Measuring near-field nanoparticle concentration profiles by correlating surface plasmon resonance reflectance with effective refractive index of nanofluids

Integrated digital holographic microscopy based on surface plasmon resonance

We propose a novel digital holographic microscopy (DHM) by integrating surface plasmon holographic microscopy (SPHM) with reflection DHM based on the angular and polarization multiplexing techniques. Taking advantages of the high sensitivity of surface plasmon resonance (SPR) and the high reflectivity of gold film, the tiny variations of specimen's refractive index (RI) can be measured by using SPHM, and meanwhile, the thickness changes of the specimen can be determined by means of reflection DHM. We experimentally monitor the volatilization process of an alcohol-water mixture droplet to verify the validity of the integrated DHM. The proposed microscopy is very promising in the objective-coupling SPR microscopy for multi-information measurements of diverse specimens with low-contrast RI distributions (biomolecules, nanofluids, etc.) in a dynamic and nondestructive way.

Full-field thickness measurement of ultrathin liquid film in receding contact-induced nano-channel using surface plasmon resonance

This research demonstrates that a surface plasmon resonance (SPR) imaging technique can effectively measure full-field nanoscale thickness of a liquid water film filled in the receding contact-induced nano-channel. To the authors' knowledge this has not been demonstrated previously. Experimental calibration has been conducted by measuring surface plasmon resonance reflectance depending on the piezometer-controlled water nano-film thickness and comparing the experimental results with the theoretical calculations to show very good agreement. The measured full-field thickness profiles significantly visualize the three-dimensional nano-channel formation filled with liquid water film. It shows that the sensitivity and the resolution in thickness measurement are estimated as 1.21 pixel gray level/nm and 2.5 nm, respectively. The experimentally observed resolution is around 10 nm given the uncertainty in the demonstrated full-field mapping of thickness. From this research, it is demonstrated that SPR imaging successfully measures the thickness of ultrathin liquid film especially below 85 nm in full-field under normal conditions and can effectively characterize the three-dimensional nano-channel formation during the receding contact process.

Wavelength-multiplexing surface plasmon holographic microscopy

Surface plasmon holographic microscopy (SPHM), which combines surface plasmon microscopy with digital holographic microscopy, can be applied for amplitude- and phase-contrast surface plasmon resonance (SPR) imaging. In this paper, we propose an improved SPHM with the wavelength multiplexing technique based on two laser sources and a common-path hologram recording configuration. Through recording and reconstructing the SPR images at two wavelengths simultaneously employing the improved SPHM, tiny variation of dielectric refractive index in near field is quantitatively monitored with an extended measurement range while maintaining the high sensitivity. Moreover, imaging onion tissues is performed to demonstrate that the detection sensitivities of two wavelengths can compensate for each other in SPR imaging. The proposed wavelength-multiplexing SPHM presents simple structure, high temporal stability and inherent capability of phase curvature compensation, as well as shows great potentials for further applications in monitoring diverse dynamic processes related with refractive index variations and imaging biological tissues with low-contrast refractive index distributions in the near field.

Common-path digital holographic microscopy for near-field phase imaging based on surface plasmon resonance

We develop a common-path digital holographic microscopy based on prism-coupling surface plasmon resonance (SPR) for near-field phase imaging. A single beam splitter with specific configuration is introduced in an SPR imaging system to realize off-axis holographic recording. By measuring the phase shift difference of the reflected light at SPR exploiting the proposed holographic microscopy with high temporal stability, near-field characteristic measurement can be realized. With its simplicity, vibration isolation, and inherent capability of phase curvature compensation, the recommended system shows advanced performance in monitoring tiny refractive index variations and imaging biological tissues.

Nano Sensing and Energy Conversion Using Surface Plasmon Resonance (SPR)

Nanophotonic technique has been attracting much attention in applications of nano-bio-chemical sensing and energy conversion of solar energy harvesting and enhanced energy transfer. One approach for nano-bio-chemical sensing is surface plasmon resonance (SPR) imaging, which can detect the material properties, such as density, ion concentration, temperature, and effective refractive index in high sensitivity, label-free, and real-time under ambient conditions. Recent study shows that SPR can successfully detect the concentration variation of nanofluids during evaporation-induced self-assembly process. Spoof surface plasmon resonance based on multilayer metallo-dielectric hyperbolic metamaterials demonstrate SPR dispersion control, which can be combined with SPR imaging, to characterize high refractive index materials because of its exotic optical properties. Furthermore, nano-biophotonics could enable innovative energy conversion such as the increase of absorption and emission efficiency and the perfect absorption. Localized SPR using metal nanoparticles show highly enhanced absorption in solar energy harvesting. Three-dimensional hyperbolic metamaterial cavity nanostructure shows enhanced spontaneous emission. Recently ultrathin film perfect absorber is demonstrated with the film thickness is as low as ~1/50th of the operating wavelength using epsilon-near-zero (ENZ) phenomena at the wavelength close to SPR. It is expected to provide a breakthrough in sensing and energy conversion applications using the exotic optical properties based on the nanophotonic technique.

Joining plasmonics with microfluidics: from convenience to inevitability

Along the advances in optofluidics, functionalities based on the surface plasmon-polariton have also been finding an increasing level of involvement within micro/nano-fluidic systems, gradually forming a new field of plasmo-fluidics. This survey of the burgeoning field reveals that judicious selection and combination of plasmonic and micro/nano-fluidic features render the plasmo-fluidic integration useful and mutually beneficial to the point of inevitability. We establish categories for the level of integration and utilize them as a framework for surveying existing work and extracting future perspectives.

How to optically count graphene layers

The total thickness of a graphene sample depends upon the number of individually stacked graphene layers. The corresponding surface plasmon resonance (SPR) reflectance alters the SPR angle, depending on the number of graphene layers. Thus, the correlation between the SPR angle shift and the number of graphene layers allows for a nonintrusive, real-time, and reliable counting of graphene layers. A single-layer graphene (SLG) is synthesized by means of chemical vapor deposition, followed by physical transfer to a thin gold film (48 nm) repeatedly, so that multilayer graphene samples with one, three, and five layers can be prepared. Both the measured SPR angles and the entire reflectance curve profiles successfully distinguish the number of graphene layers.

nPIV velocity measurement of nanofluids in the near-wall region of a microchannel

Colloidal suspensions of nano-sized particles in a base fluid, nanofluids, have recently gained popularity as cooling fluids mainly due to their enhanced heat transfer capabilities. However, there is controversy in the literature on the reported properties of nanofluids and their applicability, especially since there is no fundamental understanding that explains these enhancements. A better understanding of these fluids and how they interact with a solid boundary may be achieved by a detailed near-wall fluid flow study at nanoscale. This work presents for the first time the near-wall velocity measurements for nanofluids using nanoparticle image velocimetry. This novel technique uses evanescent illumination in the solid-fluid interface to measure near-wall velocity field with an out-of-plane resolution on the order of O(100 nm). Nanofluids of different concentrations were prepared by dispersing silicon dioxide particles (10 to 20 nm) in water as the base fluid. Initially, viscosity measurements were conducted for the prepared nanofluids. The near-wall velocity data were then measured and compared with that of the base fluid at the same flow condition. It was observed that even though nanofluid viscosity had increased with particle loading, the near-wall velocity values were similar to that of the base fluid for a given flow rate. Together, these measurements vindicate the homogenous and Newtonian characteristics of the nanofluids in the near-wall region. Despite the low particle concentrations investigated, the present work also discusses the complexity involved in utilizing the methodology and possible errors arising during experimentation so as to implement this measurement tool more effectively in the future.

New trends in instrumental design for surface plasmon resonance-based biosensors

Surface plasmon resonance (SPR)-based biosensing is one of the most advanced label free, real time detection technologies. Numerous research groups with divergent scientific backgrounds have investigated the application of SPR biosensors and studied the fundamental aspects of surface plasmon polaritons that led to new, related instrumentation. As a result, this field continues to be at the forefront of evolving sensing technology. This review emphasizes the new developments in the field of SPR-related instrumentation including optical platforms, chips design, nanoscale approach and new materials. The current tendencies in SPR-based biosensing are identified and the future direction of SPR biosensor technology is broadly discussed.