic processes in liquid suspensions.

Continuous separation principles using external microaction forces

During the past decade, methods for the continuous separation of microparticles with microaction forces have rapidly advanced. Various action forces have been used in designs of both microchannel and capillary continuous separation systems, which depend on properties such as conductivity, permittivity, absorptivity, refractive index, magnetic susceptibility, and compressibility. Particle migration velocity has been used to characterize the particles. Biological cells have been the most interesting targets of these continuous separation methods.

Microbe removal using a micrometre-sized optical fiber

The growing global shortage of fresh water has lead to the need for technological innovations for water purification and reuse. The removal of pathogenic microbes from urban, laboratory or industrial wastewater is one of the most challenging and critical issues due to the potential risk of microbe outbreaks. In addition, microbe removal in human blood or tissues has also inspired novel techniques for extracting and collecting different cells in fluidic channels or vessels. Recently, efficient removal of microbes from flowing water running under gravity feed has been achieved using filters in nanotubes or nanofibers. Here we report a highly efficient removal of microbes from flowing water in a fluidic channel using a reusable micrometre-sized optical fiber. Our technique is based on photophoresis of the microbes induced by the radiation of 1.55 μm wavelength injected into the fiber. Yeast cell suspensions, as a sample of microbe-contaminated water, are flown through a fluidic channel and the suspended cells are collected by the photophoretic forces, leading to a consistent accumulation of the yeast cells. The experiments indicate that a removal efficiency of 99.9% can be obtained when the flow velocity of the suspensions is less than the peak photophoretic velocity of the yeast cells.

Particle separation in fluidic flow by optical fiber

We report a separation of two different size particles in fluidic flow by an optical fiber. With a light of 1.55 μm launched into the fiber, particles in stationary water were massively trapped and assembled around the fiber by a negative photophoretic force. By introducing a fluidic flow, the assembled particles were separated into two different downstream positions according to their sizes by the negative photophoretic force and the dragging force acted on the particles. The intensity distribution of light leaked from the fiber and the asymmetry factor of energy distribution have been analysed as crucial factors in this separation. Poly(methyl methacrylate) particles (5-/10-μm diameter), SiO(2) particles (2.08-/5.65-μm diameter), and SiO(2) particles (2.08-μm diameter) mixed with yeast cells were used to demonstrate the effectiveness of the separation. The separation mechanism has also been numerical simulated and theoretical interpreted.

Robust trapping and manipulation of airborne particles with a bottle beam

We demonstrate that micron-sized light-absorbing particles can be trapped and transported photophoretically in air using an optical bottle formed inside the focal volume of a lens with a controlled amount of spherical aberration. This optical fiber-based single beam trap can be used in numerous applications where true 3D manipulation and delivery of airborne micro-objects is required.

Massive photothermal trapping and migration of particles by a tapered optical fiber

A simple but highly efficient method for particles or bacteria trapping and removal from water is of great importance for local water purification, particularly, for sanitation. Here, we report a massive photothermal trapping and migration of dielectric particles (SiO2, 2.08-µm diameter) in water by using a tapered optical fiber (3.1-µm diameter for taper). With a laser beam of 1.55 µm (170 mW) injected into the fiber, particles moved towards the position, which is about 380 µm away from the tip of the fiber, and assembled at a 290 µm × 100 µm spindle-shaped region. The highest assembly speed of particles is 22.1 ind./s and the highest moving velocity is 20.5 µm/s, which were induced by both negative photophoresis and temperature gradient. The number of assembled particles can reach 10,150 in 15 minutes. With a move of the fiber, the assembled particles will also migrate. We found that, when the fiber was moved 172 µm away from its original location, almost all of the assembled 10,150 particles were migrated to a new location in 140 s with a distance of 172 µm from their original location.

Photophoretic assembly and migration of dielectric particles and Escherichia coli in liquids using a subwavelength diameter optical fiber

We demonstrate a photophoretic assembly and migration of dielectric (SiO(2) and TiO(2)) particles and bacteria (Escherichia coli) in liquids by using a subwavelength diameter fiber. With a lightwave at 1.55 μm launched into the fiber, the objects are radiated by the leaking light of the fiber to yield negative photophoretic forces which drive the objects to move toward the fiber, with an average assembling/migrating speed of 5-15 individuals per second (ind/s). The influences of laser-on duration, optical power, and size of particles on the photophoretic velocities are also investigated.

Photothermal trapping of dielectric particles by optical fiber-ring

The removal of dielectric particles and bacteria from water is an extremely important global issue, particularly, for drinking and sanitation. This work provides a demonstration of optical purification of water using an optical fiber-ring. The size of particles suspended in water for trapping is 2.08 μm in diameter and the wavelength of light used for inducing photothermal effect is 1.55 μm with a power of 97 mW. The fiber, 6 μm in diameter, was formed to a racket-shaped ring with a minimum diameter of 167 μm and a maximum one of 350 μm. Experiment indicates that the particles moved toward the ring with the highest velocity of 4.2 μm/s and are trapped/assembled in the center of the ring once the laser beam of 1.55-μm wavelength was launched into the fiber. With a moving of the fiber-ring, the trapped/assembled particles were moved and the water can be purified by removal of the particles.