1
|
Maguire SM, McClimon JB, Zhang AC, Keller AW, Bilchak CR, Ohno K, Carpick RW, Composto RJ. Nanoscale Structure-Property Relations in Self-Regulated Polymer-Grafted Nanoparticle Composite Structures. ACS APPLIED MATERIALS & INTERFACES 2023; 15:10974-10985. [PMID: 36802474 DOI: 10.1021/acsami.2c15786] [Citation(s) in RCA: 0] [Impact Index Per Article: 0] [Reference Citation Analysis] [Abstract] [Key Words] [Track Full Text] [Subscribe] [Scholar Register] [Indexed: 06/18/2023]
Abstract
Using a model system of poly(methyl methacrylate)-grafted silica nanoparticles (PMMA-NP) and poly(styrene-ran-acrylonitrile) (SAN), we generate unique polymer nanocomposite (PNC) morphologies by balancing the degree of surface enrichment, phase separation, and wetting within the films. Depending on the annealing temperature and time, thin films undergo different stages of phase evolution, resulting in homogeneously dispersed systems at low temperatures, enriched PMMA-NP layers at the PNC interfaces at intermediate temperatures, and three-dimensional bicontinuous structures of PMMA-NP pillars sandwiched between two PMMA-NP wetting layers at high temperatures. Using a combination of atomic force microscopy (AFM), AFM nanoindentation, contact angle goniometry, and optical microscopy, we show that these self-regulated structures lead to nanocomposites with increased elastic modulus, hardness, and thermal stability compared to analogous PMMA/SAN blends. These studies demonstrate the ability to reliably control the size and spatial correlations of both the surface-enriched and phase-separated nanocomposite microstructures, which have attractive technological applications where properties such as wettability, toughness, and wear resistance are important. In addition, these morphologies lend themselves to substantially broader applications, including: (1) structural color applications, (2) tuning optical adsorption, and (3) barrier coatings.
Collapse
Affiliation(s)
- Shawn M Maguire
- Department of Materials Science and Engineering, University of Pennsylvania, Philadelphia, Pennsylvania 19104, United States
| | - J Brandon McClimon
- Department of Mechanical Engineering and Applied Mechanics, University of Pennsylvania, Philadelphia, Pennsylvania 19104, United States
| | - Aria C Zhang
- Department of Materials Science and Engineering, University of Pennsylvania, Philadelphia, Pennsylvania 19104, United States
| | - Austin W Keller
- Department of Materials Science and Engineering, University of Pennsylvania, Philadelphia, Pennsylvania 19104, United States
| | - Connor R Bilchak
- Department of Materials Science and Engineering, University of Pennsylvania, Philadelphia, Pennsylvania 19104, United States
| | - Kohji Ohno
- Department of Materials Science, Graduate School of Engineering, Osaka Metropolitan University, Sakai, Osaka 599-8531, Japan
| | - Robert W Carpick
- Department of Mechanical Engineering and Applied Mechanics, University of Pennsylvania, Philadelphia, Pennsylvania 19104, United States
| | - Russell J Composto
- Department of Materials Science and Engineering, University of Pennsylvania, Philadelphia, Pennsylvania 19104, United States
| |
Collapse
|
2
|
Xia K, Zheng X, Wang Y, Zhong W, Dong Z, Ye Z, Zhang Z. Biomimetic Chiral Photonic Materials with Tunable Metallic Colorations Prepared from Chiral Melanin-like Nanorods for UV Shielding, Humidity Sensing, and Cosmetics. LANGMUIR : THE ACS JOURNAL OF SURFACES AND COLLOIDS 2022; 38:8114-8124. [PMID: 35731984 DOI: 10.1021/acs.langmuir.2c01004] [Citation(s) in RCA: 0] [Impact Index Per Article: 0] [Reference Citation Analysis] [Abstract] [MESH Headings] [Track Full Text] [Subscribe] [Scholar Register] [Indexed: 06/15/2023]
Abstract
Many biological species combine the helical organization of cellulose or chitin microfibrils with broadband light absorption of black melanin to produce brilliant structural colors with metallic and glossy effects and other diverse functions. In this work, based on core-shell CNC@PDA chiral nanorods consisting of cellulose nanocrystals (CNCs) as the core and melanin-like polydopamine (PDA) as the shell that can form well-defined chiral liquid crystal phases, we report chiral photonic materials that closely mimic the unique coloration mechanisms and functionalities mastered by several biological species. The photonic films formed by such single CNC@PDA nanorods have brilliant iridescent structural colors originating from selective reflection of circularly polarized lights by the helical organization of CNC@PDAs across the films. Furthermore, the colors of such films have background-independent brightness, high visibility, and metallic effects that arise from the light absorption of the PDA component. Especially, the color ranges and metallic effects of the films can be conveniently tuned by varying the thickness of the PDA shell. In addition, the UV absorption and hygroscopic properties of PDA endow these CNC@PDA films with efficient broadband UV shielding and sensitive humidity-induced dynamic color changes. Due to the mussel-like superior adhesion of PDA, CNC@PDA-based photonic coatings can be formed conformably onto diverse kinds of substrates. A shiny eye shadow with viewing angle-dependent colorful patterns was used to demonstrate the potential applications. With combinations of multiple unique properties in one photonic material fabricated from a single building block, these CNC@PDA-based films are expected to have potential applications in cosmetics, UV protection, anticounterfeiting, chiral reflectors, etc.
Collapse
Affiliation(s)
- Ke Xia
- Key Laboratory of Functional Polymer Materials of Ministry of Education, Institute of Polymer Chemistry, College of Chemistry, Nankai University, 300071 Tianjin, China
| | - Xiaonan Zheng
- Key Laboratory of Functional Polymer Materials of Ministry of Education, Institute of Polymer Chemistry, College of Chemistry, Nankai University, 300071 Tianjin, China
| | - Yuhan Wang
- Key Laboratory of Functional Polymer Materials of Ministry of Education, Institute of Polymer Chemistry, College of Chemistry, Nankai University, 300071 Tianjin, China
| | - Weiting Zhong
- Key Laboratory of Functional Polymer Materials of Ministry of Education, Institute of Polymer Chemistry, College of Chemistry, Nankai University, 300071 Tianjin, China
| | - Ziyue Dong
- Key Laboratory of Functional Polymer Materials of Ministry of Education, Institute of Polymer Chemistry, College of Chemistry, Nankai University, 300071 Tianjin, China
| | - Zihan Ye
- Key Laboratory of Functional Polymer Materials of Ministry of Education, Institute of Polymer Chemistry, College of Chemistry, Nankai University, 300071 Tianjin, China
| | - Zhenkun Zhang
- Key Laboratory of Functional Polymer Materials of Ministry of Education, Institute of Polymer Chemistry, College of Chemistry, Nankai University, 300071 Tianjin, China
| |
Collapse
|
3
|
Datta B, Spero EF, Martin-Martinez FJ, Ortiz C. Socially-Directed Development of Materials for Structural Color. ADVANCED MATERIALS (DEERFIELD BEACH, FLA.) 2022; 34:e2100939. [PMID: 35373398 DOI: 10.1002/adma.202100939] [Citation(s) in RCA: 1] [Impact Index Per Article: 0.5] [Reference Citation Analysis] [Abstract] [Key Words] [MESH Headings] [Track Full Text] [Subscribe] [Scholar Register] [Received: 02/03/2021] [Revised: 10/14/2021] [Indexed: 06/14/2023]
Abstract
Advancing a socially-directed approach to materials research and development is an imperative to address contemporary challenges and mitigate future detrimental environmental and social impacts. This paper reviews, synergizes, and identifies cross-disciplinary opportunities at the intersection of materials science and engineering with humanistic social sciences fields. Such integrated knowledge and methodologies foster a contextual understanding of materials technologies embedded within, and impacting broader societal systems, thus informing decision making upstream and throughout the entire research and development process toward more socially responsible outcomes. Technological advances in the development of structural color, which arises due to the incoherent and coherent scattering of micro-and nanoscale features and possesses a vast design space, are considered in this context. Specific areas of discussion include material culture, narratives, and visual perception, material waste and use, environmental and social life cycle assessment, and stakeholder and community engagement. A case study of the technical and social implications of bio-based cellulose (as a source for structurally colored products) is provided. Socially-directed research and development of materials for structural color hold significant capacity for improved planetary and societal impact across industries such as aerospace, consumer products, displays and sensors, paints and dyes, and food and agriculture.
Collapse
Affiliation(s)
- Bianca Datta
- MIT Media Lab, Massachusetts Institute of Technology, 20 Ames Street, Cambridge, MA, 02139, USA
| | - Ellan F Spero
- Department of Materials Science & Engineering, Massachusetts Institute of Technology, 77 Massachusetts Avenue, Cambridge, MA, 02139, USA
- Station1, 280 Merrimack Street, Lawrence, MA, 01843, USA
| | - Francisco J Martin-Martinez
- Station1, 280 Merrimack Street, Lawrence, MA, 01843, USA
- Department of Chemistry, Swansea University, Singleton Park, Swansea, Wales, SA2 8PP, UK
| | - Christine Ortiz
- Department of Materials Science & Engineering, Massachusetts Institute of Technology, 77 Massachusetts Avenue, Cambridge, MA, 02139, USA
- Station1, 280 Merrimack Street, Lawrence, MA, 01843, USA
| |
Collapse
|
4
|
Yadav S, Majumder A. Biomimicked hierarchical 2D and 3D structures from natural templates: applications in cell biology. Biomed Mater 2021; 16. [PMID: 34438385 DOI: 10.1088/1748-605x/ac21a7] [Citation(s) in RCA: 4] [Impact Index Per Article: 1.3] [Reference Citation Analysis] [Abstract] [Key Words] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Received: 01/02/2021] [Accepted: 08/26/2021] [Indexed: 11/11/2022]
Abstract
Intricate structures of natural surfaces and materials have amazed people over the ages. The unique properties of various surfaces also created interest and curiosity in researchers. In the recent past, with the advent of superior microscopy techniques, we have started to understand how these complex structures provide superior properties. With that knowledge, scientists have developed various biomimicked and bio-inspired surfaces for different non-biological applications. In the last two decades, we have also started to learn how structures of the tissue microenvironment influence cell function and behaviour, both in physiological and pathological conditions. Hence, it became essential to decipher the role and importance of structural hierarchy in the cellular context. With advances in microfabricated techniques, such complex structures were made by superimposing features of different dimensions. However, the fabricated topographies are far from matching the complexities presentin vivo. Hence, the need of biomimicking the natural surfaces for cellular applications was felt. In this review, we discuss a few examples of hierarchical surfaces found in plants, insects, and vertebrates. Such structures have been widely biomimicked for various applications but rarely studied for cell-substrate interaction and cellular response. Here, we discuss the research work wherein 2D hierarchical substrates were prepared using biomimicking to understand cellular functions such as adhesion, orientation, differentiation, and formation of spheroids. Further, we also present the status of ongoing research in mimicking 3D tissue architecture using de-cellularized plant-based and tissue/organ-based scaffolds. We will also discuss 3D printing for fabricating 2D and 3D hierarchical structures. The review will end by highlighting the various advantages and research challenges in this approach. The biomimickedin-vivolike substrate can be used to better understand cellular physiology, and for tissue engineering.
Collapse
Affiliation(s)
- Shital Yadav
- Department of Chemical Engineering, Indian Institute of Technology Bombay, Mumbai 400076, India
| | - Abhijit Majumder
- Department of Chemical Engineering, Indian Institute of Technology Bombay, Mumbai 400076, India
| |
Collapse
|
5
|
Kertész K, Bálint Z, Piszter G, Horváth ZE, Biró LP. Multi-instrumental techniques for evaluating butterfly structural colors: A case study on Polyommatus bellargus (Rottemburg, 1775) (Lepidoptera: Lycaenidae: Polyommatinae). ARTHROPOD STRUCTURE & DEVELOPMENT 2021; 61:101010. [PMID: 33486292 DOI: 10.1016/j.asd.2020.101010] [Citation(s) in RCA: 3] [Impact Index Per Article: 1.0] [Reference Citation Analysis] [Abstract] [Key Words] [MESH Headings] [Track Full Text] [Subscribe] [Scholar Register] [Received: 06/30/2020] [Revised: 11/13/2020] [Accepted: 11/16/2020] [Indexed: 06/12/2023]
Abstract
Color is an important communication channel for day-flying butterflies. Chemical (pigmentary) coloration is often supplemented by physical color generated by photonic nanostructures. These nanoarchitectures - which are characteristic for a given species - exhibit wavelength ranges in which light propagation is forbidden. The photonic nanoarchitectures are located in the lumen of the wing scales and are developed individually by each scale during metamorphosis. This self-assembly process is governed by the genes in the nucleus of the scale producing cell. It is crucial to establish well-defined measurement methods for the unambiguous characterization and comparison of colors generated in such a complex manner. Owing to the intricate architecture ordered at multiple levels (from centimeters to tens of nanometers), the precise quantitative determination of butterfly wing coloration is not trivial. In this paper, we present an overview of several optical spectroscopy measurement methods and illustrate techniques for processing the obtained data, using the species Polyommatus bellargus as a test case, the males of which exhibit a variation in their blue structural color that is easily recognizable to the naked eye. The benefits and drawbacks of these optical methods are discussed and compared. Furthermore, the origin of the color differences is explained in relation to differences in the wing scale nanomorphology revealed by electron microscopy. This in turn is tentatively associated with the unusually large genetic drift reported for this species in the literature.
Collapse
Affiliation(s)
- Krisztián Kertész
- Institute of Technical Physics and Materials Science, Centre for Energy Research, P.O. Box 49, H-1525 Budapest, Hungary.
| | - Zsolt Bálint
- Hungarian Natural History Museum, Baross utca 13, H-1088 Budapest, Hungary
| | - Gábor Piszter
- Institute of Technical Physics and Materials Science, Centre for Energy Research, P.O. Box 49, H-1525 Budapest, Hungary
| | - Zsolt Endre Horváth
- Institute of Technical Physics and Materials Science, Centre for Energy Research, P.O. Box 49, H-1525 Budapest, Hungary
| | - László Péter Biró
- Institute of Technical Physics and Materials Science, Centre for Energy Research, P.O. Box 49, H-1525 Budapest, Hungary
| |
Collapse
|
6
|
Kohri M. Progress in polydopamine-based melanin mimetic materials for structural color generation. SCIENCE AND TECHNOLOGY OF ADVANCED MATERIALS 2021; 21:833-848. [PMID: 33536837 PMCID: PMC7832497 DOI: 10.1080/14686996.2020.1852057] [Citation(s) in RCA: 16] [Impact Index Per Article: 5.3] [Reference Citation Analysis] [Abstract] [Key Words] [Track Full Text] [Subscribe] [Scholar Register] [Received: 10/20/2020] [Revised: 11/11/2020] [Accepted: 11/13/2020] [Indexed: 05/04/2023]
Abstract
Structural color is a color derived from optical interaction between light and a microstructure and is often seen in nature. Natural melanin plays an important role in bright structural coloration. For example, the vivid colors of peacock feathers are due to structural colors. The periodic arrangement of melanin granules inside the feathers leads to light interference, and the black granules absorb scattered light well, resulting in bright structural color. In recent years, polydopamine (PDA) has attracted attention as a melanin mimetic material. This review article summarizes recent research on structural coloration using PDA-based artificial melanin materials. It also outlines possible applications using bright structural colors realized by artificial melanin materials and future perspectives.
Collapse
Affiliation(s)
- Michinari Kohri
- Department of Applied Chemistry and Biotechnology, Graduate School of Engineering, Chiba University, Chiba, Japan
| |
Collapse
|
7
|
Vaz R, Frasco MF, Sales MGF. Photonics in nature and bioinspired designs: sustainable approaches for a colourful world. NANOSCALE ADVANCES 2020; 2:5106-5129. [PMID: 36132040 PMCID: PMC9416915 DOI: 10.1039/d0na00445f] [Citation(s) in RCA: 22] [Impact Index Per Article: 5.5] [Reference Citation Analysis] [Abstract] [Grants] [Track Full Text] [Subscribe] [Scholar Register] [Received: 05/30/2020] [Accepted: 08/10/2020] [Indexed: 05/07/2023]
Abstract
Biological systems possess nanoarchitectures that have evolved for specific purposes and whose ability to modulate the flow of light creates an extraordinary diversity of natural photonic structures. In particular, the striking beauty of the structural colouration observed in nature has inspired technological innovation in many fields. Intense research has been devoted to mimicking the unique vivid colours with newly designed photonic structures presenting stimuli-responsive properties, with remarkable applications in health care, safety and security. This review highlights bioinspired photonic approaches in this context, starting by presenting many appealing examples of structural colours in nature, followed by describing the versatility of fabrication methods and designed coloured structures. A particular focus is given to optical sensing for medical diagnosis, food control and environmental monitoring, which has experienced a significant growth, especially considering the advances in obtaining inexpensive miniaturized systems, more reliability, fast responses, and the use of label-free layouts. Additionally, naturally derived biomaterials and synthetic polymers are versatile and fit many different structural designs that are underlined. Progress in bioinspired photonic polymers and their integration in novel devices is discussed since recent developments have emerged to lift the expectations of smart, flexible, wearable and portable sensors. The discussion is expanded to give emphasis on additional functionalities offered to related biomedical applications and the use of structural colours in new sustainable strategies that could meet the needs of technological development.
Collapse
Affiliation(s)
- Raquel Vaz
- BioMark Sensor Research/UC, Faculty of Sciences and Technology, Coimbra University Coimbra Portugal
- BioMark Sensor Research/ISEP, School of Engineering, Polytechnic Institute of Porto Porto Portugal
- CEB, Centre of Biological Engineering, Minho University Braga Portugal
| | - Manuela F Frasco
- BioMark Sensor Research/UC, Faculty of Sciences and Technology, Coimbra University Coimbra Portugal
- BioMark Sensor Research/ISEP, School of Engineering, Polytechnic Institute of Porto Porto Portugal
- CEB, Centre of Biological Engineering, Minho University Braga Portugal
| | - M Goreti F Sales
- BioMark Sensor Research/UC, Faculty of Sciences and Technology, Coimbra University Coimbra Portugal
- BioMark Sensor Research/ISEP, School of Engineering, Polytechnic Institute of Porto Porto Portugal
- CEB, Centre of Biological Engineering, Minho University Braga Portugal
| |
Collapse
|
8
|
Freyer P, Stavenga DG. Biophotonics of diversely coloured peacock tail feathers. Faraday Discuss 2020; 223:49-62. [PMID: 32720960 DOI: 10.1039/d0fd00033g] [Citation(s) in RCA: 5] [Impact Index Per Article: 1.3] [Reference Citation Analysis] [Abstract] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Indexed: 11/21/2022]
Abstract
Peacock feathers feature a rich gamut of colours, created by a most sophisticated structural colouration mechanism. The feather barbules contain biophotonic structures consisting of two-dimensionally-ordered lattices of cylindrical melanosomes and air channels embedded in keratin. Here, we study the reflectance characteristics of the various peacock tail feather colours by applying bifurcated-probe- and micro-spectrophotometry and imaging scatterometry. We compare the experimental results with published anatomical SEM and TEM data, using a transfer-matrix based effective-medium multilayer model that includes the number and diameter of the melanosome rodlets and air channels, the lattice spacing and the keratin cortex thickness, together with the recently determined wavelength-dependence of the refractive indices of keratin and melanin. Slight variations in the parameter values cause substantial changes in the spectral position and shape of the reflectance bands. We find that the number of layers crucially determines the number of peaks in the reflectance spectra. For a small number of melanosome layers, the reflectance band shape is particularly sensitive to the properties of the uppermost layer, which provides a simple mechanism for tuning the feather colours.
Collapse
Affiliation(s)
- Pascal Freyer
- Zernike Institute for Advanced Materials, University of Groningen, Nijenborgh 4, 9747AG Groningen, The Netherlands.
| | | |
Collapse
|
9
|
Qiu W, Chuong CM, Lei M. Regulation of melanocyte stem cells in the pigmentation of skin and its appendages: Biological patterning and therapeutic potentials. Exp Dermatol 2019; 28:395-405. [PMID: 30537004 DOI: 10.1111/exd.13856] [Citation(s) in RCA: 40] [Impact Index Per Article: 8.0] [Reference Citation Analysis] [Abstract] [Key Words] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Received: 09/26/2018] [Revised: 11/27/2018] [Accepted: 12/05/2018] [Indexed: 12/13/2022]
Abstract
Skin evolves essential appendages and indispensable types of cells that synergistically insulate the body from environmental insults. Residing in the specific regions in the skin such as epidermis, dermis and hair follicle, melanocytes perform an array of vital functions including defending the ultraviolet radiation and diversifying animal appearance. As one of the adult stem cells, melanocyte stem cells in the hair follicle bulge niche can proliferate, differentiate and keep quiescence to control and coordinate tissue homeostasis, repair and regeneration. In synchrony with hair follicle stem cells, melanocyte stem cells in the hair follicles undergo cyclic activation, degeneration and resting phases, to pigment the hairs and to preserve the stem cells. Disorder of melanocytes results in severe skin problems such as canities, vitiligo and even melanoma. Here, we compare and summarize recent discoveries about melanocyte in the skin, particularly in the hair follicle. A better understanding of the physiological and pathological regulation of melanocyte and melanocyte stem cell behaviours will help to guide the clinical applications in regenerative medicine.
Collapse
Affiliation(s)
- Weiming Qiu
- Department of Dermatology, Wuhan General Hospital of Chinese People's Liberation Army, Wuhan, China
| | - Cheng-Ming Chuong
- Department of Pathology, University of Southern California, Los Angeles, California.,Integrative Stem Cell Center, China Medical University Hospital, China Medical University, Taichung, Taiwan
| | - Mingxing Lei
- Integrative Stem Cell Center, China Medical University Hospital, China Medical University, Taichung, Taiwan.,Institute of New Drug Development, College of Biopharmaceutical and Food Sciences, China Medical University, Taichung, Taiwan
| |
Collapse
|
10
|
Burg SL, Parnell AJ. Self-assembling structural colour in nature. JOURNAL OF PHYSICS. CONDENSED MATTER : AN INSTITUTE OF PHYSICS JOURNAL 2018; 30:413001. [PMID: 30137023 DOI: 10.1088/1361-648x/aadc95] [Citation(s) in RCA: 26] [Impact Index Per Article: 4.3] [Reference Citation Analysis] [Abstract] [MESH Headings] [Track Full Text] [Subscribe] [Scholar Register] [Indexed: 06/08/2023]
Abstract
The diversity and vividness of structural colour in the natural world have been recognised as far back as William Hooke in the 17th century. Whilst it is only recently that advances in the field have revealed the elegance and finesse of the physics used to create these effects. In this topical review we will highlight some of the structures and effects responsible for colour in butterfly scales, bird feathers, plants, insects and beetle elytra that have been studied to date. We will discuss the structures responsible and look at similarities and differences in these structures between species. This will be alongside our current understanding of how these are created biologically, how they develop structurally and what control mechanisms nature has at its disposal to control structure formation.
Collapse
Affiliation(s)
- Stephanie L Burg
- The Department of Physics and Astronomy, The University of Sheffield, Hicks Building, Western Bank, Sheffield S3 7RH, United Kingdom
| | | |
Collapse
|
11
|
Okazaki T. Ultraviolet Reflectance Structures of Peacock Feathers. Zoolog Sci 2018; 35:421-426. [PMID: 30298782 DOI: 10.2108/zs180012] [Citation(s) in RCA: 0] [Impact Index Per Article: 0] [Reference Citation Analysis] [Abstract] [Key Words] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Indexed: 11/17/2022]
Abstract
Male peacock (Pavo cristatus) tail feathers have an eyespot pattern with an inconspicuous black or dark blue center surrounded by brilliant, structural colors, such as blue, light brown, and yellow-green. Under ultraviolet A (UVA), the central part of the eyespot reflects UVA better than the surrounding parts. Herein, I examined various areas of eyespots on paraffin sections of feathers using an optical microscope, and characterized positional relationships between barbs and barbules. These analyses confirmed that barbules in the central part of the eyespot are in a horizontal position with respect to the barb, and that light transmission from the central part is less than that from the other parts. In addition, I compared microstructures of barbules in the central part of eyespot with those in surrounding areas using transmission electron microscope analysis. The melanin rods in the barbules reflecting yellow-green color comprise several ordered lattice structures. In contrast, melanin rods in the central part of the eyespot were only distributed in 1-3 layers on a part of the front side of the barbules. I also demonstrated that keratin structures of barbules are homogeneous in the central part of the eyespot, but have fibrous structures with many voids in the yellow-green parts. Collectively, the present observations suggest that feathers in the central part of the eyespot reflect UVA depending on the direction of irradiation, and these properties are governed by configurations of barbules relative to barbs, melanin rod distributions, and the presence of keratin structures with gaps.
Collapse
Affiliation(s)
- Toshio Okazaki
- Department of Animal Health Science, Yamazaki Gakuen University, Minami-osawa 4-7-2, Hachiouji, Tokyo 192-0364, Japan
| |
Collapse
|
12
|
Iwasaki T, Tamai Y, Yamamoto M, Taniguchi T, Kishikawa K, Kohri M. Melanin Precursor Influence on Structural Colors from Artificial Melanin Particles: PolyDOPA, Polydopamine, and Polynorepinephrine. LANGMUIR : THE ACS JOURNAL OF SURFACES AND COLLOIDS 2018; 34:11814-11821. [PMID: 30183312 DOI: 10.1021/acs.langmuir.8b02444] [Citation(s) in RCA: 46] [Impact Index Per Article: 7.7] [Reference Citation Analysis] [Abstract] [MESH Headings] [Track Full Text] [Subscribe] [Scholar Register] [Indexed: 06/08/2023]
Abstract
Polydopamine (PDA) is of interest as a mimetic material of melanin to produce structural color materials. Herein, to investigate the influence of the material composition of the artificial melanin particles on structural color, we demonstrated the preparation of core-shell particles by polymerization of norepinephrine or 3,4-dihydroxyphenylalanine, which are melanin precursors similar to dopamine, in the presence of polystyrene particles. It was revealed that the arrays of the prepared particles produce high-visibility structural color because of absorption of scattering light. Although poly(3,4-dihydroxyphenylalanine) showed the same tendency as PDA which was previous studied, polynorepinephrine can easily produce a smooth and thick shell layer compared with that of PDA, and pellets consisting of the particles showed angle-dependent structural color. Therefore, the artificial melanin particles that produce angle-dependent structural color became stable than ever before. These results indicated that material compositions of artificial melanin particles have influence on structural color, and an important finding for application as a coloring material was obtained.
Collapse
Affiliation(s)
- Takeshi Iwasaki
- Division of Applied Chemistry and Biotechnology, Graduate School of Engineering , Chiba University , 1-33 Yayoi-cho , Inage-ku, Chiba 263-8522 , Japan
- Fundamental Technology Division, Research Institute , National Printing Bureau , 6-4-20 Sakawa , Odawara , Kanagawa 256-0816 , Japan
| | - Yuki Tamai
- Division of Applied Chemistry and Biotechnology, Graduate School of Engineering , Chiba University , 1-33 Yayoi-cho , Inage-ku, Chiba 263-8522 , Japan
| | - Mikiya Yamamoto
- Division of Applied Chemistry and Biotechnology, Graduate School of Engineering , Chiba University , 1-33 Yayoi-cho , Inage-ku, Chiba 263-8522 , Japan
| | - Tatsuo Taniguchi
- Division of Applied Chemistry and Biotechnology, Graduate School of Engineering , Chiba University , 1-33 Yayoi-cho , Inage-ku, Chiba 263-8522 , Japan
| | - Keiki Kishikawa
- Division of Applied Chemistry and Biotechnology, Graduate School of Engineering , Chiba University , 1-33 Yayoi-cho , Inage-ku, Chiba 263-8522 , Japan
| | - Michinari Kohri
- Division of Applied Chemistry and Biotechnology, Graduate School of Engineering , Chiba University , 1-33 Yayoi-cho , Inage-ku, Chiba 263-8522 , Japan
| |
Collapse
|
13
|
Han Z, Feng X, Guo Z, Niu S, Ren L. Flourishing Bioinspired Antifogging Materials with Superwettability: Progresses and Challenges. ADVANCED MATERIALS (DEERFIELD BEACH, FLA.) 2018; 30:e1704652. [PMID: 29441617 DOI: 10.1002/adma.201704652] [Citation(s) in RCA: 77] [Impact Index Per Article: 12.8] [Reference Citation Analysis] [Abstract] [Key Words] [Track Full Text] [Subscribe] [Scholar Register] [Received: 08/16/2017] [Revised: 11/05/2017] [Indexed: 05/20/2023]
Abstract
Antifogging (AF) structure materials found in nature have great potential for enabling novel and emerging products and technologies to facilitate the daily life of human societies, attracting enormous research interests owing to their potential applications in display devices, traffics, agricultural greenhouse, food packaging, solar products, and other fields. The outstanding performance of biological AF surfaces encourages the rapid development and wide application of new AF materials. In fact, AF properties are inextricably associated with their surface superwettability. Generally, the superwettability of AF materials depends on a combination of their surface geometrical structures and surface chemical compositions. To explore their general design principles, recent progresses in the investigation of bioinspired AF materials are summarized herein. Recent developments of the mechanism, fabrication, and applications of bioinspired AF materials with superwettability are also a focus. This includes information on constructing superwetting AF materials based on designing the topographical structure and regulating the surface chemical composition. Finally, the remaining challenges and promising breakthroughs in this field are also briefly discussed.
Collapse
Affiliation(s)
- Zhiwu Han
- Key Laboratory of Bionic Engineering (Ministry of Education), Jilin University, Changchun, 130022, Jilin, P. R. China
| | - Xiaoming Feng
- Key Laboratory of Bionic Engineering (Ministry of Education), Jilin University, Changchun, 130022, Jilin, P. R. China
| | - Zhiguang Guo
- Key Laboratory of Bionic Engineering (Ministry of Education), Jilin University, Changchun, 130022, Jilin, P. R. China
- State Key Laboratory of Solid Lubrication, Lanzhou Institute of Chemical Physics, Chinese Academy of Sciences, Lanzhou, 730000, China
| | - Shichao Niu
- Key Laboratory of Bionic Engineering (Ministry of Education), Jilin University, Changchun, 130022, Jilin, P. R. China
| | - Luquan Ren
- Key Laboratory of Bionic Engineering (Ministry of Education), Jilin University, Changchun, 130022, Jilin, P. R. China
| |
Collapse
|
14
|
Okazaki T. Reflectance Spectra of Peacock Feathers and the Turning Angles of Melanin Rods in Barbules. Zoolog Sci 2018; 35:86-91. [PMID: 29417896 DOI: 10.2108/zs170091] [Citation(s) in RCA: 3] [Impact Index Per Article: 0.5] [Reference Citation Analysis] [Abstract] [Key Words] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Indexed: 11/17/2022]
Abstract
I analyzed the association between the reflectance spectra and melanin rod arrangement in barbules of the eyespot of peacock feathers. The reflectance spectra from the yellow-green feather of the eyespot indicated double peaks of 430 and 540 nm. The maximum reflectance spectrum of the blue feather was 480 nm, and that of the dark blue feather was 420 nm. The reflectance spectra from brown feathers indicated double peaks of 490 and 610 nm. Transmission electron microscopic analysis confirmed that melanin rods were arranged fanwise in the outer layer toward the barbule tips. In addition, using polarized light microscope, I attempted to determine whether the turning angles of melanin rods in the barbules reflected different colors. The turning angle of the polarizing axis of the barbules was supported by that of the melanin rods, observed using transmission electron microscopic images. To compare the turning angle of melanin rods in the respective barbules, I calculated the opening width of the fanwise melanin rods by dividing the width of the barbules by the turning angle of the polarizing axis of barbules and obtained a positive correlation between the reflectance spectra and opening width of the fanwise melanin rods. Moreover, the widely spreading reflection from the barbules may occur because of the fanwise melanin rod arrangement.
Collapse
Affiliation(s)
- Toshio Okazaki
- Department of Animal Health Science, Yamazaki Gakuen University, Minami-osawa 4-7-2, Hachiouji, Tokyo 192-0364, Japan
| |
Collapse
|
15
|
Belušič G, Ilić M, Meglič A, Pirih P. A fast multispectral light synthesiser based on LEDs and a diffraction grating. Sci Rep 2016; 6:32012. [PMID: 27558155 PMCID: PMC4997569 DOI: 10.1038/srep32012] [Citation(s) in RCA: 24] [Impact Index Per Article: 3.0] [Reference Citation Analysis] [Abstract] [Track Full Text] [Download PDF] [Figures] [Journal Information] [Subscribe] [Scholar Register] [Received: 06/28/2016] [Accepted: 08/01/2016] [Indexed: 12/02/2022] Open
Abstract
Optical experiments often require fast-switching light sources with adjustable bandwidths and intensities. We constructed a wavelength combiner based on a reflective planar diffraction grating and light emitting diodes with emission peaks from 350 to 630 nm that were positioned at the angles corresponding to the first diffraction order of the reversed beam. The combined output beam was launched into a fibre. The spacing between 22 equally wide spectral bands was about 15 nm. The time resolution of the pulse-width modulation drivers was 1 ms. The source was validated with a fast intracellular measurement of the spectral sensitivity of blowfly photoreceptors. In hyperspectral imaging of Xenopus skin circulation, the wavelength resolution was adequate to resolve haemoglobin absorption spectra. The device contains no moving parts, has low stray light and is intrinsically capable of multi-band output. Possible applications include visual physiology, biomedical optics, microscopy and spectroscopy.
Collapse
Affiliation(s)
- Gregor Belušič
- Department of Biology, Biotechnical Faculty, University of Ljubljana, Ljubljana, Slovenia
| | - Marko Ilić
- Department of Biology, Biotechnical Faculty, University of Ljubljana, Ljubljana, Slovenia
| | - Andrej Meglič
- Department of Biology, Biotechnical Faculty, University of Ljubljana, Ljubljana, Slovenia
| | - Primož Pirih
- Sokendai (The Graduate University of Advanced Studies), Hayama, Kanagawa, Japan
| |
Collapse
|