1
|
Asl AB, Ahmadi H, Rostami A. A novel plasmonic metal-semiconductor-insulator-metal (MSIM) color sensor compatible with CMOS technology. Sci Rep 2023; 13:14029. [PMID: 37640928 PMCID: PMC10462665 DOI: 10.1038/s41598-023-41346-4] [Citation(s) in RCA: 0] [Impact Index Per Article: 0] [Reference Citation Analysis] [Abstract] [Key Words] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Received: 06/29/2023] [Accepted: 08/24/2023] [Indexed: 08/31/2023] Open
Abstract
Color detection is one of the top interests in both biological and industrial applications. Specifically, the Determination of the light wave characteristics is vital in photonic technology. One of the features in the color sense that should be found out is its wavelength or color. In this work, we propose a structure that can be used to detect RGB colors separately in an efficient way. The proposed detector consists of the plasmonic filter sensing desired wavelength (red, green, and blue) and the PN diode to convert the received photons to the electrical current. At the input intensity of 1 mW × cm-2, the current density for blue, green, and red colors are 27, 35, and 48 µA × cm-2, respectively. It is shown that the intensities needed to obtain the current densities of 0.1 µA × cm-2 are 3.94, 2.98, and 2.25 µW × cm-2 for the blue, green, and red spectra respectively. It should mention that by using high-precision photodetector structures such as PIN diode, the minimum detectable level can be decreased. Simple adjusting for desired wavelength and linear operation for different input intensities are the characteristics of the designed structure. This detector is compatible with CMOS technology and can be easily utilized in numerous applications, such as charge-coupled devices, displays, and cameras.
Collapse
Affiliation(s)
- A Beheshti Asl
- Photonics and Nanocrystals Research Lab (PNRL), Faculty of Electrical and Computer Engineering, University of Tabriz, Tabriz, Iran
| | - H Ahmadi
- Photonics and Nanocrystals Research Lab (PNRL), Faculty of Electrical and Computer Engineering, University of Tabriz, Tabriz, Iran
- SP-EPT Lab., ASEPE Company, Industrial Park of Advanced Technologies, Tabriz, Iran
| | - A Rostami
- Photonics and Nanocrystals Research Lab (PNRL), Faculty of Electrical and Computer Engineering, University of Tabriz, Tabriz, Iran.
- SP-EPT Lab., ASEPE Company, Industrial Park of Advanced Technologies, Tabriz, Iran.
| |
Collapse
|
2
|
Wenger T, Muller RE, Wilson DW, Soibel A. Mid-infrared plasmonic filter arrays using nanoholes in gold and silver films. OPTICS LETTERS 2023; 48:3925-3928. [PMID: 37527084 DOI: 10.1364/ol.492934] [Citation(s) in RCA: 0] [Impact Index Per Article: 0] [Reference Citation Analysis] [Abstract] [Track Full Text] [Subscribe] [Scholar Register] [Received: 04/17/2023] [Accepted: 07/06/2023] [Indexed: 08/03/2023]
Abstract
Plasmonic filters based on subwavelength nanohole arrays are an attractive solution for creating arrays of filters with varying passbands in a single lithography step. In this work, we have developed a fabrication method which allows fabrication of nanohole arrays in silver by use of a thin layer of aluminum oxide, which serves the dual purpose of both capping layer and hardmask for metal patterning. We demonstrate arrays of gold and silver mid-infrared plasmonic filters, fabricated on silicon, intended for use in optical filter blocks or for future integration with infrared imagers. The filter arrays are designed for the wavelength range 2-7 µm, and exhibit peak filter transmission efficiencies around 70%.
Collapse
|
3
|
Maruyama K, Mizuna M, Kosuge T, Takeda Y, Iwase E, Kan T. Spiral Chiral Metamaterial Structure Shape for Optical Activity Improvements. MICROMACHINES 2023; 14:1156. [PMID: 37374740 DOI: 10.3390/mi14061156] [Citation(s) in RCA: 0] [Impact Index Per Article: 0] [Reference Citation Analysis] [Abstract] [Key Words] [Grants] [Track Full Text] [Subscribe] [Scholar Register] [Received: 05/01/2023] [Revised: 05/26/2023] [Accepted: 05/28/2023] [Indexed: 06/29/2023]
Abstract
We report on a spiral structure suitable for obtaining a large optical response. We constructed a structural mechanics model of the shape of the planar spiral structure when deformed and verified the effectiveness of the model. As a verification structure, we fabricated a large-scale spiral structure that operates in the GHz band by laser processing. Based on the GHz radio wave experiments, a more uniform deformation structure exhibited a higher cross-polarization component. This result suggests that uniform deformation structures can improve circular dichroism. Since large-scale devices enable speedy prototype verification, the obtained knowledge can be exported to miniaturized-scale devices, such as MEMS terahertz metamaterials.
Collapse
Affiliation(s)
- Kohei Maruyama
- School of Informatics and Engineering, The University of Electro-Communications, Tokyo 182-8585, Japan
| | - Miyako Mizuna
- Department of Applied Mechanics and Aerospace Engineering, Waseda University, Tokyo 169-8555, Japan
| | - Takuya Kosuge
- Department of Mechanical and Intelligent Systems Engineering, Graduate School of Informatics and Engineering, The University of Electro-Communications, Tokyo 182-8585, Japan
| | - Yuki Takeda
- Department of Applied Mechanics and Aerospace Engineering, Waseda University, Tokyo 169-8555, Japan
| | - Eiji Iwase
- Department of Applied Mechanics and Aerospace Engineering, Waseda University, Tokyo 169-8555, Japan
- Kagami Memorial Research Institute for Materials Science and Technology, Waseda University, Tokyo 169-0051, Japan
| | - Tetsuo Kan
- Department of Mechanical and Intelligent Systems Engineering, Graduate School of Informatics and Engineering, The University of Electro-Communications, Tokyo 182-8585, Japan
| |
Collapse
|
4
|
He X, Shen X, Beckett P, Xiao D, Liu X, Yin R. Hybrid SWM-IR narrow bandpass filters with high optical density. APPLIED OPTICS 2023; 62:4074-4079. [PMID: 37706719 DOI: 10.1364/ao.491764] [Citation(s) in RCA: 0] [Impact Index Per Article: 0] [Reference Citation Analysis] [Abstract] [Track Full Text] [Subscribe] [Scholar Register] [Received: 03/27/2023] [Accepted: 04/19/2023] [Indexed: 09/15/2023]
Abstract
Narrow bandpass filters (NBFs), which are designed to accept a narrow wavelength range and simultaneously reject a much wider range, show great potential in applications such as spectral imaging, lidar detection, fluorescence microscopy, and others. In this paper, we propose and numerically simulate NBF technology for infrared (IR) optical applications. The filter is a combination of plasmonic nanostructures and improved induced transmission layers. The operating wavelength range is from 1360 to 5000 nm [short wave mid-infrared radiation(SWM-IR)], with a FWHM of less than 10 nm and maximum optical density of around 10. Therefore, our SWM-IR hybrid filter can distinguish much smaller differences in terms of spectrum information and reduce the background noise level even if using an optical amplifier.
Collapse
|
5
|
Wang Y, Huang W, Lin YS, Yang BR. A tunable color filter using a hybrid metasurface composed of ZnO nanopillars and Ag nanoholes. NANOSCALE ADVANCES 2022; 4:3624-3633. [PMID: 36134352 PMCID: PMC9400519 DOI: 10.1039/d2na00286h] [Citation(s) in RCA: 3] [Impact Index Per Article: 1.5] [Reference Citation Analysis] [Abstract] [Grants] [Track Full Text] [Figures] [Subscribe] [Scholar Register] [Received: 05/06/2022] [Accepted: 07/20/2022] [Indexed: 06/16/2023]
Abstract
We propose the design of symmetrical and asymmetrical tunable color filters (TCFs) by using hybrid metasurface nanostructures in the visible wavelength range. They are composed of circular zinc oxide (ZnO) nanopillars and silver (Ag) nanoholes on a silica substrate. These TCFs exhibit ultrahigh transmission intensity over 90%, different tuning ranges, and polarization-dependent/independent characteristics. By changing the distance between the ZnO nanopillars and silica substrate, the resonant wavelength of TCFs could be tuned remarkably. Moreover, we also demonstrate the stability of TCFs under different disturbances and angles of incident light. Furthermore, the resonant wavelengths are red-shifted by increasing the ambient refraction index. TCFs exhibit great tunability and ultrahigh transmission intensity up to 100%. This design opens up an avenue to widespread optoelectronic applications, such as ultrahigh resolution color displays, high-efficiency biosensors, pressure sensors, and selective color filters.
Collapse
Affiliation(s)
- Yicheng Wang
- School of Electronics and Information Technology, Sun Yat-Sen University Guangzhou 510006 China
| | - Weikai Huang
- School of Electronics and Information Technology, Sun Yat-Sen University Guangzhou 510006 China
| | - Yu-Sheng Lin
- School of Electronics and Information Technology, Sun Yat-Sen University Guangzhou 510006 China
| | - Bo-Ru Yang
- School of Electronics and Information Technology, Sun Yat-Sen University Guangzhou 510006 China
| |
Collapse
|
6
|
Wang K, Xiong Y, Li Q, Wang Y, Zhang J, Liu H, Liu Z, Wang T, Shen Z, Wang X, Wang X, Gao J, Yang H. Near-infrared narrow-band minus filter based on a Mie magnetic dipole resonance. OPTICS EXPRESS 2022; 30:22830-22837. [PMID: 36224974 DOI: 10.1364/oe.454541] [Citation(s) in RCA: 1] [Impact Index Per Article: 0.5] [Reference Citation Analysis] [Abstract] [Track Full Text] [Subscribe] [Scholar Register] [Received: 02/16/2022] [Accepted: 04/11/2022] [Indexed: 06/16/2023]
Abstract
The traditional minus filter is composed of many layers of thin films, which makes it difficult and complicated to manufacture. It is sensitive to incident light angle and polarization. Here, we propose a near-infrared narrow-band minus filter with a full width at half maximum around 5 nm made of all-dielectric Si-SiO2 structures without any ohmic loss. The stop band transmittance of the proposed filter is close to 0, while its broad pass band transmittance is as high as 90% in the work wavelength range. Theoretical analysis shows that the transmission dip originated from magnetic dipole resonance: Its position can be tuned from 1.3 µm to 1.8 µm by changing the thickness of Si structure, and the proposed structure is insensitive to changes in incident light angle and polarization angle. We further studied its potential applications as a refractive index sensor. The sensitivity of dip1 and dip2 are as high as 953.53 nm/RIU and 691.09 nm/RIU, while their figure of merit is almost unchanged: 59.59 and 115.18, respectively.
Collapse
|
7
|
Ham S, Park S, Jang SW, Lee J, Ju BK, Kim H. Design of structural coloration for full-color high-definition computer-generated holograms. OPTICS EXPRESS 2022; 30:19839-19854. [PMID: 36221750 DOI: 10.1364/oe.458176] [Citation(s) in RCA: 0] [Impact Index Per Article: 0] [Reference Citation Analysis] [Abstract] [Track Full Text] [Subscribe] [Scholar Register] [Received: 03/13/2022] [Accepted: 05/12/2022] [Indexed: 06/16/2023]
Abstract
This paper investigates the submicron scale color filter design in the high-definition computer-generated hologram (HD-CGH). It is addressed that single pixel structural coloration is essential for full-color wide-viewing angle HD-CGH because the conventional RGB color stripe filter degrades HD-CGH image quality due to low misalignment tolerance. Considering that a submicron scale slit or hole with metallic mirror sidewalls can operate as a single pixel color filter. We propose a design of single pixel RGB plasmonic color filter (PCF) and present the feasibility of applying the proposed single pixel RGB PCF to high-definition HD-CGHs. Based on the RGB PCF platform, a 1.1 µm × 1.1 µm RGB PCF is designed and the corresponding optical characteristics of the full-color HD-CGH are analyzed.
Collapse
|
8
|
Ma X, He W, Xin L, Yang Z, Liu Z. Imaging performance of a mid-infrared metalens with a machining error. APPLIED OPTICS 2022; 61:60-68. [PMID: 35200806 DOI: 10.1364/ao.438728] [Citation(s) in RCA: 1] [Impact Index Per Article: 0.5] [Reference Citation Analysis] [Abstract] [Track Full Text] [Subscribe] [Scholar Register] [Received: 07/26/2021] [Accepted: 10/12/2021] [Indexed: 06/14/2023]
Abstract
Metalenses exhibit excellent performance as a new type of optical element; mid-infrared devices based on metalenses are advantageous to numerous applications in biomedical, military and industrial fields. The demand for large-area and high-efficiency mid-infrared metalenses has increased in recent years. However, the current processing methods for metalens production introduce different types of processing errors. Therefore, qualitative analyses of various errors that may exist in the processing of metalenses should be performed. In this study, we use the finite-difference time-domain calculation method and introduce various typical errors into a transmission phase-based mid-infrared metalens for simulation and analysis. The simulation results show that the defects caused by these processes affect focusing efficiency, and that some defects affect the quality of light. Subsequently, we prepare a metalens within the allowable error range and test its optical performances. The experiment confirms the excellent imaging performance of our metalens. Our study can help manufacturers identify defects to improve manufacturing processes, thereby enabling the incorporation of metalenses in industrial applications.
Collapse
|
9
|
Kosger AC, Ghobadi A, Rashed AR, Caglayan H, Ozbay E. Generation of additive colors with near unity amplitude using a multilayer tandem Fabry-Perot cavity. OPTICS LETTERS 2021; 46:3464-3467. [PMID: 34264239 DOI: 10.1364/ol.430985] [Citation(s) in RCA: 0] [Impact Index Per Article: 0] [Reference Citation Analysis] [Abstract] [Track Full Text] [Subscribe] [Scholar Register] [Received: 05/07/2021] [Accepted: 06/16/2021] [Indexed: 06/13/2023]
Abstract
In this paper, the generation of additive red-green-blue (RGB) colors in reflectance mode with near unity amplitude is demonstrated. For this purpose, a multilayer structure made of metal-insulator-metal-semiconductor-insulator stacks is designed to achieve >0.9 reflection peaks with full-width-at-half-maximum values <0.3λpeak. The proposed design also shows near zero reflection in off-resonance spectral ranges, and this, in turn, leads to high color purity. The optimized designs are fabricated, and simulation and theoretical results are verified with characterization findings. This work demonstrates the potential of multilayer tandem cavity designs in the realization of lithography-free large-scale compatible functional optical coatings.
Collapse
|
10
|
Liu H, Sun Z. Narrow-band, low-sideband plasmonic filter of asymmetric bi-layer metallic nanoslit arrays. OPTICS EXPRESS 2021; 29:13590-13599. [PMID: 33985091 DOI: 10.1364/oe.424296] [Citation(s) in RCA: 1] [Impact Index Per Article: 0.3] [Reference Citation Analysis] [Abstract] [Track Full Text] [Subscribe] [Scholar Register] [Received: 03/04/2021] [Accepted: 04/09/2021] [Indexed: 06/12/2023]
Abstract
We propose a narrow-band plasmonic filter with low sidebands in the VIS-NIR regime, consisting of two closely spaced, optically thin layers of asymmetric metallic nanoslit arrays that have equal periods but different slit widths. Based on numerical simulations, we clarify that the filtering characteristics in the transmission spectrum is mainly due to intercoupled local plasmon resonance (LPR) modes in the top- and bottom-layer nanoslits and in-plane waveguiding surface plasmon resonance (SPR) modes bound to the top and bottom metal structure layers respectively. The intercoupled LPR modes boost the transmission in a way that the adjoining nanoslits in the top and bottom metal layers act as optical antennas efficiently receiving and emitting light via intermediate plasmon modes, while the in-plane SPR modes at neighboring wavelengths suppress the transmission, so as to shape the passband peak. It's important that asymmetry of the nanoslits helps to improve quality factor of the intercoupled LPR mode and thus to reduce the passband width. Also, asymmetry of the bi-layer metallic nanoslit arrays helps to suppress the sidebands that are relevant to the higher-order in-plane SPR modes at shorter wavelengths. In the spectrum at longer wavelengths, non-resonant transmission of light is suppressed by increased total thickness of the structured metal layers. Furthermore, a two-dimensional version of the filter structure is presented, demonstrating similar filtering characteristics that can be optimally used for arbitrarily polarized or unpolarized light.
Collapse
|
11
|
Li L, Shi S, Escuti MJ. Improved saturation and wide-viewing angle color filters based on multi-twist retarders. OPTICS EXPRESS 2021; 29:4124-4138. [PMID: 33770998 DOI: 10.1364/oe.416961] [Citation(s) in RCA: 0] [Impact Index Per Article: 0] [Reference Citation Analysis] [Abstract] [Track Full Text] [Subscribe] [Scholar Register] [Received: 12/09/2020] [Accepted: 01/12/2021] [Indexed: 06/12/2023]
Abstract
Birefringent color filters serve a critical role in next-generation display systems, including augmented-/virtual-/mixed-reality headsets, and many types of optical remote sensing. Most prior polarization interference filters (PIFs) employ many individually aligned plates that enable only relatively thick color filters (≥100s of µm), are usually limited to small clear apertures (few cm), and offer poor off-axis performance. Here, we report on a family of monolithic, thin-film, birefringent PIFs formed using liquid crystal polymer (LCP) network materials, also known as reactive mesogens. These multi-twist retarders (MTRs) are only a few µm thick and have a single alignment surface. They offer high color saturation with a notch-type pass/stopband, analogous to Solc PIFs and stable off-axis performance. Here, we apply simplifying assumptions inspired by Solc PIFs, and develop a design method resulting in MTRs with an alternating achiral/chiral architecture. We theoretically and experimentally presented three types of MTR color filters (blue-yellow, green-magenta, and cyan-red), which manifest strong color filtering behavior and improved angular performance (up to ±20°) with larger color space coverage and high total light efficiency compared to their Solc filters counterparts. Such high-saturated and wide-viewing MTR color filters can be promising elements to maintain the system field of view (FOV) in the next-generation displays or spectral imaging applications.
Collapse
|
12
|
Sultan MA, Balli F, Lau DL, Hastings JT. Hybrid metasurfaces for simultaneous focusing and filtering. OPTICS LETTERS 2021; 46:214-217. [PMID: 33449000 DOI: 10.1364/ol.410080] [Citation(s) in RCA: 1] [Impact Index Per Article: 0.3] [Reference Citation Analysis] [Abstract] [Track Full Text] [Subscribe] [Scholar Register] [Received: 09/15/2020] [Accepted: 12/07/2020] [Indexed: 06/12/2023]
Abstract
This work presents the design and fabrication of polymeric, structural optical filters that simultaneously focus light. These filters represent a novel, to the best of our knowledge, design at the boundary between diffractive optics and metasurfaces that may provide significant advantages for both digital and hyperspectral imaging. Filters for visible and near-infrared wavelengths were designed using finite-difference time-domain (FDTD) simulations. Prototype filters were fabricated using two-photon lithography, a form of nanoscale 3D printing, and have geometries suitable to replication by molding. The experimentally measured spectral transmission and focused spot size of each filter show excellent agreement with simulation.
Collapse
|
13
|
Lee T, Lee C, Oh DK, Badloe T, Ok JG, Rho J. Scalable and High-Throughput Top-Down Manufacturing of Optical Metasurfaces. SENSORS (BASEL, SWITZERLAND) 2020; 20:E4108. [PMID: 32718085 PMCID: PMC7435655 DOI: 10.3390/s20154108] [Citation(s) in RCA: 11] [Impact Index Per Article: 2.8] [Reference Citation Analysis] [Abstract] [Key Words] [Track Full Text] [Download PDF] [Figures] [Subscribe] [Scholar Register] [Received: 06/22/2020] [Revised: 07/18/2020] [Accepted: 07/19/2020] [Indexed: 11/18/2022]
Abstract
Metasurfaces have shown promising potential to miniaturize existing bulk optical components thanks to their extraordinary optical properties and ultra-thin, small, and lightweight footprints. However, the absence of proper manufacturing methods has been one of the main obstacles preventing the practical application of metasurfaces and commercialization. Although a variety of fabrication techniques have been used to produce optical metasurfaces, there are still no universal scalable and high-throughput manufacturing methods that meet the criteria for large-scale metasurfaces for device/product-level applications. The fundamentals and recent progress of the large area and high-throughput manufacturing methods are discussed with practical device applications. We systematically classify various top-down scalable patterning techniques for optical metasurfaces: firstly, optical and printing methods are categorized and then their conventional and unconventional (emerging/new) techniques are discussed in detail, respectively. In the end of each section, we also introduce the recent developments of metasurfaces realized by the corresponding fabrication methods.
Collapse
Affiliation(s)
- Taejun Lee
- Department of Mechanical Engineering, Pohang University of Science and Technology (POSTECH), Pohang 37673, Korea; (T.L.); (C.L.); (D.K.O.); (T.B.)
| | - Chihun Lee
- Department of Mechanical Engineering, Pohang University of Science and Technology (POSTECH), Pohang 37673, Korea; (T.L.); (C.L.); (D.K.O.); (T.B.)
| | - Dong Kyo Oh
- Department of Mechanical Engineering, Pohang University of Science and Technology (POSTECH), Pohang 37673, Korea; (T.L.); (C.L.); (D.K.O.); (T.B.)
- Department of Mechanical and Automotive Engineering, Seoul National University of Science and Technology, Seoul 01811, Korea;
| | - Trevon Badloe
- Department of Mechanical Engineering, Pohang University of Science and Technology (POSTECH), Pohang 37673, Korea; (T.L.); (C.L.); (D.K.O.); (T.B.)
| | - Jong G. Ok
- Department of Mechanical and Automotive Engineering, Seoul National University of Science and Technology, Seoul 01811, Korea;
| | - Junsuk Rho
- Department of Mechanical Engineering, Pohang University of Science and Technology (POSTECH), Pohang 37673, Korea; (T.L.); (C.L.); (D.K.O.); (T.B.)
- Department of Chemical Engineering, Pohang University of Science and Technology (POSTECH), Pohang 37673, Korea
| |
Collapse
|
14
|
Jiang C, Liang S, Wan L, Du K, Zhang W, Li Z, Jin Chua S, Mei T. Plasmonic color filter based on a hetero-metal-insulator-metal grating. APPLIED OPTICS 2020; 59:4432-4436. [PMID: 32400423 DOI: 10.1364/ao.391976] [Citation(s) in RCA: 0] [Impact Index Per Article: 0] [Reference Citation Analysis] [Abstract] [Track Full Text] [Subscribe] [Scholar Register] [Received: 03/19/2020] [Accepted: 04/19/2020] [Indexed: 06/11/2023]
Abstract
Plasmonic color filters are expected to be candidates for application to complementary metal-oxide-semiconductor (CMOS) image sensor arrays with reduced pixel size, owing to the subwavelength mode volume of plasmons. Designs of metallic gratings based on the guided-mode resonance effect suffer from the sideband transmission issue due to high-order diffraction. Here, we propose a plasmonic color filter structure based on a hetero-metal-insulator-metal grating. The guided mode, in resonance with the second-order diffraction, is highly attenuated by the forbidden band, such that the sideband transmission can be suppressed. As calculated by using the transfer matrix method and the finite-difference time-domain method, the Al-ZnO-Ag waveguide-based structure presents a color filter characteristic with the peak transmittance greater than 70% and the peak wavelength tunable in the visible light band. It may find application in displays, image sensors, and biomedical imaging technologies.
Collapse
|
15
|
Avrutsky I, Smith EM, Vangala S, Gibson R, Hendrickson JR, Cleary JW. Angle- and polarization-independent mid-infrared narrowband optical filters using dense arrays of resonant cavities. OPTICS EXPRESS 2019; 27:37481-37493. [PMID: 31878527 DOI: 10.1364/oe.27.037481] [Citation(s) in RCA: 0] [Impact Index Per Article: 0] [Reference Citation Analysis] [Abstract] [Track Full Text] [Subscribe] [Scholar Register] [Received: 10/01/2019] [Accepted: 11/24/2019] [Indexed: 06/10/2023]
Abstract
We report design and experimental verification of narrowband mid-infrared optical filters with transmission characteristics that are practically constant over a wide range of incident angles. The filter employs a dense array of dielectric resonant cavities in a metal film, where the transmission of each cavity depends upon localized rather than travelling fields, making the filter fundamentally angle-independent. We show experimentally a transmission around 90% from normal incidence up to 60°. Simulations show that the filter becomes polarization-independent when geometry of the cavities is azimuthally symmetric.
Collapse
|
16
|
Craig BJ, Meng J, Shrestha VR, Cadusch JJ, Crozier KB. Mid- to long-wave infrared computational spectroscopy using a subwavelength coaxial aperture array. Sci Rep 2019; 9:13537. [PMID: 31537829 PMCID: PMC6753135 DOI: 10.1038/s41598-019-49593-0] [Citation(s) in RCA: 18] [Impact Index Per Article: 3.6] [Reference Citation Analysis] [Abstract] [Track Full Text] [Download PDF] [Figures] [Journal Information] [Subscribe] [Scholar Register] [Received: 02/25/2019] [Accepted: 08/22/2019] [Indexed: 11/24/2022] Open
Abstract
Miniaturized spectrometers are advantageous for many applications and can be achieved by what we term the filter-array detector-array (FADA) approach. In this method, each element of an optical filter array filters the light that is transmitted to the matching element of a photodetector array. By providing the outputs of the photodetector array and the filter transmission functions to a reconstruction algorithm, the spectrum of the light illuminating the FADA device can be estimated. Here, we experimentally demonstrate an array of 101 band-pass transmission filters that span the mid- to long-wave infrared (6.2 to 14.2 μm). Each filter comprises a sub-wavelength array of coaxial apertures in a gold film. As a proof-of-principle demonstration of the FADA approach, we use a Fourier transform infrared (FTIR) microscope to record the optical power transmitted through each filter. We provide this information, along with the transmission spectra of the filters, to a recursive least squares (RLS) algorithm that estimates the incident spectrum. We reconstruct the spectrum of the infrared light source of our FTIR and the transmission spectra of three polymer-type materials: polyethylene, cellophane and polyvinyl chloride. Reconstructed spectra are in very good agreement with those obtained via direct measurement by our FTIR system.
Collapse
Affiliation(s)
- Benjamin J Craig
- School of Physics, University of Melbourne, Victoria, 3010, Australia
| | - Jiajun Meng
- Department of Electrical and Electronic Engineering, University of Melbourne, Victoria, 3010, Australia
| | | | - Jasper J Cadusch
- Department of Electrical and Electronic Engineering, University of Melbourne, Victoria, 3010, Australia
| | - Kenneth B Crozier
- School of Physics, University of Melbourne, Victoria, 3010, Australia. .,Department of Electrical and Electronic Engineering, University of Melbourne, Victoria, 3010, Australia.
| |
Collapse
|
17
|
Zhang J, Yang J, Schell M, Anopchenko A, Tao L, Yu Z, Lee HWH. Gate-tunable optical filter based on conducting oxide metasurface heterostructure. OPTICS LETTERS 2019; 44:3653-3656. [PMID: 31368935 DOI: 10.1364/ol.44.003653] [Citation(s) in RCA: 0] [Impact Index Per Article: 0] [Reference Citation Analysis] [Abstract] [Track Full Text] [Subscribe] [Scholar Register] [Received: 05/24/2019] [Accepted: 06/17/2019] [Indexed: 06/10/2023]
Abstract
A gate-tunable plasmonic optical filter incorporating a subwavelength patterned metal-insulator-metal metasurface heterostructure is proposed. An additional thin transparent conducting oxide (TCO) layer is embedded in the insulator layer to form a double metal-oxide-semiconductor configuration. Heavily n-doped indium tin oxide (ITO) is employed as the TCO material, whose optical property can be electrically tuned by the formation of a thin active epsilon-near-zero layer at the ITO-oxide interfaces. Full-wave electromagnetic simulations show that amplitude modulation and shift of transmission peak are achievable with 3-5 V applied bias, depending on the application. Moreover, the modulation strength and transmission peak shift increase with a thinner ITO layer. This work is an essential step toward a realization of next-generation compact photonic/plasmonic integrated devices.
Collapse
|
18
|
Ghobadi A, Hajian H, Butun B, Ozbay E. Strong Interference in Planar, Multilayer Perfect Absorbers: Achieving High-Operational Performances in Visible and Near-Infrared Regimes. IEEE NANOTECHNOLOGY MAGAZINE 2019. [DOI: 10.1109/mnano.2019.2916113] [Citation(s) in RCA: 5] [Impact Index Per Article: 1.0] [Reference Citation Analysis] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Indexed: 11/07/2022]
|
19
|
Wilson K, Marocico CA, Pedrueza-Villalmanzo E, Smith C, Hrelescu C, Bradley AL. Plasmonic Colour Printing by Light Trapping in Two-Metal Nanostructures. NANOMATERIALS 2019; 9:nano9070963. [PMID: 31266205 PMCID: PMC6669635 DOI: 10.3390/nano9070963] [Citation(s) in RCA: 2] [Impact Index Per Article: 0.4] [Reference Citation Analysis] [Abstract] [Key Words] [Grants] [Track Full Text] [Download PDF] [Figures] [Subscribe] [Scholar Register] [Received: 05/29/2019] [Revised: 06/26/2019] [Accepted: 06/27/2019] [Indexed: 11/21/2022]
Abstract
Structural colour generation by nanoscale plasmonic structures is of major interest for non-bleaching colour printing, anti-counterfeit measures and decoration applications. We explore the physics of a two-metal plasmonic nanostructure consisting of metallic nanodiscs separated from a metallic back-reflector by a uniform thin polymer film and investigate the potential for vibrant structural colour in reflection. We demonstrate that light trapping within the nanostructures is the primary mechanism for colour generation. The use of planar back-reflector and polymer layers allows for less complex fabrication requirements and robust structures, but most significantly allows for the easy incorporation of two different metals for the back-reflector and the nanodiscs. The simplicity of the structure is also suitable for scalability. Combinations of gold, silver, aluminium and copper are considered, with wide colour gamuts observed as a function of the polymer layer thickness. The structural colours are also shown to be insensitive to the viewing angle. Structures of copper nanodiscs with an aluminium back-reflector produce the widest colour gamut.
Collapse
Affiliation(s)
- Keith Wilson
- School of Physics and CRANN, Trinity College Dublin, Dublin D2, Ireland
| | | | | | - Christopher Smith
- School of Physics and CRANN, Trinity College Dublin, Dublin D2, Ireland
| | - Calin Hrelescu
- School of Physics and CRANN, Trinity College Dublin, Dublin D2, Ireland
| | - A Louise Bradley
- School of Physics and CRANN, Trinity College Dublin, Dublin D2, Ireland.
| |
Collapse
|
20
|
Suido Y, Yamamoto Y, Thomas G, Ajiki Y, Kan T. Extension of the Measurable Wavelength Range for a Near-Infrared Spectrometer Using a Plasmonic Au Grating on a Si Substrate. MICROMACHINES 2019; 10:E403. [PMID: 31212981 PMCID: PMC6630820 DOI: 10.3390/mi10060403] [Citation(s) in RCA: 6] [Impact Index Per Article: 1.2] [Reference Citation Analysis] [Abstract] [Key Words] [Track Full Text] [Download PDF] [Figures] [Subscribe] [Scholar Register] [Received: 05/14/2019] [Revised: 06/10/2019] [Accepted: 06/13/2019] [Indexed: 01/18/2023]
Abstract
In this paper, we proposed near-infrared spectroscopy based on a Si photodetector equipped with a gold grating and extended the measurable wavelength range to cover 1200-1600 nm by improving a spectrum derivation procedure. In the spectrum derivation, photocurrent data during alteration of the incidence angle of the measured light were converted using a responsivity matrix R, which determines the spectroscopic characteristics of the photodetector device. A generalized inverse matrix of R was used to obtain the spectrum and to fit a situation where multiple surface plasmon resonance (SPR) peaks appeared in the scanning range. When light composed of two wavelengths, 1250 nm and 1450 nm, was irradiated, the two wavelengths were distinctively discriminated using the improved method.
Collapse
Affiliation(s)
- Yu Suido
- Department of Mechanical Engineering and Intelligent Systems, Graduate School of Informatics and Engineering, The University of Electro-Communications, 1-5-1 Chofugaoka, Chofu-city, Tokyo 182-8585, Japan.
| | - Yosuke Yamamoto
- Department of Mechanical Engineering and Intelligent Systems, Graduate School of Informatics and Engineering, The University of Electro-Communications, 1-5-1 Chofugaoka, Chofu-city, Tokyo 182-8585, Japan.
| | - Gaulier Thomas
- École Nationale Supérieure de Mécanique et des Microtechniques, 26 Rue de l'Épitaphe, 25000 Besançon, France.
| | - Yoshiharu Ajiki
- Department of Mechanical Engineering and Intelligent Systems, Graduate School of Informatics and Engineering, The University of Electro-Communications, 1-5-1 Chofugaoka, Chofu-city, Tokyo 182-8585, Japan.
- Mobile System Development Division, Imager & Analog LSI Technology Department, Olympus Corporation, 2-3 Kuboyama-cho, Hachioji-city, Tokyo 192-8512, Japan.
| | - Tetsuo Kan
- Department of Mechanical Engineering and Intelligent Systems, Graduate School of Informatics and Engineering, The University of Electro-Communications, 1-5-1 Chofugaoka, Chofu-city, Tokyo 182-8585, Japan.
| |
Collapse
|
21
|
A High-Efficiency Multispectral Filter Based on Plasmonic Hybridization between Two Cascaded Ultrathin Nanogratings. Molecules 2019; 24:molecules24112038. [PMID: 31141987 PMCID: PMC6600351 DOI: 10.3390/molecules24112038] [Citation(s) in RCA: 4] [Impact Index Per Article: 0.8] [Reference Citation Analysis] [Abstract] [Key Words] [Track Full Text] [Download PDF] [Figures] [Journal Information] [Subscribe] [Scholar Register] [Received: 03/19/2019] [Revised: 05/05/2019] [Accepted: 05/09/2019] [Indexed: 11/23/2022] Open
Abstract
Overcoming the disadvantages of low transmission and broad peak bandwidth of previously reported plasmonic color filters, a high-efficiency multispectral plasmonic color filter is theoretically proposed with two cascaded ultrathin metallic nanogratings separated by two heterogeneous dielectric layers, and its optical properties are theoretically investigated using the finite-difference time-domain method. The transmission spectrum presents three near-unity peak bands accompanied with three near-null dip bands adjacent around them. Both transmission efficiencies of above 90% and ultranarrow peak bandwidth of 20 nm are achieved in the visible regime. The peak band positions can be flexibly tailored by varying the structural parameters. The filter selects the visible color with high signal noise ratio at the peak bands. The outstanding spectral properties of this filter indicate significant improvement for the high-accuracy color filtering and multispectral imaging applications. The simulated near-field electromagnetic distributions suggest that the excitation of the hybrid antisymmetric surface plasmon polariton (SPP) leaky mode and metal-insulator-metal waveguide modes are responsible for the peak transmission bands, while the formation of the hybrid SPP bound modes confined on the bottom nanograting makes the dip transmission bands, all of which are the consequence of the plasmonic hybridization between the two neighboring metallic nanogratings.
Collapse
|
22
|
Plasmonic Color Filter Array with High Color Purity for CMOS Image Sensors. SENSORS 2019; 19:s19081750. [PMID: 31013721 PMCID: PMC6515349 DOI: 10.3390/s19081750] [Citation(s) in RCA: 9] [Impact Index Per Article: 1.8] [Reference Citation Analysis] [Abstract] [Key Words] [Track Full Text] [Download PDF] [Figures] [Subscribe] [Scholar Register] [Received: 03/05/2019] [Revised: 04/04/2019] [Accepted: 04/06/2019] [Indexed: 11/27/2022]
Abstract
We demonstrate the multiband color filtering of a standard RGB color and a complementary CMY color by a plasmonic color filter, composed of concentric corrugated metallic thin film rings. The surface plasmon resonance is excited by the periodic corrugation, and the coupled light is transmitted through the central subwavelength aperture. Color selectivity is achieved not only in the visible but also in the near-infrared (NIR) region. Therefore, simultaneous imaging with visible and NIR can be realized by the integration of plasmonic color filters with sensors. We investigate the angle of incidence dependence of the transmission color selectivity and the color purity of the fabricated plasmonic color filter array.
Collapse
|
23
|
Kim YJ, Yoo YJ, Lee GJ, Yoo DE, Lee DW, Siva V, Song H, Kang IS, Song YM. Enlarged Color Gamut Representation Enabled by Transferable Silicon Nanowire Arrays on Metal-Insulator-Metal Films. ACS APPLIED MATERIALS & INTERFACES 2019; 11:11849-11856. [PMID: 30831023 DOI: 10.1021/acsami.8b21554] [Citation(s) in RCA: 4] [Impact Index Per Article: 0.8] [Reference Citation Analysis] [Abstract] [Key Words] [Track Full Text] [Subscribe] [Scholar Register] [Indexed: 06/09/2023]
Abstract
Artificial structural colors arising from nanosized materials have drawn much attention because of ultrahigh resolution, durability, and versatile utilizations compared to conventional pigments and dyes. However, the limited color range with current approaches has interrupted the supply for upcoming structural colorimetric applications. Here, we suggest a strategy for the widening of the color gamut by linear combination of two different resonance modes originating from silicon nanowire arrays (Si NWAs) and metal-insulator-metal nanoresonators. The enlarged color gamut representations are simply demonstrated by transferring Si NWAs embedded in a flexible polymer layer without additional treatment/fabrication. Optical simulation is used to verify the additive creation of a new resonance dip, without disturbing the original mode, and provides "predictable" color reproduction. Furthermore, we prove that the proposed structures are applicable to well-known semiconductor materials for various flexible optical devices and other colorant applications.
Collapse
Affiliation(s)
- Yeong Jae Kim
- School of Electrical Engineering and Computer Science , Gwangju Institute of Science and Technology , 123 Cheomdangwagi-ro , Buk-gu, Gwangju 61005 , Republic of Korea
| | - Young Jin Yoo
- School of Electrical Engineering and Computer Science , Gwangju Institute of Science and Technology , 123 Cheomdangwagi-ro , Buk-gu, Gwangju 61005 , Republic of Korea
| | - Gil Ju Lee
- School of Electrical Engineering and Computer Science , Gwangju Institute of Science and Technology , 123 Cheomdangwagi-ro , Buk-gu, Gwangju 61005 , Republic of Korea
| | - Dong Eun Yoo
- National Nanofab Center , Korea Advanced Institute of Science and Technology , 291 Daehak-ro , Yuseong-gu, Daejeon 34141 , Republic of Korea
| | - Dong Wook Lee
- National Nanofab Center , Korea Advanced Institute of Science and Technology , 291 Daehak-ro , Yuseong-gu, Daejeon 34141 , Republic of Korea
| | - Vantari Siva
- School of Electrical Engineering and Computer Science , Gwangju Institute of Science and Technology , 123 Cheomdangwagi-ro , Buk-gu, Gwangju 61005 , Republic of Korea
| | - Hansung Song
- School of Electrical Engineering and Computer Science , Gwangju Institute of Science and Technology , 123 Cheomdangwagi-ro , Buk-gu, Gwangju 61005 , Republic of Korea
| | - Il Suk Kang
- National Nanofab Center , Korea Advanced Institute of Science and Technology , 291 Daehak-ro , Yuseong-gu, Daejeon 34141 , Republic of Korea
| | - Young Min Song
- School of Electrical Engineering and Computer Science , Gwangju Institute of Science and Technology , 123 Cheomdangwagi-ro , Buk-gu, Gwangju 61005 , Republic of Korea
| |
Collapse
|
24
|
Ghobadi A, Hajian H, Soydan MC, Butun B, Ozbay E. Lithography-Free Planar Band-Pass Reflective Color Filter Using A Series Connection of Cavities. Sci Rep 2019; 9:290. [PMID: 30670767 PMCID: PMC6342952 DOI: 10.1038/s41598-018-36540-8] [Citation(s) in RCA: 13] [Impact Index Per Article: 2.6] [Reference Citation Analysis] [Abstract] [Track Full Text] [Download PDF] [Figures] [Journal Information] [Subscribe] [Scholar Register] [Received: 06/05/2018] [Accepted: 11/23/2018] [Indexed: 12/03/2022] Open
Abstract
In this article, a lithography-free multilayer based color filter is realized using a proper series connection of two cavities that shows relatively high efficiency, high color purity, and a wide view angle. The proposed structure is a metal-insulator-metal-insulator-semiconductor (MIMIS) design. To optimize the device performance, at the first step, transfer matrix method (TMM) modeling is utilized to find the right choices of materials for each layer. Simulations are carried out later on to optimize the geometries of the layers to obtain our desired colors. Finally, the optimized devices are fabricated and experimentally characterized to evaluate our modelling findings. The characterization results of the fabricated samples prove the successful formation of efficient and wide view angle color filters. Unlike previously reported FP based designs that act as a band-stop filter in reflection mode (absorbing a narrow frequency range and reflecting the rest of the spectrum), this design generates a specific color by reflecting a narrow spectral range and absorbing the rest of the spectrum. The findings of this work can be extended to other multilayer structures where an efficient connection of cavities in a tandem scheme can propose functionalities that cannot be realized with conventional FP resonators.
Collapse
Affiliation(s)
- Amir Ghobadi
- NANOTAM - Nanotechnology Research Center, Bilkent University, Ankara, 06800, Turkey. .,Department of Electrical and Electronics Engineering, Bilkent University, Ankara, 06800, Turkey.
| | - Hodjat Hajian
- NANOTAM - Nanotechnology Research Center, Bilkent University, Ankara, 06800, Turkey
| | - Mahmut Can Soydan
- NANOTAM - Nanotechnology Research Center, Bilkent University, Ankara, 06800, Turkey.,Department of Electrical and Electronics Engineering, Bilkent University, Ankara, 06800, Turkey
| | - Bayram Butun
- NANOTAM - Nanotechnology Research Center, Bilkent University, Ankara, 06800, Turkey
| | - Ekmel Ozbay
- NANOTAM - Nanotechnology Research Center, Bilkent University, Ankara, 06800, Turkey. .,Department of Electrical and Electronics Engineering, Bilkent University, Ankara, 06800, Turkey. .,UNAM-National Nanotechnology Research Center, Bilkent University, Ankara, 06800, Turkey. .,Institute of Materials Science and Nanotechnology, Bilkent University, Ankara, 06800, Turkey. .,Department of Physics, Bilkent University, Ankara, 06800, Turkey.
| |
Collapse
|
25
|
An Investigation of Influencing Factors on Practical Sub-Diffraction-Limit Focusing of Planar Super-Oscillation Lenses. NANOMATERIALS 2018; 8:nano8040185. [PMID: 29565309 PMCID: PMC5923515 DOI: 10.3390/nano8040185] [Citation(s) in RCA: 12] [Impact Index Per Article: 2.0] [Reference Citation Analysis] [Abstract] [Key Words] [Track Full Text] [Download PDF] [Figures] [Subscribe] [Scholar Register] [Received: 01/31/2018] [Revised: 03/10/2018] [Accepted: 03/21/2018] [Indexed: 11/23/2022]
Abstract
Planar super-oscillation lenses (SOLs) can fulfill super-resolution focusing and nanoscopic imaging in the far field without the contribution of evanescent waves. Nevertheless, the existing deviations between the design and experimental results have been seldomly investigated, leaving the practical applications of SOLs unpredictable and uncontrollable. In this paper, some application-oriented issues are taken into consideration, such as the inevitable fabrication errors and the size effect of the designed SOLs, with the aim of providing an engineering reference to elaborately customize the demanded focusing light field. It turned out that a thicker structural film makes the focal spots enlarged, while the sloped sidewalls just weaken the intensity of the focal hotspot. Furthermore, the focal lengths are diminished with the decrease of device size, while the focal spots are enlarged. This research will promote the wide-spread applications of SOLs for sub-diffraction-limit far-field focusing in the areas of nanoscopy and high-density optical storage.
Collapse
|