Structure analysis of poly(N-isopropylacrylamide) using near-infrared spectroscopy and generalized two-dimensional correlation infrared spectroscopy

Reversibly Adhesive, Anti-Swelling, and Antibacterial Hydrogels for Tooth-Extraction Wound Healing

Oral wound treatment faces challenges due to the complex oral environment, thus, sealing the wound quickly becomes necessary. Although some materials have achieved adhesion and sterilization, how to effectively solve the contradiction between strong adhesion and on-demand removal remains a challenge. Herein, a reversibly adhesive hydrogel is designed by free radical copolymerization of cationic monomer [2-(acryloyloxy) ethyl] trimethylammonium chloride (ATAC), hydrophobic monomer ethylene glycol phenyl ether acrylate (PEA) and N-isopropylacrylamide (NIPAAm). The cationic quaternary ammonium salts provide electrostatic interactions, the hydrophobic groups provide hydrophobic interactions, and the PNIPAAm chain segments provide hydrogen bonding, leading to strong adhesion. Therefore, the hydrogel obtains an adhesion strength of 18.67 KPa to oral mucosa and can seal wounds fast within 10 s. Furthermore, unlike pure PNIPAAm, the hydrogel has a lower critical solution temperature of 40.3 °C due to the contribution of ATAC and PEA, enabling rapid removal with 40 °C water after treatment. In addition, the hydrogel realizes excellent anti-swelling ratio (≈80%) and antibacterial efficiency (over 90%). Animal experiments prove that the hydrogel effectively reduces inflammation infiltration, promotes collagen deposition and vascular regeneration. Thus, hydrogel as a multi-functional dressing has great application prospects in oral wound management.

Double Stimuli-Responsive di- and Triblock Copolymers of Poly(N-isopropylacrylamide) and Poly(1-vinylimidazole): Synthesis and Self-Assembly

For the first time, double stimuli-responsive properties of poly(N-isopropylacrylamide) (PNIPA) and poly(1-vinylimidazole) (PVIM) block copolymers in aqueous solutions were studied. The synthesis of PNIPA₆₀-b-PVIM₉₀ and PNIPA₂₈-b-PVIM₆₂-b-PNIPA₂₉ was performed using reversible addition-fragmentation chain transfer (RAFT) polymerization. The polymers were characterized by size exclusion chromatography and ¹H NMR spectroscopy. The conformational behavior of the polymers was studied using dynamic light scattering (DLS) and fluorescence spectroscopy (FS). It was found that PNIPA and block copolymers conformation and ability for self-assembly in aqueous medium below and above cloud point temperature depend on the locus of hydrophobic groups derived from the RAFT agent within the chain. Additionally, the length of PVIM block, its locus in the chain and charge perform an important role in the stabilization of macromolecular micelles and aggregates below and above cloud point temperature. At 25 °C the average hydrodynamic radius (R_h) of the block copolymer particles at pH 3 is lower than at pH 9 implying the self-assembling of macromolecules in the latter case. Cloud points of PNIPA₆₀-b-PVIM₉₀ are ~43 °C and ~37 °C at a pH of 3 and 9 and of PNIPA₂₈-b-PVIM₆₂-b-PNIPA₂₉ they are ~35 °C and 31 °C at a pH of 3 and 9. Around cloud point independently of pH, the R_h value for triblock copolymer rises sharply, achieves the maximum value, then falls and reaches the constant value, while for diblock copolymer, it steadily grows after reaching cloud point. The information about polarity of microenvironment around polymer obtained by FS accords with DLS data.

Rapid Oxygen-Tolerant Synthesis of Protein-Polymer Bioconjugates via Aqueous Copper-Mediated Polymerization

The synthesis of protein-polymer conjugates usually requires extensive and costly deoxygenation procedures, thus limiting their availability and potential applications. In this work, we report the ultrafast synthesis of polymer-protein bioconjugates in the absence of any external deoxygenation via an aqueous copper-mediated methodology. Within 10 min and in the absence of any external stimulus such as light (which may limit the monomer scope and/or disrupt the secondary structure of the protein), a range of hydrophobic and hydrophilic monomers could be successfully grafted from a BSA macroinitiator, yielding well-defined polymer-protein bioconjugates at quantitative yields. Our approach is compatible with a wide range of monomer classes such as (meth) acrylates, styrene, and acrylamides as well as multiple macroinitiators including BSA, BSA nanoparticles, and beta-galactosidase from Aspergillus oryzae. Notably, the synthesis of challenging protein-polymer-polymer triblock copolymers was also demonstrated, thus significantly expanding the scope of our strategy. Importantly, both lower and higher scale polymerizations (from 0.2 to 35 mL) were possible without compromising the overall efficiency and the final yields. This simple methodology paves the way for a plethora of applications in aqueous solutions without the need of external stimuli or tedious deoxygenation.

Revealing the interactions of water with cryoprotectant and protein by near-infrared spectroscopy

Taking formamide (FA) as a model compound of protein, the water structure in the ternary mixtures of dimethyl sulfoxide (DMSO)-water-FA was studied by near-infrared (NIR) spectroscopy. The interaction of DMSO and water, and the effect of FA on the interaction, were analyzed with the help of chemometric methods. Continuous wavelet transform (CWT) was used to enhance the resolution of the spectra. A peak at 6437 cm^-1 depicting the interaction of DMSO and water through hydrogen bonding (SO…HO) was observed in the transformed spectra. When FA exists in the mixture, the intensity of the peak decreases with the increase of formamide content, showing that FA may replace the water to form the hydrogen bond of SO and HN. In addition, temperature-dependent NIR spectroscopy was used to analyze the effect of the three components on the spectral variation with temperature. Analyzing the spectral data by alternating trilinear decomposition (ATLD) and multiple linear regression, two varying spectral features were obtained that are related to water and DMSO, but no spectral feature was found that significantly varies with the content of FA. The result implies that DMSO is still the key component to prevent the water from icing, although FA may reduce slightly the anti-freezing effect.

Development of Thermally Responsive PolyNIPAm Microcarrier for Application of Cell Culturing-Part I: A Feasibility Study

Poly(N-isopropylacrylamide) (polyNIPAm) microspheres were synthesized via the suspension polymerization technique. Thermal and redox initiators were compared for the polymerization, in order to study the effect of initiator type on the surface charge and particle size of polyNIPAm microspheres. The successful polymerization of NIPAm was confirmed by FTIR analysis. Microspheres of diameter >50 µm were synthesized when a pair of ammonium persulfate (APS) and N,N,N',N'-tetramethylene-diamine (TEMED) redox initiators was used, whilst relatively small microspheres of ~1 µm diameter were produced using an Azobis-isobutyronitrile (AIBN) thermal initiator. Hence, suspension polymerization using a redox initiator pair was found to be more appropriate for the synthesis of polyNIPAm microspheres of a size suitable for human embryonic kidney (HEK) cell culturing. However, the zeta potential of polyNIPAm microspheres prepared using an APS/TEMED redox initiator was significantly more negative than AIBN thermal initiator prepared microspheres and acted to inhibit cell attachment. Conversely, strong cell attachment was observed in the case of polyNIPAm microspheres of diameter ~90 µm, prepared using an APS/TEMED redox initiator in the presence of a cetyl trimethyl ammonium bromide (CTAB) cationic surfactant; demonstrating that surface charge modified polyNIPAm microspheres have great potential for use in cell culturing.

Understanding the effect of urea on the phase transition of poly(N-isopropylacrylamide) in aqueous solution by temperature-dependent near-infrared spectroscopy

Regulating the folding state by denaturants is essential for the structure and function of proteins. Poly(N-isopropyl acrylamide) (PNIPAM) is usually regarded as a model for protein denaturation. The effects of urea, as a denaturant, on the aggregations of PNIPAM was studied by temperature-dependent near-infrared (NIR) spectroscopy, and particularly the variation of water structures was analyzed. The NIR spectra of the polymer-urea solutions containing different polymer concentrations were measured at different temperatures. N-way principal component analysis (NPCA) was performed to observe the spectral information. Three principal components (PCs) containing the spectral information of CH groups were obtained, showing three kinds of CH in the system. Obvious dehydration of the three CH groups occurs at 27.5 °C in solution, but the temperature turns to 27 °C for two kinds of the CH and 26.5 °C for the third one, respectively, in the urea-add solution. The effect of urea on the formation of the intramolecular hydrogen bonds that promotes polymer folding is suggested. The spectral information of NH in urea molecule indicates that the direct interaction of urea and polymer facilitates the stability of the polymer globule state. Furthermore, the spectral information of OH shows that the release of the water molecules with three hydrogen bonds (S₃), which may connect the NH and CO groups in PNIPAM in solution, leads to the phase transition. When urea is added, urea may reduce the content of the S₃ water to facilitate the release, making the phase transition at a low temperature.

Characterization of the phase transition mechanism of P(NiPAAm-co-AAc) copolymer hydrogel using 2D correlation IR spectroscopy

A thermo-responsive polymer, poly(N-isopropylacrylamide) (PNiPAAm), was copolymerized with acrylic acid (AAc) in this study. Its phase transitions during the heating and cooling processes were investigated using IR spectroscopy, principal component analysis (PCA), and two-dimensional correlation spectroscopy (2D-COS). During the heating process, the hydrogen bonding between side chain in P(NiPAAm-co-AAc) copolymer hydrogel and H₂O was broken first, and then the formation of the intramolecular interaction in P(NiPAAm-co-AAc) copolymer hydrogel occurred. However, unlike the heating process, intensities of bands in the CH stretching region were changed before those in the CO stretching including the NH bending region during the cooling process. The results indicate that the phase transition of P(NiPAAm-co-AAc) copolymer hydrogel is an irreversible process at the molecular levels.

Tuning the Thermoresponsive Behavior of Surface-Attached PNIPAM Networks: Varying the Crosslinker Content in SI-ATRP

The synthesis and thermoresponsive properties of surface-attached poly(N-isopropylacrylamide)-co-N,N'-methylene bisacrylamide (PNIPAM-co-MBAM) networks are investigated. The networks are formed via SI-ARGET-ATRP ("grafting-from") on thiol-based initiator-functionalized gold films. This method is reliable, well controlled, fast, and applicable to patterned surfaces (e.g., nanopores) for networks with dry thicknesses >20 nm. Surface-attached PNIPAM-co-MBAM gels are swollen below their volume phase transition temperature but above collapse without complete expulsion of water (retain ∼50 vol %). The swelling/collapse transition is studied using complementary SPR and QCMD techniques. The ratio between swollen and collapsed heights characterizes the thermoresponsive behavior and is shown to not depend on network height but to vary with MBAM content. The higher the proportion of the crosslinker, the lower the magnitude of the phase transition, until all responsiveness is lost at 5 mol % MBAM. The temperature range of the transition is broadened for more crosslinked PNIPAM-co-MBAM gels but remains centered around 32 °C. Upon reswelling, less crosslinked networks display sharp transitions, while for those containing ≥3 mol % MBAM, transitions remain broad. This tunable behavior persists for gels on nanostructured gold surfaces. Investigating PNIPAM-co-MBAM networks on gold plasmonic nanowell arrays is a starting point for expanding their scope as thermo-controlled nanoactuators.

Grafting versus Crosslinking of Silk Fibroin-g-PNIPAM via Tyrosine-NIPAM Bridges

This paper reports the synthesis and complex characterization of novel polymeric networks based on the crosslinking of Bombyx mori silk fibroin via poly(N-isopropylacrylamide) bridges generated by an ammonium cerium nitrate redox system. The research study gives an understanding of the polymerization mechanism in terms of the generation of radical sites, radical growth and termination reaction, as well as the involvement of modifications on silk fibroin structure and properties. The physico-chemical characterization was carried out by FTIR-ATR, X-ray photoelectron spectroscopy and RAMAN spectroscopy with unravelling the chemical modification. The structural characterization and spatial arrangement by secondary structure were carried out by X-ray diffraction and circular dichroism. The thermal behavior and thermal stability were evaluated by differential scanning calorimetry and thermogravimetric analysis. The novel complex polymer network is intended to be used in the field of smart drug delivery systems.

Understanding the role of water in the aggregation of poly(N,N-dimethylaminoethyl methacrylate) in aqueous solution using temperature-dependent near-infrared spectroscopy

For understanding the role of water in the aggregation of polymers, the variation of water structures with the structural change of polymers in the process of aggregation was studied by temperature-dependent near-infrared (NIR) spectroscopy. The NIR spectra of the aqueous poly(N,N-dimethylaminoethyl methacrylate) (PDMAEMA) solutions of different concentrations were measured at different temperatures. The spectral changes of the polymer and water with temperature were analyzed by N-way principal component analysis (NPCA). It was found that, at low concentration, the chains of the polymer tend to form a loose hydrophobic structure below 36 °C and then aggregate into a micelle at a lower critical solution temperature (LCST) of around 39 °C. In the process of the aggregation, the water species with two hydrogen bonds (S2) increases gradually before 36 °C and then a sudden decrease occurs after that temperature. The results clearly indicate that water species S2 plays an important role in the formation of the intermediate, i.e., the loose hydrophobic structure of the polymer chains linked by the two hydrogen bonds of S2 water. When the temperature increases, the dissociation of the hydrogen bonds enables the intermediate to be destroyed to form a micelle structure. For the high concentration solution, however, the spectral information of S2 was not found in the aggregation, suggesting direct formation of the micelle from the dehydrated chains.

Thickness-Dependent Swelling Behavior of Vapor-Deposited Smart Polymer Thin Films

In this contribution, the temperature-dependent swelling behavior of vapor-deposited smart polymer thin films is shown to depend on cross-linking and deposited film thickness. Smart polymers find application in sensor and actuator setups and are mostly fabricated on delicate substrates with complex nanostructures that need to be conformally coated. As initiated chemical vapor deposition (iCVD) meets these specific requirements, the present work concentrates on temperature-dependent swelling behavior of iCVD poly(N-isopropylacrylamide) thin films. The transition between swollen and shrunken state and the corresponding lower critical solution temperature (LCST) was investigated by spectroscopic ellipsometry in water. The films' density in the dry state evaluated from X-ray reflectivity could be successfully correlated to the position of the LCST in water and was found to vary between 1.1 and 1.3 g/cm³ in the thickness range 30-330 nm. This work emphasizes the importance of insights in both the deposition process and mechanisms during swelling of smart polymeric structures.

Poly(N-isopropylacrylamide) modified polydopamine as a temperature-responsive surface for cultivation and harvest of mesenchymal stem cells

A thermo-responsive surface was fabricated by depositing poly(N-isopropylacrylamide) (PNIPAAm) onto polydopamine coated cell culture substrata through free radical polymerization for the purpose of culturing and harvesting human mesenchymal stem cells (hMSCs). Human MSCs were cultured onto the PNIPAAm-g-polydopamine coated surface and harvested by changing from physiological to ambient temperature. The produced PNIPAAm-g-polydopamine surface was characterized by atomic force microscopy, Fourier transform infrared spectroscopy, nuclear magnetic resonance, water contact angle measurement, differential scanning calorimetry, and cell culture studies. Our results revealed that hMSCs could be detached from the PNIPAAm-g-polydopamine surface within 60 min after switching the temperature from 37 °C to room temperature. The detached hMSCs were able to proliferate on the PNIPAAm-g-polydopamine coated surface for further growth and harvest.

A molecular level study of the phase transition process of hydrogen-bonding UCST polymers

A molecular level study of the UCST-type transition process of PNAGA-based polymers in water and a water/methanol mixture.

The Role of Backbone Hydration of Poly(N-isopropyl acrylamide) Across the Volume Phase Transition Compared to its Monomer

Thermo-responsive polymers undergo a reversible coil-to-globule transition in water after which the chains collapse and aggregate into bigger globules when passing to above its lower critical solution temperature (LCST). The hydrogen bonding with the amide groups in the side chains has to be contrasted with the hydration interaction of the hydrophobic main-chain hydrocarbons. In the present investigation we study molecular changes in the polymer poly(N-isopropyl acrylamide) (PNIPAM) and in its monomer N-isopropyl acrylamide (NIPAM) in solution across the LCST transition. Employing Fourier-transform infrared spectroscopy we probe changes in conformation and hydrogen bonding. We observe a nearly discontinuous shift of the peak frequencies and areas of vibrational bands across the LCST transition for PNIPAM whereas NIPAM exhibits a continuous linear change with temperature. This supports the crucial role of the polymer backbone with respect to hydration changes in the amide group in combination with cooperative interactions of bound water along the backbone chain.

Pressure-Dependence of Poly(N-isopropylacrylamide) Mesoglobule Formation in Aqueous Solution

Above their cloud point, aqueous solutions of the thermoresponsive polymer poly(N-isopropylacrylamide) (PNIPAM) form large mesoglobules. We have carried out very small-angle neutron scattering (VSANS with q = 0.21-2.3 × 10^-3 Å^-1) and Raman spectroscopy experiments on a 3 wt % PNIPAM solution in D₂O at atmospheric and elevated pressures (up to 113 MPa). Raman spectroscopy reveals that, at high pressure, the polymer is less dehydrated upon crossing the cloud point. VSANS shows that the mesoglobules are significantly larger and contain more D₂O than at atmospheric pressure. We conclude that the size of the mesoglobules and thus their growth process are closely related to the hydration state of PNIPAM.

Effect of Network Density in Surface-Anchored Poly(N-isopropylacrylamide) Hydrogels on Adsorption of Fibrinogen

We describe a simple approach to generate surface-attached biocompatible hydrogels with tunable cross-link density and employ them to study the effect of gel structure on protein adsorption. Using free-radical polymerization, we synthesize a series of random copolymers comprising N-isopropylacrylamide (NIPAm) and the photoactive curing agent 4-methacryloyl-oxy-benzophenone (MABP) of mole fractions ranging from 2.5 to 10%. We deposit a thin film of the precursor copolymer (∼150 nm) on a silicon or glass substrate, which is precoated with monolayers of benzophenone-silane, then cross-link it through UV irradiation at 365 nm (dose ≈ 6-10 J/cm²) to generate surface-attached networks. A systematic investigation of the network properties such as gel fraction, cross-link density, and swelling ratio reveals that gels with higher MABP content (≥5%) produce densely cross-linked hydrophobic networks with low or no swelling in an aqueous medium. We study the adsorption of fibrinogen (Fg) on such hydrogel substrates and establish that the amount of adsorbed Fg depends on the degree of cross-linking and the swelling capacity of the networks. Specifically, although Fg adsorbs heavily on denser networks, loosely bound gels that swell in aqueous medium repel proteins. We attribute the latter behavior to entropic shielding and size-exclusion factors.

Two-step volume phase transition mechanism of poly(N-vinylcaprolactam) hydrogel online-tracked by two-dimensional correlation spectroscopy

The volume phase transition of PVCL hydrogel was online-tracked by 2D correlation FTIR spectroscopy, and a two-step mechanism was proposed.

A thermoresponsive, micro-roughened cell culture surface

Surface topography has been shown to play a major role in cell behavior, but has yet to be seriously exploited in the field of cell surface engineering. In the present work, surface roughness has been used in combination with the thermoresponsive polymer polyisopropylacrylamide (PIPAAm) to generate cell sheets with tailored biochemical properties. Micro-roughened polystyrene (PS) with 1.5-5.5 μm features was derivatized with PIPAAm to form a cell culture surface for the growth of human fibroblast cell sheets that exhibit a modified cytoskeleton and extracellular matrix. Fibroblasts cell sheets cultured on the rough surfaces had fewer actin stress fibers and twice the average fibronectin (FN) fibril formation when compared to cell sheets on flat substrates. The cell sheets harvested from the roughened PS were collected after only 2 days of culture and detached from the PIPAAm grafted surface in <1h after cooling the culture system. The simple and rapid method for generating cell sheets with increased FN fibril formation has applications in tissue grafts or wound repair and has demonstrated that the thermoresponsive surface can be used for reliable cell sheet formation.

Thermoresponsive antimicrobial wound dressings via simultaneous thiol-ene polymerization and in situ generation of silver nanoparticles

Thermoresponsive and antimicrobial wound dressing via thiol-ene polymerization reaction.

Preparation of glucose-responsive and fluorescent micelles via a combination of RAFT polymerization and chemoenzymatic transesterification for controlled release of insulin

Polymeric micelles with glucose-responsive and fluorescent features have been synthesized using a one-pot method via a combination of RAFT polymerization and chemoenzymatic tranesterification for controlled release of insulin in vitro.

A thermoresponsive biodegradable polymer with intrinsic antioxidant properties

Oxidative stress in tissue can contribute to chronic inflammation that impairs wound healing and the efficacy of cell-based therapies and medical devices. We describe the synthesis and characterization of a biodegradable, thermoresponsive gel with intrinsic antioxidant properties suitable for the delivery of therapeutics. Citric acid, poly(ethylene glycol) (PEG), and poly-N-isopropylacrylamide (PNIPAAm) were copolymerized by sequential polycondensation and radical polymerization to produce poly(polyethylene glycol citrate-co-N-isopropylacrylamide) (PPCN). PPCN was chemically characterized, and the thermoresponsive behavior, antioxidant properties, morphology, potential for protein and cell delivery, and tissue compatibility in vivo were evaluated. The PPCN gel has a lower critical solution temperature (LCST) of 26 °C and exhibits intrinsic antioxidant properties based on its ability to scavenge free radicals, chelate metal ions, and inhibit lipid peroxidation. PPCN displays a hierarchical architecture of micropores and nanofibers, and contrary to typical thermoresponsive polymers, such as PNIPAAm, PPCN gel maintains its volume upon formation. PPCN efficiently entrapped and slowly released the chemokine SDF-1α and supported the viability and proliferation of vascular cells. Subcutaneous injections in rats showed that PPCN gels are resorbed over time and new connective tissue formation takes place without signs of significant inflammation. Ultimately, this intrinsically antioxidant, biodegradable, thermoresponsive gel could potentially be used as an injectable biomaterial for applications where oxidative stress in tissue is a concern.

Response mechanism of the phase transitions of poly(n-isopropylacrylamide-co-benzo-18-crown-6-acrylamide) using infrared spectroscopy

The thermal and ionic effects on the phase transitions of poly(N-isopropylacrylamide) (PNIPAAm) and its copolymer with benzo-18-crown-6-acrylamide, poly(N-isopropylacrylamide-co-benzo-18-crown-6-acrylamide) (PNIPAAm-co-BCAm), were investigated using infrared (IR) spectral variations of methyl (CH3), C=O, and amine (NH) groups. Subsequently, perturbation correlation moving-window two-dimensional correlation infrared spectroscopy (PCMW 2D-IR) was applied to clarify the differences in the phase-transition mechanisms of the polymers. The dominant influence on the phase-transition mechanism of PNIPAAm is whether the anion is evenly distributed in the bulk solution. The results show that the phase transition shifts to a lower temperature with increasing barium chloride (BaCl2) concentrations. In addition, the effect of the anion on the chemical group is homogeneous upon heating. As a result, the relevant transition temperature ranges have remain approximately constant. In contrast, the dominant influence on the phase-transition mechanism of PNIPAAm-co-BCAm is the interactions of the polymer chains with barium ions (Ba(2+)). The hydrophilic BCAm-Ba(2+) complexes distributed in the PNIPAAm-co-BCAm chain prevent the water molecules from leaving the polymer chains, which leads to an increase in the transition temperature and the complicated variation of the transition temperature range, as environmental stimuli-response behavior, with increasing BaCl2 concentrations.

Peptide/protein separation with cationic polymer brush nanosponges for MALDI-MS analysis

A cationic polymer nanobrush was synthesized, attached to a MALDI target, and used for the fractionation of peptides and proteins based on their pI, prior to analysis by MALDI-MS. The cationic polymer nanobrush was synthesized on a gold substrate by AIBN photoinitiated polymerization, using a 70:30 ratio of 2-aminoethyl methacrylate hydrochloride (AEMA):N-isopropylacrylamide (NIPAAM). This brush showed selectivity for adsorption of acidic peptides and proteins and allowed fractionation of simple two-component mixtures to be completed in less than 10 min. The brush-adsorbed biomolecules were recovered by treating the nanobrush with ammonium hydroxide, which effectively collapsed the brush, thereby releasing the trapped compounds for MALDI MS analysis. These results demonstrate that nanobrush can serve as a convenient platform for rapid fractionation of biomolecules prior to analysis by MALDI-MS.

Thermoresponsive polymer induced sweating surfaces as an efficient way to passively cool buildings

Buildings can be effectively cooled by a bioinspired sweating-like action based on thermoresponsive hydrogels (PNIPAM), which press out their stored water when exceeding the lower critical solution temperature. The surface temperature is reduced by 15 °C compared to that of a conventional hydrogel (pHEMA) and by 25 °C compared to the bare ground.

The study of release of chlorhexidine from preparations with modified thermosensitive poly-N-isopropylacrylamide microspheres

The aim of this study was to investigate and compare the release rates of chlorhexidine (CX) base entrapped in the polymeric beads of modified poly-N-isopropylacrylamides (pNIPAMs) at temperatures below and over the volume phase transition temperature (VPTT) of synthesized polymers: pNIPAM-A with terminal anionic groups resulting from potassium persulfate initiator, pNIPAM-B with cationic amidine terminal groups, and pNIPAM-C comprising anionic terminals, but with increased hydrophobicity maintained by the N-tert-butyl functional groups. The preparations, assessed in vitro below the VPTT, release an initial burst of CX at different time periods between 120 and 240 min, followed by a period of 24 h, when the rate of release remains approximately constant, approaching the zero-order kinetics; the release rates for the polymers beads are as follows: pNIPAM-C>pNIPAM-B>pNIPAM-A. The pattern of release rates at temperature over the VPTT is as follows: pNIPAM-C>pNIPAM-A>pNIPAM-B. In the presence of pNIPAM-C, the duration between the start of the release and the attained minimal inhibitory concentration (MIC) for most of the microbes, in conditions over the VPTT, increased from 60 to 90 min. The release prolongation could be ascribed to some interactions between the practically insoluble CX particle and the hydrophobic functional groups of the polymer.

Thermo-responsive poly(N-isopropylacrylamide) grafted onto microtextured poly(dimethylsiloxane) for aligned cell sheet engineering

Poly(N-isopropylacrylamide) (PNIPAAm)-grafted poly(dimethylsiloxane) (PDMS) offers an inexpensive, biocompatible, oxygen permeable, and easily microtextured thermo-responsive substrate for producing cell sheets. This study introduces a method of grafting PNIPAAm onto microtextured PDMS that is suitable for generating aligned vascular smooth muscle cell (VSMC) sheets. We examined a wide range of processing parameters in order to identify the conditions that led to acceptable sheet growth and detachment behavior. Substrates grafted under these conditions produced confluent cell sheets that fully detached in less than 10 min after lowering the culture temperature from 37 °C to 20 °C. The grafted layer thickness was determined to be 496±8 nm by atomic force microscopy. Surface characterization by Fourier transform infrared spectroscopy showed a relative grafting yield of 0.488±0.10, defined as the ratio of the PNIPAAm 1647 cm(-1) to the PDMS 2962 cm(-1) absorbance peaks. The water contact angle of the substrates was shown to change from 89.6° to 101.0° at 20 °C and 37 °C, respectively. We also found that cell behavior on PNIPAAm-grafted PDMS was not directly related to surface wettability or relative grafting densities.