Nanoparticle-doped electrospun fiber random lasers with spatially extended light modes

Self-Assembled Biophotonic Lasing Network Driven by Amyloid Fibrils in Microcavities

Self-assembled biological structures have played a significant role in many living systems for its functionality and distinctiveness. Here, we experimentally demonstrate that the random dynamic behavior of strong light-matter interactions in complex biological structures can provide hidden information on optical coupling in a network. The concept of biophotonic lasing network is therefore introduced, where a self-assembled human amyloid fibril network was confined in a Fabry-Perot optical cavity. Distinctive lasing patterns were discovered from self-assembled amyloids with different structural dimensions (0D, 1D, 2D, and 3D) confined in a microcavity. Network laser emission exhibiting evidence of light coupling at different wavelengths and locations was spectrally resolved. Dynamic changes of lasing patterns can therefore be interpreted into a graph to reveal the optical correlation in biophotonic networks. Our findings indicate that each graph represents the highly unclonable features of a self-assembled network which can sensitively respond to environmental stimulus. This study offers the potential for studying dynamic biological networks through amplified interactions, shedding light on the development of biologically controlled photonic devices, biosensing, and information encryption.

UV random laser emission from flexible ZnO-Ag-enriched electrospun cellulose acetate fiber matrix

We report an alternative random laser (RL) architecture based on a flexible and ZnO-enriched cellulose acetate (CA) fiber matrix prepared by electrospinning. The electrospun fibers, mechanically reinforced by polyethylene oxide and impregnated with zinc oxide powder, were applied as an adsorbent surface to incorporate plasmonic centers (silver nanoprisms). The resulting structures - prepared in the absence (CA-ZnO) and in the presence of silver nanoparticles (CA-ZnO-Ag) - were developed to support light excitation, guiding and scattering prototypes of a RL. Both materials were excited by a pulsed (5 Hz, 5 ns) source at 355 nm and their fluorescence emission monitored at 387 nm. The results suggest that the addition of silver nanoprisms to the ZnO- enriched fiber matrix allows large improvement of the RL performance due to the plasmon resonance of the silver nanoprisms, with ~80% reduction in threshold energy. Besides the intensity and spectral analysis, the RL characterization included its spectral and intensity angular dependences. Bending the flexible RL did not affect the spectral characteristics of the device. No degradation was observed in the random laser emission for more than 10,000 shots of the pump laser.

Random Lasing Engineering in Poly-(9-9dioctylfluorene) Active Waveguides Deposited on Wrinkles Corrugated Surfaces

This paper investigates the correlation between the random lasing properties of organic waveguides made by poly-(9-9dioctylfluorene) (PFO) thin films and the morphology of wrinkled corrugated substrates. The capability to individually control the wrinkle wavelength, shape, and height allows us to separately investigate their role on the sample emission properties. We demonstrate that the main parameter determining the presence of coherent random lasing is the substrate roughness and that, contrary to what could be qualitatively expected, as the roughness increases, coherent random lasing is progressively reduced. Coherent random lasing is observed only for a substrate roughness below 33 nm, while higher roughness leads to amplified spontaneous emission (up to 70 nm) or to the absence of light amplification in the film (above 70 nm). We demonstrate that this result is due to a progressive reduction of the light amplification efficiency in the PFO film, evidencing that coherent random lasing can be obtained only with a right interplay between light amplification and scattering. Besides clarifying the basic aspects of random lasing in organic waveguides, our work opens the way to the realization of organic random lasers with predictable emission properties, thanks to the high control level of the scattering properties of the wrinkled corrugated surfaces.

A random laser based on electrospun polymeric composite nanofibers with dual-size distribution

Electrospun fiber-based random lasers are environment-friendly flexible systems in which waveguiding/scattering processes provided by their structure with a broad distribution of diameters are essential elements to generate a suitable lasing mechanism. In this work, we prepared electrospun fibers with dual-size diameter distribution (above and below the critical value for waveguiding), allowing that both optical processes can be established in the polymer network. As a result, random laser emission was observed for the electrospun fibers presenting dual-size diameters with rhodamine 6G as the gain medium, characterizing the combination of waveguiding/scattering as an adequate condition for development of organic nanofibrous random lasers. Degradation assays were also performed in order to evaluate the prolonged use of such random laser systems.

White-Light Emission of Dye-Doped Polymer Submicronic Fibers Produced by Electrospinning

Lighting and display technologies are evolving at tremendous rates nowadays; new device architectures based on new, microscopic building blocks are being developed. Besides high light-emission efficiencies, qualities including low cost, low environmental impact, flexibility, or lightweightness are sought for developing new types of devices. Electrospun polymer fibers represent an interesting type of such microscopic structures that can be employed in developing new functionalities. White-light-emitting fiber mats were prepared by the electrospinning of different dye-doped polymer solutions. Two approaches were used in order to obtain white-light emissions: the overlapping of single-dye-doped electrospun fiber mats, and the electrospinning of mixtures of different ratios of single-dye-doped polymer solutions. Scanning electron microscopy (SEM) was used to investigate the morphologies of the electrospun fibers with diameters ranging between 300 nm and 1 µm. Optical absorption and photoluminescence (PL) were evaluated for single-dye-doped submicronic fiber mats, for overlapping mats, and for fiber mats obtained from different compositions of mixtures. Depending on the ratios of the mixtures of different dyes, the luminance was balanced between blue and red emissions. Commission Internationale de L'Eclairage (CIE) measurements depict this fine-tuning of the colors' intensities, and the right composition for white-light emission of the submicronic fiber mats was found.