1.6 μm dissipative soliton fiber laser mode-locked by cesium lead halide perovskite quantum dots

GaSb Film is a Saturable Absorber for Dissipative Soliton Generation in a Fiber Laser

Nanotechnology is at the forefront of scientific research and offers great prospects for the development of technology. As a type of III-V semiconductor, GaSb materials exhibit numerous outstanding optical and electrical characteristics that are very promising for nonlinear optical device applications. In this study, the electronic band structures of GaSb are theoretically calculated, and its application in dissipative soliton fiber lasers is validated. A GaSb thin film is deposited on a microfiber using magnetron sputtering deposition, and the morphology, chemical composition, structure, and nonlinear optical characteristics of the proposed microfiber-GaSb device are investigated. After incorporating it into an Er-doped fiber laser, dissipative soliton laser pulses are readily obtained with a fundamental frequency of 43.5 MHz. With increasing pump power, the fiber laser could work in the fundamental frequency mode-locking state. At a pump power of 570 mW, the pulse width and the output power are measured to be 917 fs and 49.75 mW, separately. These results reveal that GaSb can be used as an efficient saturable absorber, which will have potential applications in ultrafast optics.

CsPbBr3 Perovskite Nanocrystals for a Q-Switched Pulsed Fiber Laser in the C-Band Region

All-inorganic perovskite nanocrystals have been widely reported as promising light-harvesting and light-emitting semiconductor nanomaterials. However, their nonlinear optical properties and laser applications have rarely been explored, especially for pulse laser modulation in the telecommunication C-band window. Herein, we experimentally demonstrated a passively Q-switched erbium-doped fiber laser (EDFL) operation at the C-band region using perovskite CsPbBr₃ nanocrystals as a saturable absorber (SA). The broadband linear optical absorption in the 300-2000 nm range and the nonlinear optical absorption at the C-band range of around 1560 nm were discovered and investigated in CsPbBr₃ nanocrystals. The CsPbBr₃-based SA exhibited good saturable absorption performance with a modulation depth and saturation intensity equivalent to 19.1% and 10.9 MW/cm², respectively. By integrating the CsPbBr₃ SA into an EDFL cavity, a passively Q-switched operation with a central wavelength of 1560 nm, a threshold pump power of 60 mW, and the shortest pulse duration of 5.96 μs was achieved. In addition, such a Q-switching operation exhibited long-term stability. Our results indicate that the CsPbBr₃ perovskite nanocrystals can serve as an efficient candidate for constructing pulsed lasers in the C-band or even longer NIR wavelength region.

Ti3C2Tx MXene Quantum Dots with Surface-Terminated Groups (-F, -OH, =O, -Cl) for Ultrafast Photonics

Transition metal carbides and nitrides (MXenes) have attracted significant attention in photoelectric applications due to their highly tunable electronic and optical properties influenced by a flexible compositional or surface functional group regulation. Ti₃C₂T_x MXenes (-F, -OH, =O terminated) used in previous ultrafast photonic studies are usually synthesized via a generic hydrofluoric acid (HF) etching strategy, which may cause numerous defects and thus impedes the optoelectronic properties of Ti₃C₂T_x. In this contribution, inspired by a much higher conductivity and carrier mobility of Ti₃C₂T_x (-F, -OH, =O, -Cl terminated) prepared from a minimally intensive layer delamination method (MILD) etching strategy, we further optimized it with a liquid-phase exfoliation (LPE) method to synthesize pure Ti₃C₂T_x quantum dots (QDs) for ultrafast photonic. Compared to the other QDs saturable absorber (SA) devices performed at 1550 nm, our SA device exhibited a relatively low saturation intensity (1.983 GW/cm⁻²) and high modulation depth (11.6%), allowing for a more easily mode-locked pulse generation. A distinguished ultrashort pulse duration of 466 fs centered at the wavelength of 1566.57 nm with a fundamental frequency of 22.78 MHz was obtained in the communication band. Considering the SA based on such a Ti₃C₂T_x QDs tapered fiber is the first exploration of Er³⁺-doped fiber laser (EDFL), this work will open up a new avenue for applications in ultrafast photonics.

Advances of Nonlinear Photonics in Low-Dimensional Halide Perovskites

Hybrid halide perovskites emerging as a highly promising class of functional materials for semiconductor optoelectronic applications have drawn great attention from worldwide researchers. In the past few years, prominent nonlinear optical properties have been demonstrated in perovskite bulk structures indicating their bright prospect in the field of nonlinear optics (NLO). Following the surge of 3D perovskites, more recently, the low-dimensional perovskites (LDPs) materials ranging from two-, one-, to zero-dimension such as quantum-wells or colloidal nanostructures have displayed unexpectedly attractive NLO response due to the strong quantum confinement, remarkable exciton effect, and structural diversity. In this perspective, the current state of the art is reviewed in the field of NLO for LDP materials. The relationship between confinement effect and NLO is analyzed systematically to give a comprehensive understanding of the function of dimension reduction. Furthermore, future directions and challenges toward the improvement of the NLO in LDP materials are discussed to provide an outlook in this rapidly developing field.

Zero-Dimensional MXene-Based Optical Devices for Ultrafast and Ultranarrow Photonics Applications

In recent years, MXene has become a hotspot because of its good conductivity, strong broadband absorption, and tunable band gap. In this contribution, 0D MXene Ti3C2Tx quantum dots are synthesized by a liquid exfoliation method and a wideband nonlinear optical response from 800 to 1550 nm is studied, which have a larger nonlinear absorption coefficient β of -(11.24 ± 0.14) × 10-2 cm GW-1. The carrier dynamic processes of 0D MXene are explored with ultrahigh time resolution nondegenerate transient absorption (TA) spectroscopy, which indicates that the TA signal reaches its maximum in 1.28 ps. Furthermore, 0D MXene is used to generate ultrashort pulses in erbium or ytterbium-doped fiber laser cavity. High signal-to-noise (72 dB) femtosecond lasers with pulse durations as short as 170 fs with spectrum bandwidth of 14.8 nm are obtained. Finally, an ultranarrow fiber laser based on 0D MXene is also investigated and has a full width at half maximum of only 5 kHz, and the power fluctuation is less than 0.75% of the average power. The experimental works prove that 0D MXene is an excellent SA and has a promising application in ultrafast and ultranarrow photonics.