Compact spatial multiplexers for mode division multiplexing

Interlayer Slope Waveguide Coupler for Multilayer Chalcogenide Photonics

The interlayer coupler is one of the critical building blocks for optical interconnect based on multilayer photonic integration to realize light coupling between stacked optical waveguides. However, commonly used coupling strategies, such as evanescent field coupling, usually require a close distance, which could cause undesired interlayer crosstalk. This work presents a novel interlayer slope waveguide coupler based on a multilayer chalcogenide glass photonic platform, enabling light to be directly guided from one layer to another with a large interlayer gap (1 µm), a small footprint (6 × 1 × 0.8 µm3), low propagation loss (0.2 dB at 1520 nm), low device processing temperature, and a high bandwidth, similar to that in a straight waveguide. The proposed interlayer slope waveguide coupler could further promote the development of advanced multilayer integration in 3D optical communications systems.

Coherent few mode demultiplexer realized as a 2D grating coupler array in silicon

We demonstrate an on-chip coherent mode scrambling demultiplexer for polarization multiplexed few mode signals. The device has been fabricated in the standard silicon-on-insulator platform. The mode demultiplexer consists of an array of 2D grating couplers for dual polarization few mode fiber-to-chip coupling and optical hybrids realized by 4×4 MMIs. The array of perfect vertical 2D grating couplers allows us an efficient fiber-to-chip coupling with experimental peak coupling efficiencies of -5.2 dB and -9.0 dB at 1570 nm for LP₀₁ and LP₁₁ modes, respectively, while simulated coupling efficiencies at 1550 nm are -3.6 dB and -3.3 dB for LP₀₁ and LP₁₁, respectively. We successfully performed a back-to-back three LP modes division multiplexing transmission experiment with single polarization 32 Gbaud QPSK signals using the fabricated mode demultiplexer relying on offline MIMO DSP techniques.

Silicon Integrated Nanophotonic Devices for On-Chip Multi-Mode Interconnects

Mode-division multiplexing (MDM) technology has drawn tremendous attention for its ability to expand the link capacity within a single-wavelength carrier, paving the way for large-scale on-chip data communications. In the MDM system, the signals are carried by a series of higher-order modes in a multi-mode bus waveguide. Hence, it is essential to develop on-chip mode-handling devices. Silicon-on-insulator (SOI) has been considered as a promising platform to realize MDM since it provides an ultra-high-index contrast and mature fabrication processes. In this paper, we review the recent progresses on silicon integrated nanophotonic devices for MDM applications. We firstly discuss the working principles and device configurations of mode (de)multiplexers. In the second section, we summarize the multi-mode routing devices, including multi-mode bends, multi-mode crossings and multi-mode splitters. The inverse-designed multi-mode devices are then discussed in the third section. We also provide a discussion about the emerging reconfigurable MDM devices in the fourth section. Finally, we offer our outlook of the development prospects for on-chip multi-mode photonics.

Broadband and low-loss mode scramblers using CO2-laser inscribed long-period gratings

We demonstrate broadband and low-loss three-mode and six-mode scramblers employing CO₂-laser inscribed long-period gratings (LPGs) for space-division multiplexing. Step-index (SI) few-mode fibers are used to avoid mode coupling to the cladding modes. We characterize the mode scramblers using a swept-wavelength interferometer. Mode-dependent loss (MDL) and modal transfer matrices over the C+L band are presented. Demonstrated LPGs with negligible MDL and low insertion loss contributed to high-performance CO₂-laser inscription. The total MDLs induced by the SI fiber with LPGs in three-mode and six-mode scramblers are measured to be 2 and 4 dB, respectively.

Bidirectional mode-division multiplexers with antireflection gratings

A bidirectional mode-division multiplexer (BMDM) with antireflection gratings is designed, and its performance in terms of S-parameters is presented. A BMDM can (de)multiplex three modes with only two waveguides and a Bragg grating. The impact of return losses on the performance of BMDMs is studied and antireflection gratings are designed to reduce their effects. A theoretical analysis of the proposed (de)multiplexer is developed based on the perturbative coupled-mode theory. Analytical expressions for the coupled-mode equations of the proposed device are obtained, taking into account the effects of return losses. Both duty cycle and teeth depths of the antireflection gratings are determined based on optimizing a cost function. In addition, FDTD simulation of the proposed device is performed, and its S-parameters are obtained and studied.

Large-bandwidth, low-loss, efficient mode mixing using long-period mechanical gratings

We propose a new architecture for using long-period fiber gratings (LPGs) to induce strong mode mixing with low loss for space-division multiplexing. In this architecture, LPGs are installed in step-index (SI) few-mode fibers that support more modes than the transmission fiber. Such a design could significantly reduce losses due to coupling from the highest-order mode group to cladding modes. In our experiment, efficient mixing of three spatial modes over a broad bandwidth was achieved by a mechanical long-period grating on a SI fiber that supports eight spatial modes. The insertion loss, including two splice losses, is less than 0.5 dB, and the coupling matrix and mode-dependent loss (MDL) are characterized experimentally for the first time, to the best of our knowledge. Strong mixing between LP₀₁ and LP₁₁ for a whole C band is demonstrated, and MDL introduced to the system is negligible.

All-fiber few-mode multicore photonic lantern mode multiplexer

The emergence of space division multiplexing (SDM) for ultrahigh capacity networks has heralded pioneering Petabit-class optical transmission systems. In parallel to novel SDM fibers, a new class of components to enable scalable, low-loss schemes for unlocking fiber capacity is being developed. In this work, an all-fiber mode selective photonic lantern mode multiplexer designed for launching into few-mode multicore fibers is demonstrated. This device is capable of selectively exciting LP₀₁, LP_11a and LP_11b modes in a seven-core configuration, resulting in 21 spatial channels, with less than 38 dB core-to-core crosstalk and insertion loss below 0.4 dB. The multicore photonic lantern multiplexer is scalable to larger number of cores and modes per core, and can be easily integrated with emerging ultra-high bandwidth few-mode multicore optical communication systems.

Integrated all-optical MIMO demultiplexer for mode- and wavelength-division-multiplexed transmission

A photonic integrated circuit performing simultaneous mode and wavelength demultiplexing for few-mode-fiber transmission is demonstrated for the first time. The circuit is realized on an InP-based technological platform; it can handle up to eight mode- and wavelength-division-multiplexed (MDM/WDM) channels and allows all-optical multiple-input-multiple-output processing to unscramble mode mixing generated by fiber propagation. A single arrayed waveguide grating is used to demultiplex the WDM channels carried by all the propagating modes, optimizing circuit complexity, chip area, and operational stability. Combined with an integrated wideband mode multiplexer the circuit is successfully exploited for the transmission of 10  Gbit/s on-off-keying non-return-to-zero channels with a residual cross talk of about -15  dB.

Spatial mode-selective waveguide with hyperbolic cladding

Hyperbolic metamaterials (HMMs) are anisotropic materials with a permittivity tensor that has both positive and negative eigenvalues. Here we report that by using a type II HMM as a cladding material, a waveguide that only supports higher-order modes can be achieved, while the lower-order modes become leaky and are absorbed in the HMM cladding. This counter-intuitive property can lead to novel application in optical communications and photonic integrated circuits. The loss in our HMM insulator-HMM (HIH) waveguide is smaller than that of similar guided modes in a metal-insulator-metal (MIM) waveguide.

Advanced Spatial-Division Multiplexed Measurement Systems Propositions-From Telecommunication to Sensing Applications: A Review

The concepts of spatial-division multiplexing (SDM) technology were first proposed in the telecommunications industry as an indispensable solution to reduce the cost-per-bit of optical fiber transmission. Recently, such spatial channels and modes have been applied in optical sensing applications where the returned echo is analyzed for the collection of essential environmental information. The key advantages of implementing SDM techniques in optical measurement systems include the multi-parameter discriminative capability and accuracy improvement. In this paper, to help readers without a telecommunication background better understand how the SDM-based sensing systems can be incorporated, the crucial components of SDM techniques, such as laser beam shaping, mode generation and conversion, multimode or multicore elements using special fibers and multiplexers are introduced, along with the recent developments in SDM amplifiers, opto-electronic sources and detection units of sensing systems. The examples of SDM-based sensing systems not only include Brillouin optical time-domain reflectometry or Brillouin optical time-domain analysis (BOTDR/BOTDA) using few-mode fibers (FMF) and the multicore fiber (MCF) based integrated fiber Bragg grating (FBG) sensors, but also involve the widely used components with their whole information used in the full multimode constructions, such as the whispering gallery modes for fiber profiling and chemical species measurements, the screw/twisted modes for examining water quality, as well as the optical beam shaping to improve cantilever deflection measurements. Besides, the various applications of SDM sensors, the cost efficiency issue, as well as how these complex mode multiplexing techniques might improve the standard fiber-optic sensor approaches using single-mode fibers (SMF) and photonic crystal fibers (PCF) have also been summarized. Finally, we conclude with a prospective outlook for the opportunities and challenges of SDM technologies in optical sensing industry.

Heterogeneous 2D/3D photonic integrated microsystems

The continuing trend of exponential growth in data communications and processing are driving the need for large-scale heterogeneous integration. Similar to the trend we have observed in electronic integrated circuit development, we are witnessing a growing trend in 3D photonic integrated circuits (PICs) development in addition to that in 2D PICs. There are two main methods for fabricating 3D PICs. The first method, which utilizes ultrafast laser inscription (ULI), offers freeform shaping of waveguides in arbitrary contours and formations. The second method, which utilizes multilayer stacking and coupling of planar PICs, exploits relatively mature 2D PIC fabrication processes applied to each layer sequentially. Both the fabrication methods for 3D PICs have advantages and disadvantages such that certain applications may favor one method over the other. However, a joining of 2D PICs with 3D PICs can help develop integrated microsystems with new functionalities such as non-mechanical beam steering, space-division multiplexing (SDM), programmable arbitrary beam shaping, and photonic signal processing. We discuss examples of 3D PICs and 2D/3D integrated PICs in two applications: SDM via orbital-angular-momentum (OAM) multiplexing/demultiplexing and optical beam steering using optical phased arrays. Although a 2D PIC by itself can function as an OAM multiplexer or demultiplexer, it has limitations in supporting both polarizations. Alternatively, a 3D PIC fabricated by ULI can easily support both polarizations with low propagation loss. A combination of a 3D PIC and a 2D PIC designed and fabricated for OAM applications has successfully multiplexed and demultiplexed 15 OAM states to demonstrate polarization-diversified SDM coherent optical communications using multiple OAM states. Coherent excitation of multi-ring OAM states can allow highly scalable SDM utilizing Laguerre-Gaussian modes or linearly polarized (LP) modes. The preliminary fabrication of multi-ring OAM multiplexers and demultiplexers using the multilayer 3D PIC method and the ULI 3D PIC method has also been pursued. Large-scale (for example, 16×16 optical phased array) 3D PICs fabricated with the ULI technique have been demonstrated. Through these examples, we show that heterogeneous 2D/3D photonic integration retains the advantages of 2D PICs and 3D waveguides, which can potentially benefit many other applications.

Reconfigurable photonic integrated mode (de)multiplexer for SDM fiber transmission

Spatial division multiplexing in multi-mode fibers allows to largely enhance transmission capacity compared to single-mode links. Photonic integrated circuits can provide solutions for mode multiplexing at the transmitter and demultiplexing at the receiver but have to generally face high losses and inter-modal cross-talk issues. Here a photonic circuit for efficient mode multiplexing and demultiplexing in few-mode fibers is presented and demonstrated. Two 10 Gbit/s channels at the same wavelength and polarization are simultaneously transmitted over modes LP₀₁ and LP_11a of a few-mode fiber relying only on integrated mode MUX and DEMUX. The proposed Indium-Phosphide-based circuits have a good coupling efficiency with fiber modes and mode-dependant loss smaller than 1 dB. Measured mode excitation cross-talk is as low as -20 dB and a channel cross-talk after propagation and demultiplexing of -15 dB is achieved. An operational bandwidth of the full transmission system of at least 10 nm is demonstrated. Both mode MUX and DEMUX are fully reconfigurable and allow a dynamic switch of channel routing in the transmission system. These results enable fully-integrated fiber mode handling for high-bandwidth flexible optical networks.

Mode-dependent characterization of photonic lanterns

We propose and experimentally demonstrate a simple method for characterizing the power transfer matrix of photonic lanterns (PLs) used for mode division multiplexing (MDM) transmission. Due to the optical reflection arising at output facet of the few-mode fiber (FMF), we are able to detect the power at the individual single-mode fiber (SMF) input port and exploit a series of equations based on the theory of energy conservation to obtain mode-dependent characteristics of the PL, including the property of mode selectivity, insertion loss (IL), and channel-dependent loss (CDL). The proposed method is experimentally verified for both the mode selective and the nonmode selective photonic lanterns.

10 Spatial mode transmission using low differential mode delay 6-LP fiber using all-fiber photonic lanterns

To unlock the cost benefits of space division multiplexing transmission systems, higher spatial multiplicity is required. Here, we investigate a potential route to increasing the number of spatial mode channels within a single core few-mode fiber. Key for longer transmission distances and low computational complexity is the fabrication of fibers with low differential mode group delays. As such in this work, we combine wavelength and mode-division multiplexed transmission over a 4.45 km low-DMGD 6-LP-mode fiber by employing low-loss all-fiber 10-port photonic lanterns to couple light in and out of the fiber. Hence, a minimum DMGD of 0.2 ns (maximum 0.357 ns) is measured after 4.45 km. Instrumental to the multi-mode transmission system is the employed time-domain-SDM receiver, allowing 10 spatial mode channels (over both polarizations) to be captured using only 3 coherent receivers and real-time oscilloscopes in comparison with 10 for conventional methods. The spatial channels were unraveled using 20 × 20 multiple-input multiple-output digital signal processing. By employing a novel round-robin encoding technique, stable performance over a long measurement period demonstrates the feasibility of 10x increase in single-core multi-mode transmission.

Six mode selective fiber optic spatial multiplexer

Low-loss all-fiber photonic lantern (PL) mode multiplexers (MUXs) capable of selectively exciting the first six fiber modes of a multimode fiber (LP₀₁, LP_11a, LP_11b, LP_21a, LP_21b, and LP₀₂) are demonstrated. Fabrication of the spatial mode multiplexers was successfully achieved employing a combination of either six step or six graded index fibers of four different core sizes. Insertion losses of 0.2-0.3 dB and mode purities above 9 dB are achieved. Moreover, it is demonstrated that the use of graded index fibers in a PL eases the length requirements of the adiabatic tapered transition and could enable scaling to large numbers.