Alginate ion adsorption on a TiO2 particle film and interactions of adsorbed alginate with calcium ions investigated by attenuated total reflection infrared (ATR-IR) spectroscopy

Degradation of pharmaceuticals in different water matrices by a solar homo/heterogeneous photo-Fenton process over modified alginate spheres

A solar homo/heterogeneous photo-Fenton process using five materials (Fe(II), Fe(III), mining waste, Fe(II)/mining waste, and Fe(III)/mining waste) supported on sodium alginate was used as a strategy to iron dosage for the degradation of eight pharmaceuticals in three different water matrices (distilled water, simulated wastewater, and hospital wastewater). Experiments were carried out in a photoreactor with a capacity of 1 L, using 3 g of iron-alginate spheres and an initial hydrogen peroxide concentration of 25 mg L^-1, at pH 5.0. All the materials prepared were characterized by different techniques. The Fe(III)-alginate spheres presented the best pharmaceutical degradation after a treatment time of 116 min. Nineteen transformation products generated during the solar photo-Fenton process were identified by liquid chromatography coupled to quadrupole time-of-flight mass spectrometry, using a purpose-built database developed for detecting these transformation products. Finally, the transformation products identified were classified according to their toxicity and predicted biodegradability.

Influence of Surface Functional Groups on Deposition and Release of TiO2 Nanoparticles

A clear understanding of the factors governing the deposition and release behaviors of engineered nanoparticles (NPs), such as TiO₂ NPs, is necessary for predicting their transport and fate in both natural and engineered aquatic environments. In this study, impacts of specific chemistries on TiO₂ NP deposition, as a function of TiO₂ NP concentration and ionic strength/valence, were investigated using self-assembled monolayers (SAMs) with five different ending chemical functionalities (-CH₃, -OH, -COOH, -NH₂, and -CONH₂). The fastest deposition and maximum deposition mass were observed on -NH₂, followed by -COOH, -CONH₂, -CH₃, and -OH, showing that contact angle and zeta potential of surfaces were not good indicators for predicting the deposition. Specific interactions, for instance, between -COOH and -CONH₂ and TiO₂, significantly affected their deposition. Deposition rate increased linearly with TiO₂ NP concentration; however, specific deposition rate was dependent on the type of SAMs. The increase of monovalent (Na⁺) and divalent (Ca²⁺) led to different changes in deposition rates for the SAMs due to different functionalities. Results also showed that favorable SAM (e.g., -NH₂) had lowered release of NPs compared to unfavorable surface (e.g., -OH). The obtained deposition and release behaviors will support more accurate prediction of the environmental fate of nanoparticles.

An Underwater Surface-Drying Peptide Inspired by a Mussel Adhesive Protein

Water hampers the formation of strong and durable bonds between adhesive polymers and solid surfaces, in turn hindering the development of adhesives for biomedical and marine applications. Inspired by mussel adhesion, a mussel foot protein homologue (mfp3S-pep) is designed, whose primary sequence is designed to mimic the pI, polyampholyte, and hydrophobic characteristics of the native protein. Noticeably, native protein and synthetic peptide exhibit similar abilities to self-coacervate at given pH and ionic strength. 3,4-dihydroxy-l-phenylalanine (Dopa) proves necessary for irreversible peptide adsorption to both TiO2 (anatase) and hydroxyapatite (HAP) surfaces, as confirmed by quartz crystal microbalance measurements, with the coacervate showing superior adsorption. The adsorption of Dopa-containing peptides is investigated by attenuated total reflection infrared spectroscopy, revealing initially bidentate coordinative bonds on TiO2, followed by H-bonded and eventually long-ranged electrostatic and Van der Waals interactions. On HAP, mfp3s-pep-3Dopa adsorption occurs predominantly via H-bond and outer-sphere complexes of the catechol groups. Importantly, only the Dopa-bearing compounds are able to remove interfacial water from the target surfaces, with the coacervate achieving the highest water displacement arising from its superior wetting properties. These findings provide an impetus for developing coacervated Dopa-functionalized peptides/polymers adhesive formulations for a variety of applications on wet polar surfaces.

Mussel adhesion is dictated by time-regulated secretion and molecular conformation of mussel adhesive proteins

Interfacial water constitutes a formidable barrier to strong surface bonding, hampering the development of water-resistant synthetic adhesives. Notwithstanding this obstacle, the Asian green mussel Perna viridis attaches firmly to underwater surfaces via a proteinaceous secretion (byssus). Extending beyond the currently known design principles of mussel adhesion, here we elucidate the precise time-regulated secretion of P. viridis mussel adhesive proteins. The vanguard 3,4-dihydroxy-L-phenylalanine (Dopa)-rich protein Pvfp-5 acts as an adhesive primer, overcoming repulsive hydration forces by displacing surface-bound water and generating strong surface adhesion. Using homology modelling and molecular dynamics simulations, we find that all mussel adhesive proteins are largely unordered, with Pvfp-5 adopting a disordered structure and elongated conformation whereby all Dopa residues reside on the protein surface. Time-regulated secretion and structural disorder of mussel adhesive proteins appear essential for optimizing extended nonspecific surface interactions and byssus' assembly. Our findings reveal molecular-scale principles to help the development of wet-resistant adhesives.

Potential-dependent surface-enhanced resonance Raman spectroscopy at nanostructured TiO2 : a case study on cytochrome b5

Nanostructured titanium dioxide (TiO2 ) electrodes, prepared by anodization of titanium, are employed to probe the electron-transfer process of cytochrome b5 (cyt b5 ) by surface-enhanced resonance Raman (SERR) spectroscopy. Concomitant with the increased nanoscopic surface roughness of TiO2 , achieved by raising the anodization voltage from 10 to 20 V, the enhancement factor increases from 2.4 to 8.6, which is rationalized by calculations of the electric field enhancement. Cyt b5 is immobilized on TiO2 under preservation of its native structure but it displays a non-ideal redox behavior due to the limited conductivity of the electrode material. The electron-transfer efficiency which depends on the crystalline phase of TiO2 has to be improved by appropriate doping for applications in bioelectrochemistry.

Molecular surface chemistry in marine bioadhesion

This review covers the in situ molecular physicochemical characterisation of bioadhesives at solid/liquid interfaces, with the aim of elucidating the adhesion strategies that lie at the root of marine biofouling. It focuses on three major foulers: mussels, algae and barnacles. The dispersal of these organisms, their colonisation of surfaces, and ultimately their survival rely critically on the ability of the organisms' larvae or spores to locate a favourable settlement site and undergo metamorphosis, thus initiating their sessile existence. Differences in the composition of adhesive secretions and the strategies employed for their temporary or permanent implementation exists between the larval and adult life stages. To date, only a few adhesive secretions from marine fouling organisms have been adequately described in terms of their chemical composition, and a survey revealed the presence of certain recurrent functional groups, specifically catechol, carboxylate, monoester-sulphate and -phosphate. This review will describe the binding modes of such functionalities to wet mineral/metal oxides surfaces. Such functionalities will be ranked based on their ability to bind to hydrophilic surfaces replacing surface-bound water (Langmuir adsorption constant) as well as other adsorbates (competitive adsorption). A plausible explanation for the propensity of the reviewed adhesive functionalities to bind to hydrous metal oxide surfaces will be given on the basis of the Hard and Soft Acids and Bases principle, Hofmeister effects and entropic considerations. From the in situ analysis of marine organism bioadhesives and adsorption studies of functionalities relevant to the bioadhesion process, insights can be gleaned for a knowledge-based innovation of antifouling strategies and the synthesis of strong, durable adhesive materials, which are suitable for implementation in wet environments.

In situ ATR FTIR study of dextrin adsorption on anatase TiO2

The adsorption of two dextrin-based polymers, a regular wheat dextrin (TY) and a carboxymethyl-substituted (CM) dextrin, onto an anatase TiO(2) particle film has been studied using in situ attenuated total reflection (ATR) FTIR spectroscopy. Infrared spectra of the polymer solutions and the polymer adsorbed at the anatase surface were acquired for two solution conditions: pH 3 and pH 9; below and above the isoelectric point (IEP) of anatase, respectively. Comparison of the polymer solution spectra and the adsorbed layer spectra highlighted a number of spectral differences that were attributed to involvement of the carboxyl group of CM Dextrin interacting with the anatase surface directly and the adsorption of oxidized dextrin chains in the case of regular dextrin (TY) at high pH. The adsorption/desorption kinetics were determined by monitoring spectral peaks of the pyranose ring of both polymers. Adsorption equilibrium was not established for Dextrin TY for many hours, whereas CM Dextrin reached equilibrium in its adsorption within 60 min. The extent of desorption of Dextrin TY (observed by flowing a background electrolyte dextrin-free solution) was extensive at both pH values, which reflects the poor affinity and binding of the polymer on anatase. In contrast, CM Dextrin underwent almost no desorption, indicating a high affinity between the carboxyl groups of the polymer and the anatase surface.