A plasmon ruler based on nanoscale photothermal effect

Finite element modeling of plasmonic resonances in photothermal gold nanoparticles embedded in cells

The use of plasmonic nanoparticles in performing photothermal treatments in cancer cells requires a full knowledge about their optical properties. The surface plasmon resonance is easily foreseen and measurable in colloidal suspensions, however it can be strongly modified when located inside cells. Assessing the optical behavior of plasmonic nanoparticles in cells is essential for an efficient and controlled treatment. This requires the combination of experimental data and computational models to understand the mechanisms that cause the change in their optical response. In this work, we investigate the plasmonic response of Au nanospheres (AuNSs) internalized into cancer cells (MCF-7). Experimental data are compared to the simulations provided by a 3D model based on a finite element method. We demonstrate the impact of physical parameters such as the type of NS assembly, the surrounding medium and the interparticle gap, in the photothermal efficiency of AuNSs. Results open the avenue to predict, by numerical calculations, the optical properties of plasmonic nanoparticles inside cells to minimize treatment costs and times in photothermal therapies.

Generalization of Self-Assembly Toward Differently Shaped Colloidal Nanoparticles for Plasmonic Superlattices

Periodic superlattices of noble metal nanoparticles  have demonstrated superior plasmonic properties compared to randomly distributed plasmonic arrangements due to near-field coupling and constructive far-field interference. Here, a chemically driven, templated self-assembly process of colloidal gold nanoparticles is investigated and optimized, and the technology is extended toward a generalized assembly process for variously shaped particles, such as spheres, rods, and triangles. The process yields periodic superlattices of homogenous  nanoparticle clusters on a centimeter scale. Electromagnetically simulated absorption spectra and corresponding experimental extinction measurements demonstrate excellent agreement in the far-field for all particle types and different lattice periods. The electromagnetic simulations reveal the specific nano-cluster near-field behavior, predicting the experimental findings provided by surface-enhanced Raman scattering measurements. It turns out that periodic arrays of spherical nanoparticles produce higher surface-enhanced Raman scattering enhancement factors than particles with less symmetry as a result of very well-defined strong hotspots.

Rapid controllable synthesis of branched Au superparticles: formation mechanism of toggling the growth mode and their applications in optical broadband absorption

We develop a tunable, ultrafast (5 seconds), and mass-producible seed-mediated synthesis method to prepare branched Au superparticles consisting of multiple small Au island-like nanoparticles by a wet chemical route. We reveal and confirm the toggling formation mechanism of Au superparticles between the Frank-van der Merwe (FM) growth mode and the Volmer-Weber (VW) growth mode. The key factor of this special structure is the frequent toggling between the FM (layer by layer) growth mode and the VW (island) growth mode induced by 3-aminophenol, which is continuously absorbed on the surface of newborn Au nanoparticles, leading to a relatively high surface energy during the overall synthesis process, thus achieving an island on island growth. Such Au superparticles demonstrate broadband absorption from visible to near-infrared regions due to their multiple plasmonic coupling and hence they have important applications in sensors, photothermal conversion and therapy, etc. We also exhibit the excellent properties of Au superparticles with different morphologies, such as NIR-II photothermal conversion and therapy and SERS detection. The photothermal conversion efficiency under 1064 nm laser irradiation was calculated to be as high as 62.6% and they exhibit robust photothermal therapy efficiency. This work provides insight into the growth mechanism of plasmonic superparticles and develops a broadband absorption material for highly efficient optical applications.

Quantitative Insights into a Plasmonic Ruler Equation from the Perspective of Enhanced Near Field

The plasmonic shift of resonance wavelength induced by near-field coupling enables one to measure nanoscale distances optically. Empirically, the well-known ruler equation correlating plasmon shift with interparticle spacing was proposed. Though it has been widely used in analyzing simulation and experimental outcomes, little is known about the underlying physical mechanism of the characteristic exponential form of the plasmon ruler equation and the universal decay constant therein. In this work, we attempt to decrypt these from the perspective of plasmon near-field enhancement. Based on an analytical quasi-normal mode formula for plasmon shifts, we proved that the exponential decaying electric field is the critical reason that results in the exponential form of the plasmon ruler equation and quantitatively, we found that the universal decay constant in the plasmon ruler equation actually reflects the range of the enhanced near field. This work hopefully helps to deepen the understanding of the mechanism of light-matter interaction in corresponding plasmonic processes.

Plasmonic Gold Trimers and Dimers with Air-Filled Nanogaps

The subwavelength confinement of light energy in the nanogaps formed between adjacent plasmonic nanostructures provides the foundational basis for nanophotonic applications. Within this realm, air-filled nanogaps are of central importance because they present a cavity where application-specific nanoscale objects can reside. When forming such configurations on substrate surfaces, there is an inherent difficulty in that the most technologically relevant nanogap widths require closely spaced nanostructures separated by distances that are inaccessible through standard electron-beam lithography techniques. Herein, we demonstrate an assembly route for the fabrication of aligned plasmonic gold trimers with air-filled vertical nanogaps having widths that are defined with spatial controls that exceed those of lithographic processes. The devised procedure uses a sacrificial oxide layer to define the nanogap, a glancing angle deposition to impose a directionality on trimer formation, and a sacrificial antimony layer whose sublimation regulates the gold assembly process. By further implementing a benchtop nanoimprint lithography process and a glancing angle ion milling procedure as additional controls over the assembly, it is possible to deterministically position trimers in periodic arrays and extend the assembly process to dimer formation. The optical response of the structures, which is characterized using polarization-dependent spectroscopy, surface-enhanced Raman scattering, and refractive index sensitivity measurements, shows properties that are consistent with simulation. This work, hence, forwards the wafer-based processing techniques needed to form air-filled nanogaps and place plasmonic energy at site-specific locations.

Plasmonic enhancement of photocurrent generation in two-dimensional heterostructure of WSe2/MoS2

Enhancing the photoresponse of single-layered semiconductor materials is a challenge for high-performance photodetectors due to atomically thickness and limited quantum efficiency of these devices. Band engineering in heterostructure of transition metal chalcogenides (TMDs) can sort out part of this challenge. Here, we address this issue by utilizing the plasmonics phenomenon to enrich the optoelectronics property of the WSe₂/MoS₂heterojunction and further enhancement of photoresponse. The introduced approach presents a contamination-free, tunable and efficient way to improve light interactions with heterojunction devices. The results showed a 3600-fold enhancement in photoresponsivity and a 46-fold increase in external quantum efficiency (549%) along with a fast photoresponse time (~2μs) and light polarization dependence. This improvement may assign to multiple light scatterings by the Au nanoarrays and creation of strong local electrical fields (hot spots) at the interfaces of the gold nanoarrays and the TMDs heterostructure. The high-energy electrons (hot electrons) originating from hot spots surmount easily to conduction bands of heterojunction which is leading to a remarkable enhancement of photocurrent. The plasmons assisted photoresponse strategy can be easily matched with the semiconductor industry to boost the performance of optoelectronics devices for practical applications.

Plasmonic Photocatalytic Enhancement of L-Cysteine Self-Assembled Gold Nanoparticle Clusters for Fenton Reaction Catalysis

Plasmon-enhanced photocatalysis has the potential to reduce activation energies and decrease temperature requirements, which increases catalyst stability and lowers process operating costs. The near-field enhancement that occurs at junctions between plasmonic nanoparticle clusters (i.e., hot spots) has been well-studied for sensing applications (e.g., Raman scattering). However, experimental insight into the effect of nanoparticle cluster hot spots on plasmon-enhanced photocatalysis is lacking. We demonstrate that catalytic activity is increased when clusters of gold nanoparticles (AuNPs) are formed relative to isolated particles using the same catalyst loading. Through experimental controls, we conclude that this catalytic enhancement is most likely due to the formation of plasmonic hot spots. Clusters of AuNPs were formed by adding L-cysteine to an AuNP dispersion, and a 20 ± 12% enhancement in the photocatalytic dye degradation rate was observed using a Fenton process. While this report may be a modest enhancement relative to the spectacular near-field electromagnetic field enhancements predicted by simulation at the nanoparticle junction, this finding supports the recent work of Srimanta et al. that plasmonic hot spots contribute to catalytic rate enchantments. It is anticipated that further self-assembly strategies to optimize interparticle orientations and cluster size distributions will improve the enhancement due to the formation of hot spots, and careful control will be required. For example, excess L-cysteine addition revealed extensive aggregation and subsequent rate reductions.

Ultra-broadband solar absorbers for high-efficiency thermophotovoltaics

Metamaterial absorbers have attracted great attention over the past few years and exhibited a promising prospect in solar energy harvesting and solar thermophotovoltaics (STPVs). In this work, we introduce a solar absorber scheme, which enables efficient solar irradiance harvesting, superb thermal robustness and high solar thermal energy conversion for STPV systems. The optimum structure demonstrates an average absorbance of 97.85% at the spectral region from 200 nm to 2980 nm, indicating the near-unity absorption in the main energy range of the solar radiance. The solar-thermal conversion efficiencies surpassing 90% are achieved over an ultra-wide temperature range (100-800 °C). Meanwhile, the analysis indicates that this metamaterial has strong tolerance for fabrication errors. By utilizing the simple two-dimensional (2D) titanium (Ti) gratings, this design is able to get beyond the limit of costly and sophisticated nanomanufacturing techniques. These impressive features can hold the system with wide applications in metamaterial and other optoelectronic devices.

Visual discrimination of aromatic acid substitution patterns by supramolecular nanocooperativity

Physicochemical and, in particular, visual recognition of positional isomers, due to their similar appearance and properties, is an extremely challenging task. Here we present an easy-to-prepare assay for the naked-eye differentiation of all possible isomers of phthalic acids. The desired optical response is attained through specific non-covalent interactions between the acids and a cationic macrocyclic host. These interactions are then translated to and amplified by gold nanoparticles which subsequently aggregate to various extents producing a color palette.

Femtosecond Plasmonic Laser Nanosurgery (fs-PLN) mediated by molecularly targeted gold nanospheres at ultra-low pulse fluences

Plasmonic Laser Nanosurgery (PLN) is a novel photomodification technique that exploits the near-field enhancement of femtosecond (fs) laser pulses in the vicinity of gold nanoparticles. While prior studies have shown the advantages of fs-PLN to modify cells, further reduction in the pulse fluence needed to initiate photomodification is crucial to facilitate deep–tissue treatments. This work presents an in-depth study of fs-PLN at ultra-low pulse fluences using 47 nm gold nanoparticles, conjugated to antibodies that target the epithelial growth factor receptor and excited off-resonance using 760 nm, 270 fs laser pulses at 80 MHz repetition rate. We find that fs-PLN can optoporate cellular membranes with pulse fluences as low as 1.3 mJ/cm², up to two orders of magnitude lower than those used at lower repetition rates. Our results, corroborated by simulations of free-electron generation by particle photoemission and photoionization of the surrounding water, shed light on the off-resonance fs-PLN mechanism. We suggest that photo-chemical pathways likely drive cellular optoporation and cell damage at these off-resonance, low fluence, and high repetition rate fs-laser pulses, with clusters acting as local concentrators of ROS generation. We believe that the low fluence and highly localized ROS-mediated fs-PLN approach will enable targeted therapeutics and cancer treatment.

Reusable TiN Substrate for Surface Plasmon Resonance Heterodyne Phase Interrogation Sensor

A TiN-based substrate with high reusability presented high-sensitivity refractive index measurements in a home-built surface plasmon resonance (SPR) heterodyne phase interrogation system. TiN layers with and without additional inclined-deposited TiN (i-TiN) layers on glass substrates reached high bulk charge carrier densities of 1.28 × 10²² and 1.91 × 10²² cm⁻³, respectively. The additional 1.4 nm i-TiN layer of the nanorod array presented a detection limit of 6.1 × 10⁻⁷ RIU and was higher than that of the 46 nm TiN layer at 1.2 × 10⁻⁶ RIU when measuring the refractive index of a glucose solution. Furthermore, the long-term durability of the TiN-based substrate demonstrated by multiple processing experiments presented a high potential for various practical sensing applications.

Review of Experimental Setups for Plasmonic Photocatalytic Reactions

Plasmonic photocatalytic reactions have been substantially developed. However, the mechanism underlying the enhancement of such reactions is confusing in relevant studies. The plasmonic enhancements of photocatalytic reactions are hard to identify by processing chemically or physically. This review discusses the noteworthy experimental setups or designs for reactors that process various energy transformation paths for enhancing plasmonic photocatalytic reactions. Specially designed experimental setups can help characterize near-field optical responses in inducing plasmons and transformation of light energy. Electrochemical measurements, dark-field imaging, spectral measurements, and matched coupling of wavevectors lead to further understanding of the mechanism underlying plasmonic enhancement. The discussions herein can provide valuable ideas for advanced future studies.

New coupling mechanism of titanium nitride nanosphere dimers at short separation distances

The coupled localized plasmon modes generated by a metal plasmonic nanoparticle (NP) dimer induces a stronger plasmon enhanced electromagnetic field as well as a stronger optical response compared to that of a single NP. Owing to the small Drude damping factor, however, the absorption bandwidth of noble metallic NPs is insufficiently broad. Herein, the near-field wide band coupling absorption for 25 nm diameter TiN nanospheres is investigated in a homo-dimer arrangement for various separation distances using the finite element method. An enhancement of the wide band coupling absorption and a red-shift is found, which can be explained by an uncomplicated dipole-dipole coupling model at interparticle distances greater than 5 nm. At short separation distances, the coupling absorption of the TiN dimer exhibits a tremendous change, which is diametrically opposite the results found for a Au dimer. This unexpected change phenomenon is shown by calculation and analysis to be owing to the change of the charge distribution approach at short separation distances, which is demonstrated to play a key role in the wide band coupling characteristic variation. With decreasing separation gap, a new coupling mechanism caused by surface charge properties is responsible for the decline in coupling absorption as well as the break in the ruler equations for both plasmon shift and temperature enhancement.

Gold nanocluster-loaded hybrid albumin nanoparticles with fluorescence-based optical visualization and photothermal conversion for tumor detection/ablation

Gold nanoclusters (AuNCs) are viewed as effective hyperthermal agents for the treatment of tumors. Whereas AuNCs formed by the agglomeration of several to tens of gold atoms (<1-2 nm) possess significant fluorescence, they have a negligible hyperthermal effect, while AuNCs comprised of spherical gold nanoparticles (AuNPs > a few nanometers) have a marked hyperthermic effect but lose their inherent fluorescence and obstruct the intensity of neighboring fluorescent dyes due to Forster resonance energy transfer (FRET). To achieve both hyperthermia and fluorescence-based optical visualization, we generated hybrid albumin nanoparticles containing AuNCs (~88 nm) comprising AuNPs (~4.5 nm). We generated a series of formulated AuNCs and optimized the size, morphology, NIR absorbance (600-900 nm), hyperthermal activity, and fluorescence spectral characters of the resulting hybrid albumin nanoparticles (AuNCs/BSA-NPs) by considering the interparticle distance between the AuNPs and Cy5.5. Among these, AuNCs/BSA-NPs (formula D) had a strong hyperthermic effect and had well-preserved fluorescence intensity (from the attached Cy5.5) due to localized surface plasmon resonance (LSPR) and a reduction in FRET. These AuNCs/BSA-NPs were able to elevate the surface tumor temperature of HCT116-bearing mice to >50 °C following 808 nm laser irradiation (1.5 W/cm², 10 min), which remarkably suppressed tumor growth (17.8 ± 16.9 mm³vs. PBS and AuNCs/BSA-NPs (formula E): ~1850 and ~1250 mm³, respectively). Also, Cy5.5-modified AuNCs/BSA-NPs (formula D) showed good performance in optical fluorescence imaging of target tumors in HCT116 tumor-bearing mice. Together, our results indicate that the interparticle distance between albumin or Cy5.5 and AuNPs/AuNCs can be optimized to achieve both hyperthermia and fluorescence emission by striking a balance between LSPR and FRET effects. We believe that the AuNC/BSA-NPs formulation presented here can serve as a potential platform for both optically visualizing and treating colon cancers.

Atomic switches of metallic point contacts by plasmonic heating

Electronic switches with nanoscale dimensions satisfy an urgent demand for further device miniaturization. A recent heavily investigated approach for nanoswitches is the use of molecular junctions that employ photochromic molecules that toggle between two distinct isoforms. In contrast to the reports on this approach, we demonstrate that the conductance switch behavior can be realized with only a bare metallic contact without any molecules under light illumination. We demonstrate that the conductance of bare metallic quantum contacts can be reversibly switched over eight orders of magnitude, which substantially exceeds the performance of molecular switches. After the switch process, the gap size between two electrodes can be precisely adjusted with subangstrom accuracy by controlling the light intensity or polarization. Supported by simulations, we reveal a more general and straightforward mechanism for nanoswitching behavior, i.e., atomic switches can be realized by the expansion of nanoelectrodes due to plasmonic heating.

Influence of Ag Nanoparticles with Different Sizes and Concentrations Embedded in a TiO2 Compact Layer on the Conversion Efficiency of Perovskite Solar Cells

In this study, Ag nanoparticles with diverse particle size and concentration, fabricated via the polyol method, were embedded in a TiO2 compact film to improve the power conversion efficiency of perovskite solar cells. Obtained results showed that Ag nanoparticles embedded in the TiO2 compact film do not affect the crystal structure of TiO2, while the size of the Ag nanoparticles can strongly influence the light absorption capacity of perovskite materials. However, the absorption intensity and power conversion efficiency of perovskite cells decreased with the increase in size of Ag nanoparticles. The amount of Ag nanoparticles was also an important factor for the performance of perovskite solar cells, and Ag nanoparticles in the compact layer were optimized to measure 10 nm in diameter, being embedded at a molar ratio of 1.5% (Ag:Ti = 1.5 mol%). Compared with hole-conductor-free perovskite solar cells that use carbon as counter electrodes, without Ag nanoparticles incorporated in the compact film, the enhanced efficiency of cells developed in this study can be mainly ascribed to the accelerated charge transfer, decreased charge recombination, and enhanced light absorption of the perovskite material in the visible region.

Thermoplasmonic Ignition of Metal Nanoparticles

Explosives, propellants, and pyrotechnics are energetic materials that can store and quickly release tremendous amounts of chemical energy. Aluminum (Al) is a particularly important fuel in many applications because of its high energy density, which can be released in a highly exothermic oxidation process. The diffusive oxidation mechanism (DOM) and melt-dispersion mechanism (MDM) explain the ways powders of Al nanoparticles (NPs) can burn, but little is known about the possible use of plasmonic resonances in NPs to manipulate photoignition. This is complicated by the inhomogeneous nature of powders and very fast heating and burning rates. Here, we generate Al NPs with well-defined sizes, shapes, and spacings by electron beam lithography and demonstrate that their plasmonic resonances can be exploited to heat and ignite them with a laser. By combining simulations with thermal-emission, electron-, and optical-microscopy studies, we reveal how an improved control over NP ignition can be attained.

A feasible strategy for self-assembly of gold nanoparticlesviadithiol-PEG for photothermal therapy of cancers

We designed and explored self-assembled gold nanoparticles (SAGNPs) by introducing dithiol modified polyethylene glycol (PEG) for internanoparticle cross-linking. SAGNPs could enhance uptake into cancer cells and be disintegrated by glutathione (GSH) to achieve tumor microenvironment-activated biodegradation. This assembled structure improved the photothermal effect compared to single gold nanospheres.

We designed and explored self-assembled gold nanoparticles (SAGNPs) by introducing dithiol modified polyethylene glycol (PEG) for internanoparticle cross-linking.

Controlling the Heat Dissipation in Temperature-Matched Plasmonic Nanostructures

Heat dissipation in a plasmonic nanostructure is generally assumed to be ruled only by its own optical response even though also the temperature should be considered for determining the actual energy-to-heat conversion. Indeed, temperature influences the optical response of the nanostructure by affecting its absorption efficiency. Here, we show both theoretically and experimentally how, by properly nanopatterning a metallic surface, it is possible to increase or decrease the light-to-heat conversion rate depending on the temperature of the system. In particular, by borrowing the concept of matching condition from the classical antenna theory, we first analytically demonstrate how the temperature sets a maximum value for the absorption efficiency and how this quantity can be tuned, thus leading to a temperature-controlled optical heat dissipation. In fact, we show how the nonlinear dependence of the absorption on the electron-phonon damping can be maximized at a specific temperature, depending on the system geometry. In this regard, experimental results supported by numerical calculations are presented, showing how geometrically different nanostructures can lead to opposite dependence of the heat dissipation on the temperature, hence suggesting the fascinating possibility of employing plasmonic nanostructures to tailor the light-to-heat conversion rate of the system.

Multibuilding Block Janus Synthesized by Seed-Mediated Self-Assembly for Enhanced Photothermal Effects and Colored Brownian Motion in an Optical Trap

The asymmetrical features and unique properties of multibuilding block Janus nanostructures (JNSs) provide superior functions for biomedical applications. However, their production process is very challenging. This problem has hampered the progress of JNS research and the exploration of their applications. In this study, an asymmetrical multibuilding block gold/iron oxide JNS has been generated to enhance photothermal effects and display colored Brownian motion in an optical trap. JNS is formed by seed-mediated self-assembly of nanoparticle-loaded thermocleavable micelles, where the hydrophobic backbones of the polymer are disrupted at high temperatures, resulting in secondary self-assembly and structural rearrangement. The JNS significantly enhances photothermal effects compared to their homogeneous counterpart after near-infrared (NIR) light irradiation. The asymmetrical distribution of gold and iron oxide within JNS also generates uneven thermophoretic force to display active colored Brownian rotational motion in a single-beam gradient optical trap. These properties indicate that the asymmetrical JNS could be employed as a strong photothermal therapy mediator and a fuel-free nanoscale Janus motor under NIR light.

Correlations of Optical Absorption, Charge Trapping, and Surface Roughness of TiO2 Photoanode Layer Loaded with Neat Ag-NPs for Efficient Perovskite Solar Cells

We systematically investigated the effect of silver nanoparticles (Ag-NPs) on the power conversion efficiency (PCE) of perovskite solar cells (PSCs). Neat, spherical Ag-NPs at loading levels of 0.0, 0.5, 1.0, and 2.0 wt % were embedded into the titanium dioxide (TiO2) photoanode layer. The plasmonic effect of the Ag-NPs strongly enhanced the incident light absorption over a wide range of the visible wavelength region in addition to the inherent absorbance of the perovskite sensitizer. The low conduction energy level of the Ag-NPs compared to that of TiO2 provides trap sites for free charge carriers. Thus, the correlation between the enhancement of the optical absorption and the number of charge traps provided by the Ag-NPs is critical to determine the device performance, especially current density (Jsc) and PCE. This is confirmed by the quantitative comparison of the incident light absorption and the time-resolved photoluminescence decay according to the loading levels of the Ag-NPs in the TiO2 layer. The absorption enhancement from 380 to 750 nm in the UV-visible spectrum is proportional to the increase in the loading levels of the Ag-NPs. However, the Jsc increases with the device with 0.5 wt % Ag-NPs and gradually decreases with increases in the loading level above 0.5 wt % because of the different contributions to the absorbance and the charge trapping by different Ag-NP loading levels. In addition, the suppression of the surface roughness with dense packing by the Ag-NPs helps to improve the Jsc and the following PCE. Consequently, the PCE of the PSC with 0.5 wt % Ag-NPs is increased to 11.96%. These results are attributed to the balance between increased absorbance by the localized surface plasmon resonance and the decreased charge trapping as well as the decreased surface roughness of the TiO2 layer with the Ag-NPs.

Localized surface plasmon enhanced photothermal conversion in Bi2Se3 topological insulator nanoflowers

Localized surface plasmons (LSP), the confined collective excitations of electrons in noble metal and doped semiconductor nanostructures, enhance greatly local electric field near the surface of the nanostructures and result in strong optical response. LSPs of ordinary massive electrons have been investigated for a long time and were used as basic ingredient of plasmonics and metamaterials. LSPs of massless Dirac electrons, which could result in novel tunable plasmonic metamaterials in the terahertz and infrared frequency regime, are relatively unexplored. Here we report for first time the observation of LSPs in Bi₂Se₃ topological insulator hierarchical nanoflowers, which are consisted of a large number of Bi₂Se₃ nanocrystals. The existence of LSPs can be demonstrated by surface enhanced Raman scattering and absorbance spectra ranging from ultraviolet to near-infrared. LSPs produce an enhanced photothermal effect stimulated by near-infrared laser. The excellent photothermal conversion effect can be ascribed to the existence of topological surface states, and provides us a new way for practical application of topological insulators in nanoscale heat source and cancer therapy.

Molding of Plasmonic Resonances in Metallic Nanostructures: Dependence of the Non-Linear Electric Permittivity on System Size and Temperature

In this paper, we review the principal theoretical models through which the dielectric function of metals can be described. Starting from the Drude assumptions for intraband transitions, we show how this model can be improved by including interband absorption and temperature effect in the damping coefficients. Electronic scattering processes are described and included in the dielectric function, showing their role in determining plasmon lifetime at resonance. Relationships among permittivity, electric conductivity and refractive index are examined. Finally, a temperature dependent permittivity model is presented and is employed to predict temperature and non-linear field intensity dependence on commonly used plasmonic geometries, such as nanospheres.