Photonic bandgap fiber tapers and in-fiber interferometric sensors

Diaphragm-free gas-pressure sensor probe based on hollow-core photonic bandgap fiber

A diaphragm-free probe-type gas-pressure sensor is proposed and experimentally demonstrated based on a hollow-core photonic bandgap fiber (HC-PBF) with a quartz capillary. The section of the HC-PBF acts as a Fabry-Perot cavity, and the quartz capillary acts as a microfluidic channel for a gas inlet. An inner diameter of the quartz capillary (∼2  μm) smaller than the HC-PBF (∼10.9  μm) ensures a mirror reflection and a microfluidic channel simultaneously. The sensor probe has a minimal size (∼125  μm) and can function at gas pressures as high as 8 MPa. A higher pressure test is limited by our gas-pressure generation devices. Excellent stability of the sensor is observed in a long timescale, and repeatability of the sensor is confirmed by tests of six different samples. Compared with conventional optical fiber gas-pressure sensors, the proposed sensor involves a simple fabrication process and can acquire probe measurements with high sensitivity (∼4.17  nm/MPa), excellent linearity (0.9999), fast response, and no hysteresis. The proposed sensor can also function at temperatures as high as 800°C, which is beneficial for high pressure measurements in extreme conditions. Moreover, the fast response of the sensor is attractive for dynamic pressure measurements, which needs further study and characterization.

Arc-Induced Long Period Gratings from Standard to Polarization-Maintaining and Photonic Crystal Fibers

In this work, we report about our recent results concerning the fabrication of Long Period Grating (LPG) sensors in several optical fibers, through the Electric Arc Discharge (EAD) technique. In particular, the following silica fibers with both different dopants and geometrical structures are considered: standard Ge-doped, photosensitive B/Ge codoped, P-doped, pure-silica core with F-doped cladding, Panda type Polarization-maintaining, and Hollow core Photonic crystal fiber. An adaptive platform was developed and the appropriate “recipe” was identified for each fiber, in terms of both arc discharge parameters and setup arrangement, for manufacturing LPGs with strong and narrow attenuation bands, low insertion losses, and short length. As the fabricated devices have appealing features from the application point of view, the sensitivity characteristics towards changes in different external perturbations (i.e., surrounding refractive index, temperature, and strain) are investigated and compared, highlighting the effects of different fiber composition and structure.

Sensing features of long period gratings in hollow core fibers

We report on the investigation of the sensing features of the Long-Period fiber Gratings (LPGs) fabricated in hollow core photonic crystal fibers (HC-PCFs) by the pressure assisted Electric Arc Discharge (EAD) technique. In particular, the characterization of the LPG in terms of shift in resonant wavelengths and changes in attenuation band depth to the environmental parameters: strain, temperature, curvature, refractive index and pressure is presented. The achieved results show that LPGs in HC-PCFs represent a novel high performance sensing platform for measurements of different physical parameters including strain, temperature and, especially, for measurements of environmental pressure. The pressure sensitivity enhancement is about four times greater if we compare LPGs in HC and standard fibers. Moreover, differently from LPGs in standard fibers, these LPGs realized in innovative fibers, i.e., the HC-PCFs, are not sensitive to surrounding refractive index.

Intermodal interferometer with low insertion loss and high extinction ratio composed of a slight offset point and a matching long period grating in two-mode photonic crystal fiber

An all-fiber modal interferometer based on a long period grating (LPG) inscribed in a two-mode photonic crystal fiber (PCF) and a slight core-offset spliced end is proposed and demonstrated. The LPG is fabricated to realize energy coupling from LP01 core mode to LP11 core mode, and the two core modes will interfere at the slight core-offset spliced end. We analyze the impact of energy coupling efficiencies of the LPG and the output spliced end on the extinction ratio of the interference fringes. With an appropriate energy coupling efficiency matching condition, our modal interferometer can realize lower insertion loss and high extinction ratio. Moreover, the sensitivities of our interferometer to strain and temperature are investigated, and the good stability of this device to external refractive index change is also demonstrated. As an all-fiber interferometer made of pure silica, this device has great potential applications in high temperature sensing fields, especially in harsh conditions.

Single mode tapered fiber-optic interferometer based refractive index sensor and its application to protein sensing

We demonstrate refractive index sensors based on single mode tapered fiber and its application as a biosensor. We utilize this tapered fiber optic biosensor, operating at 1550 nm, for the detection of protein (gelatin) concentration in water. The sensor is based on the spectroscopy of mode coupling based on core modes-fiber cladding modes excited by the fundamental core mode of an optical fiber when it transitions into tapered regions from untapered regions. The changes are determined from the wavelength shift of the transmission spectrum. The proposed fiber sensor has sensitivity of refractive index around 1500 nm/RIU and for protein concentration detection, its highest sensitivity is 2.42141 nm/%W/V.

Nested fiber ring resonator enhanced Mach-Zehnder interferometer for temperature sensing

We numerically investigate the properties of the nested fiber ring resonator coupled Mach-Zehnder interferometer as a sensor. By introducing the phase bias of 0.5π in the reference arm, the two output intensities exhibit sharp asymmetric line shapes around the resonance wavelength. Utilizing the intensity interrogation, we analyze the effect of parameters on the sensitivity and the detection limit. For the 30 dB signal-noise system, the sensitivity and the detection limit can achieve 4.0866/°C and 7.341×10(-3)°C, respectively; the results indicate that this structure is suitable for high-sensitivity measurements.

Application of spectrum differential integration method in an in-line fiber Mach-Zehnder refractive index sensor

A novel spectrum differential integration (SDI) method has been proposed and verified in an in-line fiber Mach-Zehnder (MZ) refractive index (RI) sensor using salt solutions. In SDI method, the difference between two interference spectra is determined by pointwise subtraction at each wavelength, followed by integration of the absolute differences along the scan range. Compared with the widely used peak wavelength shift method, the SDI method is more reliable over a wide wavelength range (on the order of 400 nm) and results in higher sensitivity as well as reduced device-dependence. The SDI method can also be utilized with other kinds of modal interferometric sensors.

Tilted fiber grating accelerometer incorporating an abrupt biconical taper for cladding to core recoupling

We demonstrate a compact power-referenced fiber-optic accelerometer using a weakly tilted fiber Bragg grating (TFBG) combined with an abrupt biconical taper. The electric-arc-heating induced taper is located a short distance upstream from the TFBG and functions as a bridge to recouple the TFBG-excited lower-order cladding modes back into the fiber core. This recoupling is extremely sensitive to microbending. We avoid complex wavelength interrogation by simply monitoring power change in reflection, which we show to be proportional to acceleration. In addition, the Bragg resonance is virtually unaffected by fiber bending and can be used as a power reference to cancel out any light source fluctuations. The proposed sensing configuration provides a constant linear response (nonlinearity < 1%) over a vibration frequency range from DC to 250 Hz. The upper vibration frequency limit of measurement is determined by mechanical resonance, and can be tuned by varying the sensor length. The tip-reflection sensing feature enables the sensor head to be made small enough (20~100 mm in length and 2 mm in diameter) for embedded detection. The polymer-tube-package makes the sensor sufficiently stiff for in-field acceleration measurement.