Hybridization of optical plasmonics with terahertz metamaterials to create multi-spectral filters

Independently tunable all-dielectric synthetic multi-spectral metamaterials based on Mie resonance

A single metamaterial (MM) is generally designed to operate in only one band, and the MMs with different dimensions of meta-atoms are required to be integrated to achieve multi-spectral responses simultaneously. In this study, an all-dielectric synthetic multi-spectral metamaterial (SMM) that can efficiently operate in the visible and terahertz (THz) ranges by incorporating nanoscale features into microscale unit cells is demonstrated and investigated numerically. The resonant frequency of the proposed SMM in both regimes can be tuned independently by changing the geometric parameters such as diameter, gap, width and height of unit cells functional in two different regions, whilst maintaining high reflectance efficiency. Results show that a variety of colors can be produced from red to purple in the visible range with maximal reflectance as high as 83% while the peak frequency of the SMM can be adjusted from 8.12 to 2.13 THz in the THz range with maximum reflectance up to 94%. The reflection characteristics of the SMM mainly originate from the electric dipole (ED) and magnetic dipole (MD) resonances via Mie scattering in both regions. The strategy of this research offers the possibility of applications in bio/chemical sensing, multi-spectral imaging, filtering, detection, modulation and so on.

Covert infrared image encoding through imprinted plasmonic cavities

Functional surfaces that can control light across the electromagnetic spectrum are highly desirable. Plasmonic nanostructures can assume this role by exhibiting dimension-tunable resonances that span multiple electromagnetic regimes. However, changing these structural parameters often impacts the higher-order resonances and spectral features in lower-wavelength domains. In this study, we discuss a cavity-coupled plasmonic system with resonances that are tunable across the 3–5 or 8–14 μm infrared bands while retaining near-invariant spectral properties in the visible domain. This result is accomplished by regime-dependent resonance mechanisms and their dependence on independent structural parameters. Through the identification and constraint of key parameters, we demonstrate multispectral data encoding, where images, viewable in the infrared spectral domain, appear as uniform areas of color in the visible domain—effectively hiding the information. Fabricated by large area nanoimprint lithography and compatible with flexible surfaces, the proposed system can produce multifunctional coatings for thermal management, camouflage, and anti-counterfeiting.

CMOS compatible metamaterial absorbers for hyperspectral medium wave infrared imaging and sensing applications

We experimentally demonstrate a CMOS compatible medium wave infrared metal-insulator-metal (MIM) metamaterial absorber structure where for a single dielectric spacer thickness at least 93% absorption is attained for 10 separate bands centred at 3.08, 3.30, 3.53, 3.78, 4.14, 4.40, 4.72, 4.94, 5.33, 5.60 μm. Previous hyperspectral MIM metamaterial absorber designs required that the thickness of the dielectric spacer layer be adjusted in order to attain selective unity absorption across the band of interest thereby increasing complexity and cost. We show that the absorption characteristics of the hyperspectral metamaterial structures are polarization insensitive and invariant for oblique incident angles up to 25° making them suitable for practical implementation in an imaging system. Finally, we also reveal that under TM illumination and at certain oblique incident angles there is an extremely narrowband Fano resonance (Q > 50) between the MIM absorber mode and the surface plasmon polariton mode that could have applications in hazardous/toxic gas identification and biosensing.

Dual mode operation, highly selective nanohole array-based plasmonic colour filters

Taking advantage of nanostructured metal films as plasmonic colour filters (PCFs) has been evolved remarkably as an alternative to the conventional technologies of chemical colour filtering. However, most of the proposed PCFs depict a poor colour purity focusing on generating either the additive or subtractive colours. In this paper, we present dual mode operation PCFs employing an opaque aluminium film patterned with sub-wavelength holes. Subtractive colours like cyan, magenta, and yellow are the results of reflection mode of these filters yielding optical efficiencies as high as 70%-80% and full width at half maximum of the stop-bands up to 40-50 nm. The colour selectivity of the transmission mode for the additive colours is also significant due to their enhanced performance through the utilization of a relatively thick aluminium film in contact with a modified dielectric environment. These filters provide a simple design with one-step lithography in addition to compatibility with the conventional CMOS processes. Moreover, they are polarization insensitive due to their symmetric geometry. A complete palette of pure subtractive and additive colours has been realized with potential applications, such as multispectral imaging, CMOS image sensors, displays, and colour printing.

Multi-spectral materials: hybridisation of optical plasmonic filters, a mid infrared metamaterial absorber and a terahertz metamaterial absorber

Multi-spectral imaging systems typically require the cumbersome integration of disparate filtering materials and detectors in order to operate simultaneously in multiple spectral regions. Each distinct waveband must be detected at different spatial locations on a single chip or by separate chips optimised for each band. Here, we report on a single component that optically multiplexes visible, Mid Infrared (4.5 μm) and Terahertz (126 μm) radiation thereby maximising the spectral information density. We hybridise plasmonic and metamaterial structures to form a device capable of simultaneously filtering 15 visible wavelengths and absorbing Mid Infrared and Terahertz. Our synthetic multi-spectral component could be integrated with silicon complementary metal-oxide semiconductor technology where Si photodiodes are available to detect the visible radiation and micro-bolometers available to detect the Infrared/Terahertz and render an inexpensive, mass-producible camera capable of forming coaxial visible, Infrared and Terahertz images.

THz wave in double-metal-film waveguides and the application of wavelength analysis

We propose the double-metal-film waveguides for terahertz (THz) wave guiding. The loss and field features are analyzed. In the application of wavelength analysis, the formula of the wavelength has been derived, and it can be used to analyze the wavelength of the THz sources according to mode field distribution in the dielectric-substrate slab. The penetrating capability of the THz wave is also discussed for different structures. When there is more energy in the dielectric-substrate slab, it will be better for wavelength analysis.

Terahertz wave transmission within metal-clad antiresonant reflecting hollow waveguides

We present the transmission characteristics of THz waves in metal-clad antiresonant reflecting hollow waveguides. We have derived the equation for the blueshift of the resonance frequency. The effects of the waveguide structure on the blueshift of the resonance frequency are studied comprehensively. In particular, we find that the blueshift of the resonance frequency is strongly affected by the interval between two dielectric slabs. By changing the interval, we find that the maximum frequency-tuning range is up to 2030 GHz and the maximum sensitivity of the resonance frequency shift is up to 6950 GHz/mm at the resonance order of m=1. When the THz wave is at the near-zero loss frequency, both the loss and the dispersion of the guide modes are very low.

Multispectral metamaterial absorber

We present the simulation, implementation, and measurement of a multispectral metamaterial absorber (MSMMA) and show that we can realize a simple absorber structure that operates in the mid-IR and terahertz (THz) bands. By embedding an IR metamaterial absorber layer into a standard THz metamaterial absorber stack, a narrowband resonance is induced at a wavelength of 4.3 μm. This resonance is in addition to the THz metamaterial absorption resonance at 109 μm (2.75 THz). We demonstrate the inherent scalability and versatility of our MSMMA by describing a second device whereby the MM-induced IR absorption peak frequency is tuned by varying the IR absorber geometry. Such a MSMMA could be coupled with a suitable sensor and formed into a focal plane array, enabling multispectral imaging.