Supercontinuum generation for coherent anti-Stokes Raman scattering microscopy with photonic crystal fibers

Flexible dual-soliton manipulation for coherent anti-Stokes Raman scattering spectroscopy

Though dual soliton is used as the Stokes source in coherent anti-Stokes Raman scattering (CARS) experiments, the mechanism behind it is still not fully investigated. In this paper, dual-soliton pulses generation with a highly birefringent photonic crystal fiber (PCF) is numerically explored and experimentally verified. The simulated pulse exhibits various characteristics in the temporal and spectral domains with respect to the input linear polarization angle, and can be classified into four regions based on distances in the temporal and spectral domain of the soliton pair. By tuning input power and polarization angle, a soliton pair with desirable spectral coverage and temporal delay for CARS applications can be flexibly generated before the two solitons overlap in time domain. The simulated results are then experimentally validated by comparing their temporal and spectral characteristics. In addition, the benefit of using dual-soliton sources, such as Stokes beam, in CARS experiments is also demonstrated. The results and methods presented in this work can improve CARS spectroscopy and microscopy techniques, and may also be beneficial to other dual-wavelength source applications.

Stimulated Raman scattering in AsSe2-As2S5 chalcogenide microstructured optical fiber with all-solid core

The effects of stimulated Raman scattering (SRS) is demonstrated in chalcogenide microstructured optical fiber (MOF) with all-solid AsSe2 core and As2S5 cladding. The first-order Raman Stokes wave is investigated in the MOFs with different core diameters pumped by the picosecond pulses at 1958 nm. The maximum conversion efficiency of -15.0 dB from the pump to first-order Raman Stokes wave is obtained in the MOF with the core diameter of 2.6 μm. The conversion efficiency decreases when the core diameter deviates from 2.6 μm. When the fiber core is larger, the effective nonlinearity is decreased. When the fiber core is smaller, the mode field is difficult to be confined in the core. The walk-off length between the pump and Stokes wave is crucial to the process of SRS according to the analysis of the experimental data. The Raman effects are simulated numerically. The simulated results can agree well with the experiments. It is the first time to demonstrate the Raman effect in AsSe2-As2S5 MOF, to the best of our knowledge.

Speckle-free femtosecond red-green-blue (RGB) source from a fiber laser driven spectrally efficient two zero dispersion wavelength fiber source

We report a novel ultrafast red-green-blue (RGB) laser source based on second harmonic generation from a two zero dispersion wavelength (TZDW) fiber continuum source. The TZDW fiber source consists of a custom-built Yb:fiber amplifier and a commercially available TZDW photonic crystal fiber (PCF) which enables low noise and efficient frequency conversion from the 1035 nm pump source to two spectrally localized pulses centered at 850 nm and 1260 nm with 39.6% and 33.7% power efficiencies. With angularly multiplexed simultaneous phase matching, we achieve mW average power of red, green and blue pulses at 630 nm, 517 nm and 426 nm from single pass second harmonic generation. With broad RGB bandwidths of 7.4 nm, 3.2 nm and 5.2 nm, the source is inherently speckle-free while maintaining an excellent color rendering capability with higher than 99.7% excitation purity of the RGB color primaries, leading to the coverage of 192% NTSC color gamut (CIE 1976). The reported source features a simple system geometry; its potential in power scaling is discussed with currently available technologies.

Determining optimum operating conditions of the polarization-maintaining fiber with two far-lying zero dispersion wavelengths for CARS microscopy

Single femtosecond laser-based coherent anti-Stokes Raman scattering (CARS) microscopy, using a photonic crystal fiber (PCF) pumped in the near-IR to generate a supercontinuum for the Stokes source, is rapidly being adopted as a cost-effective approach. A PCF with two closely-lying zero dispersion wavelengths is a popular choice for the Stokes source, but it is often limited to imaging lipids. A polarization-maintaining PCF with two far-lying zero dispersion wavelengths offers important advantages for polarization CARS microscopy, and for CARS imaging in the fingerprint region. This PCF fiber, though commercially available, has limited use for CARS microscopy in the C-H bond region. The main problem is that the supercontinuum from this fiber is typically noisier than that from a standard PCF with two closely-lying zero dispersion wavelengths. To overcome this, we determined the optimum operating conditions for generating a low-noise supercontinuum out of a PCF with two far-lying zero dispersion wavelengths, in terms of the input parameters of the excitation pulse. We measured the relative intensity noise (RIN) of the Stokes and the corresponding CARS signal as a function of the input laser parameters in this fiber. We showed that the results of CARS imaging using this alternate fiber are comparable to those achieved using the standard fiber, for input laser pulse conditions of low average power, narrow pulse width with slightly positive chirp, and polarization direction parallel to the slow axis of the selected fiber.

Hyperspectral multimodal CARS microscopy in the fingerprint region

A simple scheme for multimodal coherent anti-Stokes Raman scattering (CARS) microscopy is based on the spectral focusing of ultrafast-oscillator-derived pump/probe light and synchronous photonic crystal fiber (PCF) fiber-generated broadband Stokes light. To date, such schemes allowed rapid hyperspectral imaging throughout the CH/OH high frequency region (2700-4000 cm(-1) ). Here we extend this approach to the middle (1640-3300 cm(-1) ) and fingerprint regions (850-1800 cm(-1) ) of the Raman spectrum. Our simple integrated approach to rapid hyperspectral CARS microscopy in the fingerprint region is demonstrated by applications to label-free multimodal imaging of cellulose and bulk bone, including use of the phosphate resonance at 960 cm(-1) .

Broadly tunable femtosecond mid-infrared source based on dual photonic crystal fibers

We report a novel scheme of generating broadly tunable femtosecond mid-IR pulses based on difference frequency mixing the outputs from dual photonic crystal fibers (PCF). With a 1.3 W, 1035 nm, 300 fs and 40 MHz Yb fiber chirped pulse amplifier as the laser source, a PCF with single zero dispersion wavelength (ZDW) at the laser wavelength is employed to spectrally broaden a portion of the laser pulses. Facilitated by self-phase modulation, its output spectrum possesses two dominant outermost peaks that can be extended to 970 nm and 1092 nm. A different PCF with two closely spaced ZDWs around the laser wavelength is used to generate the intense Stokes pulses between 1240 - 1260 nm. Frequency mixing the dual PCFs outputs in an AgGaS(2) crystal results in mid-IR pulses broadly tunable from 4.2 μm to 9 μm with a maximum average power of 640 µW at 4.5 μm, corresponding to 16 pJ of pulse energy.