Fluorescence lifetime system for microscopy and multiwell plate imaging with a blue picosecond diode laser

A Point-of-Care Device for Molecular Diagnosis Based on CMOS SPAD Detectors with Integrated Microfluidics

We describe the integration of techniques and technologies to develop a Point-of-Care for molecular diagnosis PoC-MD, based on a fluorescence lifetime measurement. Our PoC-MD is a low-cost, simple, fast, and easy-to-use general-purpose platform, aimed at carrying out fast diagnostics test through label detection of a variety of biomarkers. It is based on a 1-D array of 10 ultra-sensitive Single-Photon Avalanche Diode (SPAD) detectors made in a 0.18 μm High-Voltage Complementary Metal Oxide Semiconductor (HV-CMOS) technology. A custom microfluidic polydimethylsiloxane cartridge to insert the sample is straightforwardly positioned on top of the SPAD array without any alignment procedure with the SPAD array. Moreover, the proximity between the sample and the gate-operated SPAD sensor makes unnecessary any lens or optical filters to detect the fluorescence for long lifetime fluorescent dyes, such as quantum dots. Additionally, the use of a low-cost laser diode as pulsed excitation source and a Field-Programmable Gate Array (FPGA) to implement the control and processing electronics, makes the device flexible and easy to adapt to the target label molecule by only changing the laser diode. Using this device, reliable and sensitive real-time proof-of-concept fluorescence lifetime measurement of quantum dot Qdot^TM 605 streptavidin conjugate is demonstrated.

Time-domain fluorescent plate reader for cell based protein-protein interaction and protein conformation assays

Fluorescence lifetime measurement is widely used in the biological sciences due to its inherent sensitivity and concentration independence. Frequency domain high-throughput plate readers and time-resolved energy transfer (TRET) plate readers are in common use and have been successful in a variety of applications ranging from basic biochemistry to drug discovery. Time-domain systems would have advantages due to their ability to distinguish both FRETing and non-FRETing populations, but have been difficult to develop due to inherent difficulties with background autofluorescence and lifetime component separation. Using a modified commercial lifetime plate reader, we demonstrate a method for removal of the complex auto-fluorescent background decay, described using a stretched exponential function (StrEF). We develop a generalized multi-exponential fitting algorithm (GeMEF), which progressively accounts for confounding lifetime components in FRET-based assays using a series of control experiments. We demonstrate the separability of FRET strength and efficiency and apply the technique to protein-protein interactions and protein conformational assays in a cell-based format. Presenilin 1 (PS1) is known to be important in Amyloid Precursor Protein (APP) processing in Alzheimer's disease. Using transfected cells, we demonstrate APP-PS1 interactions by FRET in a cell-based, 96-well plate format.

Innovating lifetime microscopy: a compact and simple tool for life sciences, screening, and diagnostics

Fluorescence lifetime imaging microscopy (FLIM) allows the investigation of the physicochemical environment of fluorochromes and protein-protein interaction mapping by Forster resonance energy transfer (FRET) in living cells. However, simpler and cheaper solutions are required before this powerful analytical technique finds a broader application in the life sciences. Wide-field frequency-domain FLIM represents a solution whose application is currently limited by the need for multichannel-plate image intensifiers. We recently showed the feasibility of using a charge-coupled device/complementory metal-oxide semiconductor (CCD/CMOS) hybrid lock-in imager, originally developed for 3-D vision, as an add-on device for lifetime measurements on existing wide-field microscopes. In the present work, the performance of the setup is validated by comparison with well-established wide-field frequency-domain FLIM measurements. Furthermore, we combine the lock-in imager with solid-state light sources. This results in a simple, inexpensive, and compact FLIM system, operating at a video rate and capable of single-shot acquisition by virtue of the unique parallel retrieval of two phase-dependent images. This novel FLIM setup is used for cellular and FRET imaging, and for high-throughput and fast imaging applications. The all-solid-state design bridges the technological gap that limits the use of FLIM in areas such as drug discovery and medical diagnostics.

UV Fluorescence Lifetime Imaging Microscopy: A Label-Free Method for Detection and Quantification of Protein Interactions

Due to the ability to detect multiple parameters simultaneously, protein microarrays have found widespread applications from basic biological research to diagnosis of diseases. Generally, readout of protein microarrays is performed by fluorescence detection using either dye-labeled detector antibodies or direct labeling of the target proteins. We developed a method for the label-free detection and quantification of proteins based on time-gated, wide-field, camera-based UV fluorescence lifetime imaging microscopy to gain lifetime information from each pixel of a sensitive CCD camera. The method relies on differences in the native fluorescence lifetime of proteins and takes advantage of binding-induced lifetime changes for the unequivocal detection and quantification of target proteins. Since fitting of the fluorescence decay for every pixel in an image using a classical exponential decay model is time-consuming and unstable at very low fluorescence intensities, we used a new, very robust and fast alternative method to generate UV fluorescence lifetime images by calculating the average lifetime of the decay for each pixel in the image stack using a model-free average decay time algorithm.To validate the method, we demonstrate the detection and quantification of p53 antibodies, a tumor marker in cancer diagnosis. Using tryptophan-containing capture peptides, we achieved a detection sensitivity for monoclonal antibodies down to the picomolar concentration range. The obtained affinity constant, Ka, of (1.4 +/- 0.6) x 10(9) M(-1), represents a typical value for antigen/antibody binding and is in agreement with values determined by traditional binding assays.

3D-resolved investigation of the pH gradient in artificial skin constructs by means of fluorescence lifetime imaging

PURPOSE

The development of substitutes for the human skin, e.g., artificial skin constructs (ASCs), is of particular importance for pharmaceutical and dermatologic research because they represent economical test samples for the validation of new drugs. In this regard, it is essential for the skin substitutes to be reliable models of the genuine skin, i.e., to have similar morphology and functionality. Particularly important is the barrier function, i.e., the selective permeability of the skin, which is strongly related to the epidermal pH gradient. Because the pH significantly influences the permeation profile of ionizable drugs such as nonsteroidal anti-inflammatory drugs, it is of major importance to quantitatively measure the epidermal pH gradient of the ASC and compare it to that of genuine skin.

METHODS

Using three-dimensional fluorescence lifetime imaging combined with two-photon scanning microscopy, we measured with submicron resolution the three-dimensional pH gradient in the epidermis of ASCs stained with 2',7'-bis-(2-carboxyethyl)-5/6-carboxyfluorescein.

RESULTS

Similar to genuine skin, the surface of the artificial epidermis has an acidic character (pH 5.9), whereas in the deeper layers the pH increases up to 7.0. Moreover, the pH gradient differs in the cell interior (maximally 7.2) and in the intercellular matrix (maximally 6.6). Apart from the similitude of the pH distribution, the genuine and the artificial skin prove to have similar morphologies and to be characterized by similar distributions of the refractive index.

CONCLUSIONS

Artificial skin is a reliable model of genuine human skin, e.g., in permeability studies, because it is characterized by a similar pH gradient, a similar morphology, and a similar distribution of the refractive index to that of genuine skin.

Fluorescence lifetime imaging with a low-repetition-rate passively mode-locked diode-pumped Nd:YVO4 oscillator

We report a wide-field fluorescence lifetime imaging microscope based on a low-repetition-rate (3.7-MHz) passively mode-locked diode-pumped laser source. This inexpensive and compact laser source operating in the visible and UV range can excite a wide range of fluorophores of biological interest. We demonstrate that the power of this laser source is highly sufficient for studying biological systems with low quantum yields (autofluorescence of tissues and stained living cells). The maximum measurable lifetime is also strongly increased with this laser source, as fluorescence intensity measurement can occur 250 ns after the excitation pulse.

Studying biological tissue with fluorescence lifetime imaging: microscopy, endoscopy, and complex decay profiles

We have applied fluorescence lifetime imaging (FLIM) to the autofluorescence of different kinds of biological tissue in vitro, including animal tissue sections and knee joints as well as human teeth, obtaining two-dimensional maps with functional contrast. We find that fluorescence decay profiles of biological tissue are well described by the stretched exponential function (StrEF), which can represent the complex nature of tissue. The StrEF yields a continuous distribution of fluorescence lifetimes, which can be extracted with an inverse Laplace transformation, and additional information is provided by the width of the distribution. Our experimental results from FLIM microscopy in combination with the StrEF analysis indicate that this technique is ready for clinical deployment, including portability that is through the use of a compact picosecond diode laser as the excitation source. The results obtained with our FLIM endoscope successfully demonstrated the viability of this modality, though they need further optimization. We expect a custom-designed endoscope with optimized illumination and detection efficiencies to provide significantly improved performance.