New modes in label-free super resolution based on photo-modulated reflectivity

Roadmap on Label-Free Super-Resolution Imaging

Label-free super-resolution (LFSR) imaging relies on light-scattering processes in nanoscale objects without a need for fluorescent (FL) staining required in super-resolved FL microscopy. The objectives of this Roadmap are to present a comprehensive vision of the developments, the state-of-the-art in this field, and to discuss the resolution boundaries and hurdles which need to be overcome to break the classical diffraction limit of the LFSR imaging. The scope of this Roadmap spans from the advanced interference detection techniques, where the diffraction-limited lateral resolution is combined with unsurpassed axial and temporal resolution, to techniques with true lateral super-resolution capability which are based on understanding resolution as an information science problem, on using novel structured illumination, near-field scanning, and nonlinear optics approaches, and on designing superlenses based on nanoplasmonics, metamaterials, transformation optics, and microsphere-assisted approaches. To this end, this Roadmap brings under the same umbrella researchers from the physics and biomedical optics communities in which such studies have often been developing separately. The ultimate intent of this paper is to create a vision for the current and future developments of LFSR imaging based on its physical mechanisms and to create a great opening for the series of articles in this field.

Far-field super-resolution chemical microscopy

Far-field chemical microscopy providing molecular electronic or vibrational fingerprint information opens a new window for the study of three-dimensional biological, material, and chemical systems. Chemical microscopy provides a nondestructive way of chemical identification without exterior labels. However, the diffraction limit of optics hindered it from discovering more details under the resolution limit. Recent development of super-resolution techniques gives enlightenment to open this door behind far-field chemical microscopy. Here, we review recent advances that have pushed the boundary of far-field chemical microscopy in terms of spatial resolution. We further highlight applications in biomedical research, material characterization, environmental study, cultural heritage conservation, and integrated chip inspection.

Second-Order Photoinduced Reflectivity for Retrieval of the Dynamics in Plasmonic Nanostructures

Measuring the change in reflectivity (ΔR) using the traditional pump-probe approach can monitor photoinduced ultrafast dynamics in matter, yet relating these dynamic to physical processes for complex systems is not unique. By applying a simple modification to the classical pump-probe technique, we simultaneously measure both the first and second order of ΔR. These additional data impose new constraints on the interpretation of the underlying ultrafast dynamics. In the first application of the approach, we probe the dynamics induced by a pump laser on the local-surface plasmon resonance (LSPR) in gold nanoantennas. Measurements of ΔR over several picoseconds and a wide range of probe wavelengths around the LSPR peak are followed by data fitting using the two-temperature model. The constraints, imposed by the second-order data, lead us to modify the model and force us to include the contribution of nonthermalized electrons in the early stages of the dynamics.

Microfluidic-based linear-optics label-free imager

Linear optics based nanoscopy previously reached resolution beyond the diffraction limit, illuminating samples in the visible light regime while allowing light to interact with freely moving metallic nanoparticles. However, the hydrodynamics governing the nanoparticle motion used to scan the sample is very complex and has low probability of achieving appropriate and fast mapping in practice. Hence, an implementation of the technique on real biological samples has not been demonstrated so far. Moreover, a suitable way to perform controlled nanoparticle scanning of biological samples is required. Here we show a solution where a microfluidic channel is used to flow and trap biological samples inside a water droplet along with suspended nanoparticles surrounded by silicone oil. The evanescent light scattered from the sample and is rescattered by the nanoparticles in the vicinity. This encodes the sub-wavelength features of the sample which can later on be decoded and reconstructed from measurements in the far field. The microfluidic system-controlled flow allows better nanoparticle scanning of the sample and maintains an isolated system for each sample in each droplet. A more localized scan at the droplet water/oil interface is also conducted using amphiphilic nanoparticles where their hydrophilic side is constrained to the droplet and their hydrophobic side is constrained to the oil. This allows higher probability of capturing evanescent fields closer to their origin, yielding better resolution and a higher signal to noise ratio. Using this system, we obtained images of an E. coli sample and demonstrated how the method yield fine resolution of the sample contours. To the best of our knowledge, this is the first time that a linear and label free optics imaging process was performed using a micro-fluidic device.

Phase-sensitive lock-in detection for high-contrast mid-infrared photothermal imaging with sub-diffraction limited resolution

Imaging of the phase output of a lock-in amplifier in mid-infrared photothermal vibrational microscopy is demonstrated for the first time in combination with nonlinear demodulation. In general, thermal blurring and heat transport phenomena contribute to the resolution and sensitivity of mid-infrared photothermal imaging. For heterogeneous samples with multiple absorbing features, if imaged in a spectral regime of comparable absorption with their embedding medium, it is demonstrated that differentiation with high contrast is achieved in complementary imaging of the phase signal obtained from a lock-in amplifier compared to standard imaging of the photothermal amplitude signal. Specifically, by investigating the relative contribution of the out-of-phase lock-in signal, information based on changes in the rate of heat transport can be extracted, and inhomogeneities in the thermal diffusion properties across the sample plane can be mapped with high sensitivity and sub-diffraction limited resolution. Under these imaging conditions, wavenumber regimes can be identified in which the thermal diffusion contributions are minimized and an enhancement of the spatial resolution beyond the diffraction limited spot size of the probe beam in the corresponding phase images is achieved. By combining relative diffusive phase imaging with nonlinear demodulation at the second harmonic, it is demonstrated that 1-μm-size melamine beads embedded in a thin layer of 4-octyl-4'-cyanobiphenyl (8CB) liquid crystal can be detected with a 1.3-μm spatial full-width at half-maximum (FWHM) resolution. Thus, imaging with a resolving power that exceeds the probe diffraction limited spot size by a factor of 2.5 is presented, which paves the route towards super-resolution, label-free imaging in the mid-infrared.

Pure sinusoidal photo-modulation using an acousto-optic modulator

We use an arbitrary waveform generator to generate a clean sinusoidal modulation from the otherwise nonlinear acousto-optic modulator (AOM). A closed loop optimization script is applied to reduce high order harmonic distortion to less than 0.05% in a high AOM diffraction efficiency regime. This low level of distortion allows us to measure the nonlinear response to photoexcitation of many materials. We demonstrate this technique in a pump-probe experiment to measure the Nonlinear Photo-Modulated Reflectivity (NPMR) of surfaces. NPMR served us as the basis for developing super-resolution microscopy for non-fluorescence samples (label-free) as well as a tool in studying the ultrafast nonlinear response of photo-excited plasmonic nano-structures. Our methodology could be applied to other imaging systems in which measuring nonlinearity is desirable, such as fluorescence and photoacoustic microscopy.

Lock-in detection of photoacoustic feedback signal for focusing through scattering media using wave-front shaping

Wave-front shaping techniques enable focusing and imaging through scattering media. Unfortunately, most approaches require invasive feedback inside or behind the sample, or use of spatial correlations (memory effect) limiting the application to specific types of samples. Recent approaches overcome these limitations by taking advantage of acoustic waves via the photoacoustic (PA) effect or via photon tagging. We present a fully analog signal processing lock-in scheme for PA detection to improve focusing through scattering media and to efficiently extract nonlinear photoacoustic signals towards wave-front optimization. Our implementation improves PA feedback performance in terms of SNR, speed, and resolution.