Long-haul coherent communications using microresonator-based frequency combs

Supercontinuum in integrated photonics: generation, applications, challenges, and perspectives

Frequency conversion in nonlinear materials is an extremely useful solution to the generation of new optical frequencies. Often, it is the only viable solution to realize light sources highly relevant for applications in science and industry. In particular, supercontinuum generation in waveguides, defined as the extreme spectral broadening of an input pulsed laser light, is a powerful technique to bridge distant spectral regions based on single-pass geometry, without requiring additional seed lasers or temporal synchronization. Owing to the influence of dispersion on the nonlinear broadening physics, supercontinuum generation had its breakthrough with the advent of photonic crystal fibers, which permitted an advanced control of light confinement, thereby greatly improving our understanding of the underlying phenomena responsible for supercontinuum generation. More recently, maturing in fabrication of photonic integrated waveguides has resulted in access to supercontinuum generation platforms benefiting from precise lithographic control of dispersion, high yield, compact footprint, and improved power consumption. This Review aims to present a comprehensive overview of supercontinuum generation in chip-based platforms, from underlying physics mechanisms up to the most recent and significant demonstrations. The diversity of integrated material platforms, as well as specific features of waveguides, is opening new opportunities, as will be discussed here.

Spatially resolved multimode excitation for smooth supercontinuum generation in a SiN waveguide

We propose a method of supercontinuum light generation enhanced by multimode excitation in a precisely dispersion-engineered deuterated SiN (SiN:D) waveguide. Although a regularly designed SiN-based nonlinear optical waveguide exhibits anomalous dispersion with the fundamental and first-order multimode operation, the center-symmetric light pumping at the input edge has so far inhibited the full potential of the nonlinearity of SiN-based materials. On the basis of numerical analysis and simulation for the SiN:D waveguide, we intentionally applied spatial position offsets to excite the fundamental and higher-order modes to realize bandwidth broadening with flatness. Using this method, we achieved an SNR improvement of up to 18 dB at a wavelength of 0.6 µm with an offset of about 1 µm in the Y-axis direction and found that the contribution was related to the presence of dispersive waves due to the excitation of TE₁₀, and TE₀₁ modes.

Dissipative Kerr soliton microcombs for FEC-free optical communications over 100 channels

The demand for high-speed and highly efficient optical communication techniques has been rapidly growing due to the ever-increasing volume of data traffic. As well as the digital coherent communication used for core and metro networks, intensity modulation and direct detection (IM-DD) are still promising schemes in intra/inter data centers thanks to their low latency, high reliability, and good cost performance. In this work, we study a microresonator-based frequency comb as a potential light source for future IM-DD optical systems where applications may include replacing individual stabilized lasers with a continuous laser driven microresonator. Regarding comb line powers and spectral intervals, we compare a modulation instability comb and a soliton microcomb and provide a quantitative analysis with regard to telecom applications. Our experimental demonstration achieved a forward error correction (FEC) free operation of bit-error rate (BER) <10^-9 with a 1.45 Tbps capacity using a total of 145 lines over the entire C-band and revealed the possibility of soliton microcomb-based ultra-dense wavelength division multiplexing (WDM) with a simple, cost-effective IM-DD scheme, with a view to future practical use in data centers.

Temporal dissipative structures in optical Kerr resonators with transient loss fluctuation

Dissipative structures are the result of spontaneous symmetry breaking in a dynamic open system, which is induced by either the nonlinear effect or loss fluctuations. While optical temporal dissipative solitons in nonlinear Kerr cavities has been widely studied, their operation is limited to the red-detuned regime. Here, we demonstrate an emergent dissipative soliton state in optical nonlinear cavities in the presence of loss fluctuations, which is accessible by self-evolution of the system on resonance. Based on a modified dissipative and Kerr-nonlinear cavity model, we numerically investigate the effect of the loss modulation on the intracavity field pattern, and in transmission observe a single and bright soliton pulse state at the zero detuning. The effect of the optical saturable absorption is also numerically investigated, which is recognized as an effective approach to the transient loss fluctuation in the cavity. The estimated power efficiency of the resonant bright soliton can be higher than that of the conventional dissipative Kerr soliton, which is determined by the loss modulation depth and the pump intensity. The self-starting soliton state on system's resonance is potentially of wide interest, which physically contributes to insights of the temporal structure formation in dissipative cavities. On application aspect, it may constitute a way to the generation of ultra-fast soliton pulse trains as well as the generation of soliton micro-combs.

Chirped dissipative solitons in driven optical resonators

Solitons are self-sustaining particle-like wave packets found throughout nature. Optical systems such as optical fibers and mode-locked lasers are relatively simple, are technologically important, and continue to play a major role in our understanding of the rich nonlinear dynamics of solitons. Here we present theoretical and experimental observations of a new class of optical soliton characterized by pulses with large and positive chirp in normal dispersion resonators with strong spectral filtering. Numerical simulations reveal several stable waveforms including dissipative solitons characterized by large frequency chirp. In experiments with fiber cavities driven with nanosecond pulses, chirped dissipative solitons matching predictions are observed. Remarkably, chirped pulses remain stable in low quality-factor resonators despite large dissipation, which enables new opportunities for nonlinear pattern formation. By extending pulse generation to normal dispersion systems and supporting higher pulse energies, chirped dissipative solitons will enable ultrashort pulse and frequency comb sources that are simpler and more effective for spectroscopy, communications, and metrology. Scaling laws are derived to provide simple design guidelines for generating chirped dissipative solitons in microresonator, fiber resonator, and bulk enhancement cavity platforms.

Frequency-tuning dual-comb spectroscopy using silicon Mach-Zehnder modulators

Dual-comb spectroscopy using a silicon Mach-Zehnder modulator is reported for the first time. First, the properties of frequency combs generated by silicon modulators are assessed in terms of tunability, coherence, and number of lines. Then, taking advantage of the frequency agility of electro-optical frequency combs, a new technique for fine resolution absorption spectroscopy is proposed, named frequency-tuning dual-comb spectroscopy, which combines dual-comb spectroscopy and frequency spacing tunability to measure optical spectra with detection at a unique RF frequency. As a proof of concept, a 24 GHz optical bandwidth is scanned with a 1 GHz resolution.

Reconfigurable optical generation of nine Nyquist WDM channels with sinc-shaped temporal pulse trains using a single microresonator-based Kerr frequency comb

Sinc-shaped temporal pulse trains have a spectrally efficient, rectangular Nyquist spectrum. We demonstrate the simultaneous and reconfigurable optical generation of multiple Nyquist-shaped wavelength-division-multiplexed (WDM) channels having temporal sinc-shaped pulse trains as data carriers. The channels are generated through the insertion of coherent lines using cascaded continuous-wave amplitude modulation around the spectral lines of a microresonator-based Kerr optical frequency comb. For each of nine Kerr frequency comb lines, we insert sub-groups of uniform and coherent lines to generate nine WDM channels. The deviations from ideal Nyquist pulses for the nine channels at repetition rates of 6 and 2 GHz are between 4.2%-6.1% and 2%-4.5%, respectively. Each WDM channel is modulated with on-off keying (OOK) at 6 Gbit/s. In addition, we show the reconfigurability of this method by varying the number of WDM channels, the generated sinc-shaped pulse train repetition rates, the duration, and the number of zero-crossings.

Raman-Kerr frequency combs in Zr-doped silica hybrid microresonators

Resonant cavity-enhanced Kerr frequency combs have been demonstrated using a range of cavity materials. Regardless of cavity type, one fundamental challenge is achieving low or flat dispersion while maintaining high-efficiency four-wave mixing (FWM). Here we demonstrate a Raman-Kerr frequency comb using a Zr-doped silica hybrid toroidal microcavity. The Zr-doped layer both flattens the dispersion and increases the stimulated Raman scattering efficiency. This enhancement enables the generation of FWM around both the Stokes and anti-Stokes Raman scattering emissions. As a result, the Raman-Kerr frequency comb spans more than 300 nm in the near-IR region with less than 5.2 mW of input power.

Coherent multi-heterodyne spectroscopy using acousto-optic frequency combs

We propose and characterize experimentally a new source of optical frequency combs for performing multi-heterodyne spectrometry. This comb modality is based on a frequency-shifting loop seeded with a continuous-wave (CW) monochromatic laser. The comb lines are generated by successive passes of the CW laser through an acousto-optic frequency shifter. We report the generation of frequency combs with more than 1500 mutually coherent lines, without resorting to non-linear broadening phenomena or external electronic modulation. The comb line spacing is easily reconfigurable from tens of MHz down to the kHz region. We first use a single acousto-optic frequency comb to conduct self-heterodyne interferometry with a high frequency resolution (500 kHz). By increasing the line spacing to 80 MHz, we demonstrate molecular spectroscopy on the sub-millisecond time scale. In order to reduce the detection bandwidth, we subsequently implement an acousto-optic dual-comb spectrometer with the aid of two mutually coherent frequency shifting loops. In each architecture, the potentiality of acousto-optic frequency combs for spectroscopy is validated by spectral measurements of hydrogen cyanide in the near-infrared region.

Terabit optical OFDM superchannel transmission via coherent carriers of a hybrid chip-scale soliton frequency comb

We demonstrate seamless channel multiplexing and high bitrate superchannel transmission of coherent optical orthogonal frequency division multiplexing (CO-OFDM) data signals utilizing a dissipative Kerr soliton (DKS) frequency comb generated in an on-chip microcavity. Aided by comb line multiplication through Nyquist pulse modulation, the high stability and mutual coherence among mode-locked Kerr comb lines are exploited for the first time, to the best of our knowledge, to eliminate the guard intervals between communication channels and achieve full spectral density bandwidth utilization. Spectral efficiency as high as 2.625 bit/Hz/s is obtained for 180 CO-OFDM bands encoded with 12.75 Gbaud 8-QAM data, adding to the total bitrate of 6.885 Tb/s within a 2.295 THz frequency comb bandwidth. This Letter confirms that high coherence is the key superiority of Kerr soliton frequency combs over independent laser diodes, as a multi-spectral coherent laser source for high-bandwidth high-spectral-density transmission networks.

High-order coherent communications using mode-locked dark-pulse Kerr combs from microresonators

Microresonator frequency combs harness the nonlinear Kerr effect in an integrated optical cavity to generate a multitude of phase-locked frequency lines. The line spacing can reach values in the order of 100 GHz, making it an attractive multi-wavelength light source for applications in fiber-optic communications. Depending on the dispersion of the microresonator, different physical dynamics have been observed. A recently discovered comb state corresponds to the formation of mode-locked dark pulses in a normal-dispersion microcavity. Such dark-pulse combs are particularly compelling for advanced coherent communications since they display unusually high power-conversion efficiency. Here, we report the first coherent-transmission experiments using 64-quadrature amplitude modulation encoded onto the frequency lines of a dark-pulse comb. The high conversion efficiency of the comb enables transmitted optical signal-to-noise ratios above 33 dB, while maintaining a laser pump power level compatible with state-of-the-art hybrid silicon lasers.

Dark-pulse combs may be useful for coherent communications since they display high power conversion efficiency. Here, the authors report the first demonstration of coherent wavelength division multiplexing using dark pulse microresonator combs high signal-to-noise while maintaining a low on-chip pump power.