Nonlinear optical absorption features in few-layered hybrid Ti3C2(OH)2/Ti3C2F2 MXene for optical pulse generation in the NIR region

Two-Dimensional MXene Flakes with Large Second Harmonic Generation and Unique Surface Responses

MXenes are a family of two-dimensional (2D) materials with broad and varied applications in biology, materials science, photonics, and environmental remediation owing to their layered structure and high surface area-to-volume ratio. MXenes have exhibited significant nonlinear optical characteristics, which have been primarily explored in the context of photonics applications, yet the second-harmonic generation (SHG) behavior of MXenes remains an unexplored aspect of their optical properties. Herein, we demonstrate and quantify large second-order responses of 2D Ti3C2Tx MXenes both in aqueous solutions and on a silicon substrate for the first time. MXene flakes showed strong second-harmonic scattering (SHS) in a dilute suspension with a sensitivity of less than 0.1 μg/mL. Angle-dependent SHS experiments further found that the second-order responses originate from coherent 2D dipole radiation. Through confocal and atomic force microscopies, we found that the intense SHG signal from free-standing MXene flakes increases exponentially with decreasing thickness, while two-photon fluorescence increases linearly with thickness. The second-order susceptibility of the MXenes was determined to be 3.6 pm V-1 with a thickness of 10 nm, almost twice of that for an often-used SHG crystal, beta barium borate. We further explored surface properties of the MXene sheets by investigating the SHS responses upon addition of organic dye molecules to the system. It was found that the adsorption of crystal violet (CV) obeys a Langmuir adsorption model while the addition of malachite green (MG) resulted in almost no change in SHG intensity, even though the adsorption capacities for both CV (61.3 ± 1.7 mg/g) and MG (54.8 ± 2.8 mg/g) are similar. Such a stark difference in adsorption characteristics between cationic organic CV and MG dyes is likely due to their distinct orientational orderings on the MXene surfaces. This work opens many possibilities for the further employment of the family of 2D materials in photonics, optics, and surface catalysis applications.

Heterogeneous Ti3C2Tx MXene-MWCNT@MoS2 Film for Enhanced Long-Term Electromagnetic Interference Shielding in the Moisture Environment

MXene, as a novel two-dimensional (2D) material, has unique inherent features such as lightweight, flexibility, high electrical conductivity, customizable surface chemistry, and facile solution processability. However, utilizing MXene (Ti3C2Tx) films for long-term electromagnetic interference (EMI) shielding poses challenges, as they are susceptible to chemical deterioration through oxidation into TiO2. In this work, an ultrathin heterogeneous film of Ti3C2Tx MXene integrated with multiwalled carbon nanotubes supporting MoS2 clusters (MXene/MWCNT@MoS2) was developed. The heterogeneous film with 15 wt % of MWCNT@MoS2 clusters exhibited improved EMI shielding performance such as the highest EMI shielding effectiveness of 50 dB and the specific shielding effectiveness of 20,355 dB cm2 g -1, mainly attributed to the excellent electrical conductivity, distinctive porous structure, and multiple interfacial interactions. The heterogeneous films underwent extended exposure to a moisture environment (35 days), and their structural stability and EMI shielding performance were enhanced by the integration of MWCNT@MoS2 clusters. As a result, the engineered heterostructure of multilayered hybrid films holds promise as a viable option for improving the EMI shielding effectiveness and stability of Ti3C2Tx MXene.

Nonlinear Optical Modulation Characteristics of MXene Cr2C for 2 μm Pulsed Lasers

MXene materials have shown numerous useful mechanical and electronic properties, and have been found to possess nice potential in the field of optical modulation. Here, we fabricated a MXene Cr₂C saturable absorber by the liquid-phase exfoliation method, and systemically analyzed the surface morphology and nonlinear properties of the Cr₂C sample. Applying the Cr₂C saturable absorber as a Q-switch in a thulium-doped yttrium aluminum perovskite (Tm: YAP) laser, the shortest single pulse was obtained with a width of 602 ns under an absorbed pump power of 3.3 W at a repetition rate of 55 kHz with a T = 1% output coupler. The maximum output power was obtained with a T = 5% output coupler at a repetition rate of 58 kHz. The obtained maximum pulse energy and peak power were 3.96 μJ and 4.36 W, separately, which reveal that the MXene Cr₂C can be applied as a promising modulation material in the near-infrared pulsed lasers.

Visible and Near-Infrared Broadband Absorber Based on Ti3C2Tx MXene-Wu

A high absorption broadband absorber based on MXene and tungsten nanospheres in visible and near-infrared bands is proposed. The absorber has a maximum absorption of 100% and an average absorption of 95% in the wavelength range of 400-2500 nm. The theoretical mechanism and parameter adjustability of the absorber are analyzed by FDTD solutions. The results show that the structural parameters can effectively adjust the absorption performance. The good absorption performance is due to the action of the local surface plasmon resonance coupling with the gap surface plasmon resonance and Fabry-Perot resonance. The simulation results show that the absorber is insensitive to the polarization and oblique incidence angle of incident light, and that high absorption and broadband can be maintained when the oblique incidence angle is up to 60°.

Optical Crystals for 1.3 μm All-Solid-State Passively Q-Switched Laser

In recent years, optical crystals for 1.3 μm all-solid-state passively Q-switched lasers have been widely studied due to their eye-safe band, atmospheric transmission characteristics, compactness, and low cost. They are widely used in the fields of high-precision laser radar, biomedical applications, and fine processing. In this review, we focus on three types of optical crystals used as the 1.3 μm laser gain media: neodymium-doped vanadate (Nd:YVO4, Nd:GdVO4, Nd:LuVO4, neodymium-doped aluminum-containing garnet (Nd:YAG, Nd:LuAG), and neodymium-doped gallium-containing garnet (Nd:GGG, Nd:GAGG, Nd:LGGG). In addition, other crystals such as Nd:KGW, Nd:YAP, Nd:YLF, and Nd:LLF are also discussed. First, we introduce the properties of the abovementioned 1.3 μm laser crystals. Then, the recent advances in domestic and foreign research on these optical crystals are summarized. Finally, the future challenges and development trend of 1.3 μm laser crystals are proposed. We believe this review will provide a comprehensive understanding of the optical crystals for 1.3 μm all-solid-state passively Q-switched lasers.

Switching the Nonlinear Optical Absorption of Titanium Carbide MXene by Modulation of the Surface Terminations

Surface terminations of two-dimensional materials should have a strong influence on the nonlinear optical (NLO) properties, but the relationship between surface terminations and NLO properties has not yet been reported. In this work, switching the NLO properties of MXenes (Ti₃C₂T_x) via "surface terminations modulation" is explored. The surface terminations of Ti₃C₂T_x are modulated by electrochemical treatment, resulting in different states (viz., Ti₃C₂T_x(pristine), Ti₃C₂T_x(═O rich), and Ti₃C₂T_x(-OH rich)). The sign and magnitude of the effective NLO absorption coefficient (β_eff) change with the surface terminations. Ti₃C₂T_x(═O rich) shows a relatively large saturable absorption (SA) with laser excitation at 515 nm (β_eff = -1020 ± 136.2 cm GW^-1), while reverse saturable absorption (RSA) is found in Ti₃C₂T_x(pristine) and Ti₃C₂T_x(-OH rich). The RSA of Ti₃C₂T_x(pristine) and Ti₃C₂T_x(-OH rich) is attributed to excited-state absorption, while the SA of Ti₃C₂T_x(═O rich) is associated with Pauli blocking. With laser excitation at 800 nm, the β_eff of Ti₃C₂T_x(-OH rich) is 113 ± 3.2 cm GW^-1, 1.68 times that of Ti₃C₂T_x(pristine); the RSA is caused by photon-induced absorption. Our results reveal a correlation between surface terminations and NLO properties, highlighting the potential of MXenes in photoelectronics.

MXenes: synthesis, incorporation, and applications in ultrafast lasers

The rapid expansion of nanotechnology and material science prompts two-dimensional (2D) materials to be extensively used in biomedicine, optoelectronic devices, and ultrafast photonics. Owing to the broadband operation, ultrafast recovery time, and saturable absorption properties, 2D materials become the promising candidates for being saturable absorbers in ultrafast pulsed lasers. In recent years, the novel 2D MXene materials have occupied the forefront due to their superior optical and electronic, as well as mechanical and chemical properties. Herein, we introduce the fabrication methods of MXenes, incorporation methods of combining 2D materials with laser cavities, and applications of ultrafast pulsed lasers based on MXenes. Firstly, top-down and bottom-up approaches are two types of fabrication methods, where top-down way mainly contains acid etching and the chief way of bottom-up method is chemical vapor deposition. In addition to these two typical ones, other methods are also discussed. Then we summarize the advantages and drawbacks of these approaches. Besides, commonly used incorporation methods, such as sandwich structure, optical deposition, as well as coupling with D-shaped, tapered, and photonic crystal fibers are reviewed. We also discuss their merits, defects, and conditions of selecting different methods. Moreover, we introduce the state of the art of ultrafast pulsed lasers based on MXenes at different wavelengths and highlight some excellent output performance. Ultimately, the outlook for improving fabrication methods and applications of MXene-based ultrafast lasers is presented.

MXene/Graphene Oxide Heterojunction as a Saturable Absorber for Passively Q-Switched Solid-State Pulse Lasers

Owing to their unique characteristics, two-dimensional (2-D) materials and their complexes have become very attractive in photoelectric applications. Two-dimensional heterojunctions, as novel 2-D complex materials, have drawn much attention in recent years. Herein, we propose a 2-D heterojunction composed of MXene (Ti₂CT_x) materials and graphene oxide (GO), and apply it to an Nd:YAG solid-state laser as a saturable absorber (SA) for passive Q-switching. Our results suggest that a nano-heterojunction between MXene and GO was achieved based on morphological characterization, and the advantages of a broadband response, higher stability in GO, and strong interaction with light waves in MXene could be combined. In the passively Q-switched laser study, the single-pulse energy was measured to be approximately 0.79 µJ when the pump power was 3.72 W, and the corresponding peak power was approximately 7.25 W. In addition, the generation of a stable ultrashort pulse down to 109 ns was demonstrated, which is the narrowest pulse among Q-switched solid-state lasers using a 2-D heterojunction SA. Our work indicates that the MXene–GO nano-heterojunction could operate as a promising SA for ultrafast systems with ultrahigh pulse energy and ultranarrow pulse duration. We believe that this work opens up a new approach to designing 2-D heterojunctions and provides insight into the formation of new 2-D materials with desirable photonic properties.

Ti2CTx MXene as a Saturable Absorber for Passively Q-Switched Solid-State Lasers

In this work, we successfully fabricated a transmissive saturable absorber (SA) with Ti₂CT_x MXene using the spin-coating method. By inserting the Ti₂CT_x saturable absorber into the diode-pumped solid-state (DPSS) Nd:YAG laser, a stable passively Q-switched operation was obtained near 1.06 μm. At a pump power of 4.5 W, we obtained the shortest pulse duration of 163 ns with a repetition rate of 260 kHz. The corresponding single pulse energy and peak pulse power were 3.638 μJ and 22.3 W, respectively. The slope efficiency and the optical conversion efficiency of the laser were 21% and 25.5%, respectively. To the best of our knowledge, this is the first time that Ti₂CT_x was used in the passively Q-switched solid-state lasers. This work demonstrates that Ti₂CT_x can be a promising saturable absorber for solid-state laser pulse generation.