Ultra-high peak rejection notch microwave photonic filter using a single silicon microring resonator

Ultra-Narrow Bandwidth Microwave Photonic Filter Implemented by Single Longitudinal Mode Parity Time Symmetry Brillouin Fiber Laser

In this paper, a novel microwave photonic filter (MPF) based on a single longitudinal mode Brillouin laser achieved by parity time (PT) symmetry mode selection is proposed, and its unparalleled ultra-narrow bandwidth as low as to sub-kHz together with simple and agile tuning performance is experimentally verified. The Brillouin fiber laser ring resonator is cascaded with a PT symmetric system to achieve this MPF. Wherein, the Brillouin laser resonator is excited by a 5 km single mode fiber to generate Brillouin gain, and the PT symmetric system is configured with Polarization Beam Splitter (PBS) and polarization controller (PC) to achieve PT symmetry. Thanks to the significant enhancement of the gain difference between the main mode and the edge mode when the polarization state PT symmetry system breaks, a single mode oscillating Brillouin laser is generated. Through the selective amplification of sideband modulated signals by ultra-narrow linewidth Brillouin single mode laser gain, the MPF with ultra-narrow single passband performance is obtained. By simply tuning the central wavelength of the stimulated Brillouin scattering (SBS) pumped laser to adjust the Brillouin oscillation frequency, the gain position of the Brillouin laser can be shifted, thereby achieving flexible tunability. The experimental results indicate that the MPF proposed in this paper achieves a single pass band narrow to 72 Hz and the side mode rejection ratio of more than 18 dB, with a center frequency tuning range of 0-20 GHz in the testing range of vector network analysis, which means that the MPF possesses ultra high spectral resolution and enormous potential application value in the domain of ultra fine microwave spectrum filtering such as radar imaging and electronic countermeasures.

Recent advances in integrated optical directed logic operations for high performance optical computing: a review

Optical directed logic (DL) is a novel logic operation scheme that employs electrical signals as operands to control the working states of optical switches to perform the logic functions. This review first provides an overview of the concept and working principle of DL. The developing trends of DL computing are then discussed in detail, including the fundamental optical DL gates, combinational optical DL operations, reconfigurable logic computing, low power optical logic computing, and programmable photonic network. The concluding remarks provide an outlook on the DL future development and its impacts in optical computing.

All-optical tunable microwave filter with ultra-high peak rejection and low-power consumption

We propose and experimentally demonstrate microwave photonic filters (MPFs) with high rejection ratios and large tuning ranges of the central frequency and bandwidth leveraging four cascaded opto-mechanical microring resonators (MRRs). As half waveguides of each MRR are free-hanging in the air, the nonlinear effects in the opto-mechanical MRRs could be efficiently excited. Consequently, the transmission characteristics of the cascaded MRRs could be flexibly manipulated by adjusting the input pump powers. When the resonant wavelengths of every two MRRs are tuned to be aligned, the transmission spectrum of the silicon device is a notch bimodal distribution with high extinction ratios. The optical carrier is fixed at the flat region of the bimodal distribution. Under optical double sideband (ODSB) modulation, MPFs with high rejection ratios could be achieved due to the high extinction ratio of the cascaded rings. Moreover, the central frequency and bandwidth of the MPFs could be tuned by properly adjusting the pump powers. In the experiment, with a low power of 2.56 mW, the MPF central frequency and bandwidth could be tuned from 7.12 GHz to 39.16 GHz and from 11.3 GHz to 17.6 GHz, respectively. More importantly, the MPF rejection ratios are beyond 60 dB. Furthermore, during the bandwidth tuning process, an MPF response with approximately equiripple stopband could be realized. Owing to the dominant advantages of high rejection ratios, large tuning ranges, low power consumption and compact size, the silicon device has many significant applications in on-chip microwave systems.

Performance improvements of a tunable bandpass microwave photonic filter based on a notch ring resonator using phase modulation with dual optical carriers

A tunable bandpass microwave photonic filter can be achieved by using a notch ring resonator with optical phase modulation. However, the filter's out of band rejection ratio and shape factor are limited due to the ring resonator's residual phase, which can seriously degrade the filter's performance. By using dual optical carriers and setting their wavelengths oppositely detuned from two resonant frequencies of a notch ring resonator, the residual phase induced by the ring resonator at radio frequencies falling outside the region of the notch stopband is reduced, thus the out-of-band rejection ratio and shape factor of the microwave photonic filter are greatly improved. The proposed microwave photonic filter was both verified theoretically and experimentally. Compared with single optical carrier method, the out-of-band rejection ratio of the filter can be enhanced from 17.7dB to 31.5dB, and the filter's shape factor is improved from 3.05 to 1.78. Besides, the filter's frequency and bandwidth can be tuned by varying the wavelengths of the two optical carriers and the ring resonator's coupling coefficients. Finally, a tunable bandpass microwave photonic filter with frequency tuning range of 2~14GHz, 3dB bandwidth tuning range of 0.673~2.798GHz is demonstrated.

Recent Trends and Advances of Silicon-Based Integrated Microwave Photonics

Multitude applications of photonic devices and technologies for the generation and manipulation of arbitrary and random microwave waveforms, at unprecedented processing speeds, have been proposed in the literature over the past three decades. This class of photonic applications for microwave engineering is known as microwave photonics (MWP). The vast capabilities of MWP have allowed the realization of key functionalities which are either highly complex or simply not possible in the microwave domain alone. Recently, this growing field has adopted the integrated photonics technologies to develop microwave photonic systems with enhanced robustness as well as with a significant reduction of size, cost, weight, and power consumption. In particular, silicon photonics technology is of great interest for this aim as it offers outstanding possibilities for integration of highly-complex active and passive photonic devices, permitting monolithic integration of MWP with high-speed silicon electronics. In this article, we present a review of recent work on MWP functions developed on the silicon platform. We particularly focus on newly reported designs for signal modulation, arbitrary waveform generation, filtering, true-time delay, phase shifting, beam steering, and frequency measurement.

Microwave Photonic Signal Processing and Sensing Based on Optical Filtering

Microwave photonics, based on optical filtering techniques, are attractive for wideband signal processing and high-performance sensing applications, since it brings significant benefits to the fields by overcoming inherent limitations in electronic approaches and by providing immunity to electromagnetic interference. Recent developments in optical filtering based microwave photonics techniques are presented in this paper. We present single sideband modulation schemes to eliminate dispersion induced power fading in microwave optical links and to provide high-resolution spectral characterization functions, single passband microwave photonic filters to address the challenges of eliminating the spectral periodicity in microwave photonic signal processors, and review the approaches for high-performance sensing through implementing microwave photonics filters or optoelectronic oscillators to enhance measurement resolution.

On-chip silicon photonic signaling and processing: a review

The arrival of the big data era has driven the rapid development of high-speed optical signaling and processing, ranging from long-haul optical communication links to short-reach data centers and high-performance computing, and even micro-/nano-scale inter-chip and intra-chip optical interconnects. On-chip photonic signaling is essential for optical data transmission, especially for chip-scale optical interconnects, while on-chip photonic processing is a critical technology for optical data manipulation or processing, especially at the network nodes to facilitate ultracompact data management with low power consumption. In this paper, we review recent research progress in on-chip photonic signaling and processing on silicon photonics platforms. Firstly, basic key devices (lasers, modulators, detectors) are introduced. Secondly, for on-chip photonic signaling, we present recent works on on-chip data transmission of advanced multi-level modulation signals using various silicon photonic integrated devices (microring, slot waveguide, hybrid plasmonic waveguide, subwavelength grating slot waveguide). Thirdly, for on-chip photonic processing, we summarize recent works on on-chip data processing of advanced multi-level modulation signals exploiting linear and nonlinear effects in different kinds of silicon photonic integrated devices (strip waveguide, directional coupler, 2D grating coupler, microring, silicon-organic hybrid slot waveguide). Various photonic processing functions are demonstrated, such as photonic switch, filtering, polarization/wavelength/mode (de)multiplexing, wavelength conversion, signal regeneration, optical logic and computing. Additionally, we also introduce extended silicon+ photonics and show recent works on on-chip graphene-silicon photonic signal processing. The advances in on-chip silicon photonic signaling and processing with favorable performance pave the way to integrate complete optical communication systems on a monolithic chip and integrate silicon photonics and silicon nanoelectronics on a chip. It is believed that silicon photonics will enable more and more emerging advanced applications even beyond silicon photonic signaling and processing.

Polarization- and wavelength-independent SBS-based filters for high resolution optical spectrum measurement

A polarization-independent narrow passband optical filter with a FWHM bandwidth of ~10 MHz based on stimulated Brillouin scattering (SBS) effect is proposed and experimentally demonstrated. By optimizing the parameters of a depolarizer consisting of a power-splitting Mach-Zehnder interferometer (MZI) structure, degree of polarization (DOP) of the pump source can be reduced to less than 5%. Consequently frequency response of the SBS-based filter remains almost unchanged when the state of polarization (SOP) of the input signal varies and the corresponding polarization-dependent gain (PDG) is less than 1 dB. And the experimental results also indicate that the proposed filter can realize the wavelength-independent operation over a range of ~30 nm. Furthermore, high resolution optical spectrum measurement utilizing this novel filter is investigated. For an input signal with a frequency interval of 30 MHz in arbitrary SOP, spectral details can be clearly observed and the power stability of the measured spectra can be improved from 3~5 dB to less than 0.5 dB, which benefitting from the polarization independent operation of the forementioned filter. Moreover, considering the resolution degradation of the measured spectra induced by the frequency shift in the depolarizer, a sweep speed of 5 nm/s for the pump source and a delayed fiber length of 2000 m in the MZI should be used to guarantee the desired high spectral resolution of ~10 MHz.

Tunable photonic radiofrequency filter with complementary bandpass and bandstop responses

A photonic radiofrequency (RF) filter with two complementary bandpass and bandstop responses that is capable of simultaneously providing a single transmission channel at one port and a notch rejection channel at the other port is proposed. An integrated polarization division-multiplexing Mach-Zehnder modulator and the in-fiber stimulated Brillouin scattering effect are used to control the amplitudes and phases of the RF modulation sidebands along two orthogonal states of polarization to generate two complementary bandpass and bandstop responses at two output ports, respectively. Experiments are then performed. Two complementary responses are simultaneously generated in a high-frequency resolution of ∼20  MHz, with a rejection over 35 or 51 dB being achieved for the passband or stopband. A tunable central frequency to the bandpass and bandstop responses is also demonstrated within the range from 3 to 15 GHz.

Spatial Division Multiplexed Microwave Signal processing by selective grating inscription in homogeneous multicore fibers

The use of Spatial Division Multiplexing for Microwave Photonics signal processing is proposed and experimentally demonstrated, for the first time to our knowledge, based on the selective inscription of Bragg gratings in homogeneous multicore fibers. The fabricated devices behave as sampled true time delay elements for radiofrequency signals offering a wide range of operation possibilities within the same optical fiber. The key to processing flexibility comes from the implementation of novel multi-cavity configurations by inscribing a variety of different fiber Bragg gratings along the different cores of a 7-core fiber. This entails the development of the first fabrication method to inscribe high-quality gratings characterized by arbitrary frequency spectra and located in arbitrary longitudinal positions along the individual cores of a multicore fiber. Our work opens the way towards the development of unique compact fiber-based solutions that enable the implementation of a wide variety of 2D (spatial and wavelength diversity) signal processing functionalities that will be key in future fiber-wireless communications scenarios. We envisage that Microwave Photonics systems and networks will benefit from this technology in terms of compactness, operation versatility and performance stability.

Low power consumption and continuously tunable all-optical microwave filter based on an opto-mechanical microring resonator

We propose and experimentally demonstrate a continuously tunable all-optical microwave filter using a silicon opto-mechanical microring resonator (MRR). By finely adjusting the pump light with submilliwatt power level, transmission spectrum of the MRR could be continuously shifted based on the nonlinear effects, including the opto-mechanical effect and thermo-optic effect. Therefore, in the case of optical single sideband (OSSB) modulation, the frequency intervals between the optical carrier (near one MRR resonance) and the corresponding resonance could be flexibly manipulated, which is the critical factor to achieve continuously tunable microwave photonic filter (MPF). In the experiment, the central frequency of the MPF could be continuously tuned from 6 GHz to 19 GHz with the pump power lower than -2.5 dBm. The proposed opto-mechanical device is competent to process microwave signals with dominant advantages, such as compact footprint, all-optical control and low power consumption. In the future, using light to control light, the opto-mechanical structure on silicon platforms might have many other potential applications in microwave systems, such as microwave switch.

Tunable megahertz bandwidth microwave photonic notch filter based on a silica microsphere cavity

We propose and experimentally demonstrate a tunable microwave photonic notch filter with a megahertz order bandwidth based on a silica microsphere cavity coupled by an optical microfiber. The silica microsphere with a quality factor of hundreds of millions offers a full width at half-maximum bandwidth down to the order of megahertz in the transmission spectrum. Due to the coupling flexibility between the microcavity and the optical microfiber, the bandwidth and suppression ratio can be tuned and optimized to get a rejection ratio beyond 30 dB. The tunability of over 15 GHz is also achieved. To the best of our knowledge, this single-stopband microwave photonic filter has the narrowest bandwidth filter that has ever been experimentally demonstrated. This microwave photonic notch filter shows distinct advantages of high selectivity, compactness, flexibility, and low insertion loss.