Rapid-scan coherent 2D fluorescence spectroscopy

Fisher information for smart sampling in time-domain spectroscopy

Time-domain spectroscopy encompasses a wide range of techniques, such as Fourier-transform infrared, pump-probe, Fourier-transform Raman, and two-dimensional electronic spectroscopies. These methods enable various applications, such as molecule characterization, excited state dynamics studies, or spectral classification. Typically, these techniques rarely use sampling schemes that exploit the prior knowledge scientists typically have before the actual experiment. Indeed, not all sampling coordinates carry the same amount of information, and a careful selection of the sampling points may notably affect the resulting performance. In this work, we rationalize, with examples, the various advantages of using an optimal sampling scheme tailored to the specific experimental characteristics and/or expected results. We show that using a sampling scheme optimizing the Fisher information minimizes the variance of the desired parameters. This can greatly improve, for example, spectral classifications and multidimensional spectroscopy. We demonstrate how smart sampling may reduce the acquisition time of an experiment by one to two orders of magnitude, while still providing a similar level of information.

Expanding the bandwidth of fluorescence-detected two-dimensional electronic spectroscopy using a broadband continuum probe pulse pair

We demonstrate fluorescence-detected two-dimensional electronic spectroscopy (F-2DES) with a broadband, continuum probe pulse pair in the pump-probe geometry. The approach combines a pump pulse pair generated by an acousto-optic pulse-shaper with precise control of the relative pump pulse phase and time delay with a broadband, continuum probe pulse pair created using the Translating Wedge-based Identical pulses eNcoding System (TWINS). The continuum probe expands the spectral range of the detection axis and lengthens the waiting times that can be accessed in comparison to implementations of F-2DES using a single pulse-shaper. We employ phase-cycling of the pump pulse pair and take advantage of the separation of signals in the frequency domain to isolate rephasing and non-rephasing signals and optimize the signal-to-noise ratio. As proof of principle, we demonstrate broadband F-2DES on a laser dye and bacteriochlorophyll a.

Multimode vibrational dynamics and orientational effects in fluorescence-encoded infrared spectroscopy. I. Response function theory

Fluorescence-encoded infrared (FEIR) spectroscopy is an emerging technique for performing vibrational spectroscopy in solution with detection sensitivity down to single molecules. FEIR experiments use ultrashort pulses to excite a fluorescent molecule's vibrational and electronic transitions in a sequential, time-resolved manner, and are therefore sensitive to intervening vibrational dynamics on the ground state, vibronic coupling, and the relative orientation of vibrational and electronic transition dipole moments. This series of papers presents a theoretical treatment of FEIR spectroscopy that describes these phenomena and examines their manifestation in experimental data. This first paper develops a nonlinear response function description of Fourier-transform FEIR experiments for a two-level electronic system coupled to multiple vibrations, which is then applied to interpret experimental measurements in the second paper [L. Whaley-Mayda et al., J. Chem. Phys. 159, 194202 (2023)]. Vibrational coherence between pairs of modes produce oscillatory features that interfere with the vibrations' population response in a manner dependent on the relative signs of their respective Franck-Condon wavefunction overlaps, leading to time-dependent distortions in FEIR spectra. The orientational response of population and coherence contributions are analyzed and the ability of polarization-dependent experiments to extract relative transition dipole angles is discussed. Overall, this work presents a framework for understanding the full spectroscopic information content of FEIR measurements to aid data interpretation and inform optimal experimental design.

Higher-Order Multidimensional and Pump-Probe Spectroscopies

Transient absorption and coherent two-dimensional spectroscopy are widely established methods for the investigation of ultrafast dynamics in quantum systems. Conventionally, they are interpreted in the framework of perturbation theory at the third order of interaction. Here, we discuss the potential of higher-(than-third-)order pump-probe and multidimensional spectroscopy to provide insight into excited multiparticle states and their dynamics. We focus on recent developments from our group. In particular, we demonstrate how phase cycling can be used in fluorescence-detected two-dimensional spectroscopy to isolate higher-order spectra that provide information about highly excited states such as the correlation of multiexciton states. We discuss coherently detected fifth-order 2D spectroscopy and its power to track exciton diffusion. Finally, we show how to extract higher-order signals even from ordinary pump-probe experiments, providing annihilation-free signals at high excitation densities and insight into multiexciton interactions.

Breaking Barriers in Ultrafast Spectroscopy and Imaging Using 100 kHz Amplified Yb-Laser Systems

ConspectusUltrafast spectroscopy and imaging have become tools utilized by a broad range of scientists involved in materials, energy, biological, and chemical sciences. Commercialization of ultrafast spectrometers including transient absorption spectrometers, vibrational sum frequency generation spectrometers, and even multidimensional spectrometers have put these advanced spectroscopy measurements into the hands of practitioners originally outside the field of ultrafast spectroscopy. There is now a technology shift occurring in ultrafast spectroscopy, made possible by new Yb-based lasers, that is opening exciting new experiments in the chemical and physical sciences. Amplified Yb-based lasers are not only more compact and efficient than their predecessors but also, most importantly, operate at many times the repetition rate with improved noise characteristics in comparison to the previous generation of Ti:sapphire amplifier technologies. Taken together, these attributes are enabling new experiments, generating improvements to long-standing techniques, and affording the transformation of spectroscopies to microscopies. This Account aims to show that the shift to 100 kHz lasers is a transformative step in nonlinear spectroscopy and imaging, much like the dramatic expansion that occurred with the commercialization of Ti:sapphire laser systems in the 1990s. The impact of this technology will be felt across a great swath of scientific communities. We first describe the technology landscape of amplified Yb-based laser systems used in conjunction with 100 kHz spectrometers operating with shot-to-shot pulse shaping and detection. We also identify the range of different parametric conversion and supercontinuum techniques which now provide a path to making pulses of light optimal for ultrafast spectroscopy. Second, we describe specific instances from our laboratories of how the amplified Yb-based light sources and spectrometers are transformative. For multiple probe time-resolved infrared and transient 2D IR spectroscopy, the gain in temporal span and signal-to-noise enables dynamical spectroscopy measurements from femtoseconds to seconds. These gains widen the applicability of time-resolved infrared techniques across a range of topics in photochemistry, photocatalysis, and photobiology as well as lower the technical barriers to implementation in a laboratory. For 2D visible spectroscopy and microscopy with white light, as well as 2D IR imaging, the high repetition rates of these new Yb-based light sources allow one to spatially map 2D spectra while maintaining high signal-to-noise in the data. To illustrate the gains, we provide examples of imaging applications in the study of photovoltaic materials and spectroelectrochemistry.

Time-Frequency Signatures of Electronic Coherence of Colloidal CdSe Quantum Dot Dimer Assemblies Probed at Room Temperature by Two-Dimensional Electronic Spectroscopy

Electronic coherence signatures can be directly identified in the time-frequency maps measured in two-dimensional electronic spectroscopy (2DES). Here, we demonstrate the theory and discuss the advantages of this approach via the detailed application to the fast-femtosecond beatings of a wide variety of electronic coherences in ensemble dimers of quantum dots (QDs), assembled from QDs of 3 nm in diameter, with 8% size dispersion in diameter. The observed and computed results can be consistently characterized directly in the time-frequency domain by probing the polarization in the 2DES setup. The experimental and computed time-frequency maps are found in very good agreement, and several electronic coherences are characterized at room temperature in solution, before the extensive dephasing due to the size dispersion begins. As compared to the frequency-frequency maps that are commonly used in 2DES, the time-frequency maps allow exploiting electronic coherences without additional post-processing and with fewer 2DES measurements. Towards quantum technology applications, we also report on the modeling of the time-frequency photocurrent response of these electronic coherences, which paves the way to integrating QD devices with classical architectures, thereby enhancing the quantum advantage of such technologies for parallel information processing at room temperature.

High-order pump-probe and high-order two-dimensional electronic spectroscopy on the example of squaraine oligomers

Time-resolved spectroscopy is commonly used to study diverse phenomena in chemistry, biology, and physics. Pump-probe experiments and coherent two-dimensional (2D) spectroscopy have resolved site-to-site energy transfer, visualized electronic couplings, and much more. In both techniques, the lowest-order signal, in a perturbative expansion of the polarization, is of third order in the electric field, which we call a one-quantum (1Q) signal because in 2D spectroscopy it oscillates in the coherence time with the excitation frequency. There is also a two-quantum (2Q) signal that oscillates in the coherence time at twice the fundamental frequency and is fifth order in the electric field. We demonstrate that the appearance of the 2Q signal guarantees that the 1Q signal is contaminated by non-negligible fifth-order interactions. We derive an analytical connection between an nQ signal and (2n + 1)th-order contaminations of an rQ (with r < n) signal by studying Feynman diagrams of all contributions. We demonstrate that by performing partial integrations along the excitation axis in 2D spectra, we can obtain clean rQ signals free of higher-order artifacts. We exemplify the technique using optical 2D spectroscopy on squaraine oligomers, showing clean extraction of the third-order signal. We further demonstrate the analytical connection with higher-order pump-probe spectroscopy and compare both techniques experimentally. Our approach demonstrates the full power of higher-order pump-probe and 2D spectroscopy to investigate multi-particle interactions in coupled systems.

Coherent Two-Dimensional and Broadband Electronic Spectroscopies

Over the past few decades, coherent broadband spectroscopy has been widely used to improve our understanding of ultrafast processes (e.g., photoinduced electron transfer, proton transfer, and proton-coupled electron transfer reactions) at femtosecond resolution. The advances in femtosecond laser technology along with the development of nonlinear multidimensional spectroscopy enabled further insights into ultrafast energy transfer and carrier relaxation processes in complex biological and material systems. New discoveries and interpretations have led to improved design principles for optimizing the photophysical properties of various artificial systems. In this review, we first provide a detailed theoretical framework of both coherent broadband and two-dimensional electronic spectroscopy (2DES). We then discuss a selection of experimental approaches and considerations of 2DES along with best practices for data processing and analysis. Finally, we review several examples where coherent broadband and 2DES were employed to reveal mechanisms of photoinitiated ultrafast processes in molecular, biological, and material systems. We end the review with a brief perspective on the future of the experimental techniques themselves and their potential to answer an even greater range of scientific questions.

Computational spectroscopy of complex systems

Numerous linear and non-linear spectroscopic techniques have been developed to elucidate structural and functional information of complex systems ranging from natural systems, such as proteins and light-harvesting systems, to synthetic systems, such as solar cell materials and light-emitting diodes. The obtained experimental data can be challenging to interpret due to the complexity and potential overlapping spectral signatures. Therefore, computational spectroscopy plays a crucial role in the interpretation and understanding of spectral observables of complex systems. Computational modeling of various spectroscopic techniques has seen significant developments in the past decade, when it comes to the systems that can be addressed, the size and complexity of the sample types, the accuracy of the methods, and the spectroscopic techniques that can be addressed. In this Perspective, I will review the computational spectroscopy methods that have been developed and applied for infrared and visible spectroscopies in the condensed phase. I will discuss some of the questions that this has allowed answering. Finally, I will discuss current and future challenges and how these may be addressed.

Fluorescence-Detected Pump-Probe Spectroscopy

We introduce a new approach to transient spectroscopy, fluorescence-detected pump-probe (F-PP) spectroscopy, that overcomes several limitations of traditional PP. F-PP suppresses excited-state absorption, provides background-free detection, removes artifacts resulting from pump-pulse scattering, from non-resonant solvent response, or from coherent pulse overlap, and allows unique extraction of excited-state dynamics under certain conditions. Despite incoherent detection, time resolution of F-PP is given by the duration of the laser pulses, independent of the fluorescence lifetime. We describe the working principle of F-PP and provide its theoretical description. Then we illustrate specific features of F-PP by direct comparison with PP, theoretically and experimentally. For this purpose, we investigate, with both techniques, a molecular squaraine heterodimer, core-shell CdSe/ZnS quantum dots, and fluorescent protein mCherry. F-PP is broadly applicable to chemical systems in various environments and in different spectral regimes.

Multidimensional electronic spectroscopy in high-definition-Combining spectral, temporal, and spatial resolutions

Over the past two decades, coherent multidimensional spectroscopies have been implemented across the terahertz, infrared, visible, and ultraviolet regions of the electromagnetic spectrum. A combination of coherent excitation of several resonances with few-cycle pulses, and spectral decongestion along multiple spectral dimensions, has enabled new insights into wide ranging molecular scale phenomena, such as energy and charge delocalization in natural and artificial light-harvesting systems, hydrogen bonding dynamics in monolayers, and strong light-matter couplings in Fabry-Pérot cavities. However, measurements on ensembles have implied signal averaging over relevant details, such as morphological and energetic inhomogeneity, which are not rephased by the Fourier transform. Recent extension of these spectroscopies to provide diffraction-limited spatial resolution, while maintaining temporal and spectral information, has been exciting and has paved a way to address several challenging questions by going beyond ensemble averaging. The aim of this Perspective is to discuss the technological developments that have eventually enabled spatially resolved multidimensional electronic spectroscopies and highlight some of the very recent findings already made possible by introducing spatial resolution in a powerful spectroscopic tool.

Photocurrent-Detected 2D Electronic Spectroscopy Reveals Ultrafast Hole Transfer in Operating PM6/Y6 Organic Solar Cells

The performance of nonfullerene-acceptor-(NFA)-based organic solar cells is rapidly approaching the efficiency of inorganic cells. The chemical versatility of NFAs extends the light-harvesting range to the infrared, while preserving a considerably high open-circuit-voltage, crucial to achieve power-conversion efficiencies >17%. Such low voltage losses in the charge separation process have been attributed to a low-driving-force and efficient exciton dissociation. Here, we address the nature of the subpicosecond dynamics of electron/hole transfer in PM6/Y6 solar cells. While previous reports focused on active layers only, we developed a photocurrent-detected two-dimensional spectroscopy to follow the charge transfer in fully operating devices. Our measurements reveal an efficient hole-transfer from the Y6-acceptor to the PM6-donor on the subpicosecond time scale. On the contrary, at the same time scale, no electron-transfer is seen from the donor to the acceptor. These findings, putting ultrafast spectroscopy in action on operating optoelectronic devices, provide insight for further enhancing NFA solar cell performance.

Frequency comb-based multidimensional coherent spectroscopy bridges the gap between fundamental science and cutting-edge technology

Optical multidimensional coherent spectroscopy (MDCS) has become a powerful and routine technique for studying optical properties of a wide range of materials. However, current implementations of MDCS have spectral resolution and acquisition speed limitations. In this Perspective, I describe how frequency comb technology can be used to overcome the limitations and also show the recent progress that has been made in this field.

Anisotropy in fifth-order exciton-exciton-interaction two-dimensional spectroscopy

Exciton-exciton-interaction two-dimensional (EEI2D) spectroscopy is a fifth-order variant of 2D electronic spectroscopy. It can be used to probe biexciton dynamics in molecular systems and to observe exciton diffusion in extended systems such as polymers or light-harvesting complexes. The exciton transport strongly depends on the geometrical and energetic landscape and its perturbations. These can be of both local character, such as molecular orientation and energetic disorder, and long-range character, such as polymer kinks and structural domains. In the present theoretical work, we investigate the anisotropy in EEI2D spectroscopy. We introduce a general approach for how to calculate the anisotropy by using the response-function formalism in an efficient way. In numerical simulations, using a Frenkel exciton model with Redfield-theory dynamics, we demonstrate how the measurement of anisotropy in EEI2D spectroscopy can be used to identify various geometrical effects on exciton transport in dimers and polymers. Investigating a molecular heterodimer as an example, we demonstrate the utility of anisotropy in EEI2D spectroscopy for disentangling dynamic localization and annihilation. We further calculate the annihilation in extended systems such as conjugated polymers. In a polymer, a change in the anisotropy provides a unique signature for exciton transport between differently oriented sections. We analyze three types of geometry variations in polymers: a kink, varying geometric and energetic disorder, and different geometric domains. Our findings underline that employing anisotropy in EEI2D spectroscopy provides a way to distinguish between different geometries and can be used to obtain a better understanding of long-range exciton transport.

Observing Multiexciton Correlations in Colloidal Semiconductor Quantum Dots via Multiple-Quantum Two-Dimensional Fluorescence Spectroscopy

Correlations between excitons, that is, electron-hole pairs, have a great impact on the optoelectronic properties of semiconductor quantum dots and thus are relevant for applications such as lasers and photovoltaics. Upon multiphoton excitation, these correlations lead to the formation of multiexciton states. It is challenging to observe these states spectroscopically, especially higher multiexciton states, because of their short lifetimes and nonradiative decay. Moreover, solvent contributions in experiments with coherent signal detection may complicate the analysis. Here we employ multiple-quantum two-dimensional (2D) fluorescence spectroscopy on colloidal CdSe_1-xS_x/ZnS alloyed core/shell quantum dots. We selectively map the electronic structure of multiexcitons and their correlations by using two- and three-quantum 2D spectroscopy, conducted in a simultaneous measurement. Our experiments reveal the characteristics of biexcitons and triexcitons such as transition dipole moments, binding energies, and correlated transition energy fluctuations. We determine the binding energies of the first six biexciton states by simulating the two-quantum 2D spectrum. By analyzing the line shape of the three-quantum 2D spectrum, we find strong correlations between biexciton and triexciton states. Our method contributes to a more comprehensive understanding of multiexcitonic species in quantum dots and other semiconductor nanostructures.

Two-dimensional spectroscopy beyond the perturbative limit: The influence of finite pulses and detection modes

Ultra-fast and multi-dimensional spectroscopy gives a powerful looking glass into the dynamics of molecular systems. In particular, two-dimensional electronic spectroscopy (2DES) provides a probe of coherence and the flow of energy within quantum systems, which is not possible with more conventional techniques. While heterodyne-detected (HD) 2DES is increasingly common, more recently fluorescence-detected (FD) 2DES offers new opportunities, including single-molecule experiments. However, in both techniques, it can be difficult to unambiguously identify the pathways that dominate the signal. Therefore, the use of numerically modeling of 2DES is vitally important, which, in turn, requires approximating the pulsing scheme to some degree. Here, we employ non-perturbative time evolution to investigate the effects of finite pulse width and amplitude on 2DES signals. In doing so, we identify key differences in the response of HD and FD detection schemes, as well as the regions of parameter space where the signal is obscured by unwanted artifacts in either technique. Mapping out parameter space in this way provides a guide to choosing experimental conditions and also shows in which limits the usual theoretical approximations work well and in which limits more sophisticated approaches are required.

Exciton-phonon coupling strength in single-layer MoSe2 at room temperature

Single-layer transition metal dichalcogenides are at the center of an ever increasing research effort both in terms of fundamental physics and applications. Exciton–phonon coupling plays a key role in determining the (opto)electronic properties of these materials. However, the exciton–phonon coupling strength has not been measured at room temperature. Here, we use two-dimensional micro-spectroscopy to determine exciton–phonon coupling of single-layer MoSe₂. We detect beating signals as a function of waiting time induced by the coupling between A excitons and A′₁ optical phonons. Analysis of beating maps combined with simulations provides the exciton–phonon coupling. We get a Huang–Rhys factor ~1, larger than in most other inorganic semiconductor nanostructures. Our technique offers a unique tool to measure exciton–phonon coupling also in other heterogeneous semiconducting systems, with a spatial resolution ~260 nm, and provides design-relevant parameters for the development of optoelectronic devices.

The exciton–phonon coupling (EXPC) affects the opto-electronic properties of atomically thin semiconductors. Here, the authors develop two-dimensional micro-spectroscopy to determine the EXPC of monolayer MoSe₂.

Coherent 2D electronic spectroscopy with complete characterization of excitation pulses during all scanning steps

Coherent two-dimensional (2D) electronic spectroscopy has become a standard tool in ultrafast science. Thus it is relevant to consider the accuracy of data considering both experimental imperfections and theoretical assumptions about idealized conditions. It is already known that chirped excitation pulses can affect 2D line shapes. In the present work, we demonstrate performance-efficient, automated characterization of the full electric field of each individual multipulse sequence employed during a 2D scanning procedure. Using Fourier-transform spectral interferometry, we analyze how the temporal intensity and phase profile varies from scanning step to scanning step and extract relevant pulse-sequence parameters. This takes into account both random and systematic variations during the scan that may be caused, for example, by femtosecond pulse-shaping artifacts. Using the characterized fields, we simulate and compare 2D spectra obtained with idealized and real shapes obtained from an LCD-based pulse shaper. Exemplarily, we consider fluorescence of a molecular dimer and multiphoton photoemission of a plasmonic nanoslit. The deviations from pulse-shaper artifacts in our specific case do not distort strongly the population-based multidimensional data. The characterization procedure is applicable to other pulses-shaping technologies or excitation geometries, including also pump-probe geometry with multipulse excitation and coherent detection, and allows for accurate consideration of realistic optical excitation fields at all inter-pulse time-delays.

Signatures of exciton dynamics and interaction in coherently and fluorescence-detected four- and six-wave-mixing two-dimensional electronic spectroscopy

Two-dimensional electronic spectroscopy (2DES) can be realized in increasing nonlinear orders of interaction with the electric field, bringing new information about single- and multi-particle properties and dynamics. Furthermore, signals can be detected both coherently (C-2DES) and by fluorescence (F-2DES), with fundamental and practical differences. We directly compare the simultaneous measurements of four- and six-wave mixing C-2DES and F-2DES on an excitonic heterodimer of squaraine molecules. Spectral features are described in increasing orders of nonlinearity by an explicit excitonic model. We demonstrate that the four-wave-mixing spectra are sensitive to one-exciton energies, their delocalization and dynamics, while the six-wave-mixing spectra include information on bi-exciton and higher excited states including the state energies, electronic coupling, and exciton-exciton annihilation. We focus on the possibility to extract the dynamics arising from exciton-exciton interaction directly from the six-wave-mixing spectra. To this end, in analogy to previously demonstrated fifth-order coherently detected exciton-exciton-interaction 2DES (EEI2D spectroscopy), we introduce a sixth-order fluorescence-detected EEI2D spectroscopy variant.

Correlating Nanoscale Optical Coherence Length and Microscale Topography in Organic Materials by Coherent Two-Dimensional Microspectroscopy

Many nanotechnology materials rely on a hierarchical structure ranging from the nanometer scale to the micrometer scale. Their interplay determines the nanoscale optical coherence length, which plays a key role in energy transport and radiative decay and, thus, the optoelectronic applications. However, it is challenging to detect optical coherence length in multiscale structures with existing methods. Techniques such as atomic force microscopy and transmission electron microscopy are not sensitive to optical coherence length. Linear absorption and fluorescence spectroscopy methods, on the other hand, were generally limited by inhomogeneous broadening, which often obstructs the determination of nanoscale coherence length. Here, we carry out coherent two-dimensional microspectroscopy to obtain a map of the local optical coherence length within a hierarchically structured molecular film. Interestingly, the nanoscale coherence length is found to correlate with microscale topography, suggesting a perspective for controlling structural coherence on molecular length scales by appropriate microscopic growth conditions.

Interplay between coherence-time undersampling and scattered light in two-dimensional electronic spectroscopy

Scanning pulse delays in multi-pulse non-linear optical spectroscopy experiments is a major contributor to lengthy data acquisition. Using large steps for the scan can significantly speed up the experiment. However, an improper choice of step length can cause distortions to the resulting spectra, especially if the light scattered on the sample is mixed into the signal. In this work, we identify potential sources of such distortions and suggest appropriate countermeasures to avoid them while maintaining a faster data collection.

Compressed Sensing for Reconstructing Coherent Multidimensional Spectra

We apply two sparse reconstruction techniques, the least absolute shrinkage and selection operator (LASSO) and the sparse exponential mode analysis (SEMA), to two-dimensional (2D) spectroscopy. The algorithms are first tested on model data, showing that both are able to reconstruct the spectra using only a fraction of the data required by the traditional Fourier-based estimator. Through the analysis of the sparsely sampled experimental fluorescence-detected 2D spectra of LH2 complexes, we conclude that both SEMA and LASSO can be used to significantly reduce the required data, still allowing one to reconstruct the multidimensional spectra. Of the two techniques, it is shown that SEMA offers preferable performance, providing more accurate estimation of the spectral line widths and their positions. Furthermore, SEMA allows for off-grid components, enabling the use of a much smaller dictionary than that of the LASSO, thereby improving both the performance and the lowering of the computational complexity for reconstructing coherent multidimensional spectra.

Multiple kinds of pesticide residue detection using fluorescence spectroscopy combined with partial least-squares models

Compared with high-performance liquid chromatography and mass spectroscopy, fluorescence spectroscopy has attracted considerable attention in the field of pesticide residue detection due to its practical advantages of providing rapid, simultaneous analysis and non-destructive detection. However, given that the concentration of pesticide residue detected via fluorescence spectroscopy is calculated in accordance with the Beer-Lambert law, this method can only detect samples containing a single kind of pesticide or several kinds of pesticides with completely different fluorescences. Multiple partial least-squares (PLS) models are introduced in this work to overcome this disadvantage and achieve the concentration of zhongshengmycin, paclobutrazol, boscalid, and pyridaben, whose fluorescences are overlapping. The R squares of the models for zhongshengmycin, paclobutrazol, boscalid, and pyridaben were 0.9942, 0.9912, 0.9913, and 0.9847, respectively. Results indicated that fluorescence spectroscopy combined with multiple PLS models can be used to detect multiple kinds of pesticides in the water.

Coherently and fluorescence-detected two-dimensional electronic spectroscopy: direct comparison on squaraine dimers

Optical two-dimensional electronic spectroscopy (2DES) is now widely utilized to study excitonic structure and dynamics of a broad range of systems, from molecules to solid state. Besides the traditional experimental implementation using phase matching and coherent signal field detection, action-based approaches that detect incoherent signals such as fluorescence have been gaining popularity in recent years. While incoherent detection extends the range of applicability of 2DES, the observed spectra are not equivalent to the coherently detected ones. This raises questions about their interpretation and the sensitivity of the technique. Here we directly compare, both experimentally and theoretically, four-wave mixing coherently and fluorescence-detected 2DES of a series of squaraine dimers of increasing electronic coupling. All experiments are qualitatively well reproduced by a Frenkel exciton model with secular Redfield theory description of excitation dynamics. We contrast the spectral features and the sensitivities of both techniques with respect to exciton energies, delocalization, coherent and dissipative dynamics, and exciton-exciton annihilation. Discussing the fundamental and practical differences, we demonstrate the degree of complementarity of the techniques.

Multicolor Quantum Control for Suppressing Ground State Coherences in Two-Dimensional Electronic Spectroscopy

The measured multidimensional spectral response of different light harvesting complexes exhibits oscillatory features which suggest an underlying coherent energy transfer. However, making this inference rigorous is challenging due to the difficulty of isolating excited state coherences in highly congested spectra. In this work, we provide a coherent control scheme that suppresses ground state coherences, thus making rephasing spectra dominated by excited state coherences. We provide a benchmark for the scheme using a model dimeric system and numerically exact methods to analyze the spectral response. We argue that combining temporal and spectral control methods can facilitate a second generation of experiments that are tailored to extract desired information and thus significantly advance our understanding of complex open many-body structure and dynamics.

Rapid multiple-quantum three-dimensional fluorescence spectroscopy disentangles quantum pathways

Coherent two-dimensional spectroscopy is a powerful tool for probing ultrafast quantum dynamics in complex systems. Several variants offer different types of information but typically require distinct beam geometries. Here we introduce population-based three-dimensional (3D) electronic spectroscopy and demonstrate the extraction of all fourth- and multiple sixth-order nonlinear signal contributions by employing 125-fold (1⨯5⨯5⨯5) phase cycling of a four-pulse sequence. Utilizing fluorescence detection and shot-to-shot pulse shaping in single-beam geometry, we obtain various 3D spectra of the dianion of TIPS-tetraazapentacene, a fluorophore with limited stability at ambient conditions. From this, we recover previously unknown characteristics of its electronic two-photon state. Rephasing and nonrephasing sixth-order contributions are measured without additional phasing that hampered previous attempts using noncollinear geometries. We systematically resolve all nonlinear signals from the same dataset that can be acquired in 8 min. The approach is generalizable to other incoherent observables such as external photoelectrons, photocurrents, or photoions.

Stable interferometric platform for phase modulation of seeded free-electron lasers

We present a compact phase modulation setup designed for high laser intensities sufficient to drive highly nonlinear processes, such as high-gain harmonic generation in seeded free-electron lasers. This paves the way for all-extreme-ultravioloet coherent nonlinear spectroscopy. The high linearity, phase stability, and sensitivity of the setup are demonstrated by probing the quantum interference of electronic wave packets in the deep ultraviolet region (268 nm) combined with photoion time-of-flight mass spectrometry.

Simulating Fluorescence-Detected Two-Dimensional Electronic Spectroscopy of Multichromophoric Systems

We present a theory for modeling fluorescence-detected two-dimensional electronic spectroscopy of multichromophoric systems. The theory is tested by comparison of the predicted spectra of the light-harvesting complex LH2 with experimental data. A qualitative explanation of the strong cross-peaks as compared to conventional two-dimensional electronic spectra is given. The strong cross-peaks are attributed to the clean ground-state signal that is revealed when the annihilation of exciton pairs created on the same LH2 complex cancels oppositely signed signals from the doubly excited state. This annihilation process occurs much faster than the nonradiative relaxation. Furthermore, the line shape difference is attributed to slow dynamics, exciton delocalization within the bands, and intraband exciton-exciton annihilation. This is in line with existing theories presented for model systems. We further propose the use of time-resolved fluorescence-detected two-dimensional spectroscopy to study state-resolved exciton-exciton annihilation.

Spatially resolved coherent 2D fluorescence spectroscopy within a high-NA microscope

We have developed coherent two-dimensional (2D) fluorescence micro-spectroscopy which probes the nonlinear optical response at surfaces via fluorescence detection with sub-micron spatial resolution. This enables the investigation of microscopic variations in laterally heterogeneous film samples which are of interests for sub-wavelength opto-electronic devices.

Fluorescence-detected two-quantum and one-quantum-two-quantum 2D electronic spectros-copy of Rhodamine 700

We demonstrate the simultaneous acquisition of three fourth-order nonlinear signal contributions using a shot-to-shot-modulating pulse shaper and fluorescence detection. Beside the 1Q photon echo, two different species of two-quantum contributions can be isolated without any background via phase cycling.

Spatially-resolved fluorescence-detected two-dimensional electronic spectroscopy probes varying excitonic structure in photosynthetic bacteria

Conventional implementations of two-dimensional electronic spectroscopy typically spatially average over ~10¹⁰ chromophores spread over ~10⁴ micron square area, limiting their ability to characterize spatially heterogeneous samples. Here we present a variation of two-dimensional electronic spectroscopy that is capable of mapping spatially varying differences in excitonic structure, with sensitivity orders of magnitude better than conventional spatially-averaged electronic spectroscopies. The approach performs fluorescence-detection-based fully collinear two-dimensional electronic spectroscopy in a microscope, combining femtosecond time-resolution, sub-micron spatial resolution, and the sensitivity of fluorescence detection. We demonstrate the approach on a mixture of photosynthetic bacteria that are known to exhibit variations in electronic structure with growth conditions. Spatial variations in the constitution of mixed bacterial colonies manifests as spatially varying peak intensities in the measured two-dimensional contour maps, which exhibit distinct diagonal and cross-peaks that reflect differences in the excitonic structure of the bacterial proteins.

2D electronic spectroscopy enables a spatially-averaged view of the electronic structure of a heterogeneous system. Here, the authors extend it to sub-micron resolution and ~10⁶ times better sensitivity, to resolve spatially varying excitonic structure in a heterogeneous mixture of photosynthetic cells.

Signatures of Exciton Delocalization and Exciton-Exciton Annihilation in Fluorescence-Detected Two-Dimensional Coherent Spectroscopy

Incoherently detected coherent multidimensional spectroscopy is rapidly gaining popularity, promising a different application range and sensitivity than its traditional counterpart. While measuring the same response, the two methods are not equivalent. We present calculations of the fluorescence-detected coherent two-dimensional (F-2DES) spectra of a molecular heterodimer. We compare how the F-2DES technique differs from standard coherently detected two-dimensional (2DES) spectroscopy in measuring exciton delocalization. We analyze which processes contribute to cross-peaks in the zero-waiting-time spectra obtained by the two methods. Strictly on the basis of time-dependent perturbation theory, we study how in both methods the varying degree of cancellation between perturbative contributions gives rise to cross-peaks and we identify exciton annihilation and exciton relaxation contributions to the cross-peak in the zero-waiting-time F-2DES. We propose that time-gated fluorescence detection can be used to isolate the annihilation contribution to F-2DES both to retrieve information equivalent to 2DES spectroscopy and to study the annihilation contribution itself.

Photometrics of ultrafast and fast broadband electronic transient absorption spectroscopy: State of the art

The physical limits of the photometric resolution in broadband electronic transient absorption spectroscopy are discussed together with solutions for how to reach these limits in practice. In the first part, quantitative expressions for the noise contributions to the transient absorption signal are derived and experimentally tested. Experimental approaches described in the literature are discussed and compared on this basis. Guide-lines for designing a setup are established. In the second part, a method for obtaining nearly shot-noise limited kinetics with photometric resolution of the order of 100 μOD in overall measurement times of a few minutes from femtosecond to microsecond time scale is presented. The results are discussed in view of other experiments of step-scan type which are subject to a background or to correlated noise. Finally, detailed information is provided on how to obtain transient absorption spectra where counting statistics are the sole source of noise. A method for how to suppress outliers without introducing bias is discussed. An application example is given to demonstrate the achievable signal-to-noise level and the fast acquisition time.

Strongly coupled bacteriochlorin dyad studied using phase-modulated fluorescence-detected two-dimensional electronic spectroscopy

Fluorescence-detected two-dimensional electronic spectroscopy (F-2DES) projects the third-order non-linear polarization in a system as an excited electronic state population which is incoherently detected as fluorescence. Multiple variants of F-2DES have been developed. Here, we report phase-modulated F-2DES measurements on a strongly coupled symmetric bacteriochlorin dyad, a relevant 'toy' model for photosynthetic energy and charge transfer. Coherence map analysis shows that the strongest frequency observed in the dyad is well-separated from the excited state electronic energy gap, and is consistent with a vibrational frequency readily observed in bacteriochlorin monomers. Kinetic rate maps show a picosecond relaxation timescale between the excited states of the dyad. To our knowledge this is the first demonstration of coherence and kinetic analysis using the phase-modulation approach to F-2DES.

Coherent two-dimensional electronic mass spectrometry

Coherent two-dimensional (2D) optical spectroscopy has revolutionized our ability to probe many types of couplings and ultrafast dynamics in complex quantum systems. The dynamics and function of any quantum system strongly depend on couplings to the environment. Thus, studying coherent interactions for different environments remains a topic of tremendous interest. Here we introduce coherent 2D electronic mass spectrometry that allows 2D measurements on effusive molecular beams and thus on quantum systems with minimum system–bath interaction and employ this to identify the major ionization pathway of 3d Rydberg states in NO₂. Furthermore, we present 2D spectra of multiphoton ionization, disclosing distinct differences in the nonlinear response functions leading to the ionization products. We also realize the equivalent of spectrally resolved transient-absorption measurements without the necessity for acquiring weak absorption changes. Using time-of-flight detection introduces cations as an observable, enabling the 2D spectroscopic study on isolated systems of photophysical and photochemical reactions.

Multidimensional spectroscopy is a powerful tool in exploring photo-induced dynamics and electron coupling processes in molecules. Here the authors demonstrate coherent two-dimensional electronic mass spectrometry on molecular beams and its application to photoionization studies of the NO₂ molecule.

Fluorescence-Detected Two-Quantum and One-Quantum-Two-Quantum 2D Electronic Spectroscopy

We demonstrate two-quantum (2Q) coherent two-dimensional (2D) electronic spectroscopy using a shot-to-shot-modulated pulse shaper and fluorescence detection. Broadband collinear excitation is realized with the supercontinuum output of an argon-filled hollow-core fiber, enabling us to excite multiple transitions simultaneously in the visible range. The 2Q contribution is extracted via a three-pulse sequence with 16-fold phase cycling and simulated employing cresyl violet as a model system. Furthermore, we report the first experimental realization of one-quantum-two-quantum (1Q-2Q) 2D spectroscopy, offering less congested spectra as compared with the 2Q implementation. We avoid scattering artifacts and nonresonant solvent contributions by using fluorescence as the observable. This allows us to extract quantitative information about doubly excited states that agree with literature expectations. The high sensitivity and background-free nature of fluorescence detection allow for a general applicability of this method to many other systems.

Coherent two-dimensional fluorescence micro-spectroscopy

We have developed coherent two-dimensional (2D) fluorescence micro-spectroscopy which probes the nonlinear optical response at surfaces via fluorescence detection with sub-micron spatial resolution. This enables the investigation of microscopic variations in heterogeneous systems. An LCD-based pulse shaper in 4f geometry is used to create collinear trains of 12-fs visible/NIR laser pulses in the focus of an NA = 1.4 immersion-oil microscope objective. We demonstrate the capabilities of the new method by presenting 2D spectra, analyzed via phase cycling, as a function of position of selected sub-micron regions from a laterally nanostructured polycrystalline thin film of fluorinated zinc phthalocyanine (F₁₆ZnPc).

Phase-synchronous undersampling in nonlinear spectroscopy

We introduce the concept of phase-synchronous undersampling in nonlinear spectroscopy. The respective theory is presented and validated experimentally in a phase-modulated quantum beat experiment by sampling high phase modulation frequencies with low laser repetition rates. The advantage of undersampling in terms of signal quality and reduced acquisition time is demonstrated, and breakdown conditions are identified. The presented method is particularly beneficial for experimental setups with limited signal/detection rates.

Recent advances in multidimensional ultrafast spectroscopy

Multidimensional ultrafast spectroscopies are one of the premier tools to investigate condensed phase dynamics of biological, chemical and functional nanomaterial systems. As they reach maturity, the variety of frequency domains that can be explored has vastly increased, with experimental techniques capable of correlating excitation and emission frequencies from the terahertz through to the ultraviolet. Some of the most recent innovations also include extreme cross-peak spectroscopies that directly correlate the dynamics of electronic and vibrational states. This review article summarizes the key technological advances that have permitted these recent advances, and the insights gained from new multidimensional spectroscopic probes.

Multi-heterodyne two dimensional coherent spectroscopy using frequency combs

Optical multi-dimensional coherent spectroscopy is a powerful technique for studying the structure, properties and ultrafast dynamics of atoms, molecules, semiconductor materials and complex systems. Current implementations of multi-dimensional coherent spectroscopy have long acquisition times and/or limited spectral resolution. In addition, most of the techniques utilize complex geometries or phase cycling schemes to isolate non-linear signals. We demonstrate a novel approach of using frequency combs to perform rapid, high resolution and background free multi-dimensional coherent spectroscopy of semiconductor materials. Our approach is inspired by dual-comb spectroscopy, which has been proven to be a versatile tool for obtaining one dimensional absorption spectra with high resolution in a short acquisition time. We demonstrate the method using a GaAs multi-quantum well sample.