Closed-form solution of the steady-state photon diffusion equation in the presence of absorbing inclusions

Optical Characterization of Homogeneous and Heterogeneous Intralipid-Based Samples

Different scattering processes take place when photons propagate inside turbid media. Many powerful experimental techniques exploiting these processes have been developed and applied over the years in a large variety of situations from fundamental and applied research to industrial applications. In the present paper, we intend to take advantage of Static Light Scattering (SLS), Dynamic Light Scattering (DLS), and Time-Resolved Transmittance (TRT) for investigating all the different scattering regimes by using scattering suspensions in a very large range of scatterer concentrations. The suspensions were prepared using Intralipid 20%, a material largely employed in studies of the optical properties of turbid media, with concentrations from 10−5% to 50%. By the analysis of the angular and temporal dependence of the scattered light, a more reliable description of the scattering process occurring in these samples can be obtained. TRT measurements allowed us to obtain information on the reduced scattering coefficient, an important parameter largely used in the description of the optical properties of turbid media. TRT was also employed for the detection of inclusions embedded in Intralipid suspensions, by using a properly designed data analysis. The present study allowed us to better elucidate the dependence of scattering properties of Intralipid suspensions in a very large concentration range and the occurrence of the different scattering processes involved in the propagation of light in turbid media for the first time to our knowledge. In so doing, the complementary contribution of SLS, DLS, and TRT in the characterization of turbid media from an optical and structural point of view is strongly evidenced.

Laparoscopic diffuse reflectance spectroscopy of an underlying tubular inclusion: a phantom study

We demonstrate diffuse reflectance spectroscopy (DRS) of a subsurface tubular inclusion by using a fiber probe having a single source-detector pair attached to a laparoscopic bipolar device. A forward model was also developed for DRS sensing of an underlying long absorbing tubular inclusion set in parallel to the tissue surface, normal to the line of sight of the source-detector pair, and equidistant from the source and the detector. The model agreed with measurements performed at 500 nm and using a 10 mm source-detector separation (SDS) on an aqueous tissue phantom embedding a tubing of 2 or 4 mm inner diameter that contained 9.1% to 33.3% red dye at a depth of up to 11.5 mm. When tested on solid phantoms using the 10 mm SDS, a tubular inclusion of $ \ge 3\;{\rm mm}$≥3mm inner diameter containing 0.05% red dye at a background absorption coefficient of $ 0.021\;{\rm mm}^{-1} $0.021mm^-1 caused $ \ge 8\% $≥8% change of the signal at 500 nm versus the baseline when the inclusion was shallower than 5 mm. When assessed on avian muscle tissue having a 4 mm tubular inclusion embedded at an edge depth of 2 mm, DRS with the 10 mm SDS differentiated the following contents of the inclusion: 33.3% red dye (mimicking blood), 33.3% green dye, 33.3% yellow dye (mimicking bile), water (mimicking urine), and air.

Spatial sensitivity and penetration depth of three cerebral oxygenation monitors

The spatial sensitivities of NIRO-100, ISS Oximeter and TRS-20 cerebral oxygenation monitors are mapped using the local perturbation method to inform on their penetration depths and susceptibilities to superficial contaminations. The results show that TRS-20 has the deepest mean penetration depth and is less sensitive than the other monitors to a localized absorption change in the superficial layer. However, an integration time of more than five seconds is required by the TRS-20 to achieve an acceptable level of signal-to-noise ratio, which is the poorest amongst the monitors. With the exception of NIRO-100 continuous wave method, the monitors are not significantly responsive to layer-wide absorption change that occurs in the superficial layer.

Phantoms for diffuse optical imaging based on totally absorbing objects, part 2: experimental implementation

We present the experimental implementation and validation of a phantom for diffuse optical imaging based on totally absorbing objects for which, in the previous paper [J. Biomed. Opt.18(6), 066014, (2013)], we have provided the basic theory. Totally absorbing objects have been manufactured as black polyvinyl chloride (PVC) cylinders and the phantom is a water dilution of intralipid-20% as the diffusive medium and India ink as the absorber, filled into a black scattering cell made of PVC. By means of time-domain measurements and of Monte Carlo simulations, we have shown the reliability, the accuracy, and the robustness of such a phantom in mimicking typical absorbing perturbations of diffuse optical imaging. In particular, we show that such a phantom can be used to generate any absorption perturbation by changing the volume and position of the totally absorbing inclusion.