Tamm plasmons in metal/nanoporous GaN distributed Bragg reflector cavities for active and passive optoelectronics

Annular one-dimensional photonic crystals for salinity sensing

The use of annular one-dimensional (1D) photonic crystals (PCs) for salinity sensing is studied in this research. Annular 1D-PCs provide small and integrated structures that facilitate the creation of portable and miniaturized sensor equipment appropriate for field use. In order to generate annular 1D-PCs, the research explores the finite element method (FEM) simulation technique utilizing the COMSOL Multiphysics approach, highlighting the significance of exact control over layer thickness and uniformity. Furthermore, we construct a 1D annular PCs structure in the form [Formula: see text], where A is silicon ([Formula: see text]) and B is silicon dioxide ([Formula: see text]) of 40 nm and 70 nm, respectively, with a number of periods equal to 9. By incorporating a central defect layer of saline water (220 nm thickness), the sensor achieves optimum performance at normal incidence with a sensitivity (S) of [Formula: see text], a quality factor (Q) of 10.22, and a figure of merit (FOM) of [Formula: see text]. The design that is suggested has several advantages over past work on planners and annular 1D-PCs, including ease of implementation, performance at normal incidence, and high sensitivity.

Strengthening Modulus and Softening Strength of Nanoporous Gold in Multiaxial Tension: Insights from Molecular Dynamics

The functionalized applications of nanoporous metals place clear requirements on their basic mechanical properties, yet there is a lack of research on the mechanical response under multiaxial loading conditions. In this work, the mechanical behaviors of nanoporous gold under multiaxial tension are investigated via molecular dynamics simulations. The mechanical properties under different loading conditions are compared and the microstructure evolution is analyzed to clarify the deformation mechanisms of nanoporous gold in biaxial and triaxial tension. It is found that the modulus of nanoporous gold in multiaxial tension is strengthened and the strength is softened compared to uniaxial tension. The failure of nanoporous gold in multiaxial tension is dominated by the progressive yielding, necking, and rupture of ligaments along the multiple uniaxial loading directions. The dislocation activity under multiaxial loads is more intense and more prone to plastic deformation, ultimately resulting in lower strength and smaller failure strain. The findings provide more insight into the understanding of the deformation mechanisms of nanoporous metals under complex stress states.

Analysis and detection of women's reproductive hormones using a bistable and reconfigurable 1D annular photonic crystal composed of the Ge2Sb2Te5 phase-change material

In this study, the reconfigurable biosensing capabilities of the one-dimensional annular photonic structure, (AB)⁵CDC(AB)⁵, was examined theoretically. The proposed structure was made of concentric cylindrical layers of periodically modulated refractive indices, which were restricted in one direction only. Germanium antimony telluride (GST), which belongs to the class of phase-change materials (PCMs), was used in the fabrication of the proposed biosensing design. The entire study was carried out in the near-infrared region of the electromagnetic spectrum. The suggested biosensing structure was constructed by depositing alternate periodic cylindrical layers of SiO₂ and Si with a central air core. An air cavity coated on both sides by a phase-change chalcogenide material (Ge₂Sb₂Te₅) was introduced at the centre of the 1D annular photonic crystal to realize the (AB)⁵CDC(AB)⁵ structure. The simulation results of the proposed work were obtained using the MATLAB computational tool taking into consideration the modified transfer matrix method. The primary focus of this study was to measure the change in the position and intensity of the defect mode with respect to the change in the concentration levels of analytes containing progesterone and estradiol reproductive hormones separately in the amorphous and crystalline phases of the Ge₂Sb₂Te₅ material. Interestingly, a strong tunability in the position of the central wavelength of the defect mode inside the photonic band gap (PBG) was noticed during the phase transition of the GST material from amorphous to crystalline and back. In both the phases of the GST material, our design could identify minute refractive index variations in blood samples containing reproductive hormones at different concentrations for monitoring various gynaecological disorders in women. Besides sensitivity, other important parameters such as the limit of detection, signal-to-noise ratio, and quality factor were estimated to evaluate the biosensing capabilities of the proposed design.

Hybrid Tamm plasmon resonance excitation towards a simple and efficient biomedical detector of NaI solution

This work presents a theoretical verification for the detection of Sodium iodide (NaI) solution with different concentrations in the vicinity of Tamm plasmon (TP) resonance. The proposed sensing tool is constituted of {prism/Ag/cavity/(GaN/CaF₂)¹⁵/air}. The essential foundation of this study is based on the displacement of the TP resonance by varying the concentration of an aqueous solution of sodium iodide (NaI) that fills the cavity layer. The resonant TP dip is shifted downwards the shorter wavelengths with the increment of the Ag layer thickness. Nevertheless, the resonant TP dip is shifted upwards to longer wavelengths with the increment of NaI refractive index/concentration. Also, the sensitivity of the sensing tool decreases with the increment of the NaI refractive index. However, the minimum result is not less than the value of 9913 nm RIU⁻¹ for a concentration of 25%. Finally, the performance of our sensor in the form of the quality factor, detection limit, and figure of merit showed significant improvements in designing a high-performance liquid and biosensor.

NaI sensor: the suggested design of a NaI photonic crystal sensor that is constituted.

Progress of GaN-Based Optoelectronic Devices Integrated with Optical Resonances

Being direct wide bandgap, III-nitride (III-N) semiconductors have many applications in optoelectronics, including light-emitting diodes, lasers, detectors, photocatalysis, etc. Incorporation of III-N semiconductors with high-efficiency optical resonances including surface plasmons, distributed Bragg reflectors and micro cavities, has attracted considerable interests for upgrading their performance, which can not only reveal the new coupling mechanisms between optical resonances and quasiparticles, but also unveil the shield of novel optoelectronic devices with superior performances. In this review, the content covers the recent progress of GaN-based optoelectronic devices integrated with plasmonics and/or micro resonators, including the LEDs, photodetectors, solar cells, and light photocatalysis. The authors aim to provide an inspiring insight of recent remarkable progress and breakthroughs, as well as a promising prospect for the future highly-integrated, high speed, and efficient GaN-based optoelectronic devices.

MATLAB Simulation-Based Theoretical Study for Detection of a Wide Range of Pathogens Using 1D Defective Photonic Structure

The present 1D photonic biosensor is composed of two sub-PhCs of alternate layers made of GaP and SiO2. The period number of each PhC has been fixed to 3. Both these PhCs are joined together through a cavity region of air in which different analytes are to be filled one by one under the scope of this study. The theoretical findings of this work have been formulated with the help of the well-known transfer matrix method. Moreover, all the computations pertaining to this work have been carried out with the help of MATLAB software. The effect of change in cavity thickness and angle of incidence corresponding to a TE wave on the transmittance of the structure (AB)ND(AB)N has been studied theoretically which in turn determines the performance of the proposed biosensor. Various parameters, such as sensitivity (S), signal to noise ratio (SNR), figure of merit (FOM), resolution (RS), detection limit (LOD), quality factor (Q) and dynamic range (DR) have been theoretically calculated to evaluate the performance of the proposed design in true sense. The sensitivity of this structure varies between the highest and lowest values of 337.3626 nm/RIU and 333.0882 nm/RIU corresponding to water samples containing Pseudomonas aeruginosa cells and Bacillus anthracia cells, respectively, under normal incidence condition with a cavity thickness of 2.0 µm. The resolution (in nm) and LOD (in RIU) values of the proposed design are small enough and are significant for our structure. This study may also be helpful for distinguishing various microbiological samples under investigation and find suitable applications for discriminating bacterial cells from spores.

Detection of Reproductive Hormones in Females by Using 1D Photonic Crystal-Based Simple Reconfigurable Biosensing Design

In this manuscript, we have explored the photonic biosensing application of the 1D photonic crystal (PhC) (AB)NCDC(AB)N, which is capable of detecting reproductive progesterone and estradiol hormones of different concentration levels in blood samples of females. The proposed structure is composed of an air cavity surrounded by two buffer layers of material MgF2, which is sandwiched between two identical 1D sub PhCs (AB)N. Both sub PhCs are made up of alternate layers of materials, SiO2 and Si, of period 5. MATLAB software has been used to obtain transmission characteristics of the structure corresponding TE wave, only with the help of the transfer matrix method. The mainstay of this research is focused on the dependence of the intensity and position of the defect mode inside the photonic bandgap with respect to reproductive hormone concentrations in blood samples, change in the thickness of the cavity region and change in angle of incidence corresponding to TE wave only. The proposed design shows high sensitivity of 98.92 nm/nmol/L and 96.58 nm/nmol/L when the cavity of a thickness of 340 nm is loaded with progesterone and estradiol hormones of concentrations of 80 nmol/L and 11 nmol/L, respectively, at an incident angle of 20°. Apart from sensitivity, other parameters such as quality factor and figure of merit have also been computed to gain deep insight about the sensing capabilities of the proposed design. These findings may pave the path for the design and development of various sensing devices capable of detecting gynecological problems pertaining to reproductive hormones in females. Thus, the simple design and excellent performance makes our design most efficient and suitable for sensing applications in industrial and biomedical fields.

Chiral-Selective Tamm Plasmon Polaritons

Chiral-selective Tamm plasmon polariton (TPP) has been investigated at the interface between a cholesteric liquid crystal and a metasurface. Different from conventional TPP that occurs with distributed Bragg reflectors and metals, the chiral-achiral TPP is successfully demonstrated. The design of the metasurface as a reflective half-wave plate provides phase and polarization matching. Accordingly, a strong localized electric field and sharp resonance are observed and proven to be widely tunable.

All-dielectric unidirectional complementary media for transmission enhancement

Complementary media, possessing permittivity and permeability with the exact same magnitude but of opposite sign to their counterpart media, can optically cancel out the counterpart media. This renders fascinating applications including perfect lens, illusion optics, invisible gateway, opening up virtual holes in a wall, etc. However, the realization of complementary media generally requires metallic resonating structures, leading to challenging fabrication technology and inevitable material loss. In this work, we demonstrate a type of all-dielectric unidirectional complementary media by using symmetric dielectric multilayers. We find that such symmetric dielectric multilayers can be regarded as effective media with flexible effective permittivity and permeability, which can operate as unidirectional complementary media of almost arbitrary media including metal, air, zero-index media, etc. Based on this interesting property, we show that unidirectional wave transmission through metal films, as well as extremely impedance-mismatched zero-index media, can be greatly enhanced by using the proposed all-dielectric unidirectional complementary media. Our work opens a simple but efficient approach for transmission enhancement, that may find practical applications in transparent electrodes and tunneling WiFi signals through walls of buildings.