Efficient flat metasurface lens for terahertz imaging

Reconfigurable Tri-Mode Metasurface for Broadband Low Observation, Wide-Range Tracing, and Backscatter Communication

In the current prevalent complex electromagnetic (EM) environment, intelligent methods for versatile and integrated control of EM waves using compact devices are both essential and challenging. These varied wave control objectives can at times conflict with one another, such as the need for broad absorption to remain inconspicuous, while also requiring enhanced backward scattering for highly reliable tracing and secure communication. To address these sophisticated challenges, a microwave-frequency reconfigurable tri-mode metasurface (RTMM) is introduced. The proposed innovation enables three distinct operational modes: broadband low observation, enhanced EM wave tracing, and backscatter communication over a wide-angle range by simple control of the PIN diodes embedded in each meta-atom. The proof-of-concept demonstration of the fabricated prototype verified the switchable tri-mode performance of the RTMM. This proposed RTMM can be adapted to various applications, including EM shielding, target detection, and secure communication in complex and threatening EM environments, paving the way for environmentally-adaptive EM wave manipulation.

Emulating the Deutsch-Josza algorithm with an inverse-designed terahertz gradient-index lens

An all-dielectric photonic metastructure is investigated for application as a quantum algorithm emulator (QAE) in the terahertz frequency regime; specifically, we show implementation of the Deustsh-Josza algorithm. The design for the QAE consists of a gradient-index (GRIN) lens as the Fourier transform subblock and patterned silicon as the oracle subblock. First, we detail optimization of the GRIN lens through numerical analysis. Then, we employed inverse design through a machine learning approach to further optimize the structural geometry. Through this optimization, we enhance the interaction of the incident light with the metamaterial via spectral improvements of the outgoing wave.

Identification and quantitative detection of two pathogenic bacteria based on a terahertz metasensor

Bacterial infection can cause a series of diseases and play a vital role in medical care. Therefore, early diagnosis of pathogenic bacteria is crucial for effective treatment and the prevention of further infection. However, restricted by the current technology, bacterial detection is usually time-consuming and laborious and the samples need tedious processing even to be tested. Herein, we present a terahertz metasensor based on the coupling of electrical and toroidal dipoles to achieve rapid, non-destructive, label-free identification and highly sensitive quantitative detection of the two most common pathogenic bacteria. The reinforcement of the toroidal dipole significantly boosts the light-matter interactions around the surface of the microstructure, and thus the sensitivity and Q factor of the designed metasensor reach as high as 378 GHz per refractive index unit (RIU) and 21.28, respectively. Combined with the aforementioned advantages, the proposed metasensor successfully identified Escherichia coli and Staphylococcus aureus and quantitatively detected four concentrations with the lowest detectable concentration being ∼10⁴ cfu mL^-1 in the experiment. This work naturally enriches the research on THz metasensors based on the interference mechanism and inspires more innovations to facilitate the development of biosensing applications.

Anti-reflecting metasurface for broadband polarization independent absorption at Ku band frequencies

An impedance matched metasurface can efficiently channel the electromagnetic fields for maximum power transfer. The thin film based impedance matching techniques often utilize highly dissipative materials and destructive interference of reflection components from multiple subwavelength layers. Here, we propose a novel method to achieve anti reflection characteristics through destructive interference of antiparallel electromagnetic scattering emerging from chiral metasurface. The supercell structure of metasurface consists of four adjacent multi split-rings on FR-4 substrate. The split-rings are arranged to induce anti-parallel surface currents leading to destructive interference for scattered fields. The antireflection characteristics results in near perfect broadband absorption at dual frequency bands. A broadband absorption of 983 MHz is achieved between 12.687 and 13.669 GHz. Similarly, a narrow band absorption of 108 MHz is achieved in frequency range of 15.307–15.415 GHz. The impedance matched with unique symmetric design of supercell results in identical absorption for both x- and y-polarized incident fields. The numerical and experimental results verify broadband absorption characteristics at Ku band frequencies. The proposed metasurface absorber can be used for microwave energy harvesting applications.

Dual-channel geometric meta-holograms with complex-amplitude modulation based on bi-spectral single-substrate-layer meta-atoms

Metasurfaces with complex-amplitude modulation are superior in power regulation and hologram imaging resolution compared with those with phase-only modulation. Nevertheless, a single-cell metasurface with multi-band independent phase and amplitude controls is still a great challenge for the circularly polarized incidences. In this work, we propose and design a single-substrate-layer single-cell metasurface with independent complex-amplitude modulations at two discrete frequencies. Based on this emerging technique, a bi-spectral meta-hologram is designed and verified by both full-wave simulations and experiments, which could reconstruct two Chinese characters at the imaging plane at two frequencies. The proposed method shows great potential in multifunctional meta-devices with enhanced performance.

Mid-Infrared Broadband Achromatic Metalens with Wide Field of View

Metasurfaces have the ability to flexibly control the light wavefront, and they are expected to fill the gaps of traditional optics. However, various aberrations pose challenges for the application of metasurfaces in the wide angle and wide spectral ranges. The previous multi-aberration simultaneous optimization works had shortcomings such as large computational load, complex structure, and low generality. Here, we propose a metalens design method that corrects both monochromatic and chromatic aberrations simultaneously. The monochromatic aberration-corrected phase distribution is obtained by the optical design, and the chromatic aberration is reduced by using the original search algorithm combined with dispersion engineering. The designed single-layered wide-angle achromatic metalens has a balanced and efficient focusing effect in the mid-infrared band from 3.7 μm to 5 μm and a wide angle of ±30°. The design method proposed has the advantages of low computational load, wide application range, and easy experimental fabrication, which provides new inspiration for the development of generalized software for the design and optimization of metasurfaces.

Polarization-sensitive tunable extraordinary terahertz transmission based on a hybrid metal-vanadium dioxide metasurface

Thermally tunable extraordinary terahertz transmission in a hybrid metal-vanadium dioxide (VO₂) metasurface is numerically demonstrated. The metasurface consists of a metal sheet perforated by square loops, while the loops are connected with strips of VO₂. The frequency and amplitude of the transmission resonance are modulated by controlling the conductivity of VO₂. For a y-polarized incident field, the resonance transmission peak redshifts from 0.88 to 0.81 THz upon insulator-to-metallic phase transition of VO₂. For an x-polarized incident field, the transmission resonance at 0.81 THz is observed in the insulator phase. However, in the metallic phase of VO₂, the electromagnetic field is effectively reflected in the 0.5-1.1 THz range with a transmission level lower than 0.14. The proposed metasurface can be utilized as a terahertz modulator, reconfigurable filter, or switch.

Automatic and inverse design of broadband terahertz absorber based on optimization of genetic algorithm for dual metasurfaces

In this study, we introduce a genetic algorithm (GA) into the catenary theory model to achieve automatic and inverse design for terahertz (THz) metasurface absorbers. The GA method was employed by seeking optimal dispersion distributions to achieve broadband impedance matching. A THz dual-metasurface absorber was designed using the proposed approach. The designed metasurface absorber exhibits an absorbance exceeding 88% at 0.21-5 THz. Compared to the traditional design method, the proposed method can reduce time consumption and find the optimal result to achieve high performance. The investigations provide important guidance and a promising approach for designing metasurface-based devices for practical applications.

Active and Smart Terahertz Electro-Optic Modulator Based on VO2 Structure

Modulating terahertz (THz) waves actively and smartly through an external field is highly desired in the development of THz spectroscopic devices. Here, we demonstrate an active and smart electro-optic THz modulator based on a strongly correlated electron oxide vanadium dioxide (VO2). With milliampere current excitation on the VO2 thin film, the transmission, reflection, absorption, and phase of THz waves can be modulated efficiently. In particular, the antireflection condition can be actively achieved and the modulation depth reaches 99.9%, accompanied by a 180° phase switching. Repeated and current scanning experiments confirm the high stability and multibit modulation of this electro-optic modulation. Most strikingly, by utilizing a feedback loop of "THz-electro-THz" geometry, a smart electro-optic THz control is realized. For instance, the antireflection condition can be stabilized precisely no matter what the initial condition is and how the external environment changes. The proposed electro-optic THz modulation method, taking advantage of strongly correlated electron material, opens up avenues for the realization of THz smart devices.

Optical Fiber-Integrated Metasurfaces: An Emerging Platform for Multiple Optical Applications

The advent of metasurface technology has revolutionized the field of optics and photonics in recent years due to its capability of engineering optical wavefronts with well-patterned nanostructures at subwavelength scale. Meanwhile, inspired and benefited from the tremendous success of the “lab-on-fiber” concept, the integration of metasurface with optical fibers has drawn particular interest in the last decade, which establishes a novel technological platform towards the development of “all-in-fiber” metasurface-based devices. Thereby, this review aims to present and summarize the optical fiber-integrated metasurfaces with the current state of the art. The application scenarios of the optical fiber metasurface-based devices are well classified and discussed accordingly, with a brief explanation of physical fundamentals and design methods. The key fabrication methods corresponding to various optical fiber metasurfaces are summarized and compared. Furthermore, the challenges and potential future research directions of optical fiber metasurfaces are addressed to further leverage the flexibility and versatility of meta-fiber-based devices. It is believed that the optical fiber metasurfaces, as a novel all-around technological platform, will be exploited for a large range of applications in telecommunication, sensing, imaging, and biomedicine.

Graphene metalens with dynamic focusing and plane focusing in the terahertz range

We theoretically propose a high-efficiency tunable metalens based on an ellipse-shaped perforated graphene metasurface. By optimizing the axial length ratio of the elliptical aperture, we find the elliptical aperture with high reflectivity over a broad band by means of observing the reflectivity at different frequencies. Then, varying the orientation of the elliptical aperture from 0° to 180°, the reflected wave can generate a continuous 2π range phase shift while keeping its amplitude high, which is necessary to achieve focusing. The metalens exhibits extraordinary tunability of focal length via uniformly changing the Fermi energy of graphene. The focus can be shifted above 72 µm with focusing efficiency reaching over 70%. In addition, the tunable metalens is also capable of broadband focusing modulation and plane focusing. The presented metalens exhibits outstanding focusing efficiency in dynamic focusing, thereby manifesting great practicability in dynamic imaging and robust stable imaging.

Single-layer phase gradient mmWave metasurface for incident angle independent focusing

Metasurfaces allow the rapid development of compact and flat electromagnetic devices owing to their capability in manipulating the wavefront of electromagnetic waves. Particularly, with respect to the metasurface lenses, wide operational bandwidth and wide incident angle behavior are critically required for practical applications. Herein, a single-layer phase gradient metasurface lens is presented to achieve millimeter-wave focusing at a focal point of 13 mm regardless of the incident angle. The proposed metasurface lens is fabricated by constructing subwavelength-thick (< λ/10) phase elements composed of two metallic layers separated by a single dielectric substrate that exhibits low-Q resonance properties and a wide phase modulation range with satisfactory transmissivity. By controlling the spatial phase distribution, the proposed metasurface lens successfully realises effective wavefront manipulation properties and high-performance electromagnetic-wave-focusing characteristics over a wide operating frequency range from 35 to 40 GHz with incident angle independency up to 30°.

Metalens mounted on a resonant tunneling diode for collimated and directed terahertz waves

Refraction in materials is a fundamental phenomenon in optics and is a factor in the manipulation of light, such as wavefront shaping and beam control. However, conventional optical lenses incorporated in numerous optical sources are made of naturally occurring materials, and material properties predetermine the lens performance. For the development of terahertz flat optics, we experimentally demonstrate a gradient-refractive-index (GRIN) collimating metalens made of our original reflectionless metasurface with an extremely high refractive index, above 10 at 0.312 THz. The planar collimating metalens converts wide-angle radiation from a resonant tunneling diode (RTD) to a collimated plane wave and enhances the directivity of a single RTD 4.2 times. We also demonstrate directional angle control of terahertz waves by moving the metalens in parallel with the incoming wave. The metalens can be simply integrated with a variety of terahertz continuous-wave (CW) sources for 6G (beyond 5G) wireless communications and imaging in future advanced applications. Flat optics based on high refractive index metasurfaces rather than naturally occurring materials can offer an accessible platform for optical devices with unprecedented functionalities.

Dynamic switching of coaxial focus based on terahertz meta-lens

We propose an active meta-lens that can dynamically switch the coaxial focus on three statuses with the external optical pump. The meta-lens composes of two concentric sets of complementary split-ring resonator (CSRR) arrays, which function at different focal lengths, atop the silicon on sapphire substrate. With specifically structured phase distribution, the meta-lens can form completely separated double foci simultaneously. Through illuminating the internal or external CSRR arrays individually with patterned optical pump, the meta-lens switches to single focus at different points. The proposed design provides a new avenue for developing terahertz multifunctional devices applied in microscope imaging and tomography.

High-volume rapid prototyping technique for terahertz metallic metasurfaces

Terahertz technology has greatly benefited from the recent development and generalization of prototyping technologies such as 3D printing and laser machining. These techniques can be used to rapidly fabricate optical devices for applications in sensing, imaging and communications. In this paper, we introduce hot stamping, a simple inexpensive and rapid technique to form 2D metallic patterns that are suitable for many terahertz devices. We fabricate several example devices to illustrate the versatility of the technique, including metasurfaces made of arrays of split-ring resonators with resonances up to 550 GHz. We also fabricate a wire-grid polarizer for use as a polarizing beam splitter. The simplicity and low cost of this technique can help in rapid prototyping and realization of future terahertz devices.

Broadband bifunctional Luneburg-Fisheye lens based on anisotropic metasurface

Luneburg lenses and Maxwell fisheye lenses possess distinct properties of focusing, well beyond conventional lenses made of uniform materials. In this paper, a planar broadband bifunctional Luneburg-fisheye lens synthesized by gradient anisotropic metasurface is proposed. The proposed anisotropic metasurface is formed by non-resonant anisotropic cells, so that it can independently realize the equivalent gradient refractive indexes of Luneburg lens and Maxwell fisheye lens along orthogonal directions in a broad band, respectively. To verify the performance of the bifunctional lens, a prototype associated with a feeding log-periodic dipole antenna has been fabricated. Experimental results show that the proposed lens functions well over a wide frequency range with high efficiency and low profile, which coincides well with theoretical predictions and simulated results. It is expected that the proposed design will facilitate the applications of multifunctional metadevices in microwave and optical ranges.

Enhanced terahertz focusing for a graphene-enabled active metalens

Graphene-based terahertz (THz) metasurfaces have the advantages of ultra-small thickness, electrical tunability, and fast tuning speed. However, many such structures suffer low efficiency, especially for transmissive devices. Here we propose a hybrid structure for focusing THz waves with tunability and enhanced focusing efficiency, which is composed of a graphene-loaded metallic metasurface sandwiched by two mutually orthogonal gratings. Experimental results show that due to the multi-reflection between the metasurface layer and the grating layer, the focusing efficiency is enhanced by 1.8 times, and the focal length of the metalens is increased by 0.61 mm when the applied gate voltage on the graphene is increased from 0 V to 1.4 V. We hope the proposed structure may open a new avenue for reconfigurable THz metasurfaces with high efficiencies.

Ultrafast modulation of the spectral filtering properties of a THz metasurface

We demonstrate ultrafast tuning of a plasmonic spectral filter at terahertz (THz) frequencies. The device is made of periodically spaced gold crosses deposited on the surface of an undoped silicon wafer in which transient free carriers can be optically injected with a femtosecond resonant pulse. We demonstrate the concept by measuring the transmission spectrum of a notch filter using time-domain THz spectroscopy. Proper synchronization of the THz probe and visible excitation pulses leads to an enhanced transmission at the resonance by more than two orders of magnitude. Finite-difference time-domain simulations, which are in agreement with the experimental results, show that the underlying mechanisms responsible for the resonance blueshift and linewidth broadening can be attributed to the photoinduced change in dielectric properties of the substrate. This is supported by the numerically simulated field distribution and reflection/transmission coefficients. The device can be used in future pulse shaping and ultrafast switching experiments.

Enhancing Spectral Reflection through Controlled Phase Distribution Using Doped Polar-Dielectric Metasurfaces

Controlling the phase distribution of wavefronts using optical metasurfaces has led to interesting optical properties and applications. Here, we explore the control of phase distribution through polar-dielectric metasurfaces composed of doped SiC nanosphere arrays. We investigate the impact of doping concentration on the optical properties of SiC nano-spheres. Our results indicate that increasing the doping of SiC nanoparticles influenced electric dipolar resonances, whereas it did not change the dipolar resonances. Using this concept, we numerically studied the extension of this idea to form metasurface arrays of single, dimer and linear trimers of the doped SiC nano-spheres. Using different doping schemes, we studied the improvement of the reflectivity at frequencies greater than the longitudinal optical phonon frequency.

Gate-controlled terahertz focusing based on graphene-loaded metasurface

Metasurfaces have proven their great application potentials in terahertz (THz) wave modulations. However, realizing an active metasurface retaining lensing functionality in the THz frequency regime is still highly desired. Here a metalens, featuring electrically tunable focal length, based on propagation phase delay, is proposed and demonstrated experimentally. To have full control over the designed lens functionality, a gold thin film etched with a C-shaped aperture antenna array covered by monolayer graphene is used. By applying a bias voltage to the graphene, the phase control of the antenna array is changed, and thus the focus of the linearly polarized THz beam can be flexibly tuned from 7.13mm to 8.25mm. The proposed approach has a promising perspective for a variety of applications in communication, reconfigurable flat optics and real-time imaging in THz regime.

Metasurface lens with angular modulation for extended depth of focus imaging

The depth of focus (DOF) indicates the tolerance of the imaging displacement. The axial long-focal-depth is significant in practical applications, including optical imaging and communication. The importance of extending the DOF is rapidly growing with the advance of metasurface lenses. Angular modulation, as a promising way to extend the DOF, offers an additional degree of freedom to improve the imaging quality. Here we theoretically and experimentally demonstrate an angular modulated metasurface lens for extended DOF imaging by means of applying the geometrical phase. Unlike previous studies of the geometrical phase, which is sensitive to the polarity of circular polarization incidence, the polarity of circular polarization independence and broadband characteristic of angular modulation yield the potential of robust and efficient extension of the DOF imaging, thus providing novel opportunities for highly integrated optical circuits.

An Ultra-Wide Band Polarization-Independent Random Coding Metasurface for RCS Reduction

In this paper, a novel ultra-wide band (UWB) random 3-bit coding metasurface with polarization independence has been designed to realize radar cross-section (RCS) reduction. The proposed structure consists of polarization conversion metasurfaces (PCMs), which possess the capability of rotating linear polarization waves to their orthogonal ones in an UWB. The polarization-independent property can be attributed to the random rotation angle of each constituting unit. Due to the randomness of 3-bit coding and rotation angle of each element, the divergence of the reflected beam is greatly improved. In addition, the effect of RCS reduction with respect to the unit period length and the unit position are also discussed. Finally, a prototype is fabricated and measured to validate the simulation. The experimental results demonstrate that an ultra-wide band RCS reduction over 10 dB, ranging from 18.3–42.2 GHz, can be attained by the proposed coding metasurface and the maximum reduction is 28.7 dB.

Recent Advances in MEMS Metasurfaces and Their Applications on Tunable Lens

The electromagnetic (EM) properties of metasurfaces depend on both structural design and material properties. microelectromechanical systems (MEMS) technology offers an approach for tuning metasurface EM properties by structural reconfiguration. In the past 10 years, vast applications have been demonstrated based on MEMS metasurfaces, which proved to have merits including, large tunability, fast speed, small size, light weight, capability of dense integration, and compatibility of cost-effective fabrication process. Here, recent advances in MEMS metasurface applications are reviewed and categorized based on the tuning mechanisms, operation band and tuning speed. As an example, the pros and cons of MEMS metasurfaces for tunable lens applications are discussed and compared with traditional tunable lens technologies followed by the summary and outlook.

3D plasmonic design approach for efficient transmissive Huygens metasurfaces

In this paper we present a design concept for 3D plasmonic scatterers as high- efficiency transmissive metasurface (MS) building blocks. A genetic algorithm (GA) routine partitions the faces of the walls inside an open cavity into a M x N grid of voxels which can be either covered with metal or left bare, and optimizes the distribution of metal coverage needed to generate electric and magnetic modes of equal strength with a targeted phase delay (Φt) at the design wavelength. Even though the electric and magnetic modes can be more complicated than typical low order modes, with their spectral overlap and equal strengths, they act as a Huygens source, with the accompanying low reflection magnitude. Square/hexagonal voxels inside square/rectangular cavities are thoroughly analyzed for operation at 8 µm, although the technique can be applied to different cavity geometries for operation across the electromagnetic spectrum. Results from full-wave simulations show the GA routine can repeatedly pinpoint scatterer geometries emitting at any Φt value across 2π phase space with transmittances of at least 60%, making these MS building blocks an attractive plasmonic alternative for practical optical applications. Full-scale metasurface devices are calculated from near-fields of the individual elements to validate the optical functionality.

Vanadium dioxide based broadband THz metamaterial absorbers with high tunability: simulation study

With their unprecedented flexibility in manipulating electromagnetic waves, metamaterials provide a pathway to structural materials that can fill the so-called "THz gap". It has been reported that vanadium dioxide (VO₂) experiences a three orders of magnitude increase in THz electrical conductivity when it undergoes an insulator-to-metal transition. Here, we propose a VO₂ based THz metamaterial absorber exhibiting broadband absorptivity that arises from the multiple resonances supported by a delicately balanced doubly periodic array of VO₂ structures and numerically demonstrate that the corresponding absorption behavior is highly dependent on the VO₂'s THz electrical properties. Considering the phase transition induced dramatic change in VO₂'s material property, the proposed metamaterial absorbers have the potential for strong modulation and switching of broadband THz radiation.

Deep Learning: A Rapid and Efficient Route to Automatic Metasurface Design

Metasurfaces provide unprecedented routes to manipulations on electromagnetic waves, which can realize many exotic functionalities. Despite the rapid development of metasurfaces in recent years, the design process of metasurface is still time-consuming and computational resource-consuming. Moreover, it is quite complicated for layman users to design metasurfaces as plenty of specialized knowledge is required. In this work, a metasurface design method named REACTIVE is proposed on the basis of deep learning, as deep learning method has shown its natural advantages and superiorities in mining undefined rules automatically in many fields. REACTIVE is capable of calculating metasurface structure directly through a given design target; meanwhile, it also shows the advantage in making the design process automatic, more efficient, less time-consuming, and less computational resource-consuming. Besides, it asks for less professional knowledge, so that engineers are required only to pay attention to the design target. Herein, a triple-band absorber is designed using the REACTIVE method, where a deep learning model computes the metasurface structure automatically through inputting the desired absorption rate. The whole design process is achieved 200 times faster than the conventional one, which convincingly demonstrates the superiority of this design method. REACTIVE is an effective design tool for designers, especially for laymen users and engineers.

Terahertz beam focusing through designed oblique metal-slit array

Manipulation of propagating beams is essential in applications, and the potentially arising phenomena offer attractive optical components. However, the design of optical components using only naturally occurring materials has approached physical limits, and artificial materials such as metamaterials and metasurfaces are a way forward to open the door to sophisticated optical components. This paper shows manipulation of terahertz beams through designed oblique metal-slit arrays where a common metal-slit array does not perform as a lens. The oblique metal-slit array has a refractive index determined as a function of a steep angle. The lens consists of multiple metal plates with a designed oblique angle, and a convex output structure produces a focusing effect. We also suggest that the Brewster phenomenon in the lens can simply enhance the electric field intensity at the focal point. The Brewster condition of the lens is correlated with a jagged edged face on the input side with an appropriate metal-slit spacing and thickness. The phenomenon would be applicable to numerous promising components and applications such as gain-enhancement optical components and perfect impedance-matching polarizers.

Anomalous refraction and reflection characteristics of bend V-shaped antenna metasurfaces

Stabilization issue of anomalous refraction and reflection in V-shaped antenna metasurfaces are investigated. Specifically, when a V-shaped metasurface is artificially tilted, the induced refraction and reflection are theoretically analyzed. Detailed numerical and experimental study is then performed for the upward and downward bending metasurfaces. Our results show that although the anomalous reflection is sensitive to the deformation of metasurface geometry; the anomalous refraction is, surprisingly, barely affected by relatively small-angle tilting and able to support perfect beam orienting. Since in real-world applications, the optical objects are often affected by multiple uncertain factors, such as deformation, vibration, non-standard surface, non-perfect planar, etc., the stabilization of optical functionality has therefore been a long-standing design challenge for optical engineering. We believe our findings can shed new light on this stability issue.

Independent Manipulating of Orthogonal-Polarization Terahertz Waves Using A Reconfigurable Graphene-Based Metasurface

Viewing the trend of miniaturization and integration in modern electronic device design, a reconfigurable multi-functional graphene-based metasurface is proposed in this paper. By virtue of the reconfigurability of reflection patterns, this metasurface is able to independently manipulate orthogonal linearly polarized terahertz wave. The building blocks of the proposed metasurface are series of graphene-strips-based unit-cells. Each unit-cell consists of two orthogonal graphene strips and a grounded substrate, which has anisotropic responses for each of orthogonal polarizations (x-polarized and y-polarized waves). The reflection phases of both x- and y-polarized waves can be controlled independently through separate electrical tuning. Based on the proposed metasurface, functionalities including beam splitting, beam deflecting, and linear-to-circular polarization converting using a shared aperture are numerically demonstrated and analyzed. Simulation results demonstrate excellent performance, which is consistent with the theorized expectations. This work paves the way for enhancing the miniaturization of modern electronic/optical devices and potentially has important applications in the next-generation information systems for communication, sensing, and imaging.

Active optical modulator based on a metasurface in the terahertz region

The characteristics of the electromagnetically induced transparency (EIT) analog exposed under different illumination powers have been investigated theoretically and experimentally. The EIT analog is composed of a fixed aluminum structure fabricated on the silicon substrate. It was found that the resonance degree of the transparent window displayed a decreasing trend, and a blueshift phenomenon emerged by increasing the powers of the laser. Similarly, the properties of the time delay under different illumination powers have also been researched. The realization of the tuning effect may provide a possible choice for the modulation of the slow light devices.

All-dielectric metalens for terahertz wave imaging

Terahertz wave imaging offers promising properties for non-destructive testing applications in the areas of homeland security, medicine, and industrial inspection. However, conventional optical lenses are heavy and bulky and difficult to integrate. An all-dielectric metasurface provides an attractive way to realize a planar lens of light weight that is ultrathin and offers ease of integration. Terahertz lenses based on various metasurfaces have been studied, especially for the application of wave focusing, while there are few experimental demonstrations of terahertz wave imaging lenses based on an all-dielectric metasurface. In the present work, we propose a metalens based on an all-dielectric metasurface with a sub-wavelength unit size of 0.39λ for terahertz wave imaging and experimentally demonstrate its performance in focusing and imaging. A large numerical aperture metalens was fabricated with a focal length of 300λ, radius of 300λ, and numerical aperture of 0.707. The experimental results show that the lens can focus THz waves with an incident angle up to 48°. More importantly, clear terahertz wave images of different objects were obtained for both different cases of forward- and inverse-incident directions, which demonstrate the reversibility of the metalens for imaging. Such a metalens provides a way for realization of all-planar-lens THz imaging system, and might find application in terahertz wave imaging, information processing, microscopy, and others.

Broadband Polarization Conversion Metasurface Based on Metal Cut-Wire Structure for Radar Cross Section Reduction

A class of linear polarization conversion coding metasurfaces (MSs) based on a metal cut-wire structure is proposed, which can be applied to the reduction properties of radar cross section (RCS). We firstly present a hypothesis based on the principle of planar array theory, and then verify the RCS reduction characteristics using linear polarization conversion coding MSs by simulations and experiments. The simulated results show that in the frequency range of 6⁻14 GHz, the linear polarization conversion ratio reaches a maximum value of 90%, which is in good agreement with the theoretical predictions. For normal incident x- and y-polarized waves, RCS reduction of designed coding MSs 01/01 and 01/10 is essentially more than 10 dB in the above-mentioned frequency range. We prepare and measure the 01/10 coding MS sample, and find that the experimental results in terms of reflectance and RCS reduction are in good agreement with the simulated ones under normal incidence. In addition, under oblique incidence, RCS reduction is suppressed as the angle of incidence increases, but still exhibits RCS reduction effects in a certain frequency range. The designed MS is expected to have valuable potential in applications for stealth field technology.

Focal shift in metasurface based lenses

In this paper, the focal shift issues of squared metasurface lenses are investigated. Axial intensity distribution formula of the squared planar lens model is obtained by utilizing traditional diffraction theories combining with the Fresnel approximation method. Fresnel integral and Cornu spiral are adopted to obtain the relations between the relative focal shift and Fresnel number, which can be used to predict the shift for different Fresnel numbers. In the far infrared region (at 10.6μm), a group of C-shaped nanoantennas are designed to cover the phase shift from 0 to 2π and simulations also performed by using finite-difference time-domain (FDTD) method. Several lenses are arranged by those resonators, and simulation results of focusing performance are in good agreement with the theoretical prediction. It's expected that this work will provide a better solution for the design of lens in the infrared integrated optical systems.

Transmissive terahertz metalens with full phase control based on a dielectric metasurface

In this paper, we report a transmissive terahertz (THz) metalens based on a dielectric metasurface that consists of periodically arranged sub-wavelength silicon cross resonators with a spatially hyperboloidal phase profile. By varying arm lengths of the cross resonators, we obtained a full 2π phase coverage with high transmission at target frequency. The fabricated metalens was experimentally demonstrated to focus a continuous THz beam to a spot with a full width at half-maximum of 630 μm at a focal length of 28 mm, which agrees well with the theoretical calculation. This device has potential for applications in THz imaging and communications, and our work can also easily be extended in the design of other planar THz components, such as beam deflectors or vortex plates.

Flat Terahertz Reflective Focusing Metasurface with Scanning Ability

The ability to manipulate the propagation properties of electromagnetic waves, e.g., divergence, focusing, holography or deflection, is very significant in terahertz applications. Metasurfaces with flat structures are attractive for achieving such manipulations in terahertz band, as they feature low profile, lightweight, and ease of design and installation. Several types of terahertz reflective or transmitting metasurfaces with focusing function have been implemented recently, but none of them can provide scanning ability with controllable focus. Here, a flat reflective metasurface featuring controllable focal shift is proposed and experimentally demonstrated. Furthermore, the principle of designing a focus scanning reflective metasurface is presented and the focusing characteristics are discussed, including focus scanning along a line parallel or orthogonal to the metasurface with a large bandwidth. These interesting properties indicate that this flat reflective metasurface could play a key role in many terahertz imaging and detection systems.

Wide-angle broadband terahertz metamaterial absorber with a multilayered heterostructure

In this paper, a wide-angle broadband perfect absorber is composed of a periodical metamaterial heterostructure. The structure is designed according to the concept that the metamaterial absorber's resonant frequency range can be manipulated by adjusting the filling factor of a bi-insulator heterostructure. The calculated results reveal that the four-layer herostructure has four perfect absorption peaks at the range of the terahertz frequency band. The related absorption bandwidth is 300 GHz and the average absorptivity is 98.6%. At the same time, the structure is insensitive to the incident angle.

Visible light focusing flat lenses based on hybrid dielectric-metal metasurface reflector-arrays

Conventional metasurface reflector-arrays based on metallic resonant nanoantenna to control the wavefront of light for focusing always suffer from strong ohmic loss at optical frequencies. Here, we overcome this challenge by constructing a non-resonant, hybrid dielectric-metal configuration consisting of TiO₂ nanofins associated with an Ag reflector substrate that provides a broadband response and high polarization conversion efficiency in the visible range. A reflective flat lens based on this configuration shows an excellent focusing performance with the spot size close to the diffraction limit. Furthermore, by employing the superimposed phase distribution design to manipulate the wavefront of the reflected light, various functionalities, such as multifocal and achromatic focusing, are demonstrated for the flat lenses. Such a reflective flat lens will find various applications in visible light imaging and sensing systems.

Dual-Wavelength Terahertz Metasurfaces with Independent Phase and Amplitude Control at Each Wavelength

We have designed, fabricated and characterized dual-wavelength metasurfaces that function at two assigned terahertz wavelengths with independent phase and amplitude control at each wavelength. Specifically, we have designed a dual-wavelength achromatic metasurface-based deflector deflecting the incident wave to the same direction at two selected wavelengths, which has circumvented the critical limitation of strong wavelength dependence in the planar metasurface-based devices caused by the resonant nature of the plasmonic structures. As a proof of concept demonstration, the designed dual-wavelength achromatic deflector has been fabricated, and characterized experimentally. The numerical simulations, theoretical predictions, and experimental results agree very well with each other, demonstrating the property of independently manipulating the phase profiles at two wavelengths. Furthermore, another unique feature of the designed metasurface is that it can independently tailor both the phase and amplitude profiles at two wavelengths. This property has been numerically validated by engineering a metasurface-based device to simultaneously generate two diffraction orders at two desired wavelengths.

Ultrathin flexible terahertz polarization converter based on metasurfaces

We present a method to design and fabricate a kind of converters based on flexible metasurfaces which can change the polarization state of an incident terahertz beam. The metasurface consists of a two-dimensional array of rectangular metallic antennas that can abruptly change the phase of the incoming terahertz beam. Experimentally demonstrated half-wave plates generate 0.1 THz beam with a π/2 polarization rotation. By slightly changing the structure of the converter, an elliptically or circularly polarized beam is expected to be obtained. These flexible terahertz converters may have many potential applications in terahertz technology.

Multifunctional metasurface lens for imaging and Fourier transform

A metasurface can manipulate light in a desirable manner by imparting local and space-variant abrupt phase change. Benefiting from such an unprecedented capability, the conventional concept of what constitutes an optical lens continues to evolve. Ultrathin optical metasurface lenses have been demonstrated based on various nanoantennas such as V-shape structures, nanorods and nanoslits. A single device that can integrate two different types of lenses and polarities is desirable for system integration and device miniaturization. We experimentally demonstrate such an ultrathin metasurface lens that can function either as a spherical lens or a cylindrical lens, depending on the helicity of the incident light. Helicity-controllable focal line and focal point in the real focal plane, as well as imaging and 1D/2D Fourier transforms, are observed on the same lens. Our work provides a unique tool for polarization imaging, image processing and particle trapping.

Terahertz Artificial Dielectric Lens

We have designed, fabricated, and experimentally characterized a lens for the THz regime based on artificial dielectrics. These are man-made media that mimic properties of naturally occurring dielectric media, or even manifest properties that cannot generally occur in nature. For example, the well-known dielectric property, the refractive index, which usually has a value greater than unity, can have a value less than unity in an artificial dielectric. For our lens, the artificial-dielectric medium is made up of a parallel stack of 100 μm thick metal plates that form an array of parallel-plate waveguides. The convergent lens has a plano-concave geometry, in contrast to conventional dielectric lenses. Our results demonstrate that this lens is capable of focusing a 2 cm diameter beam to a spot size of 4 mm, at the design frequency of 0.17 THz. The results further demonstrate that the overall power transmission of the lens can be better than certain conventional dielectric lenses commonly used in the THz regime. Intriguingly, we also observe that under certain conditions, the lens boundary demarcated by the discontinuous plate edges actually resembles a smooth continuous surface. These results highlight the importance of this artificial-dielectric technology for the development of future THz-wave devices.

Full controlling of Fano resonances in metal-slit superlattice

Controlling of the lineshape of Fano resonance attracts much attention recently due to its wide capabilities for lasing, biosensing, slow-light applications and so on. However, the controllable Fano resonance always requires stringent alignment of complex symmetry-breaking structures and thus the manipulation could only be performed with limited degrees of freedom and narrow tuning range. Furthermore, there is no report so far on independent controlling of both the bright and dark modes in a single structure. Here, we semi-analytically show that the spectral position and linewidth of both the bright and dark modes can be tuned independently and/or simultaneously in a simple and symmetric metal-slit superlattice, and thus allowing for a free and continuous controlling of the lineshape of both the single and multiple Fano resonances. The independent controlling scheme is applicable for an extremely large electromagnetic spectrum range from optical to microwave frequencies, which is demonstrated by the numerical simulations with real metal and a microwave experiment. Our findings may provide convenient and flexible strategies for future tunable electromagnetic devices.

Polarization-independent longitudinal multi-focusing metalens

A novel multi-focusing metalens in the longitudinal direction has been proposed and investigated based on the equal optical path principle, which is independent on the incident polarizations and can be suitable for both of the linear and circular polarization incidences simultaneously. Here, three novel designing principles: partitioned mode, radial alternating mode and angular alternating mode, have been proposed firstly for constructing different types of the longitudinal multi-focusing metalenses. The performances of the designed metalenses based on the different designed methods have also been analyzed and investigated in detail, and the intensity ratio of the focusing spots can be tuned easily by modulating the numbers of the relative type of nanoantennas, which is significant for the micro-manipulating optics and the multi-imaging technology in the integrated optics.