Femtosecond digital lensless holographic microscopy to image biological samples

Multi-Illumination Single-Holographic-Exposure Lensless Fresnel (MISHELF) Microscopy: Principles and Biomedical Applications

Lensless holographic microscopy (LHM) comes out as a promising label-free technique since it supplies high-quality imaging and adaptive magnification in a lens-free, compact and cost-effective way. Compact sizes and reduced prices of LHMs make them a perfect instrument for point-of-care diagnosis and increase their usability in limited-resource laboratories, remote areas, and poor countries. LHM can provide excellent intensity and phase imaging when the twin image is removed. In that sense, multi-illumination single-holographic-exposure lensless Fresnel (MISHELF) microscopy appears as a single-shot and phase-retrieved imaging technique employing multiple illumination/detection channels and a fast-iterative phase-retrieval algorithm. In this contribution, we review MISHELF microscopy through the description of the principles, the analysis of the performance, the presentation of the microscope prototypes and the inclusion of the main biomedical applications reported so far.

Holographic point source for digital lensless holographic microscopy

A holographic point source (HPS) developed for digital lensless holographic microscopy (HPS-DLHM) is presented. The HPS is an off-axis phase transmission hologram of an experimental micrometer pinhole recorded on a photopolymer holographic film. An amplitude division interferometer, adjusted to operate at maximum diffraction efficiency, has been employed to record the hologram. The results of HPS-DLHM have been contrasted with the results obtained via conventional DLHM, and the two techniques were found to give similar measurements. Compared with conventional pinhole-based DLHM illumination, our cost-effective proposal provides increased mechanical stability, the possibility of wider spherical illumination cones, and shorter reconstruction distances. These superior features pave the way to applying this quantitative phase imaging (QPI) technique in biomedical and telemedicine applications. The imaging capabilities of our HPS-DLHM proposal have been tested by using an intricate sample of a honeybee leg, a low-absorption sample of epithelial cheek cells, a 1951 USAF test target, and smeared human erythrocytes.

FFT-based simulation of the hologram-recording process for light-in-flight recording by holography

We propose a numerical simulation method of the hologram-recording process for light-in-flight recording by holography (LIF holography) based on fast Fourier transform (FFT) to improve the efficiency of the simulation. Because it is crucial to consider the difference in the optical-path length between the object and reference light pulses, we modify a point-spread function by considering the optical-path lengths of the object and reference light pulses and whether both pulses interfere with each other in LIF holography. The computational time was shortened by 5.5×10⁵ times for the 4,096×4,096 resolution of the hologram using the proposed method. We evaluate the proposed method by calculating the root mean square error (RMSE) of the reconstructed holographic images. The RMSEs were relatively small considering the effect of speckle noise; these results effectively demonstrate the validity of the proposed method. Moreover, we reconstruct the moving pictures of light pulse propagation from the hologram generated by the proposed method. We compare the simulation and experimental results, and succeed in qualitatively demonstrating the validity of the proposed method.

Design, Calibration, and Application of a Robust, Cost-Effective, and High-Resolution Lensless Holographic Microscope

Lensless holographic microscope (LHM) is an emerging very promising technology that provides high-quality imaging and analysis of biological samples without utilizing any lens for imaging. Due to its small size and reduced price, LHM can be a very useful tool for the point-of-care diagnosis of diseases, sperm assessment, or microfluidics, among others, not only employed in advanced laboratories but also in poor and/or remote areas. Recently, several LHMs have been reported in the literature. However, complete characterization of their optical parameters remains not much presented yet. Hence, we present a complete analysis of the performance of a compact, reduced cost, and high-resolution LHM. In particular, optical parameters such as lateral and axial resolutions, lateral magnification, and field of view are discussed into detail, comparing the experimental results with the expected theoretical values for different layout configurations. We use high-resolution amplitude and phase test targets and several microbeads to characterize the proposed microscope. This characterization is used to define a balanced and matched setup showing a good compromise between the involved parameters. Finally, such a microscope is utilized for visualization of static, as well as dynamic biosamples.

Extended light-source-based lensless microscopy using constrained and regularized reconstruction

Lensless microscopy is a simple, portable, and cost-effective method of microscopy. It has been extensively investigated with coherent light sources such as laser setups or partially coherent light sources such as an LED filtered with a pinhole aperture. The coherence of light has a direct influence on the resolution of the reconstructed object. This paper presents lensless microscopy with a spatially extended light source (white LED flashlight without any subsequent engineering). A reconstruction method based on constrained and regularized optimization is presented. The resolution reduced due to decreased coherence is gained by the presented method of object estimation.

Compact, cost-effective and field-portable microscope prototype based on MISHELF microscopy

We report on a reduced cost, portable and compact prototype design of lensless holographic microscope with an illumination/detection scheme based on wavelength multiplexing, working with single hologram acquisition and using a fast convergence algorithm for image processing. All together, MISHELF (initials coming from Multi-Illumination Single-Holographic-Exposure Lensless Fresnel) microscopy allows the recording of three Fresnel domain diffraction patterns in a single camera snap-shot incoming from illuminating the sample with three coherent lights at once. Previous implementations have proposed an illumination/detection procedure based on a tuned (illumination wavelengths centered at the maximum sensitivity of the camera detection channels) configuration but here we report on a detuned (non-centered ones) scheme resulting in prototype miniaturization and cost reduction. Thus, MISHELF microscopy in combination with a novel and fast iterative algorithm allows high-resolution (μm range) phase-retrieved (twin image elimination) quantitative phase imaging of dynamic events (video rate recording speed). The performance of this microscope prototype is validated through experiments using both amplitude (USAF resolution test) and complex (live swine sperm cells and flowing microbeads) samples. The proposed method becomes in an alternative instrument improving some capabilities of existing lensless microscopes.

Color digital lensless holographic microscopy: laser versus LED illumination

A comparison of the performance of color digital lensless holographic microscopy (CDLHM) as utilized for illumination of RGB lasers or a super-bright white-light LED with a set of spectral filters is presented. As the use of lasers in CDLHM conceals the possibility of having a compact, lightweight, portable, and low cost microscope, and additionally the limited available laser radiation wavelengths limit a real multispectral imaging microscope, here we present the use of super-bright white-light LED and spectral filters for illuminating the sample. The performance of RGB laser-CDLHM and LED-CDLHM is evaluated on imaging a section of the head of a Drosophila melanogaster fly. This comparison shows that there is trade-off between the spatial resolution of the microscope and the light sources utilized, which can be understood with regard to the coherence properties of the illuminating light. Despite the smaller spatial coherence features of LED-CDLHM in comparison with laser-CDLHM, the former shows promise as a portable RGB digital lensless holographic microscope that could be extended to other wavelengths by the use of different spectral filters.

Improved quantitative phase imaging in lensless microscopy by single-shot multi-wavelength illumination using a fast convergence algorithm

We report on a novel algorithm for high-resolution quantitative phase imaging in a new concept of lensless holographic microscope based on single-shot multi-wavelength illumination. This new microscope layout, reported by Noom et al. along the past year and named by us as MISHELF (initials incoming from Multi-Illumination Single-Holographic-Exposure Lensless Fresnel) microscopy, rises from the simultaneous illumination and recording of multiple diffraction patterns in the Fresnel domain. In combination with a novel and fast iterative phase retrieval algorithm, MISHELF microscopy is capable of high-resolution (micron range) phase-retrieved (twin image elimination) biological imaging of dynamic events. In this contribution, MISHELF microscopy is demonstrated through qualitative concept description, algorithm implementation, and experimental validation using both a synthetic object (resolution test target) and a biological sample (swine sperm sample) for the case of three (RGB) illumination wavelengths. The proposed method becomes in an alternative instrument improving the capabilities of existing lensless microscopes.

Holographic tracking of living cells by three-dimensional reconstructed complex wavefronts alignment

We propose here a new three-dimensional (3D) holographic tracking method capable to track, simultaneously and in a single step, all the spatial coordinates of micro-objects. The approach is based on the enhanced correlation coefficient (ECC) maximization method but applied, for the first time to the best of our knowledge, directly on the holographic reconstructed complex wave fields. The key novelty of the proposed strategy is its ability to calculate simultaneously the 3D coordinates of cells, without decoupling the contribution of amplitude and phase. The proposed strategy is tested on living cells (i.e., NIH 3T3 mouse fibroblast) flowing into a microfluidic channel and compared with classical holographic tracking approach. Theoretical description and experimental validation of the proposed strategy are reported.