Compact surface plasmon-enhanced fluorescence biochip

Plasmon-enhanced fluorescence for biophotonics and bio-analytical applications

Fluorescence spectroscopy serves as an ultrasensitive sophisticated tool where background noises which serve as a major impediment to the detection of the desired signals can be safely avoided for detections down to the single-molecule levels. One such way of bypassing background noise is plasmon-enhanced fluorescence (PEF), where the interactions of fluorophores at the surface of metals or plasmonic nanoparticles are probed. The underlying condition is a significant spectral overlap between the localized surface plasmon resonance (LSPR) of the nanoparticle and the absorption or emission spectra of the fluorophore. The rationale being the coupling of the excited state of the fluorophore with the localized surface plasmon leads to an augmented emission, owing to local field enhancement. It is manifested in enhanced quantum yields concurrent with a decrease in fluorescence lifetimes, owing to an increase in radiative rate constants. This improvement in detection provided by PEF allows a significant scope of expansion in the domain of weakly emitting fluorophores which otherwise would have remained unperceivable. The concept of coupling of weak emitters with plasmons can bypass the problems of photobleaching, opening up avenues of imaging with significantly higher sensitivity and improved resolution. Furthermore, amplification of the emission signal by the coupling of free electrons of the metal nanoparticles with the electrons of the fluorophore provides ample opportunities for achieving lower detection limits that are involved in biological imaging and molecular sensing. One avenue that has attracted significant attraction in the last few years is the fast, label-free detection of bio-analytes under physiological conditions using plasmonic nanoparticles for point-of-care analysis. This review focusses on the applications of plasmonic nanomaterials in the field of biosensing, imaging with a brief introduction on the different aspects of LSPR and fabrication techniques.

Hot-Electron Dynamics Mediated Medical Diagnosis and Therapy

Surface plasmon resonance excitation significantly enhances the absorption of light and increases the generation of "hot" electrons, i.e., conducting electrons that are raised from their steady states to excited states. These excited electrons rapidly decay and equilibrate via radiative and nonradiative damping over several hundred femtoseconds. During the hot-electron dynamics, from their generation to the ultimate nonradiative decay, the electromagnetic field enhancement, hot electron density increase, and local heating effect are sequentially induced. Over the past decade, these physical phenomena have attracted considerable attention in the biomedical field, e.g., the rapid and accurate identification of biomolecules, precise synthesis and release of drugs, and elimination of tumors. This review highlights the recent developments in the application of hot-electron dynamics in medical diagnosis and therapy, particularly fully integrated device techniques with good application prospects. In addition, we discuss the latest experimental and theoretical studies of underlying mechanisms. From a practical standpoint, the pioneering modeling analyses and quantitative measurements in the extreme near field are summarized to illustrate the quantification of hot-electron dynamics. Finally, the prospects and remaining challenges associated with biomedical engineering based on hot-electron dynamics are presented.

Fluorescence enhancement of surface plasmon coupled emission by Au nanobipyramids and its modulation effect on multi-wavelength radiation

Surface plasmon coupled emission (SPCE), a novel surface-enhanced fluorescence technique, can generate directional and amplified radiation by the intense interaction between fluorophores and surface plasmons (SPs) of metallic nanofilms. For plasmon-based optical systems, the strong interaction between localized and propagating SPs and "hot spot" structures show great potential to significantly improve the electromagnetic (EM) field and modulate optical properties. Au nanobipyramids (NBPs) with two sharp apexes to enhance and restrict the EM field were introduced through electrostatic adsorption to achieve a mediated fluorescence system, and the emission signal enhancement was realized by factors over 60 compared with the normal SPCE. It has been demonstrated that the intense EM field produced by the NBPs assembly is what triggered the unique enhancement of SPCE by Au NBPs, which effectively overcomes the inherent signal quenching of SPCE for ultrathin sample detection. This remarkable enhanced strategy offers the chance to improve the detection sensitivity for plasmon-based biosensing and detection systems, and expand the range of applications for SPCE in bioimaging with more comprehensive and detailed information acquisition. The enhancement efficiency for various emission wavelengths was investigated in light of the wavelength resolution of SPCE, and it was discovered that enhanced emission for multi-wavelength could be successfully detected through the different emission angles due to the angular displacement caused by wavelength change. Benefit from this, the Au NBP modulated SPCE system was employed for multi-wavelength simultaneous enhancement detection under a single collection angle, which could broaden the application of SPCE in simultaneous sensing and imaging for multi-analytes, and expected to be used for high throughput detection of multi-component analysis.

Multiarchitecture-Based Plasmonic-Coupled Emission Employing Gold Nanoparticles: An Efficient Fluorescence Modulation and Biosensing Platform

Surface plasmon-coupled emission (SPCE) is an efficient surface-enhanced fluorescence method based on the near-field coupling process of surface plasmons and fluorophores. Based on this, we developed multiple coupling structures for an SPCE system by introducing gold nanoparticles (AuNPs) with different architectures by adjusting different modification methods and configurations. By assembling AuNPs on a gold substrate through electrostatic adsorption and spin-coating, 40- and 55-fold enhancements were obtained compared to free space (FS) emission, respectively. After theoretical simulations and the optimization of experimental conditions, a novel "hot-spot" plasmonic structure, an intense electromagnetic field within the system, plasmonic properties, and the coupled process were found to be mainly responsible for the diverse enhancement effects observed. For the spin-coating deposition method, new enhancing systems with high efficiency can be easily built without complex modification. Additionally, the subsequent detection system based on the uniform modification of AuNPs through electrostatic adsorption is convenient to establish with high sensitivity and stability, which can broaden the application of SPCE in both fluorescence-based sensing and imaging. This AuNP-enhanced SPCE using an electrostatic adsorption method was designed as an immunosensor to prove feasibility.

Amplified Fluorescence by Hollow-Porous Plasmonic Assembly: A New Observation and Its Application in Multiwavelength Simultaneous Detection

Surface plasmon coupled emission (SPCE) is a new analytical technique that provides increased and directional radiation based on the near-field interaction between fluorophores and surface plasmons but suffers from the limitation of insufficient sensitivity. The assembly of hollow-porous plasmonic nanoparticles could be the qualified candidate. After the introduction of gold nanocages (AuNCs), fluorescence signal enhancement was realized by factors over 150 and 600 compared with the normal SPCE and free space emission, respectively, with a fluorophore layer thickness of approximately 10 nm; hence, the unique enhancement of SPCE by the AuNCs effectively overcomes the signal quenching induced by resonance energy transfer (in normal SPCE). This enhancement was proven to be triggered by the superior wavelength match, the enhanced electromagnetic field, and new radiation channel and process induced by the AuNC assembly, which provides an opportunity to increase the detection sensitivity and establish an optimal plasmonic enhancement system. The amplified SPCE system was employed for multiwavelength simultaneous enhancement detection through the assembly of mixed hollow nanoparticles (AuNCs and gold nanoshells), which could broaden the application of SPCE in simultaneous sensing and imaging for multianalytes.

Peptides, DNA and MIPs in Gas Sensing. From the Realization of the Sensors to Sample Analysis

Detection and monitoring of volatiles is a challenging and fascinating issue in environmental analysis, agriculture and food quality, process control in industry, as well as in 'point of care' diagnostics. Gas chromatographic approaches remain the reference method for the analysis of volatile organic compounds (VOCs); however, gas sensors (GSs), with their advantages of low cost and no or very little sample preparation, have become a reality. Gas sensors can be used singularly or in array format (e.g., e-noses); coupling data output with multivariate statical treatment allows un-target analysis of samples headspace. Within this frame, the use of new binding elements as recognition/interaction elements in gas sensing is a challenging hot-topic that allowed unexpected advancement. In this review, the latest development of gas sensors and gas sensor arrays, realized using peptides, molecularly imprinted polymers and DNA is reported. This work is focused on the description of the strategies used for the GSs development, the sensing elements function, the sensors array set-up, and the application in real cases.

Excitation-Emission Synchronization-Mediated Directional Fluorescence: Insight into Plasmon-Coupled Emission at Vibrational Resolution

Light-matter interactions have always been a fundamentally significant topic that has attracted much attention. It is important to reveal a fluorophore-plasmon interaction on the nanoscale. However, as a powerful investigative tool, fluorescence spectroscopy still suffers from a limited spectral resolution and the susceptibility to interfering substances. In this work, excitation-emission synchronization-mediated surface-plasmon-coupled emission (EES-SPCE) is proposed to break the bottleneck. By actively screening the energy transitions for observation, an improved spectral resolution has been achieved, which is advantageous to the investigation of the fluorophore-plasmon interactions under different coupling modes. The spectral information related to the plasmonic interactions through tuning vibrational energy levels is clearly distinguished at directional emission angles. EES-SPCE is demonstrated to selectively and efficiently extract the coupled emission from the vibrational resolution, which would open up the opportunity to improve the capability of spectral feature identification and signal collection for practical applications of plasmonic fluorescence spectroscopy.

Plasmonic coloration of silver nanodome arrays for a smartphone-based plasmonic biosensor

In this study, the utility of plasmonic coloration on silver nanodome arrays for sensitive and quantitative detection of biomolecules using a smartphone-based sensor is proposed. In particular, a quantitative analysis of DNA hybridization was achieved using the hue angle in the HSV color space obtained from a photograph of a sensing spot taken using a smartphone camera. Silver and gold nanodome arrays consisting of a polystyrene bead layer covered with a thin metal film can be created over a large area by a bottom-up fabrication process. The metal nanodome arrays exhibited unique colorations which can be tuned by the dome diameter ϕ, metal species, and refractive index of the surrounding medium. The measurement of the bulk refractive index sensitivity revealed that the Ag nanodome with ϕ = 500 nm can provide the highest sensitivity of up to 588 nm per refractive index unit. The detection of DNA hybridization was performed by using a bimetallic nanodome consisting of silver and thin gold overlayers and DNA modified gold nanoparticles (AuNPs) for enhancing the sensor signals. Upon the immobilization of AuNPs, the Ag nanodome (ϕ = 200 nm) exhibited a large shift in the resonance wavelength accompanied by a dramatic change in coloration. The analysis of detection sensitivity of DNA hybridization using a model system revealed that colorimetric detection based on hue can be used for the quantitative detection of biomolecules in the same manner as the spectroscopic method with a few pM level of detectable concentration.

Massive Enhancement of Optical Transmission across a Thin Metal Film via Wave Vector Matching in Grating-Coupled Surface Plasmon Resonance

We demonstrate how distinct surface plasmon resonance modes on opposite sides of a metal-coated grating can be coupled across the metal film. This coupling occurs by matching the resonance conditions on each side of the grating by tuning the refractive index directly adjacent to the metal film. In the first example, we deposited a high refractive index layer of tin oxide on top of the grating to red-shift the front side surface plasmon until it coupled with the backside surface plasmon across a semitransparent ∼45 nm thin silver grating. By shifting the resonance condition of the nearby surface plasmon, this high refractive index coating creates an effective matching of wave vectors across the metal film, allowing them to couple and enhance the optical response. A massive increase in the magnitude of enhanced transmission is observed, increasing from a 6-fold transmission enhancement through a bare silver grating to a near 100-fold enhancement after deposition of a tin oxide layer of appropriate thickness (∼310 nm). This optical transmission enhancement is then probed through computational modeling and by experiments with liquids of various refractive index values. The matched system shows an increased amplitude sensitivity with respect to refractive index changes and a waveguide like behavior within the tin oxide film. As an alternative configuration, we also demonstrate coupling the front and back-side plasmon modes by using a lower refractive index substrate in order to blue-shift the back-side surface plasmon. Coupling between the two plasmon modes is then demonstrated by introducing aqueous solutions of various refractive index values. Under the proper conditions, this matched system also shows a substantial enhancement in transmission. This technique of wave vector matching provides a route to substantially increasing the plasmon enhanced optical transmission through metal gratings, which has potential application in improved plasmonic sensing, spectroscopy, and plasmon-based optical devices.

Distinguishing between whole cells and cell debris using surface plasmon coupled emission

Distinguishing between whole cells and cell debris is important in microscopy, e.g., in screening of pulmonary patients for infectious tuberculosis. We propose and theoretically demonstrate that whole cells and cell debris can be distinguished from the far-field pattern of surface plasmon coupled emission (SPCE) of a fluorescently-labeled sample placed on a thin metal layer. If fluorescently-labeled whole cells are placed on the metal film, SPCE takes place simultaneously at two or more different angles and creates two or more distinct rings in the far field. By contrast, if fluorescently-labeled cell debris are placed on the metal film, SPCE takes place at only one angle and creates one ring in the far-field. We find that the angular separation of the far-field rings is sufficiently distinct to use the presence of one or more rings to distinguish between whole cells and cell debris. The proposed technique has the potential for detection without the use of a microscope.

Metal Nanoparticles/Porous Silicon Microcavity Enhanced Surface Plasmon Resonance Fluorescence for the Detection of DNA

A porous silicon microcavity (PSiMC) with resonant peak wavelength of 635 nm was fabricated by electrochemical etching. Metal nanoparticles (NPs)/PSiMC enhanced fluorescence substrates were prepared by the electrostatic adherence of Au NPs that were distributed in PSiMC. The Au NPs/PSiMC device was used to characterize the target DNA immobilization and hybridization with its complementary DNA sequences marked with Rhodamine red (RRA). Fluorescence enhancement was observed on the Au NPs/PSiMC device substrate; and the minimum detection concentration of DNA ran up to 10 pM. The surface plasmon resonance (SPR) of the MC substrate; which is so well-positioned to improve fluorescence enhancement rather the fluorescence enhancement of the high reflection band of the Bragg reflector; would welcome such a highly sensitive in biosensor.

Carbon Nanotubes as Fluorescent Labels for Surface Plasmon Resonance-Assisted Fluoroimmunoassay

The photoluminescence properties of carbon nanotubes (CNTs), including the large Stokes shift and the absence of fluorescent photobleaching, can be used as a fluorescent label in biological measurements. In this study, the performance of CNTs as a fluorescent label for surface plasmon resonance (SPR)-assisted fluoroimmunoassay is evaluated. The fluorescence of (8, 3) CNTs with an excitation wavelength of 670 nm and an emission wavelength of 970 nm is observed using a sensor chip equipped with a prism-integrated microfluidic channel to excite the SPR. The minimum detectable concentration of a CNT dispersed in water using a visible camera is 0.25 μg/mL, which is equivalent to 2 × 10¹⁰ tubes/mL. The target analyte detection using the CNT fluorescent labels is theoretically investigated by evaluating the detectable number of CNTs in a detection volume. Assuming detection of virus particles which are bound with 100 CNT labels, the minimum number of detectable virus particles is calculated to be 900. The result indicates that CNTs are effective fluorescent labels for SPR-assisted fluoroimmunoassay.

Design rules for combined label-free and fluorescence Bloch surface wave biosensors

We report on the fabrication and physical characterization of optical biosensors implementing simultaneous label-free and fluorescence detection and taking advantage of the excitation of Bloch surface waves at a photonic crystal's truncation interface. Two types of purposely designed one-dimensional photonic crystals on molded organic substrates with micro-optics were fabricated. These crystals feature either high or low finesse of the Bloch surface wave resonances and were tested on the same optical readout system. The experimental results show that designing biochips with a large resonance quality factor does not necessarily lead in the real case to an improvement of the biosensor performance. The conditions for optimal biochip design and operation of the complete bio-sensing platform are established.

Spacer-controlled emission of randomly oriented fluorophores enhanced with surface plasmon-polaritons

In surface plasmon-polariton enhanced fluorescence, the use of spacers is simply understood to control the distance between the fluorescence dyes and metals to avoid quenching. However, the presence of a spacer layer over the metallic surface not only manipulates the quantum yield, but also affects the surface plasmon-polariton resonance, which in turn modifies the florescence excitation rate as well as the far-field radiation pattern of the emission. This study presents a systematic investigation on the spacer-controlled emission of randomly oriented emitters in the Kretschmann configuration, with the full leverage of the coupled transfer matrix, reciprocity and plane-wave decomposition methods. It demonstrates that the introduction of a spacer between the metal film and fluorescence dyes decreases the excitation rate. Furthermore, the excitation rate decreases more for spacers with a higher refractive index due to the reduction of the effective power that goes into the resonance excitation. Combining the excitation rate with the quantum yield and photon-collection efficiency, the detected fluorescence enhancement from either the medium side or substrate side is determined and optimized for the spacer thickness and material. It was found that the highest enhancement of a randomly oriented fluorophore's emission was generally achieved in detection from the substrate side with a low refractive index spacer (e.g. Teflon and SiO₂). In addition, the substrate-side measurements were thought to benefit from highly directional radiation and a more stable enhancement compared to the medium-side measurements. Our results clearly reveal physical insights into the spacer-controlled emission and provide concrete guidance in the design and measurement of fluorescence-based sensing and imaging systems.

Enhanced intrinsic fluorescence from carboxidized nano-sculptured thin films of silver and their application for label free dual detection of glycated hemoglobin

Enhanced intrinsic fluorescence (~x10³) from novel carboxidized nanosculptured thin films (CO-nSTFs) of silver is reported. The sources of intrinsic fluorescence, confirmed by X-ray photoelectron spectroscopy, are Ag₂O grains and residual carbon formed on the outer layer of silver nSTFs when exposed to air, while the localized surface plasmons on silver nSTFs enhance this intrinsic fluorescence. The CO-nSTFs are optimized with respect to porosity for the maximum enhancement. A sensor developed by using the self-assembled monolayer technique on optimized CO-nSTF is used for the label free detection of glycated hemoglobin, performed by simultaneously using fluorescence imaging and spectroscopy. The specificity of the sensor is established from control experiments on hemoglobin. These novel nanorod like intrinsically fluorescent CO-nSTFs pose huge potential in label free biosensing, light sources, imaging and many more applications.

Plasmonic Hepatitis B Biosensor for the Analysis of Clinical Saliva

A biosensor for the detection of hepatitis B antibodies in clinical saliva was developed. Compared to conventional analysis of blood serum, it offers the advantage of noninvasive collection of samples. Detection of biomarkers in saliva imposes two major challenges associated with the low analyte concentration and increased surface fouling. The detection of minute amounts of hepatitis B antibodies was performed by plasmonically amplified fluorescence sandwich immunoassay. To have access to specific detection, we prevented the nonspecific adsorption of biomolecules present in saliva by brushes of poly[(N-(2-hydroxypropyl) methacrylamide)-co-(carboxybetaine methacrylamide)] grafted from the gold sensor surface and post modified with hepatitis B surface antigen. Obtained results were validated against the response measured with ELISA at a certified laboratory using serum from the same patients.

Surface Plasmon Resonance: A Boon for Viral Diagnostics

Rapidly evolving viral strains leading to epidemics and pandemics necessitates quick diagnostics and treatment to halt the progressive march of the disease. Optical biosensors like surface plasmon resonance (SPR) have emerged in recent times as a most reliable diagnostic device owing to their portability, reproducibility, sensitivity and specificity. SPR analyzes the kinetics of biomolecular interactions in a label-free manner. It has surpassed the conventional virus detection methods in its utility, particularly in medical diagnostics and healthcare. However, the requirement of high-end infrastructure setup and trained manpower are some of the roadblocks in realizing the true potential of SPR. This platform needs further improvisation in terms of simplicity, affordability and portability before it could be utilized in need-based remote areas of under-developed and developing countries with limited infrastructure.

Detection of norovirus virus-like particles using a surface plasmon resonance-assisted fluoroimmunosensor optimized for quantum dot fluorescent labels

A highly sensitive biosensor to detect norovirus in environment is desired to prevent the spread of infection. In this study, we investigated a design of surface plasmon resonance (SPR)-assisted fluoroimmunosensor to increase its sensitivity and performed detection of norovirus virus-like particles (VLPs). A quantum dot fluorescent dye was employed because of its large Stokes shift. The sensor design was optimized for the CdSe-ZnS-based quantum dots. The optimal design was applied to a simple SPR-assisted fluoroimmunosensor that uses a sensor chip equipped with a V-shaped trench. Excitation efficiency of the quantum dots, degree of electric field enhancement by SPR, and intensity of autofluorescence of a substrate of the sensor chip were theoretically and experimentally evaluated to maximize the signal-to-noise ratio. As the result, an excitation wavelength of 390nm was selected to excite SPR on an Al film of the sensor chip. The sandwich assay of norovirus VLPs was performed using the designed sensor. Minimum detectable concentration of 0.01ng/mL, which corresponds to 100 virus-like particles included in the detection region of the V-trench, was demonstrated.

Plasmonically amplified bioassay - Total internal reflection fluorescence vs. epifluorescence geometry

This paper investigates plasmonic amplification in two commonly used optical configurations for fluorescence readout of bioassays - epifluorescence (EPF) and total internal reflection fluorescence (TIRF). The plasmonic amplification in the EPF configuration was implemented by using crossed gold diffraction grating and Kretschmann geometry of attenuated total reflection method (ATR) was employed in the TIRF configuration. Identical assay, surface architecture for analyte capture, and optics for the excitation, collection and detection of emitted fluorescence light intensity were used in both TIRF and EPF configurations. Simulations predict that the crossed gold diffraction grating (EPF) can amplify the fluorescence signal by a factor of 10(2) by the combination of surface plasmon-enhanced excitation and directional surface plasmon-coupled emission in the red part of spectrum. This factor is about order of magnitude higher than that predicted for the Kretschmann geometry (TIRF) which only took advantage of the surface plasmon-enhanced excitation. When applied for the readout of sandwich interleukin 6 (IL-6) immunoassay, the plasmonically amplified EPF geometry designed for Alexa Fluor 647 labels offered 4-times higher fluorescence signal intensity compared to TIRF. Interestingly, both geometries allowed reaching the same detection limit of 0.4pM despite of the difference in the fluorescence signal enhancement. This is attributed to inherently lower background of fluorescence signal for TIRF geometry compared to that for EPF which compensates for the weaker fluorescence signal enhancement. The analysis of the inflammation biomarker IL-6 in serum at medically relevant concentrations and the utilization of plasmonic amplification for the fluorescence measurement of kinetics of surface affinity reactions are demonstrated for both EPF and TIRF readout.

Fluorescence enhancement in visible light: dielectric or noble metal?

A comprehensive comparison is conducted between a dielectric and plasmonic metal to evaluate their capability and applicability in fluorescence enhancement.

Plasmonic amplification for bioassays with epi-fluorescence readout

Corrugated metallic surfaces offer means for efficient amplification of fluorescence bioassay signal based on the near field coupling between surface plasmons and fluorophore emitters that are used as labels. This paper discusses the design of such plasmonic structure to enhance the sensitivity of immunoassays with epi-fluorescence readout geometry. In particular, crossed gold grating is theoretically and experimentally investigated for combined increasing of the excitation rate at the fluorophore excitation wavelength and utilizing directional surface plasmon-coupled fluorescence emission. For Alexa Fluor 647 dye, the enhancement factor of around EF = 10² was simulated and experimentally measured. When applied to a sandwich interleukin-6 immunoassay, highly surface-selective enhancement reaching a similar value was observed. Besides increasing the measured fluorescence signal associated with the molecular binding events on a surface by two orders of magnitude, the presented approach enables measuring kinetics of the surface reaction that is otherwise masked by strong background signal originating from bulk solution.

Combining label-free and fluorescence operation of Bloch surface wave optical sensors

We report on the design, fabrication, and characterization of optical sensors based on Bloch surface waves propagating at the truncation edge of one-dimensional photonic crystals. The sensors can be simultaneously operated in both a label-free mode, where small refractive index changes at the surface are detected, and a fluorescence mode, where the fluorescence from a novel heptamethyne dye label in the proximity of the surface is collected. The two modes operate in the near-infrared spectral range with the same configuration of the optical reading apparatus. The limit of detection is shown to be smaller than that of equivalent surface plasmon sensors and the fluorescence collection efficiency is such that it can be efficiently analyzed by the same camera sensor used for label-free operation.

Plasmon-Enhanced Fluorescence Biosensors: a Review

Surfaces of metallic films and metallic nanoparticles can strongly confine electromagnetic field through its coupling to propagating or localized surface plasmons. This interaction is associated with large enhancement of the field intensity and local optical density of states which provides means to increase excitation rate, raise quantum yield, and control far field angular distribution of fluorescence light emitted by organic dyes and quantum dots. Such emitters are commonly used as labels in assays for detection of chemical and biological species. Their interaction with surface plasmons allows amplifying fluorescence signal (brightness) that accompanies molecular binding events by several orders of magnitude. In conjunction with interfacial architectures for the specific capture of target analyte on a metallic surface, plasmon-enhanced fluorescence (PEF) that is also referred to as metal-enhanced fluorescence (MEF) represents an attractive method for shortening detection times and increasing sensitivity of various fluorescence-based analytical technologies. This review provides an introduction to fundamentals of PEF, illustrates current developments in design of metallic nanostructures for efficient fluorescence signal amplification that utilizes propagating and localized surface plasmons, and summarizes current implementations to biosensors for detection of trace amounts of biomarkers, toxins, and pathogens that are relevant to medical diagnostics and food control.

Trends and challenges of refractometric nanoplasmonic biosensors: a review

Motivated by potential benefits such as sensor miniaturization, multiplexing opportunities and higher sensitivities, refractometric nanoplasmonic biosensing has profiled itself in a short time span as an interesting alternative to conventional Surface Plasmon Resonance (SPR) biosensors. This latter conventional sensing concept has been subjected during the last decades to strong commercialization, thereby strongly leaning on well-developed thin-film surface chemistry protocols. Not surprisingly, the examples found in literature based on this sensing concept are generally characterized by extensive analytical studies of relevant clinical and diagnostic problems. In contrast, the more novel Localized Surface Plasmon Resonance (LSPR) alternative finds itself in a much earlier, and especially, more fundamental stage of development. Driven by new fabrication methodologies to create nanostructured substrates, published work typically focuses on the novelty of the presented material, its optical properties and its use - generally limited to a proof-of-concept - as a label-free biosensing scheme. Given the different stages of development both SPR and LSPR sensors find themselves in, it becomes apparent that providing a comparative analysis of both concepts is not a trivial task. Nevertheless, in this review we make an effort to provide an overview that illustrates the progress booked in both fields during the last five years. First, we discuss the most relevant advances in SPR biosensing, including interesting analytical applications, together with different strategies that assure improvements in performance, throughput and/or integration. Subsequently, the remaining part of this work focuses on the use of nanoplasmonic sensors for real label-free biosensing applications. First, we discuss the motivation that serves as a driving force behind this research topic, together with a brief summary that comprises the main fabrication methodologies used in this field. Next, the sensing performance of LSPR sensors is examined by analyzing different parameters that can be invoked in order to quantitatively assess their overall sensing performance. Two aspects are highlighted that turn out to be especially important when trying to maximize their sensing performance, being (1) the targeted functionalization of the electromagnetic hotspots of the nanostructures, and (2) overcoming inherent negative influence that stem from the presence of a high refractive index substrate that supports the nanostructures. Next, although few in numbers, an overview is given of the most exhaustive and diagnostically relevant LSPR sensing assays that have been recently reported in literature, followed by examples that exploit inherent LSPR characteristics in order to create highly integrated and high-throughput optical biosensors. Finally, we discuss a series of considerations that, in our opinion, should be addressed in order to bring the realization of a stand-alone LSPR biosensor with competitive levels of sensitivity, robustness and integration (when compared to a conventional SPR sensor) much closer to reality.