Measurement of viscosity of lyotropic liquid crystals by means of rotating laser-trapped microparticles

Bio-compatible miniature viscosity sensor based on optical tweezers

Viscosity is a fundamental biomechanical parameter related to the function and pathological status of cells and tissues. Viscosity sensing is of vital importance in early biomedical diagnosis and health monitoring. To date, there have been few methods of miniature viscosity sensing with high safety, flexible controllability, and excellent biocompatibility. Here, an indirect optical method combining the significant advantages of both optical tweezers and microflows has been presented in this paper to construct a cellular micromotor-based viscosity sensor. Optical tweezers are used to drive a yeast cell or biocompatible SiO₂ particle to rotate along a circular orbit and thus generate a microvortex. Another target yeast cell in the vortex center can be controllably rotated under the action of viscous stress to form a cellular micromotor. As the ambient viscosity increases, the rotation rate of the micromotor is reduced, and thus viscosity sensing is realized by measuring the relationship between the two parameters. The proposed synthetic material-free and fuel-free method is safer, more flexible, and biocompatible, which makes the cellular micromotor-based viscosity sensor a potential detector of the function and pathological status of cells and tissues in vivo without introducing any exogenous cells.

Shear-induced polydomain structures of nematic lyotropic chromonic liquid crystal disodium cromoglycate

Lyotropic chromonic liquid crystals (LCLCs) represent aqueous dispersions of organic disk-like molecules that form cylindrical aggregates. Despite the growing interest in these materials, their flow behavior is poorly understood. Here, we explore the effect of shear on dynamic structures of the nematic LCLC, formed by 14 wt% water dispersion of disodium cromoglycate (DSCG). We employ in situ polarizing optical microscopy (POM) and small-angle and wide-angle X-ray scattering (SAXS/WAXS) to obtain independent and complementary information on the director structures over a wide range of shear rates. The DSCG nematic shows a shear-thinning behavior with two shear-thinning regions (Region I at [small gamma, Greek, dot above] < 1 s-1 and Region III at [small gamma, Greek, dot above] > 10 s-1) separated by a pseudo-Newtonian Region II (1 s-1 < [small gamma, Greek, dot above] < 10 s-1). The material is of a tumbling type. In Region I, [small gamma, Greek, dot above] < 1 s-1, the director realigns along the vorticity axis. An increase of [small gamma, Greek, dot above] above 1 s-1 triggers nucleation of disclination loops. The disclinations introduce patches of the director that deviates from the vorticity direction and form a polydomain texture. Extension of the domains along the flow and along the vorticity direction decreases with the increase of the shear rate to 10 s-1. Above 10 s-1, the domains begin to elongate along the flow. At [small gamma, Greek, dot above] > 100 s-1, the texture evolves into periodic stripes in which the director is predominantly along the flow with left and right tilts. The period of stripes decreases with an increase of [small gamma, Greek, dot above]. The shear-induced transformations are explained by the balance of the elastic and viscous energies. In particular, nucleation of disclinations is associated with an increase of the elastic energy at the walls separating nonsingular domains with different director tilts. The uncovered shear-induced structural effects would be of importance in the further development of LCLC applications.

Holographic tracking and sizing of optically trapped microprobes in diamond anvil cells

We demonstrate that Digital Holographic Microscopy can be used for accurate 3D tracking and sizing of a colloidal probe trapped in a diamond anvil cell (DAC). Polystyrene beads were optically trapped in water up to Gigapascal pressures while simultaneously recording in-line holograms at 1 KHz frame rate. Using Lorenz-Mie scattering theory to fit interference patterns, we detected a 10% shrinking in the bead's radius due to the high applied pressure. Accurate bead sizing is crucial for obtaining reliable viscosity measurements and provides a convenient optical tool for the determination of the bulk modulus of probe material. Our technique may provide a new method for pressure measurements inside a DAC.

Laser trapping of colloidal metal nanoparticles

Optical trapping using focused laser beams (laser tweezers) has been proven to be extremely useful for contactless manipulation of a variety of small objects, including biological cells, organelles within cells, and a wide range of other dielectric micro- and nano-objects. Colloidal metal nanoparticles have drawn increasing attention in the field of optical trapping because of their unique interactions with electromagnetic radiation, caused by surface plasmon resonance effects, enabling a large number of nano-optical applications of high current interest. Here we try to give a comprehensive overview of the field of laser trapping and manipulation of metal nanoparticles based on results reported in the recent literature. We also discuss and describe the fundamentals of optical forces in the context of plasmonic nanoparticles, including effects of polarization, optical angular momentum, and laser heating effects, as well as the various techniques that have been used to trap and manipulate metal nanoparticles. We conclude by suggesting possible directions for future research.

Periodic dynamics, localization metastability, and elastic interaction of colloidal particles with confining surfaces and helicoidal structure of cholesteric liquid crystals

Nematic and cholesteric liquid crystals are three-dimensional fluids that possess long-range orientational ordering and can support both topological defects and chiral superstructures. Implications of this ordering remain unexplored even for simple dynamic processes such as the ones found in so-called "fall experiments," or motion of a spherical inclusion under the effects of gravity. Here we show that elastic and surface anchoring interactions prompt periodic dynamics of colloidal microparticles in confined cholesterics when gravity acts along the helical axis. We explore elastic interactions between colloidal microparticles and confining surfaces as well as with an aligned ground-state helical structure of cholesterics for different sizes of spheres relative to the cholesteric pitch, demonstrating unexpected departures from Stokes-like behavior at very low Reynolds numbers. We characterize metastable localization of microspheres under the effects of elastic and surface anchoring periodic potential landscapes seen by moving spheres, demonstrating the important roles played by anchoring memory, confinement, and topological defect transformation. These experimental findings are consistent with the results of numerical modeling performed through minimizing the total free energy due to colloidal inclusions at different locations along the helical axis and with respect to the confining substrates. A potential application emerging from this work is colloidal sorting based on particle shapes and sizes.

Geometrically unrestricted, topologically constrained control of liquid crystal defects using simultaneous holonomic magnetic and holographic optical manipulation

Despite the recent progress in physical control and manipulation of various condensed matter, atomic, and particle systems, including individual atoms and photons, our ability to control topological defects remains limited. Recently, controlled generation, spatial translation, and stretching of topological point and line defects have been achieved using laser tweezers and liquid crystals as model defect-hosting systems. However, many modes of manipulation remain hindered by limitations inherent to optical trapping. To overcome some of these limitations, we integrate holographic optical tweezers with a magnetic manipulation system, which enables fully holonomic manipulation of defects by means of optically and magnetically controllable colloids used as "handles" to transfer forces and torques to various liquid crystal defects. These colloidal handles are magnetically rotated around determined axes and are optically translated along three-dimensional pathways while mechanically attached to defects, which, combined with inducing spatially localized nematic-isotropic phase transitions, allow for geometrically unrestricted control of defects, including previously unrealized modes of noncontact manipulation, such as the twisting of disclination clusters. These manipulation capabilities may allow for probing topological constraints and the nature of defects in unprecedented ways, providing the foundation for a tabletop laboratory to expand our understanding of the role defects play in fields ranging from subatomic particle physics to early-universe cosmology.

Dynamic electro-optic response of graphene/graphitic flakes in nematic liquid crystals

Electric field induced dynamic reorientation phenomenon of graphene/graphitic flakes in homogeneously aligned nematic liquid crystal (NLC) medium has been demonstrated by optical microscopy. The flakes reorient from parallel to perpendicular configuration with respect to boundary plates of confining cells for an applied field strength of as low as tens of millivolt per micrometer. After field removal the reoriented flakes recover to their initial state with the help of relaxation of NLC. Considering flake reorientation phenomenon both in positive and negative dielectric anisotropy NLCs, the reorientation process depends on interfacial Maxwell-Wagner polarization and NLC director reorientation. We propose a phenomenological model based on electric field induced potential energy of graphitic flakes and coupling contribution of positive NLC to generate the rotational kinetic energy for flake reorientation. The model successfully explains the dependence of flake reorientation time over flake shape anisotropy, electric-field strength, and flake area. Using present operating scheme it is possible to generate dark field-off state and bright field-on state, having application potential for electro-optic light modulation devices.

Optical manipulation of self-aligned graphene flakes in liquid crystals

Graphene recently emerged as a new two-dimensional material platform with unique optical, thermal and electronic properties. Single- or few-atom-thick graphene flakes can potentially be utilized to form structured bulk composites that further enrich these properties and enable a broad range of new applications. Here we describe optical manipulation of self-aligned colloidal graphene flakes in thermotropic liquid crystals of nematic and cholesteric types. Three-dimensional rotational and translational manipulation of graphene flakes by means of holographic optical tweezers allows for non-contact spatial patterning of graphene, control of liquid crystal defects, and low-power optical realignment of the liquid crystal director using these flakes. Potential applications include optically- and electrically-controlled reconfigurable liquid crystalline dispersions of spontaneously aligning colloidal graphene flakes and new electro-optic devices with graphene-based interconnected transparent electrodes at surfaces and in the bulk of liquid crystals.

Optically-actuated translational and rotational motion at the microscale for microfluidic manipulation and characterization

The single beam optical trap (optical tweezers), a highly focused beam, is on its way to revolutionizing not only the fields of colloidal physics and biology, but also materials science and engineering. Recently, spatially-extended three-dimensional light patterns have gained considerable usage for exerting force to alter, manipulate, organize and characterize materials. To advance the degree of manipulation, such as rotation of materials in microfluidic environments along with spatial structuring, other beam parameters such as phase and polarization have to be configured. These advances in optical tweezers' technology have enabled complex microfluidic actuation and sorting. In addition to remotely (in a non-contact way) applying force and torques in three-dimensions, which can be continuously varied unlike mechanical manipulators, optical tweezers-based methods can be used for sensing the force of interaction between microscopic objects in a microfluidic environment and for the characterization of micro-rheological properties. In this review, we place emphasis on applications of optical actuation based on novel beams in performing special functions such as rotation, transportation, sorting and characterization of the microscopic objects. Further, we have an extended discussion on optical actuation (transport and rotation) with fiber optic microbeams and spectroscopic characterization in the microfluidic environment. All these advancements in optical manipulation would further facilitate the growing use of optical tools for complex microfluidic manipulations.

Electromagnetic torque tweezers: a versatile approach for measurement of single-molecule twist and torque

The well-established single-molecule force-spectroscopy techniques have recently been complemented by methods that can measure torque and twist directly, notably magnetic torque tweezers and the optical torque wrench. A limitation of the current torque measurement schemes is the intrinsic coupling between the force and torque degrees of freedom. Here we present electromagnetic torque tweezers (eMTT) that combine permanent and electromagnets to enable independent control of the force and torsional trap stiffness for sensitive measurements of single molecule torque and twist. Using the eMTT, we demonstrate sensitive torque measurements on tethered DNA molecules from simple tracking of the beads' (x,y)-position, obviating the need for any angular tracking algorithms or markers. Employing the eMTT for high-resolution torque measurements, we experimentally confirm the theoretically predicted torque overshoot at the DNA buckling transition in high salt conditions. We envision that the flexibility and control afforded by the eMTT will enable a range of new torque and twist measurement schemes from single-molecules to living cells.

Unconventional structure-assisted optical manipulation of high-index nanowires in liquid crystals

Stable optical trapping and manipulation of high-index particles in low-index host media is often impossible due to the dominance of scattering forces over gradient forces. Here we explore optical manipulation in liquid crystalline structured hosts and show that robust optical manipulation of high-index particles, such as GaN nanowires, is enabled by laser-induced distortions in long-range molecular alignment, via coupling of translational and rotational motions due to helicoidal molecular arrangement, or due to elastic repulsive interactions with confining substrates. Anisotropy of the viscoelastic liquid crystal medium and particle shape give rise to a number of robust unconventional trapping capabilities, which we use to characterize defect structures and study rheological properties of various thermotropic liquid crystals.