Spectroscopic characteristics of carbon dots (C-dots) derived from carbon fibers and conversion to sulfur-bridged C-dots nanosheets

Synthesis and physicochemical characterization of carbon quantum dots produced from folic acid

The rising interest in carbon dots (c-dots) is driven by their remarkable potential in the field of biomedical applications. This is due to their distinctive and adjustable photoluminescence characteristics, outstanding physicochemical properties, excellent photostability, and biocompatibility. Herein, carbon dots were successfully produced via the heat synthesis method and characterization for physical and chemical properties using UV-Vis spectrophotometer, photoluminescence spectroscopy, Fourier Transform Infrared and Raman spectroscopy, Energy-dispersive X-ray analysis, and quantum yield. The resulting carbon dots exhibited a distinct blue fluorescence upon exposure to ultraviolet radiation with a 366 nm wavelength. The photoluminescence spectrum of carbon dots displayed a fluorescence peak around 470 nm when excited with a 325 nm wavelength. The synthesized carbon dots demonstrated thermal stability and maintained photoluminescence intensity under different pH conditions, including neutral and alkaline mediums, and good salt resistance ability. Raman spectroscopy confirmed the presence of structural defects within the carbon dots, which are associated with the presence of hybrid groups on their surface. Fourier-transform infrared analysis detected various carbon-bonded, nitrogen-bonded, and oxygen-bonded units. The quantum yield was around 8.9%. These findings from our experiments indicate that the manufactured carbon dots possess substantial promise for a wide range of applications within the biotechnology field.

Facile Synthesis of Multifunctional Carbon Dots Derived from Camel Milk for Mn7+ Sensing and Antiamyloid and Anticancer Activities

Carbon dots (CDs) are promising biocompatible fluorescent nanoparticles mainly used in bioimaging, drug delivery, sensing, therapeutics, and various other applications. The utilization of natural sources and green synthetic approaches is resulting in highly biocompatible and nontoxic nanoparticles. Herein, we report an unprecedented facile and green synthesis of highly luminescent carbon dots derived from camel milk (CM) for sensing manganese (Mn7+) ions and for identifying the anticancer potential and antiamyloid activity against α-synuclein amyloids. α-Synuclein amyloid formation due to protein misfolding (genetic and environmental factors) has gained significant attention due to its association with Parkinson's disease and other synucleinopathies. The as-synthesized CM-CDs possess an average hydrodynamic diameter ranging from 3 to 15 nm and also exhibit strong photoluminescence (PL) emission in the blue region. The CM-CDs possess good water dispersibility, stable fluorescence under different physical states, and outstanding photostability. Moreover, the CM-CDs are validated as an efficient sensor for the detection of Mn7+ ions in DI water and in metal ion-polluted tap water. In addition, the CM-CDs have demonstrated a very good quantum yield (QY) of 24.6% and a limit of detection (LOD) of 0.58 μM for Mn7+ ions with no incubation time. Consequently, the exceptional properties of CM-CDs make them highly suitable for a diverse array of biomedical applications.

Effect of Doping Heteroatoms on the Optical Behaviors and Radical Scavenging Properties of Carbon Nanodots

Heteroatom doping is regarded as a promising method for controlling the optoelectronic properties of carbon nanodots (CNDs), notably their fluorescence and antioxidation activities. In this study, phosphorous (P) and boron (B) are doped at different quantities in the CNDs' structures to investigate their effects on the optical and antioxidation properties. Both the dopants can enhance light absorption and fluorescence, yet via different approaches. After doping, the UV-vis absorption of high P%-CNDs demonstrated a slight blue shift (348-345 nm), while the high B%-CNDs showed a minor red shift (348-351 nm), respectively. The fluorescence emission wavelength of doped CNDs changes marginally while the intensity increases significantly. Structural and composition characterizations show elevated levels of C=O on the surface of high P%-CND compared to low P%-CNDs. In B-doped CNDs, more NO₃ ^- functional groups and O-C=O bonds and fewer C-C bonds form at the surface of high B%-CNDs compared to the low B%-CNDs. A radical scavenging study using 2,2-diphenyl-1-picrylhydrazyl (DPPH) was carried out for all CNDs. It was found that the high B%-CNDs exhibited the highest scavenging capacity. The effects of the atomic properties of dopants and the resulting structures of CNDs, including atomic radius, electronegativity, and bond lengths with carbon, on the optoelectronic property and antioxidative reactions of CNDs are comprehensively discussed. It suggests that the effect of P-doping has a major impact on the carbogenic core structure of the CNDs, while the B-doping mainly impacts the surface functionalities.

Insight into the Modulation of Carbon-Dot Optical Sensing Attributes through a Reduction Pathway

Oxidized/reduced carbon dots (CDs) with tunable optical features have emerged as a new class of CDs having a common "molecular origin" but different fluorescence (FL) behaviors. In the present work, using "banana peel" as a sole carbon source followed by doping with fluorine (F), boron (B), and nitrogen (N) over CDs, banana peel-derived carbon dots (BP-CDs) were synthesized using a well-known hydrothermal synthesis method. Moreover, as-synthesized BP-CDs were further reduced to "rBP-CDs" by NaBH4. At post reduction, the FL performance (i.e., quantum yield) of rBP-CDs were found to be enhanced compared with the BP-CDs, along with variations in excitation and emission wavelengths. Interestingly, the optical sensing attributes of BP-CDs and rBP-CDs were varied, that is, BP-CDs selectively sense "Co2+ with a limit of detection (LOD) value of 180 nM", whereas rBP-CDs detected Co2+ (with an LOD value of 242 nM) as well as Hg2+ (with an LOD value of 190 nM). To the best of our knowledge, this work presents the very first report on the modulation of CDs' sensing behavior after reduction. The modulation in the sensing behavior with the common carbon precursor and reduction paves a new possibility for exploring CDs for different commercial applications.

Carbon dots with polarity-tunable characteristics for the selective detection of sodium copper chlorophyllin and copper ions

Compared to water-soluble carbon dots (CDs) the properties and applications of hydrophobic CDs are rarely addressed. In this study, a one-pot, simple chemical oxidation approach has been applied to synthesize hydrophobic carbon dots (TO-CDs) at room temperature from triolein (TO) in concentrated sulfuric acid solution. Sodium copper chlorophyllin (SCC) quenches the fluorescence of TO-CDs by a photoinduced electron transfer process. Upon excitation at 400 nm, the fluorescence intensity of TO-CDs probe at 500 nm shows a linear response against the SCC concentration ranging from 1.0 to 10 μM, with a limit of detection (LOD) of 0.61 μM. Quantitation of SCC in flavored drinks shows percentage recovery (%R) vaues of 98-103% and relative standard deviation (RSD) values less than 6.5%. The hydrophobic TO-CDs can be converted into hydrophilic TO-CDs through hydrolysis in NaOH solution. The presence of sulfonyl groups on the hydrophilic TO-CDs enhances the coordination ability of the CDs toward Cu²⁺ ions, leading to fluorescence quenching which allows for the detection of Cu²⁺ ions with LOD of 0.21 μM and a linear range of 0.5-10 μM. The hydrophilic TO-CD probe possesses high selectivity toward Cu²⁺ ions (tolerance at least ten-fold comparative to other metal ions). The assay has been validated with the analysis of spiked soil samples, with %R values of Cu concentration of 97.8-99.0% and RSDs below 2.0%. The surface tunable CD probes demonstrate their potential for the rapid screening of Cu²⁺ ions in environmental samples and SCC in foods.

Near-Infrared Light-Triggered Lysosome-Targetable Carbon Dots for Photothermal Therapy of Cancer

Photothermal therapy (PTT) has inherent advantages in the treatment of hypoxic tumors due to its optically controlled selectivity on tumor ablation and oxygen-independent nature. The subcellular organelle-targeting capability and photothermal conversion efficiency (PCE) at near-infrared (NIR) wavelength are the key parameters in the assessment of the photothermal agent (PTA). Here, we report that carbon dots (CDs) prepared by the hydrothermal treatment of coronene derivatives show a high PCE of 54.7% at 808 nm, which can be attributed to the narrow band gap and the presence of amounts of continuous energy bands on CDs. Moreover, the vibrations in the layered graphite structures of the CDs also increase the rate of nonradiative transition and thus enhance the PCE. Furthermore, the CDs also possess excellent photostability, biocompatibility, and cell penetration capability and could mainly accumulate in the lysosomes. These experiment results have proved that the CDs are suitable as an efficient NIR light-triggered PTA for efficient PTT against cancer.

Carbon Dots: Classification, Properties, Synthesis, Characterization, and Applications in Health Care-An Updated Review (2018-2021)

Carbon dots (CDs) are usually smaller than 10 nm in size, and are meticulously formulated and recently introduced nanomaterials, among the other types of carbon-based nanomaterials. They have gained significant attention and an incredible interest in the field of nanotechnology and biomedical science, which is merely due to their considerable and exclusive attributes; including their enhanced electron transferability, photobleaching and photo-blinking effects, high photoluminescent quantum yield, fluorescence property, resistance to photo-decomposition, increased electrocatalytic activity, good aqueous solubility, excellent biocompatibility, long-term chemical stability, cost-effectiveness, negligible toxicity, and acquaintance of large effective surface area-to-volume ratio. CDs can be readily functionalized owing to the abundant functional groups on their surfaces, and they also exhibit remarkable sensing features such as specific, selective, and multiplex detectability. In addition, the physico-chemical characteristics of CDs can be easily tunable based on their intended usage or application. In this comprehensive review article, we mainly discuss the classification of CDs, their ideal properties, their general synthesis approaches, and primary characterization techniques. More importantly, we update the readers about the recent trends of CDs in health care applications (viz., their substantial and prominent role in the area of electrochemical and optical biosensing, bioimaging, drug/gene delivery, as well as in photodynamic/photothermal therapy).

Coffee Grounds-Derived CNPs for Efficient Cr(VI) Water Remediation

Carbon nanomaterials are a group of materials characterized by sp2/sp3 carbon backbone which, combined with surface atoms and/or chemical groups, ensures peculiar physical chemical features for a wide range of applications. Among these materials, carbon dots and carbon nanoparticles belong to carbon nanomaterials with a few nanometer dimensions. In this work, carbon nanoparticles were produced from spent coffee grounds as sustainable carbon source through a simple, cheap and eco-friendly procedure according to an oxidation process (at controlled temperature) driven by hydrogen peroxide. Atomic Force Microscope (AFM) and fluorescence, UV-Vis absorption, FT-IR and Raman spectroscopy were used to assess the formation of carbon nanomaterials of about 10 nm with the typical emission and absorption properties of carbon dots and peculiar surface features. In fact, the presence of heteroatoms, i.e., phosphorus, and the carbonyl/carboxyl surface groups on carbon nanoparticles, was proposed to confer peculiar properties allowing the fast Mn(VII) reduction to Mn(II) at neutral pH and the Cr(VI) reduction to Cr(III) in weak acid aqueous media.

Efficient White Electrochemiluminescent Emission From Carbon Quantum Dot Films

Carbon quantum dots (CQDs) were manufactured from citric acid and urea in a gram-scale synthesis with a controlled size range between 1. 5 and 23.8 nm. The size control was realized by varying volume of the precursor solution in a hydrothermal synthesis method. The prepared CQDs were investigated using electrochemiluminescence (ECL) spectroscopy at interfaces of their electrode films and electrolyte solution containing coreactants rather than conventional optoelectronic tests, providing an in-depth analysis of light-emission mechanisms of the so-called half-cells. ECL from the CQD films with TPrA and K2S2O8 as coreactants provided information on the stability of the CQD radicals in the films. It was discovered that CQD•- has a powerful electron donating nature to sulfate radical to generate ECL at a relative efficiency of 96% to the Ru(bpy)3Cl2/K2S2O8 coreactant system, indicating a strong performance in light emitting applications. The smaller the CQD particle sizes, the higher the ECL efficiency of the film interface, most likely due to the increased presence of surface states per mass of CQDs. Spooling ECL spectroscopy of the system revealed a potential-dependent light emission starting from a deep red color to blue-shifted intensity maximum, cool bright white emission with a correlated color temperature of 3,200 K. This color temperature is appropriate for most indoor lighting applications. The above ECL results provide information on the performance of CQD light emitters in films, permitting preliminary screening for light emitting candidates in optoelectronic applications. This screening has revealed CQD films as a powerful and cost-effective light emitting layer toward lighting devices for indoor applications.

Inactivation of HIV-1 Infection through Integrative Blocking with Amino Phenylboronic Acid Attributed Carbon Dots

Current antiretroviral HIV therapies continue to have problems related to procedural complications, toxicity, and uncontrolled side effects. In this study, amino phenylboronic acid-modified carbon dots (APBA-CDs) were introduced as a new nanoparticle-based on gp120 targeting that inhibits HIV-1 entry processes. Prolonged by simple pyrolysis for preparing carbon dots, this report further explores attributing amino phenylboronic acid on carbon dots, which prove the formation of graphene-like structures on carbon dots and boronic acid sites, thereby enabling the enhancement of positive optical properties through photoluminescent detection. Aside from performing well in terms of biocompatibility and low cytotoxicity (the CC₅₀ reach up to 11.2 mg/mL), APBA-CDs exhibited superior capabilities in terms of prohibiting HIV-1 entry onto targeted MOLT-4 cells recognized by the delimitations of syncitia formation and higher ATP signal rather than bare carbon dots. The modified carbon dots also promote dual-action on HIV-1 treatment by both intracellularly and extracellularly viral blocking by combining with the Duviral drug, along with compressing p24 antigen signals that are better than APBA-CDs and Duviral itself.

Sulfur-doped graphene quantum dot-based paper sensor for highly sensitive and selective detection of 4-nitrophenol in contaminated water and wastewater

4-Nitrophenol (4-NP) is a promulgated priority pollutant, which can cause a negative impact on human health. The development of a direct and effective technique for the rapid detection and screening of 4-NP is, therefore, of urgent need. In this study, the blue luminescent sulfur-doped graphene quantum dots (S-GQDs) with a size of 1–5 nm are fabricated using a one-step pyrolysis procedure in the presence of citric acid and 3-mercaptosuccinic acid. The S-GQDs exhibit a strong emission band at 450 nm under the excitation of 330 nm UV light. 4-NP can serve as the fluorescence quencher by the π–π interaction with S-GQD, resulting in the linear decrease in fluorescence intensity after the addition of various 4-NP concentrations ranging from 10 nM to 200 μM. The S-GQDs serve as the sensing probe to enhance the analytical performance on 4-NP detection with the limit of detection values of 0.7 and 3.5 nM in deionized water and wastewater, respectively. The S-GQD based sensing platform can be used to detect 4-NP in different matrices of water and wastewater. In addition, the detected percentages of spiked 4-NP concentrations in the presence of different matrices and interferences are in the range of (98 ± 5)–(108 ± 2)%. Moreover, the S-GQD based paper sensor can rapidly screen 4-NP in wastewater within 1 min. Results obtained in this study clearly demonstrate the superiority of S-GQDs as a promising fluorescence probe for highly sensitive and selective detection of a wide concentration range of 4-NP in deionized water and wastewater.

Sulfur-doped graphene quantum dots have been prepared for effective and rapid detection of 4-nitrophenol.

Molecular imaging with nanoparticles: the dwarf actors revisited 10 years later

We explore present-day trends and challenges in nanomedicine. Creativity in the laboratories continues: the published literature on novel nanoparticles is now vast. Nanoagents are discussed here which are composed entirely of strongly photoluminescent materials, tunable to desired optical properties and of inherently low toxicity. We focus on "quantum nanoparticles" prepared from allotropes of carbon. The principles behind strong, tunable photoluminescence are quantum mechanical: we present them in simple outline. The major industries racing to develop these materials can offer significant technical guidance to nanomedicine, which could help to custom-design strongly signalling nanoagents specifically for stated clinical applications. Since such agents are small, they can be targeted easily, making active targeting possible. We consider it timely now to study the interactions nanoparticles undergo with tissue components in living animals and to learn to understand and overcome the numerous barriers the organism interposes between the blood and targets in or on parenchymal cells. As the near infra-red spectrum opens up, detection of glowing nanoparticles several centimeters deep in a living human subject becomes calculable and we present a simple way to do this. Finally, we discuss the slow-fuse and resource-inefficient entry of nanoparticles into clinical application. A first possible reason is failure to target across the body's barriers, see above. Second, in the sparse translational landscape funding and support gaps yawn widely between academic research and subsequent development. We consider the agendas of the numerous "stakeholders" participating in this sad landscape and point to some faint glimmers of hope for the future.