Toward higher-order passive harmonic mode-locking of a soliton fiber laser

Generation of 583 fs optical pulses at 10 GHz from a regeneratively mode-locked fiber laser combining nonlinear polarization evolution

A regeneratively mode-locked erbium fiber laser was numerically investigated and experimentally demonstrated, which was able to generate a 583 fs pulse train at 10 GHz via intracavity pulse compression with nonlinear polarization evolution (NPE). To excite the NPE at such a high repetition rate, a dispersion map was intentionally introduced to obtain short pulses accompanied by high peaks through soliton-like pulse shaping. Numerical simulations indicated that steady-state oscillation with pulses below 1 ps can be successfully established using this laser configuration. Experimentally, we obtained a pulse duration of 583 fs and a 3 dB spectral width of 4.5 nm at an average output power of 15.6 mW. Simultaneously, supermode suppression of more than 80 dB was also obtained from the appropriate biased NPE.

Novel nanomaterials based saturable absorbers for passive mode locked fiber laser at 1.5μm

Compared with continuous wave lasers, ultrafast lasers have the advantages of ultra-short pulse width and ultra-high peak power, and have significant applications in optical communications, medical diagnostics, and precision machining. Saturable absorber (SA) technology is the most effective technique for the generation of ultra-fast lasers, which are based on artificial SAs and natural SAs. Among them, the semiconductor saturable absorber mirror has become the most commonly used form at present. Recently, basic research and application of nanomaterials such as carbon nanotubes (CNTs) and graphene have been developed rapidly. Researchers have found that nanomaterials exhibit extraordinary characteristics in ultrafast photonics, such as the low saturation intensity of CNTs, zero-band gap of graphene, and extremely high modulation depth of the topological insulator nano-films. Since graphene was first reported as an SA in 2009, many other nanomaterials have been successively explored, resulting in the rapid development of novel nanomaterial-based SAs. In this paper, we classified the nanomaterials used in SA mode-locking technology at 1.5μm and reviewed their research progress with a particular focus on nonlinear optical properties, integration strategies, and applications in the field of ultrafast photonics.

Passively Mode-Locked Er-Doped Fiber Laser Based on Sb2S3-PVA Saturable Absorber

In this paper, antimony trisulfide (Sb₂S₃) was successfully prepared with the liquid phase exfoliation method and embedded into polyvinyl alcohol (PVA) as a saturable absorber (SA) in a passively mode-locked Er-doped fiber laser for the first time. Based on Sb₂S₃-PVA SA with a modulation depth of 4.0% and a saturable intensity of 1.545 GW/cm², a maximum average output power of 3.04 mW and maximum peak power of 325.6 W for the stable mode-locked pulses was achieved with slope a efficiency of 0.87% and maximum single pulse energy of 0.81 nJ at a repetition rate of 3.47 MHz under a pump power of 369 mW. A minimum pulse width value of 2.4 ps with a variation range less than 0.1 ps, and a maximum signal to noise ratio (SNR) of 54.3 dB indicated reliable stability of mode-locking, revealing promising potentials of Sb₂S₃ as a saturable absorber in ultrafast all-fiber lasers.

High energy switchable pulsed High-order Mode beams in a mode-locking Raman all-fiber laser with high efficiency

High energy pulsed High-order Mode (HOM) beams has great potential in materials processing and particle acceleration. We experimentally demonstrate a high energy mode-locking Raman all-fiber laser with switchable HOM state. A home-made fiber mode-selective coupler (MSC) is used as the mode converter with a wide bandwidth of 60 nm. By combining advantages of MSC and stimulated Raman scattering, 1.1 μJ pulsed HOM beams directly emitting from the all-fiber cavity can be achieved. After controlling the category and phase delay of vector modal superposition, different pulsed HOM beams including cylindrical vector beams (CVBs) (radial and angular) and optical vortex beams (OVBs) are reasonably obtained with high purity (all over 95%), as well as arbitrary switching. Furtherly, the slope efficiency of HOM beams in the mode-locking and continuous wave operations are as much as 20.3% and 31.8%, respectively. It may provide an effective way to achieve high energy pulsed HOM beams.

Nonlinearity managed passively harmonic mode-locked Er-doped fiber laser based on carbon nanotube film

We examine the implication of intracavity nonlinearity for harmonic mode locking (HML) by exploiting highly nonlinear fiber in a carbon nanotube film mode-locked Er-doped fiber laser. It is found that the reasonably large nonlinearity is of benefit to increase the extent of harmonic order while the excessive nonlinearity leads to some peculiar multi-pulse patterns such as noise-like pulse and soliton rain. Via appropriate nonlinearity management, nearly 4 GHz repetition rate pulses at the 91st harmonic with 936 fs pulse duration are delivered under the pump power of 280 mW. The pulse stability is evidenced by the super-mode suppression ratio of 35.6 dB. To the best of our knowledge, it is the highest repetition rate yet reported for a passively HML fiber laser based on a film-type physical saturable absorber. Furthermore, the laser exhibits steep pumping efficiency slope of ${\gt}{19}\;{\rm MHz/mW}$, which is also a record among all of the passively HML fiber lasers.

Investigation of a new graphene strain sensor based on surface plasmon resonance

The high confinement of surface plasmon polaritons in graphene nanostructures at infrared frequencies can enhance the light-matter interactions, which open up intriguing possibilities for the sensing. Strain sensors have attracted much attention due to their unique electromechanical properties. In this paper, a surface plasmon resonance based graphene strain sensor is presented. The considered sensing platform consists of arrays of graphene ribbons placed on a flexible substrate which enables efficient coupling of an electromagnetic field into localized surface plasmons. When the strain stretching is applied to the configuration, the localized surface plasmon resonance frequency sensitively shift. The strain is then detected by measuring the frequency shifts of the localized plasmon resonances. This provides a new optical method for graphene strain sensing. Our results show that the tensile direction is the key parameter for strain sensing. Besides, the sensitivity and the figure of merit were calculated to evaluate the performance of the proposed sensor. The calculated figure of merit can be up to two orders of magnitude, which could be potentially useful from a practical point of view.

High-frequency vector harmonic mode locking driven by acoustic resonances

A controllable passive harmonic mode locking (HML) in an erbium-doped fiber laser with a soliton pulse shaping using a single-wall carbon nanotube has been experimentally demonstrated. By increasing the pump power and adjusting the in-cavity polarization controller, we reached the 51st-order harmonic (902 MHz) having the output power of 37 mW. We attribute the observed high-frequency HML to the electrostriction effect caused by periodic pulses and leading to excitation of the radial and torsional-radial acoustic modes in the transverse section of the laser. The exited acoustic modes play the role of the bandpass filter, which stabilizes the high-frequency HML regime.

SnSe2 Nanosheets for Subpicosecond Harmonic Mode-Locked Pulse Generation

Tin diselenide (SnSe₂ ) nanosheets as novel 2D layered materials have excellent optical properties with many promising application prospects, such as photoelectric detectors, nonlinear optics, infrared photoelectric devices, and ultrafast photonics. Among them, ultrafast photonics has attracted much attention due to its enormous advantages; for instance, extremely fast pulse, strong peak power, and narrow bandwidth. In this work, SnSe₂ nanosheets are fabricated by using solvothermal treatment, and the characteristics of SnSe₂ are systemically investigated. In addition, the solution of SnSe₂ nanosheets is successfully prepared as a fiber-based saturable absorber by utilizing the evanescent field effect, which can bear a high pump power. 31st-order subpicosecond harmonic mode locking is generated in an Er-doped fiber laser, corresponding to the maximum repetition rate of 257.3 MHz and pulse duration of 887 fs. The results show that SnSe₂ can be used as an excellent nonlinear photonic device in many fields, such as frequency comb, lasers, photodetectors, etc.

Single and dual-wavelength noise-like pulses with different shapes in a double-clad Er/Yb fiber laser

We report an experimental study of passive harmonic mode-locking in an all-fiber switchable dual-wavelength Er/Yb double-clad laser. The proposed scheme supports single- and dual-wavelength operation of mode-locked pulses with rectangular, h-like and trapezoidal shapes in a noise-like pulse regime. Single-wavelength emissions at λ₁ = 1545.1 and λ₂ = 1563.6 nm were obtained for pump power values of 9.42 and 6.31 W, achieving pulse durations of up to 18 and 11.8 ns, respectively. At an intermediary pump power of 7.5 W, dual-wavelength emission is obtained and pulses of around 3.59 ns are generated. Additionally, the transition dynamics until 4th-order harmonic mode-locking is also observed. Different laser operation regimes of fundamental and different orders of harmonic mode-locking, with rectangular, h-shaped or trapezoidal shaped pulses are obtained with the same laser configuration with simple and well-defined plates and pump power adjustments.

20 GHz actively mode-locked thulium fiber laser

A high repetition-rate actively mode-locked thulium fiber laser is demonstrated where an electro-optic lithium niobate phase modulator is used to synchronize the longitudinal modes in the cavity. The repetition rate of the actively mode-locked laser is tunable from 14.6 MHz to 19 GHz, where the 19 GHz pulses exhibit a super-mode suppression ratio of 46 dB. Furthermore, the output pulse width could be manipulated through finely controlling the detuning frequency or repetition rate. We have also experimentally observed rational harmonic mode-locking in the laser and obtained 14 GHz and 21 GHz repetition rate pulses using a 7 GHz modulating signal. To the best of our knowledge, we have improved the repetition-rate of actively mode-locked thulium fiber laser by more than one order of magnitude. Such a high repetition source can be readily synchronized to a master clock, which makes it very suitable for high speed optical data processing, communication and remote sensing.

14.5 GHz passive harmonic mode-locking in a dispersion compensated Tm-doped fiber laser

We demonstrate a high repetition rate passive harmonic mode-locking (HML) based on nonlinear polarization evolution (NPE) technique in a Tm-doped ring fiber laser cavity. Small net anomalous cavity dispersion based on dispersion compensation benefited the generation of high repetition rate HML due to the low soliton splitting threshold. Stable HML with a repetition rate of up to 14.5 GHz and a super-mode suppression (SSR) of 19 dB was obtained at the center wavelength of 1982.3 nm, which is about ten times of state of the art at 2 μm band mode-locking fiber laser to our best knowledge. The repetition rate was selectable between 1 GHz to 14.5 GHz through changing the pump power and intra-cavity polarization state, and the SSR better than 25 dB was obtained as the repetition rate less than 5 GHz.

Coexistence of noise-like pulse and high repetition rate harmonic mode-locking in a dual-wavelength mode-locked Tm-doped fiber laser

Coexistence of harmonic mode-locking (HML) and noise-like pulse (NLP) were experimentally observed in a dual-wavelength mode-locked Tm-doped fiber laser for the first time. The coexistence patterns were self-started and maintained within a wide pump range by appropriately setting the intra-cavity polarization state. The HML was obtained at 1955.3 nm with a varied repetition rate range from 324 MHz to 1.138 GHz which benefits from the dispersion compensation, while the NLP observing at 1983.2 nm can operate at either fundamental repetition rate of 4.765 MHz or second harmonic state. Experimental investigations show that the coexistence patterns are caused by the wavelength-dependent phase delay of the mode-locked fiber cavity. Moreover, dual-wavelength NLP was also observed for the first time at 2 μm spectral region by changing the intra-cavity polarization state.

All-fiber Tm-doped soliton laser oscillator with 6 nJ pulse energy based on evanescent field interaction with monoloayer graphene saturable absorber

We demonstrate an all-fiber Tm-doped soliton laser with high power by using a monolayer graphene saturable absorber (SA). Large area, uniform monolayer graphene was transferred to the surface of the side-polished fiber (SPF) to realize an in-line graphene SA that operates around 2 μm wavelength. To increase the nonlinear interaction with graphene, we applied an over-cladding onto the SPF, where enhanced optical absorption at monolayer graphene was observed. All-fiber Tm-doped mode-locked laser was built including our in-line graphene SA, which stably delivered the soliton pulses with 773 fs pulse duration. The measured 3-dB spectral bandwidth was 5.14 nm at the wavelength of 1910 nm. We obtained the maximum average output power of 115 mW at a repetition rate of 19.31 MHz. Corresponding pulse energy was estimated to be 6 nJ, which is the highest value among all-fiber Tm-doped soliton oscillators using carbon-material-based SAs.

Femtosecond harmonic mode-locking of a fiber laser at 3.27 GHz using a bulk-like, MoSe2-based saturable absorber

We experimentally demonstrate the use of a bulk-like, MoSe₂-based saturable absorber (SA) as a passive harmonic mode-locker for the production of femtosecond pulses from a fiber laser at a repetition rate of 3.27 GHz. By incorporating a bulk-like, MoSe₂/PVA-composite-deposited side-polished fiber as an SA within an erbium-doped-fiber-ring cavity, mode-locked pulses with a temporal width of 737 fs to 798 fs can be readily obtained at various harmonic frequencies. The fundamental resonance frequency and the maximum harmonic-resonance frequency are 15.38 MHz and 3.27 GHz (212th harmonic), respectively. The temporal and spectral characteristics of the output pulses are systematically investigated as a function of the pump power. The output pulses exhibited Gaussian-temporal shapes irrespective of the harmonic order, and even when their spectra possessed hyperbolic-secant shapes. The saturable absorption and harmonic-mode-locking performance of our prepared SA are compared with those of previously demonstrated SAs that are based on other transition metal dichalcogenides (TMDs). To the best of the authors' knowledge, the repetition rate of 3.27 GHz is the highest frequency that has ever been demonstrated regarding the production of femtosecond pulses from a fiber laser that is based on SA-induced passive harmonic mode-locking.

Tunable passively harmonic mode-locked Yb-doped fiber laser with Lyot-Sagnac filter

A novel passively harmonic mode-locked dissipative soliton Yb-doped fiber laser with all normal dispersion is proposed and experimentally demonstrated based on a semiconductor saturable absorption mirror and tunable Lyot-Sagnac filter. By only tuning the bandwidth of the filter at fixed pump power, the repetition rate of 9.87 to 167.8 MHz (corresponding to 17th-order harmonic) is obtained. This is the highest repetition rate and harmonic order for a passively harmonic mode-locked dissipative soliton Yb-doped fiber laser with all-normal dispersion to the best of our knowledge. The signal-to-noise ratio and super-mode suppression ratio for all harmonic orders are higher than 65 and 35 dB, respectively, which shows the high stability of the fiber laser.

Passive harmonic hybrid mode-locked fiber laser with extremely broad spectrum

We demonstrate a harmonic mode-locking Erbium-doped fiber laser which is cooperatively mode-locked by nonlinear polarization evolution (NPE) and semiconductor saturable absorber mirror (SESAM). Via effective dispersion and nonlinearity optimization, 8th harmonic at a repetition rate of 666.7 MHz is obtained. The output pulses has a full spectrum width at half maximum (FWHM) of 181 nm and duration of 218 fs. The pulses are compressed to 91 fs by external chirp compensation. The average power of the direct output pulse at an available pump power of 1.5 W is 136 mW, which exhibits a single-pulse energy of 0.2 nJ. The cavity super-mode suppression is up to 60 dB and the signal-to-noise ratio of the 8th harmonic is over 75 dB.

Graphene-deposited microfiber photonic device for ultrahigh-repetition rate pulse generation in a fiber laser

We report on the generation of a high-repetition-rate pulse in a fiber laser using a graphene-deposited microfiber photonic device (GMPD) and a Fabry-Perot filter. Taking advantage of the unique nonlinear optical properties of the GMPD, dissipative four-wave mixing effect (DFWM) could be induced at low pump power. Based on DFWM mode-locking mechanism, the fiber laser delivers a 100 GHz repetition rate pulse train. The results indicate that the small sized GMPD offers an alternative candidate of highly nonlinear optical component to achieve high-repetition rate pulses, and also opens up possibilities for the investigation of other abundant nonlinear effects or related fields of photonics.

Femtosecond harmonic mode-locking of a fiber laser based on a bulk-structured Bi(2)Te(3) topological insulator

We experimentally demonstrate femtosecond harmonic mode-locking of a fiber laser using a bulk-structured Bi(2)Te(3) topological insulator (TI)-deposited on a side-polished fiber as a mode-locker. A bulk-structured Bi(2)Te(3) TI film was prepared at a thickness of ~20 μm using a mechanical exfoliation method. Using the mode-locker in an erbium-doped fiber ring cavity, it was experimentally shown that harmonically mode-locked pulses with temporal widths of 630 ~700 fs could readily be generated upto the 55th harmonics. The pulse repetition rate was shown to be tunable from the fundamental resonance frequency of 14.07 MHz to the harmonic frequency of 773.85 MHz with increasing pump power. The pumping efficiency was measured at ~3.36 MHz/mW. The side mode suppression ratio (SMSR) was observed to be more than 27.3 dB over all harmonic orders, while the corresponding signal-to-noise ratio (SNR) ranged from 46.3 to 63 dB.

A 2.95 GHz, femtosecond passive harmonic mode-locked fiber laser based on evanescent field interaction with topological insulator film

By utilizing the pulsed laser deposition (PLD) method, we fabricated a kind of microfiber-based topological insulator (TI) saturable absorber (SA) which has inherent merits of effective and robust properties. We also proposed a newly explanation for the impact of nonlinear effect of SA on the harmonic mode-locking (HML) behavior. Upon employing on the SA, we achieved stable fundamental mode-locking (FML) at central wavelength of 1562.4 nm with pulse duration as short as 320 fs. By adjusting the intracavity polarization state at maximum pump power of 395 mW, we obtained stable femtosecond harmonic soliton pulse generation with repetition rate of 2.95 GHz and output power of 45.3 mW. Our results demonstrated that the microfiber-based TI PLD film SA is a promising device for practical multi-GHz ultrashort pulses generation.

Microfiber-based few-layer MoS2 saturable absorber for 2.5 GHz passively harmonic mode-locked fiber laser

We reported on the generation of high-order harmonic mode-locking in a fiber laser using a microfiber-based molybdenum disulfide (MoS(2)) saturable absorber (SA). Taking advantage of both the saturable absorption and large third-order nonlinear susceptibilities of the few-layer MoS(2), up to 2.5 GHz repetition rate HML pulse could be obtained at a pump power of 181 mW, corresponding to 369th harmonic of fundamental repetition frequency. The results provide the first demonstration of the simultaneous applications of both highly nonlinear and saturable absorption effects of the MoS(2), indicating that the microfiber-based MoS(2) photonic device could serve as high-performance SA and highly nonlinear optical component for application fields such as ultrafast nonlinear optics.

2 GHz passively harmonic mode-locked fiber laser by a microfiber-based topological insulator saturable absorber

We report on the generation of passive harmonic mode locking of a fiber laser using a microfiber-based topological insulator (TI) Bi(2)Te(3) saturable absorber (SA). The optical deposition method was employed to fabricate the microfiber-based TISA. By virtue of the excellent nonlinear optical property of the proposed TISA, the fiber laser could operate at the pulse repetition rate of 2.04 GHz under a pump power of 126 mW, corresponding to the 418th harmonic of fundamental repetition frequency. The results demonstrate that the microfiber-based TI photonic device can operate as both the high nonlinear optical component and the SA in fiber lasers, and could also find other applications in the related fields of photonics.

Multi-gigahertz repetition-rate-selectable passive harmonic mode locking of a fiber laser

We demonstrate a passive harmonically mode-locked erbium-doped fiber laser that operates at selectable harmonics spanning from the 6th to the 928th, which corresponds to repetition rates ranging from 153 MHz to 22.2 GHz. The noteworthy laser output stability is attested by supermode suppression levels as large as 41 dB. The influence of a continuous wave background on harmonics stability is tested.