Plasmonic sensor based on offset-splicing and waist-expanded taper using multicore fiber for detection of Aflatoxins B1 in critical sectors

Sensitive surface plasmon resonance biosensor by optimized carboxylate functionalized carbon nanotubes/chitosan for amlodipine detecting

The adoption of biophotonic sensing technologies holds significant promise for application in health care and biomedical industries in all aspects of human life. Then, this piece of writing employs the powerful effective medium theory and FDTD simulation to anticipate the most favorable state and plasmonic attributes of a magnificent nanocomposite, comprising carboxylate functionalized carbon nanotubes and chitosan (CS). Furthermore, it thoroughly explores the exhibited surface plasmon resonance behaviors of this composite versus the quantity of CS variation. Subsequently, enlightening simulations are conducted on the nanocomposite with a delicate layer and a modified golden structure integrating as a composite. The intricate simulations eventually unveil an optimal combination to pave the way for crafting an exceptional specific biosensor that far surpasses its counterpart as a mere Au thin layer in terms of excellence. The proposed biosensor demonstrated linear behavior across a wide range from 0.01 μM to 150 μM and achieved a detection limit of 10 nM, with a sensitivity of 134◦RIU-1.

Highly sensitive detection of low-concentration sodium chloride solutions based on a gold-coated prism in Kretschmann setup

A gold-coated Kretschmann setup has been constructed and explored as a surface plasmon resonance (SPR) platform, specifically tailored for the detection of low-concentration sodium chloride (NaCl) solutions. The setup employs a BK7 prism coated with a 50 nm gold layer, serving as a plasmonic layer, to induce resonance. This resonance arises from the interplay between light waves and free electrons propagating at the interface of two media. The experimental findings reveal a notable resonance angle shift of 10° when the NaCl concentration is varied from 0 to 2.5 %. Furthermore, angle interrogation provides insightful details about the sensor's response to changes in the refractive index, showcasing a commendable sensitivity of 2400°/RIU, a high level of linearity at 0.9771, and an impressive resolution of 0.217 %. The demonstrated capabilities of this sensor underscore its potential for widespread applications, particularly in the monitoring of salt concentration across diverse domains such as seawater analysis, food processing, and fermentation processes. The robust performance and precision of this proposed sensor position it as a valuable tool with promising prospects for addressing the needs of various industries dependent on accurate salt concentration measurements.

Probiotic fermentation environment control under intelligent data monitoring

Probiotic fermentation studies are vital in many areas, particularly when it comes to feeding applications. This work examines probiotic fermentation in oil tea crops. The assessment of tea saponin-degrading bacteria and optimization of fermentation conditions using fermented oil tea cake under natural conditions, screening out six strains with strong ability to degrade tea saponin; selection of the best tea saponin degradation strain L.2 and recognition of its morphological features and ITS sequence to obtain L.2 strain is Aspergillus Niger. Oil tea is rich in tea saponin. Aspergillus Niger degraded tea saponins in oil teacakes at a rate of 93.96 % under the ideal conditions of 31.3 oC, 103.5 h, and 4.57 mL of initial acid addition. This has been accomplished via solid-state fermentation of L.2 using single factor studies and surface response optimization experiments. Moreover, Aspergillus Niger degraded tea saponins in oil tea cakes at a rate of 93.96% at the ideal circumstances of 31.3 C, 103.5 h, and 4.57 mL of initial acid addition.

Involvement of E3 ubiquitin ligase NEDD4-mediated YY1 ubiquitination in alleviating idiopathic pulmonary fibrosis

Idiopathic pulmonary fibrosis (IPF) is a chronic and lethal lung disease characterized by progressive lung scarring. This study aims to elucidate the role of the E3 ubiquitin ligase NEDD4 in the ubiquitination of YY1 and its subsequent impact on TAB1 transcription, revealing a possible molecular mechanism in the development of IPF. Through bioinformatics analysis and both in vitro and in vivo experiments, we observed differential expression levels of NEDD4 and YY1 between normal and IPF samples, identifying NEDD4 as an upstream E3 ubiquitin ligase of YY1. Furthermore, binding sites for the transcription factor YY1 on the promoter region of TAB1 were discovered, indicating a direct interaction. In vitro experiments using HEPF cells showed that NEDD4 mediates the ubiquitination and degradation of YY1, leading to suppressed TAB1 transcription, thereby inhibiting cell proliferation and fibrogenesis. These findings were corroborated by in vivo experiments in an IPF mouse model, where the ubiquitination pathway facilitated by NEDD4 attenuated IPF progression through the downregulation of YY1 and TAB1 transcription. These results suggest that NEDD4 plays a crucial role in the development of IPF by modulating YY1 ubiquitination and TAB1 transcription, providing new insights into potential therapeutic targets for treating IPF.

Characterization of a group of germacrene A synthases involved in the biosynthesis of β-elemene from Atractylodis macrocephala

β-Elemene, an important component of the volatile oil of Atractylodis macrocephala, has been widely utilized as an antitumor drug for over 20 years. However, the germacrene A synthase (GAS) genes responsible for the biosynthesis of β-elemene in A. macrocephala were previously unidentified. In this study, two new AmGASs were identified from the A. macrocephala transcriptome, demonstrating their capability to convert farnesyl pyrophosphate into germacrene A, which subsequently synthesizes β-elemene through Cope rearrangement. Additionally, two highly catalytic AmGAS1 mutations, I307A and E392A, resulted in a 2.23-fold and 1.57-fold increase in β-elemene synthesis, respectively. Furthermore, precursor supply and fed-batch strategies were employed to enhance the precursor supply, resulting in β-elemene yields of 7.3 mg/L and 33.3 mg/L, respectively. These findings identify a promising candidate GAS for β-elemene biosynthesis and lay the foundation for further functional studies on terpene synthases in A. macrocephala.

Self-powered optical fiber biosensor integrated with enzymes for non-invasive glucose sensing

To alleviate the discomfort associated with frequent blood glucose detection in diabetic patients, a novel non-invasive tear glucose biosensor has been developed. This involved the design and preparation of a photoelectrochemical probe based on an optical fiber and biological enzymes. One end of the optical fiber connects to a light source, acting as an energy source and imparting, self-powered capability to the biosensor. The opposite end is loaded with nanomaterials and glucose oxidase, designed for insertion into the sample to realize photoelectrochemical sensing. This innovative configuration not only improves the integration of the biosensor but is also suitable for analyzing minuscule voluminal samples. The results show that the proposed biosensor exhibits a linear range from 10 nM to 100 μM, possesses a low detection limit of 4.1 nM and a short response time of 0.7 s. Benefiting from the high selectivity of the enzyme, the proposed biosensor demonstrates excellent resistance to the interference of common tear components. In summary, this work provides a more effective method for non-invasive glucose detection and affords valuable ideas for the design and fabrication of non-invasive and self-powered biosensors.

Development of a biophotonic fiber sensor using direct-taper and anti-taper techniques with seven-core and four-core fiber for the detection of doxorubicin in cancer treatment

Doxorubicin (DOX) is an important drug for cancer treatment, but its clinical application is limited due to its toxicity and side effects. Therefore, detecting the concentration of DOX during treatment is crucial for enhancing efficacy and reducing side effects. In this study, the authors developed a biophotonic fiber sensor based on localized surface plasmon resonance (LSPR) with the multimode fiber (MMF)-four core fiber (FCF)-seven core fiber (SCF)-MMF-based direct-taper and anti-taper structures for the specific detection of DOX. Compared to other detection methods, it has the advantages of high sensitivity, low cost, and strong anti-interference ability. In this experiment, multi-walled carbon nanotubes (MWCNTs), cerium-oxide nanorods (CeO2-NRs), and gold nanoparticles (AuNPs) were immobilized on the probe surface to enhance the sensor's biocompatibility. MWCNTs and CeO2-NRs provided more binding sites for the fixation of AuNPs. By immobilizing AuNPs on the surface, the LSPR was stimulated by the evanescent field to detect DOX. The sensor surface was functionalized with DOX aptamers for specific detection, enhancing its specificity. The experiments demonstrated that within a linear detection range of 0-10 µM, the sensitivity of the sensor is 0.77 nm/µM, and the limit of detection (LoD) is 0.42 µM. Additionally, the probe's repeatability, reproducibility, stability, and selectivity were evaluated, indicating that the probe has high potential for detecting DOX during cancer treatment.

See farther and more: a master-slave UAVs based synthetic optical aperture imaging system with wide and dynamic baseline

An open challenge remained in designing an optical system to capture the aerial image with a wide field of view (FoV) and high resolution. The optical system of one camera from a single unmanned aerial vehicle (UAV) can hardly promise the FoV and resolution. The conventional swarm UAVs can form the camera array with a short or fixed baseline. They can capture the images with a wide FoV and high resolution, but the cost is the requirement of many UAVs. We aim to design a camera array with a wide and dynamic baseline to reduce the demand for UAVs to organize a synthetic optical aperture. In this thought, we propose a master-slave UAVs-based synthetic optical aperture imaging system with a wide and dynamic baseline. The system consists of one master UAV and multiple slave UAVs. Master and slave UAVs provide the global and local FoVs, respectively, and improve the efficiency of image acquisition. In such a system, fusing UAV images becomes a new challenge due to two factors: (i) the small FoV overlap of slave UAVs and (ii) the gap in resolution scale from slave to master UAV images. To deal with it, a coarse-to-fine stitching method is proposed to stitch up the multi-view images into one to obtain a wide FoV with high resolution. A video stabilization method has also been designed for the proposed imaging system. Challenges caused by wide and dynamic baselines can thus be solved by the above methods. Actual data experiments demonstrate that the proposed imaging system achieves high-quality imaging results.

An Electrochemical Immunosensor Based on Chitosan-Graphene Nanosheets for Aflatoxin B1 Detection in Corn

We reported a highly efficient electrochemical immunosensor utilizing chitosan-graphene nanosheets (CS-GNs) nanocomposites for the detection of aflatoxin B1 (AFB1) in corn samples. The CS-GNs nanocomposites, serving as a modifying layer, provide a significant specific surface area and biocompatibility, thereby enhancing both the electron transfer rate and the efficiency of antibody immobilization. The electrochemical characterization was conducted utilizing both differential pulse voltammetry (DPV) and electrochemical impedance spectroscopy (EIS). Moreover, the antibody concentration, pH, antibody immobilization time, and immunoreaction time, were optimized. The results showed that the current change (ΔI) before and after the immunoreaction demonstrated a strong linear relationship (R2=0.990) with the AFB1 concentration, as well as good specificity and stability. The linear range extended from 0.05 to 25 ng/mL, with a detection limit of 0.021 ng/mL (S/N=3). The immunosensor exhibited a recovery rate ranging from 97.3% to 101.4% in corn samples, showing a promising performance using an efficient method, and indicating a remarkable prospect for the detection of fungal toxins in grains.

Matrix metalloproteinases as attractive therapeutic targets for chronic pain: A narrative review

Chronic pain constitutes an abnormal pain state that detrimentally affects the quality of life, daily activities, occupational performance, and stability of mood. Despite the prevalence of chronic pain, effective drugs with potent abirritation and minimal side effects remain elusive. Substantial studies have revealed aberrant activation of the matrix metalloproteinases (MMPs) in multiple chronic pain models. Additionally, emerging evidence has demonstrated that the downregulation of MMPs can alleviate chronic pain in diverse animal models, underscoring the unique and crucial role of MMPs in different stages and types of chronic pain. This review delves into the mechanistic insights and roles of MMPs in modulating chronic pain. The aberrant activation of MMPs has been linked to neuropathic pain through mechanisms involving myelin abnormalities in peripheral nerve and spinal dorsal horn (SDH), hyperexcitability of dorsal root ganglion (DRG) neurons, activation of N-methyl-d-aspartate receptors (NMDAR) and Ca2+-dependent signals, glial cell activation, and proinflammatory cytokines release. Different MMPs also contribute significantly to inflammatory pain and cancer pain. Furthermore, we summarized the substantial therapeutic potential of MMP pharmacological inhibitors across different types of chronic pain. Overall, our findings underscore the promising therapeutic prospects of MMPs targeting for managing chronic pain.

Unraveling the allosteric mechanisms of prolyl endopeptidases for celiac disease therapy: Insights from molecular dynamics simulations

Prolyl endopeptidases (PEP) from Sphingomonas capsulata (sc) and Myxococcus xanthus (mx) selectively degrade gluten peptides in vitro, offering a potential therapeutic strategy for celiac disease. However, the mechanisms governing the interaction of these enzymes with their substrates remain unclear. In this study, conventional molecular dynamics simulations with a microsecond timescale and targeted molecular dynamics simulations were performed to investigate the native states of mxPEP and scPEP enzymes, as well as their allosteric binding with a representative substrate, namely, Z-Ala-Pro-p-nitroanilide (pNA). The simulations reveal that the native scPEP is in an open state, while the native mxPEP is in a closed state. When pNA approaches a closed mxPEP, it binds to an allosteric pocket located at the first and second β-sheet of the β-propeller domain, inducing the opening of this enzyme. Neither enzyme is active in the open or partly-open states. Enzymatic activity is enabled only when the catalytic pocket in the closed state fully accommodates the substrates. The internal capacity of the catalytic pocket of PEP in the closed state determines the maximum size of the gluten peptides that the enzymes can catalyze. The present work provides essential molecular dynamics information for the redesign or engineering of PEP enzymes.

A highly sensitive optical fiber sensor enables rapid triglycerides-specific detection and measurement at different temperatures using convolutional neural networks

For specific recognition and sensitive detection of triglycerides (TGs), an optical fiber sensor (OFS) based on an enhanced core diameter mismatch was proposed. The sensitivity of the sensor is significantly increased due to the repetitive excitation of the higher-order cladding modes. A technique for immobilizing lipase using covalent binding technology was presented and demonstrated by Fourier transform infrared (FTIR) spectroscopy and scanning electron microscopy. The interference dip of the sensor was shifted due to TGs being hydrolyzed in the presence of lipase. The sensor shows an optimal response within 3 min and exhibits a high sensitivity of 0.9933 nm/(mg/ml) and a limit of detection of 0.0822 mg/ml in the concentration range 0-8 mg/ml at a temperature of 37 °C and a pH of 7.4. The response of the sensor to TGs concentration at different temperatures and pH was investigated. The reproducibility, reusability, and stability of the proposed sensor were tested and verified experimentally. The biosensor is highly specific for TGs and unaffected by many other interfering substances. Further, the measurement of TGs concentration at different temperatures was realized. This method provides a new way to detect TGs rapidly and reliably and has potential applications in medical research and clinical diagnosis.

Signal-enhanced multi-core fiber-based WaveFlex biosensor for ultra-sensitive xanthine detection

In this work, we introduce a novel multimode fiber (MMF) - seven core fiber (SCF) - MMF (MCM) optical fiber biosensor, also known as the WaveFlex biosensor (plasma wave assisted fiber biosensor), based on localized surface plasmon resonance (LSPR) for qualitative detection of xanthine. Xanthine is a purine base widely distributed in human blood and tissues, and commonly used as an indicator for various disease detections. The MCM sensor incorporates a tapered optical fiber structure, fabricated using the combiner manufacturing system (CMS), and is designed with SCF and MMF. By effectively harnessing LSPR, the sensor boosts the attachment points of biomolecules on the probe surface through immobilized tungsten disulfide (WS2)-thin layers, gold nanoparticles (AuNPs), and carbon nitride quantum dots (C3N-QDs). The functionalization of xanthine oxidase (XO) on the sensing probe further enhances the sensor's specificity. The proposed WaveFlex biosensor exhibits a remarkable sensitivity of 3.2 nm/mM and a low detection limit of 96.75 µM within the linear detection range of 100 - 900 µM. Moreover, the sensor probe demonstrates excellent reusability, reproducibility, stability, and selectivity. With its sensitivity, biocompatibility, and immense potential for detecting human serum and fish products, this WaveFlex biosensor presents a promising platform for future applications.

WaveFlex biosensor based on S-tapered and waist-expanded technique for detection of glycosylated hemoglobin

Glycosylated hemoglobin (HbA1c) is considered a new standard for the detection of diabetes mellitus because it is more accurate than regular blood sugar tests and there is no need to take blood on an empty stomach or at a specific time. In this work, we have developed a novel optical fiber biosensor, referred to as the "WaveFlex biosensor," which operates on the principles of localized surface plasmon resonance (LSPR) plasmonic wave. The sensor is fabricated using an innovative S-tapered and waist-expanded technique, enabling it to effectively detect HbA1c. Compared to the HbA1c sensors currently in use, HbA1c optical fiber sensors possess the characteristics of high sensitivity, low cost, and strong anti-interference ability. The gold nanoparticles (AuNPs), cerium oxide (CeO2) nanorods (NRs), and tungsten disulfide (WS2) nanosheets (NSs) are functionalized to improve the effectiveness of the fiber sensor on the probe surface. AuNPs are utilized to generate LSPR by the excitation of evanescent waves to amplify the sensing signal. The CeO2-NRs can have a strong metal-carrier interaction with AuNPs, enhancing the cascade of CeO2-NRs and AuNPs. The WS2-NSs with layered fold structure have a large specific surface area. Therefore, the combination of CeO2-NRs and WS2-NSs is conducive to the binding of antibodies and the addition of sites. The functionalized antibodies on the fiber make the sensor probe capable of specific selection. The developed probe is applied to test the HbA1c solution over concentrations of 0-1000 µg/mL, and the sensitivity and limits of detection of 1.195×10-5 a.u./(µg/mL) and 1.66 µg/mL are obtained, respectively. The sensor probe is also evaluated using assays for reproducibility, reusability, selectivity, and pH. According to the findings, a novel method for detecting blood glucose based on a plasmonic biosensor is proposed.

Advances in Tapered Optical Fiber Sensor Structures: From Conventional to Novel and Emerging

Optical fiber sensors based on tapered optical fiber (TOF) structure have attracted a considerable amount of attention from researchers due to the advantages of simple fabrication, high stability, and diverse structures, and have great potential for applications in many fields such as physics, chemistry, and biology. Compared with conventional optical fibers, TOF with their unique structural characteristics significantly improves the sensitivity and response speed of fiber-optic sensors and broadens the application range. This review presents an overview of the latest research status and characteristics of fiber-optic sensors and TOF sensors. Then, the working principle of TOF sensors, fabrication schemes of TOF structures, novel TOF structures in recent years, and the growing emerging application areas are described. Finally, the development trends and challenges of TOF sensors are prospected. The objective of this review is to convey novel perspectives and strategies for the performance optimization and design of TOF sensors based on fiber-optic sensing technologies.

Multi-functional dual-path self-aligned polarization interference lithography

Manufacturing sharp features is one of the most desired requirements for lithography. Here, we demonstrate a dual-path self-aligned polarization interference lithography (Dp-SAP IL) for fabricating periodic nanostructures, featuring high-steepness and high-uniformization. Meanwhile, it can manufacture quasicrystals with adjustable rotation symmetry. We reveal the change of the non-orthogonality degree under different polarization states and incident angles. We find that incident light's transverse electric (TE) wave results in high interference contrast at arbitrary incident angles, with a minimum contrast of 0.9328, that is, realizing the self-alignment of the polarization state of incident light and reflected light. We experimentally demonstrate this approach by fabricating a series of diffraction gratings with periods ranging from 238.3 nm to 851.6 nm. The steepness of each grating is greater than 85 degrees. Different from the traditional interference lithography system, Dp-SAP IL realizes a structure color using two mutually perpendicular and non-interference paths. One path is for the photolithography of patterns onto the sample, and the other path is for generating nanostructures on the patterns. Our technique showcases the feasibility of obtaining high contrast interference fringes by simply tuning the polarization, with the potential for cost-effective manufacturing of nanostructures such as quasicrystals and structure color.

Dynamics of surface-plasmon lasing in planar metal gratings on semiconductor

We investigate the dynamics of surface plasmon (SP) lasing in Au gratings fabricated on InGaAs with a period of around 400 nm, which locates the SP resonance near the semiconductor energy gap and facilitates efficient energy transfer. By optically pumping the InGaAs to reach the population inversion required for the amplification and the lasing, we observe SP lasing at specific wavelengths that satisfy the SPR condition depending on the grating period. The carrier dynamics in semiconductor and the photon density in the SP cavity was investigated from the time-resolved pump-probe measurement and the time resolved photoluminescence spectroscopy, respectively. Our results reveal that the photon dynamics is strongly correlated with the carrier dynamics and the lasing build-up is accelerated as the initial gain proportional to the pumping power increases, and this trend is satisfactorily explained using the rate equation model.

Experimental research of 13-core 5-LP mode fiber with high doped graded-index core and stairway-index trench

A graded-index 13-core 5-LP mode fiber with high doped core and stairway-index trench structure have been successfully prepared by Hole-drilling method and Plasma vapor deposition. This fiber has 104 spatial channels, realizing large capacity information transmission. By building an experimental platform, the 13-core 5-LP mode fiber have been tested and characterized. The core can stably transmit 5 LP modes. The transmission loss is lower than 0.5 dB/km. Inter-core crosstalk (ICXT) of each layer of core is analyzed in detail. The ICXT can be less than -30 dB/100 km. The test results show that this fiber can stably transmit 5 LP modes, and has the characteristics of low loss and low crosstalk, realizing large capacity transmission. This fiber provides a solution to the issue of limited fiber capacity.

Wearable Smart Bandage-Based Bio-Sensors

Bandage is a well-established industry, whereas wearable electronics is an emerging industry. This review presents the bandage as the base of wearable bioelectronics. It begins with introducing a detailed background to bandages and the development of bandage-based smart sensors, which is followed by a sequential discussion of the technical characteristics of the existing bandages, a more practical methodology for future applications, and manufacturing processes of bandage-based wearable biosensors. The review then elaborates on the advantages of basing the next generation of wearables, such as acceptance by the customers and system approvals, and disposal.

Microfluidic immunosensor based on a graphene oxide functionalized double helix microfiber coupler for anti-Müllerian hormone detection

A label-free microfluidic immunosensor based on the double helix microfiber coupler (DHMC) coated with graphene oxide (GO) was proposed for the specific detection of anti-Müllerian hormone (AMH). Two single-mode optical fibers were twisted in a parallel direction, the coning machine was used to fuse and taper them, and the high-sensitivity DHMC was obtained. To make a stable sensing environment, it was immobilized in a microfluidic chip. And then, the DHMC was modified by GO and bio-functionalized by the AMH monoclonal antibodies (anti-AMH MAbs) for the specific detection of AMH. The experimental results showed that the detection range of the immunosensor for AMH antigen solutions was 200 fg/mL∼50 µg/mL, the detection of limit (LOD) was ∼235.15 fg/mL, and the detection sensitivity and the dissociation coefficient were ∼3.518 nm/(log(mg/mL)) and ∼1.85 × 10 ^{- 12} M, respectively. The alpha fetoprotein (AFP), des-carboxy prothrombin (DCP), growth stimulation expressed gene 2 (ST2) and AMH serum were used to confirm the excellent specific and clinical properties of the immunosensor, showing that the proposed immunosensor was easy-made and can be potentially applied in the biosensing field.

A high-sensitivity single-light-source triaxial atomic magnetometer with double-cell and orthogonally pumped structure

We first report a single-light-source orthogonally pumped triaxial atomic magnetometer with a double-cell structure. By using a beam splitter to equally allocate the pump beam, the proposed triaxial atomic magnetometer is responsive to magnetic fields in all three directions, and without sacrificing system sensitivity. The experimental results indicate that, the magnetometer achieves a sensitivity of 22 fT/Hz^1/2 in x-direction with a 3-dB bandwidth of 22 Hz, a sensitivity of 23 fT/Hz^1/2 in y-direction with a 3-dB bandwidth of 23 Hz, and a sensitivity of 21 fT/Hz^1/2 in z-direction with a 3-dB bandwidth of 25 Hz. This magnetometer is useful for the applications that require the measurements of the three components of the magnetic field.