Optical ultrafast random number generation at 1 Tb/s using a turbulent semiconductor ring cavity laser

True random number generation based on temporal fluctuations of abalone shell coherent random lasers

The output modes of random lasers exhibit randomness, making them a potential high-quality physical entropy source for generating random numbers. In this paper, we controlled a low-cost and easily fabricated abalone shell random laser, generating forward and backward coherent random lasers simultaneously in a single channel, resulting in highly diverse mode variations. After post-processing steps such as third-order difference calculations and exclusive-or (XOR) logic operations, we generated a random number sequence for the first time, to the best of our knowledge, based on the temporal fluctuations of biomimetic random laser coherent modes. The instantaneous generation rate reached a preliminary 40 Gbps. Moreover, the random bits satisfy requirements such as random distribution, independence, and absence of bias, successfully passing the NIST SP800-22 standard test, confirming the high quality of the random number sequence.

Promotion of Probabilistic Bit Generation in Mott Devices by Embedded Metal Nanoparticles

Considerable attention has been drawn to the use of volatile two-terminal devices relying on the Mott transition for the stochastic generation of probabilistic bits (p-bits) in emerging probabilistic computing. To improve randomness and endurance of bit streams provided by these devices, delicate control of the transient evolution of switchable domains is required to enhance stochastic p-bit generation. Herein, it is demonstrated that the randomness of p-bit streams generated via the consecutive pulse inputs of pump-probe protocols can be increased by the deliberate incorporation of metal nanoparticles (NPs), which influence the transient dynamics of the nanoscale metallic phase in VO2 Mott switches. Among the vertically stacked Pt-NP-containing VO2 threshold switches, those with higher Pt NP density show a considerably wider range of p-bit operation (e.g., up to ≈300% increase in ΔVprobe upon going from (Pt NP/VO2)0 to (Pt NP/VO2)11) and can therefore be operated under the conditions of high speed (400 kbit s-1), low power consumption (14 nJ per bit), and high stability (>105 200 bits) for p-bit generation. Thus, the study presents a novel strategy that exploits nanoscale phase control to maximize the generation of nondeterministic information sources for energy-efficient probabilistic computing hardware.

Massive and parallel 10 Tbit/s physical random bit generation with chaotic microcomb

Ultrafast physical random bit (PRB) generators and integrated schemes have proven to be valuable in a broad range of scientific and technological applications. In this study, we experimentally demonstrated a PRB scheme with a chaotic microcomb using a chip-scale integrated resonator. A microcomb contained hundreds of chaotic channels, and each comb tooth functioned as an entropy source for the PRB. First, a 12 Gbits/s PRB signal was obtained for each tooth channel with proper post-processing and passed the NIST Special Publication 800-22 statistical tests. The chaotic microcomb covered a wavelength range from 1430 to 1675 nm with a free spectral range (FSR) of 100 GHz. Consequently, the combined random bit sequence could achieve an ultra-high rate of about 4 Tbits/s (12 Gbits/s × 294 = 3.528 Tbits/s), with 294 teeth in the experimental microcomb. Additionally, denser microcombs were experimentally realized using an integrated resonator with 33.6 GHz FSR. A total of 805 chaotic comb teeth were observed and covered the wavelength range from 1430 to 1670 nm. In each tooth channel, 12 Gbits/s random sequences was generated, which passed the NIST test. Consequently, the total rate of the PRB was approximately 10 Tbits/s (12 Gbits/s × 805 = 9.66 Tbits/s). These results could offer potential chip solutions of Pbits/s PRB with the features of low cost and a high degree of parallelism.

Learned pseudo-random number generator: WGAN-GP for generating statistically robust random numbers

Pseudo-random number generators (PRNGs) are software algorithms generating a sequence of numbers approximating the properties of random numbers. They are critical components in many information systems that require unpredictable and nonarbitrary behaviors, such as parameter configuration in machine learning, gaming, cryptography, and simulation. A PRNG is commonly validated through a statistical test suite, such as NIST SP 800-22rev1a (NIST test suite), to evaluate its robustness and the randomness of the numbers. In this paper, we propose a Wasserstein distance-based generative adversarial network (WGAN) approach to generating PRNGs that fully satisfy the NIST test suite. In this approach, the existing Mersenne Twister (MT) PRNG is learned without implementing any mathematical programming code. We remove the dropout layers from the conventional WGAN network to learn random numbers distributed in the entire feature space because the nearly infinite amount of data can suppress the overfitting problems that occur without dropout layers. We conduct experimental studies to evaluate our learned pseudo-random number generator (LPRNG) by adopting cosine-function-based numbers with poor random number properties according to the NIST test suite as seed numbers. The experimental results show that our LPRNG successfully converted the sequence of seed numbers to random numbers that fully satisfy the NIST test suite. This study opens the way for the "democratization" of PRNGs through the end-to-end learning of conventional PRNGs, which means that PRNGs can be generated without deep mathematical know-how. Such tailor-made PRNGs will effectively enhance the unpredictability and nonarbitrariness of a wide range of information systems, even if the seed numbers can be revealed by reverse engineering. The experimental results also show that overfitting was observed after about 450,000 trials of learning, suggesting that there is an upper limit to the number of learning counts for a fixed-size neural network, even when learning with unlimited data.

On multiplexing in physical random number generation, and conserved total entropy content

In the current article, we use a random supercontinuum based on a random Raman distributed feedback laser to investigate the generation of random numbers by spectrally demultiplexing the broad supercontinuum spectrum in parallel channels. By tuning the spectral separation between two independent channels, we test the most typically used statistical tests' abilities to identify the required minimum spectral separation between channels, especially after the use of post-processing steps. Out of all the tests that were investigated, the cross-correlation across channels using the raw data appears to be the most robust. We also demonstrate that the use of post-processing steps, either least significant bits extraction or exclusive-OR operations, hinders the ability of these tests to detect the existing correlations. As such, performing these tests on post-processed data, often reported in literature, is insufficient to properly establish the independence of two parallel channels. We therefore present a methodology, which may be used to confirm the true randomness of parallel random number generation schemes. Finally, we demonstrate that, while tuning a single channel's bandwidth can modify its potential randomness output, it also affects the number of available channels, such that the total random number generation bitrate is conserved.

Chaotic microlasers caused by internal mode interaction for random number generation

Chaotic semiconductor lasers have been widely investigated for generating unpredictable random numbers, especially for lasers with external optical feedback. Nevertheless, chaotic lasers under external feedback are hindered by external feedback loop time, which causes correlation peaks for chaotic output. Here, we demonstrate the first self-chaotic microlaser based on internal mode interaction for a dual-mode microcavity laser, and realize random number generation using the self-chaotic laser output. By adjusting mode frequency interval close to the intrinsic relaxation oscillation frequency, nonlinear dynamics including self-chaos and period-oscillations are predicted and realized numerically and experimentally due to internal mode interaction. The internal mode interaction and corresponding carrier spatial oscillations pave the way of mode engineering for nonlinear dynamics in a solitary laser. Our findings provide a novel and easy method to create controllable and robust optical chaos for high-speed random number generation.

Massively parallel ultrafast random bit generation with a chip-scale laser

Random numbers are widely used for information security, cryptography, stochastic modeling, and quantum simulations. Key technical challenges for physical random number generation are speed and scalability. We demonstrate a method for ultrafast generation of hundreds of random bit streams in parallel with a single laser diode. Spatiotemporal interference of many lasing modes in a specially designed cavity is introduced as a scheme for greatly accelerated random bit generation. Spontaneous emission, caused by quantum fluctuations, produces stochastic noise that makes the bit streams unpredictable. We achieve a total bit rate of 250 terabits per second with off-line postprocessing, which is more than two orders of magnitude higher than the current postprocessing record. Our approach is robust, compact, and energy-efficient, with potential applications in secure communication and high-performance computation.

Real-time all-optical random numbers based on optical Boolean chaos

In this work, a method of generating all-optical random numbers based on optical Boolean chaotic entropy source is proposed. This all-optical random number generation system consists of a Boolean chaotic entropy source and an optical D flip-flop. The Boolean chaotic entropy source is composed of an optical XOR gate and two self-delayed feedback; meanwhile, the optical D flip-flop is composed of two optical AND gates and one SR latch. The optical Boolean chaotic signal possesses the dynamic characteristics of complexity and binarization, so random numbers would be generated only by extracted from chaotic signals with the optical D flip-flop. This all-optical random number generation system achieves the result of 5 Gb/s random numbers that is testable. The whole process of random number generation could be completed in the optical domain without photoelectric conversion, more importantly, the device could be integrated.

Entropy rate of chaos in an optically injected semiconductor laser for physical random number generation

We evaluate the (ɛ, τ) entropy of chaotic laser outputs generated by an optically injected semiconductor laser for physical random number generation. The vertical resolution ɛ and sampling time τ are numerically optimized by comparing the (ɛ, τ) entropy with the Kolmogorov-Sinai entropy, which is estimated from the Lyapunov exponents using linearized model equations. We then investigate the dependence of the (ɛ, τ) entropy on the optical injection strength of the laser system. In addition, we evaluate the (ɛ, τ) entropy from the experimentally obtained chaotic temporal waveforms in an optically injected semiconductor laser. Random bits with an entropy close to one bit per sampling point are extracted to satisfy the conditions of physical random number generation. We find that the extraction of the third-most significant bit from eight-bit experimental chaotic data results in an entropy of one bit per sample for certified physical random number generation.

Atmospheric pressure air microplasma current time series for true random bit generation

Generating true random bits of high quality at high data rates is usually viewed as a challenging task. To do so, physical sources of entropy with wide bandwidth are required which are able to provide truly random bits and not pseudorandom bits, as it is the case with deterministic algorithms and chaotic systems. In this work we demonstrate a reliable high-speed true random bit generator (TRBG) device based on the unpredictable electrical current time series of atmospheric pressure air microplasma (APAMP). After binarization of the sampled current time series, no further post-processing was needed in order for the bitstreams to pass all 15 tests of the NIST SP 800-22 statistical test suite. Several configurations of the system have been successfully tested at different sampling rates up to 100 MS/s, and with different inter-electrode distances giving visible/non-visible optical emissions. The cost-effectiveness, simplicity and ease of implementation of the proposed APAMP system compared to others makes it a very promising solution for portable TRBGs.

Gbps physical random bit generation based on the mesoscopic chaos of a silicon photonics crystal microcavity

We present an experimental and theoretical physical random bit (PRB) generator using the mesoscopic chaos from a photonic-crystal optomechanical microcavity with a size of ∼10µm and very low operating intracavity energy of ∼60 Femto-Joule that was fabricated with CMOS compatible processes. Moreover, two kinds of PRB generation were proposed with rates over gigabits per second (Gbps). The randomness of the large PRB strings was further verified using the NIST Special Publication 800-22. In addition, the Diehard statistical test was also used to confirm the quality of the obtained PRBs. The results of this study can offer a new generation of dedicated PRB solutions that can be integrated on Si substrates, which can speed up systems and eliminate reliance on external mechanisms for randomness collection.

Entropy evaluation of white chaos generated by optical heterodyne for certifying physical random number generators

The entropy of white chaos is evaluated to certify physical random number generators. White chaos is generated from the electric subtraction of two optical heterodyne signals of two chaotic outputs in semiconductor lasers with optical feedback. We use the statistical test suites of NIST Special Publication 800-90B for the evaluation of physical entropy sources of white chaos with an eight-bit resolution. The minimum value of entropy is 2.1 for eight most significant bits data. The entropy of white chaos is enhanced from that of the chaotic output of the semiconductor lasers. We evaluate the effect of detection noise and distinguish between the entropy that originates from the white chaos and the detection noise. It is found that the entropy of five most significant bits originates from white chaos. The minimum value of entropy is 1.1 for five most significant bits data, and it is considered that the entropy can be obtained at at least one bit per sample.

Ultrafast physical random bit generation from a chaotic oscillator with a silicon modulator

We demonstrate physical random bit (PRB) generation from two chaotic optoelectronic oscillators (OEOs) with silicon Mach-Zehnder and microring resonator modulators. The carrier-injection modulation and the beam interference provide the nonlinearity for the OEO. We digitalize the chaotic waveforms from the two OEOs at 40 GS/s with 8-bit resolution and use self-delay bitwise exclusive-or operation as a post-processing method. The randomness of the resulting 320 Gbps PRB sequences is verified by the National Institute of Standards and Technology Special Publication 800-22 statistical tests. With the progress of silicon photonic circuits, there is a potential to fabricate a monolithic chaotic OEO chip for compact PRB generation.

Real-time online photonic random number generation

We present a real-time scheme for ultrafast random number (RN) extraction from a broadband photonic entropy source. Ultralow jitter mode-locked pulses are used to sample the stochastic intensity fluctuations of the entropy source in the optical domain. A discrete self-delay comparison technology is exploited to quantize the sampled pulses into continuous RN streams directly. This scheme is bias free, eliminates the electronic jitter bottleneck confronted by currently available physical RN generators, and has no need for threshold tuning and post-processing. To demonstrate its feasibility, we perform a proof-of-principle experiment using an optically injected chaotic laser diode. RN streams at up to 7  Gb/s with verified randomness were thereby successfully extracted in real time. With the provision of a photonic entropy source with sufficient bandwidth, the present approach is expected to provide RN generation rates of several tens of gigabits per second.

640-Gbit/s fast physical random number generation using a broadband chaotic semiconductor laser

An ultra-fast physical random number generator is demonstrated utilizing a photonic integrated device based broadband chaotic source with a simple post data processing method. The compact chaotic source is implemented by using a monolithic integrated dual-mode amplified feedback laser (AFL) with self-injection, where a robust chaotic signal with RF frequency coverage of above 50 GHz and flatness of ±3.6 dB is generated. By using 4-least significant bits (LSBs) retaining from the 8-bit digitization of the chaotic waveform, random sequences with a bit-rate up to 640 Gbit/s (160 GS/s × 4 bits) are realized. The generated random bits have passed each of the fifteen NIST statistics tests (NIST SP800-22), indicating its randomness for practical applications.

Real-time fast physical random number generator with a photonic integrated circuit

Random number generators are essential for applications in information security and numerical simulations. Most optical-chaos-based random number generators produce random bit sequences by offline post-processing with large optical components. We demonstrate a real-time hardware implementation of a fast physical random number generator with a photonic integrated circuit and a field programmable gate array (FPGA) electronic board. We generate 1-Tbit random bit sequences and evaluate their statistical randomness using NIST Special Publication 800-22 and TestU01. All of the BigCrush tests in TestU01 are passed using 410-Gbit random bit sequences. A maximum real-time generation rate of 21.1 Gb/s is achieved for random bit sequences in binary format stored in a computer, which can be directly used for applications involving secret keys in cryptography and random seeds in large-scale numerical simulations.

Quantum random number generator based on twin beams

We produce two strings of quantum random numbers simultaneously from the intensity fluctuations of the twin beams generated by a nondegenerate optical parametric oscillator. Two strings of quantum random numbers with bit rates up to 60 Mb/s are extracted simultaneously with a suitable post-processing algorithm. By post-selecting the identical data from two raw sequences and using a suitable hash function, we also extract two strings of identical quantum random numbers. The obtained random numbers pass all NIST randomness tests. The presented scheme shows the feasibility of generating quantum random numbers from the intensity of a macroscopic optical field.

Randomness evaluation for an optically injected chaotic semiconductor laser by attractor reconstruction

State-space reconstruction is investigated for evaluating the randomness generated by an optically injected semiconductor laser in chaos. The reconstruction of the attractor requires only the emission intensity time series, allowing both experimental and numerical evaluations with good qualitative agreement. The randomness generation is evaluated by the divergence of neighboring states, which is quantified by the time-dependent exponents (TDEs) as well as the associated entropies. Averaged over the entire attractor, the mean TDE is observed to be positive as it increases with the evolution time through chaotic mixing. At a constant laser noise strength, the mean TDE for chaos is observed to be greater than that for periodic dynamics, as attributed to the effect of noise amplification by chaos. After discretization, the Shannon entropies continually generated by the laser for the output bits are estimated in providing a fundamental basis for random bit generation, where a combined output bit rate reaching 200 Gb/s is illustrated using practical tests. Overall, based on the reconstructed states, the TDEs and entropies offer a direct experimental verification of the randomness generated in the chaotic laser.