Tribolium castaneum RR-1 cuticular protein TcCPR4 is required for formation of pore canals in rigid cuticle

Characterization of an RR-2 cuticle protein DcCP8 and its potential application based on SPc nanoparticle-wrapped dsRNA in Diaphorina citri

BACKGROUND

The insect cuticle consists of chitin fibers and a protein matrix, which plays an important role in protecting the body from invasion of various pathogens and prevents water loss. Periodic synthesis and degradation of the cuticle is required for the growth and development of insects. Key genes involved in cuticle formation have long been considered a potential target for pest control.

RESULTS

In this study, a member of the RR-2 subfamily of cuticular protein 8 (DcCP8) was identified from the Diaphorina citri genome database. Immunofluorescence analysis suggested that DcCP8 was mainly located in the Diaphorina citri exocuticle and can be induced to up-regulate 12 h following 20-hydroxyecdysone (20E) treatment. Silencing of DcCP8 by RNA interference (RNAi) significantly disrupted the metamorphosis to the adult stage, and improved the permeability of the cuticle. Transmission electron microscopy (TEM) analysis revealed that the synthesis of the exocuticle was impressed after silencing of DcCP8. Furthermore, the recombinant DcCP8 protein exhibited chitin-binding properties in vitro, down-regulation of DcCP8 significantly inhibited expression levels of chitin metabolism-related genes. Additionally, a sprayable RNAi method targeting DcCP8 based on star polycation (SPc) nanoparticles-wrapped double-stranded RNA (dsRNA) significantly increased Diaphorina citri mortality. Transcriptome sequencing further confirmed that genes associated with the endocytic pathway and immune response were up-regulated in Diaphorina citri after SPc treatment.

CONCLUSIONS

The current study indicated that DcCP8 is critical for the formation of Diaphorina citri exocuticles, and lays a foundation for Diaphorina citri control based on large-scale dsRNA nanoparticles. © 2024 Society of Chemical Industry.

Silencing NlFAR7 destroyed the pore canals and related structures of the brown planthopper

Fatty acyl-CoA reductase (FAR) is one of the key enzymes, which catalyses the conversion of fatty acyl-CoA to the corresponding alcohols. Among the FAR family members in the brown planthopper (Nilaparvata lugens), NlFAR7 plays a pivotal role in both the synthesis of cuticular hydrocarbons and the waterproofing of the cuticle. However, the precise mechanism by which NlFAR7 influences the formation of the cuticle structure in N. lugens remains unclear. Therefore, this paper aims to investigate the impact of NlFAR7 through RNA interference, transmission electron microscope, focused ion beam scanning electron microscopy (FIB-SEM) and lipidomics analysis. FIB-SEM is employed to reconstruct the three-dimensional (3D) architecture of the pore canals and related cuticle structures in N. lugens subjected to dsNlFAR7 and dsGFP treatments, enabling a comprehensive assessment of changes in the cuticle structures. The results reveal a reduction in the thickness of the cuticle and disruptions in the spiral structure of pore canals, accompanied by widened base and middle diameters. Furthermore, the lipidomics comparison analysis between dsNlFAR7- and dsGFP-treated N. lugens demonstrated that there were 25 metabolites involved in cuticular lipid layer synthesis, including 7 triacylglycerols (TGs), 5 phosphatidylcholines (PCs), 3 phosphatidylethanolamines (PEs) and 2 diacylglycerols (DGs) decreased, and 4 triacylglycerols (TGs) and 4 PEs increased. In conclusion, silencing NlFAR7 disrupts the synthesis of overall lipids and destroys the cuticular pore canals and related structures, thereby disrupting the secretion of cuticular lipids, thus affecting the cuticular waterproofing of N. lugens. These findings give significant attention with reference to further biochemical researches on the substrate specificity of FAR protein, and the molecular regulation mechanisms during N. lugens life cycle.

Spatio-temporal distribution and genetic background of elastic proteins inside the chitin/chitosan matrix of insects including their functional significance for locomotion

In insects, cuticle proteins interact with chitin and chitosan of the exoskeleton forming crystalline, amorphic or composite material structures. The biochemical and mechanical composition of the structure defines the cuticle's physical properties and thus how the insect cuticle behaves under mechanical stress. The tissue-specific ratio between chitin and chitosan and its pattern of deacetylation are recognized and interpreted by cuticle proteins depending on their local position in the body. Despite previous research, the assembly of the cuticle composites in time and space including its functional impact is widely unexplored. This review is devoted to the genetics underlying the temporal and spatial distribution of elastic proteins and the potential function of elastic proteins in insects with a focus on Resilin in the fruit fly Drosophila. The potential impact and function of localized patches of elastic proteins is discussed for movements in leg joints, locomotion and damage resistance of the cuticle. We conclude that an interdisciplinary research approach serves as an integral example for the molecular mechanisms of generation and interpretation of the chitin/chitosan matrix, not only in Drosophila but also in other arthropod species, and might help to synthesize artificial material composites.

The BTB-ZF gene Bm-mamo regulates pigmentation in silkworm caterpillars

The color pattern of insects is one of the most diverse adaptive evolutionary phenotypes. However, the molecular regulation of this color pattern is not fully understood. In this study, we found that the transcription factor Bm-mamo is responsible for black dilute (bd) allele mutations in the silkworm. Bm-mamo belongs to the BTB zinc finger family and is orthologous to mamo in Drosophila melanogaster. This gene has a conserved function in gamete production in Drosophila and silkworms and has evolved a pleiotropic function in the regulation of color patterns in caterpillars. Using RNAi and clustered regularly interspaced short palindromic repeats (CRISPR) technology, we showed that Bm-mamo is a repressor of dark melanin patterns in the larval epidermis. Using in vitro binding assays and gene expression profiling in wild-type and mutant larvae, we also showed that Bm-mamo likely regulates the expression of related pigment synthesis and cuticular protein genes in a coordinated manner to mediate its role in color pattern formation. This mechanism is consistent with the dual role of this transcription factor in regulating both the structure and shape of the cuticle and the pigments that are embedded within it. This study provides new insight into the regulation of color patterns as well as into the construction of more complex epidermal features in some insects.

miR-2765 Modulates the Seasonal Polyphenism in Cacopsylla chinensis by Targeting a Novel Cold Rreceptor CcTRPC3

Polyphenism is a beneficial way in organisms to better cope with changing circumstances and is a hot topic in entomology, evolutionary biology, and ecology. Until now, this phenomenon has been proven to be season-, density-, and diet-dependent; however, there are very few reports on temperature regulation. Cacopsylla chinensis showed seasonal polyphenism, namely as summer- and winter-form, with obvious diversity in phenotypic characteristics in response to seasonal variation. Previous studies have found that low temperature in autumn is an extremely important element in inducing summer-form change to winter-form, but the underlying regulatory mechanism is still a mystery. Herein, we provided the initial evidence that the third instar of the summer-form is the critical period for developing to the winter-form, and 10 °C induces this transition by affecting the total pigment, chitin level, and thickness of the cuticle. Second, CcTPRC3 was proven to function as a novel cold receptor to control this seasonal polyphenism. Moreover, miR-2765 was found to mediate seasonal polyphenism by inhibiting CcTRPC3 expression. Last, we found that cuticle binding proteins CcCPR4 and CcCPR9 function as the downstream signals of CcTRPC3 to regulate the seasonal polyphenism in C. chinensis. In conclusion, our results displayed a novel signal pathway of miR-2765 and CcTRPC3 for the regulation of seasonal polyphenism in C. chinensis. These findings provide insights into the comprehensive analysis of insect polyphenism and are useful in developing potential strategies to block the phase transition for the pest control of C. chinensis.

Expressions and functions of RR-1 cuticular protein genes in the integument of Mythimna separata

As the most outer layer between itself and the environment, integuments are necessary for insects with various important functions. Cuticular proteins (CPs) are the main components in integuments, while the functions of CP genes remain unknown in Mythimna separata (Walker), which is a devastating agricultural pest. In this study, 79 CP genes were identified from the transcriptomes of larval integuments, 57 of which were from the family containing conserved Rebers & Riddiford (R&R) consensus (CPR family). Amongst these CPRs, 44 genes belonged to the subfamily with RR-1 motif (RR-1 genes) and clustered into three clades, with the top 15 most abundant RR-1 genes identified based on fragments per kilobase per million mapped fragments (FPKM) values. RT-qPCR analysis showed that most of RR-1 genes such as MsCPR1-4 were highly expressed at larval stages and in their integuments. The expression levels of RR-1 genes were generally decreased at the beginning but increased at the late stage of molting process. RNAi was applied for six RR-1 genes, and MsCPR1-4 were knocked down significantly. Silence of MsCPR2 resulted in abnormal integument formed after molting, while knockdown of MsCPR3 and MsCPR4 led to failure of molting, respectively. No phenotype was obtained for the RNAi of MsCPR1. Therefore, the expression of RR-1 genes and their functions were analyzed in the development of integuments in M. separata, providing new insights of RR-1 genes and potential targets for the development of growth regulators and new insecticides for M. separata.

Global Gene Expression Analysis Reveals Complex Cuticle Organization of the Tribolium Compound Eye

The red flour beetle Tribolium castaneum is a resource-rich model for genomic and developmental studies. To extend previous studies on Tribolium eye development, we produced transcriptomes for normal-eyed and eye-depleted heads of pupae and adults to identify differentially transcript-enriched (DE) genes in the visual system. Unexpectedly, cuticle-related genes were the largest functional class in the pupal compound eye DE gene population, indicating differential enrichment in three distinct cuticle components: clear lens facet cuticle, highly melanized cuticle of the ocular diaphragm, which surrounds the Tribolium compound eye for internal fortification, and newly identified facet margins of the tanned cuticle, possibly enhancing external fortification. Phylogenetic, linkage, and high-throughput gene knockdown data suggest that most cuticle proteins (CPs) expressed in the Tribolium compound eye stem from the deployment of ancient CP genes. Consistent with this, TcasCPR15, which we identified as the major lens CP gene in Tribolium, is a beetle-specific but pleiotropic paralog of the ancient CPR RR-2 CP gene family. The less abundant yet most likely even more lens-specific TcasCP63 is a member of a sprawling family of noncanonical CP genes, documenting a role of local gene family expansions in the emergence of the Tribolium compound eye CP repertoire. Comparisons with Drosophila and the mosquito Anopheles gambiae reveal a steady turnover of lens-enriched CP genes during insect evolution.

Mutation of a lepidopteran-specific PMP-like protein, BmLSPMP-like, induces a stick body shape in silkworm, Bombyx mori

BACKGROUND

Lepidoptera is one of the largest orders of insects, some of which are major pests of crops and forests. The cuticles of lepidopteran pests play important roles in defense against insecticides and pathogens, and are indispensable for constructing and maintaining extracellular structures and locomotion during their life cycle. Lepidopteran-specific cuticular proteins could be potential targets for lepidopteran pest control. But information on this is limited. Our research aimed to screen the lepidopteran-specific cuticular proteins using the lepidopteran model, the silkworm, to explore the molecular mechanism underlying the involvement of cuticular proteins in body shape construction.

RESULTS

Positional cloning showed that BmLSPMP-like, a gene encoding a lepidopteran-specific peritrophic matrix protein (PMP) like protein which includes a peritrophin A-type chitin-binding domain (CBM_14), is responsible for the stick (sk) mutation. BmLSPMP-like is an evolutionarily conserved gene that exhibits synteny in Lepidoptera and underwent purifying selection during evolution. Expression profiles demonstrated that BmLSPMP-like is expressed in chitin-forming tissues, testis and ovary, and accumulates in the cuticle. BmLSPMP-like knockout, generated with CRISPR/Cas9, resulted in a stick-like larval body shape phenotype. Over-expression of BmLSPMP-like in the sk mutant rescued its abnormal body shape. The results showed that BmLSPMP-like may be involved in assemblage in the larval cuticle.

CONCLUSION

Our results suggested that the dysfunction of BmLSPMP-like may result in a stick body shape phenotype in silkworm, through the regulation of the arrangement of the chitinous laminae and cuticle thickness. Our study provides new evidence of the effects of LSPMP-likes on lepidopteran body shape formation, metamorphosis and mortality, which could be an eco-friendly target for lepidopteran pest management. © 2022 Society of Chemical Industry.

RR-1 cuticular protein TcCPR69 is required for growth and metamorphosis in Tribolium castaneum

Cuticle is not only critical for protecting insects from noxious stimuli but is also involved in a variety of metabolic activities. Cuticular proteins (CPs) affect cuticle structure and mechanical properties during insect growth, reproduction, and environmental adaptation. Here, we describe the identification and characterization of a member of the RR-1 subfamily of CPs with an R&R consensus (CPR) in Tribolium castaneum (TcCPR69). Although it was previously reported to be highly expressed in the wings, we found that knocking down TcCPR69 by RNA interference (RNAi) did not cause obvious wing abnormalities but markedly disrupted the growth and metamorphosis of beetles with 100% cumulative mortality; additionally, the chitin content of the pharate adult was decreased and the new abdominal cuticle was significantly thinner before molting. TcCPR69 showed chitin-binding ability and the expression levels of key genes involved in chitin metabolism (trehalase [TcTRE], chitin synthase [TcCHSA and TcCHSB], and chitinase [TcCHT5 and TcCHT10]) were also decreased by TcCPR69 knockdown. TcCPR69 gene expression peaked shortly after molting and was increased 2.61 fold at 12 h after 20-hydroxyecdysone (20E) injection. This was reversed by RNAi of the ecdysone-related genes ecdysone receptor (TcECR) and fushi tarazu transcription factor 1 (TcFTZ-F1). These results indicate that TcCPR69 is positively regulated by 20E signaling to contribute to cuticle formation and maintain chitin accumulation during the growth and metamorphosis of beetles.

Nuclear receptor HR3 mediates transcriptional regulation of chitin metabolic genes during molting in Tribolium castaneum

BACKGROUND

Chitin, a major component of insect cuticles, plays a critical role in insect molting and morphogenesis. Thus, coordination of chitin remodeling during insect development requires tight transcriptional control of the chitin metabolism genes involved in chitin synthesis, assembly and degradation. However, the molecular mechanism underlying transcriptional coordination of chitin metabolism genes during beetle development is not yet completely understood.

RESULTS

We cloned the full-length cDNA encoding hormone receptor 3 (TcHR3) from Tribolium castaneum and showed a critical role of TcHR3 in modulating chitin metabolism gene expression during molting. Genome-wide transcriptome analysis of HR3-deficient old larvae using RNA sequencing analysis revealed a positive correlation between TcHR3 and transcription of chitin metabolism genes involved in chitin synthesis and degradation. In addition, HR3 overexpression significantly induced the gene promoter activity of N-acetylglucosaminidase 1 (NAG1) involved in chitin degradation and UDP-N-acetylglucosamine pyrophosphorylase 1 (UAP1) involved in chitin synthesis. Chromatin immunoprecipitation analysis revealed that HR3 could directly bind to HR3-response element of NAG1 and UAP1 promoters. Finally, HR3-deficient late instar larvae and prepupae exhibited defects in larval-larval and larval-pupal molting, respectively, leading to eventual larval death because developing larvae were trapped inside the old cuticle as a result of abnormal chitin metabolism.

CONCLUSION

TcHR3 is a transcriptional regulator of chitin metabolic genes for molting of T. castaneum. Controlling the molting system by TcHR3 might be a new management strategy for selective control of red flour beetle infestation. © 2022 Society of Chemical Industry.

Ultrastructural analysis of beetle larva cuticles during infection with the entomopathogenic fungus, Beauveria bassiana

BACKGROUND

Beauveria bassiana is one of the commercially available entomopathogenic fungi (EPF), and a number of isolates with high virulence and broad host spectrum have been used to control agricultural and forest pests. Although the functional importance of genes in EPFs' pathogenesis have been extensively studied, the precise ultrastructural mechanism of the fungal infection, particularly penetration of the host insect cuticles, is not well understood.

RESULTS

In this study, we investigated the morphology and ultrastructure of the larval cuticle of the red flour beetle, Tribolium castaneum, after treatment with B. bassiana ERL1170 expressing an enhanced green fluorescent protein (Bb-eGFP). The Bb-eGFP showed high virulence against the larvae, with approximately 90% mortality at 48 h after treatment (HAT) and 100% at 72 HAT under our infection conditions. In these larvae, the regions of the body wall with flexible cuticles, such as the ventral and ventrolateral thorax and abdomen, became darkly melanized, but there was little to no melanization in the rigid dorsal cuticular structures. Confocal microscopy and transmission electron microscopy (TEM) indicated that germinated conidia on the surface of the larval cuticle were evident at 6 HAT, which formed penetration pegs and began to penetrate the several cuticle layers/laminae by 12 HAT. The penetration pegs then developed invading hyphae, some of which passed through the cuticle and reached the epidermal cells by 24 HAT. The larval cuticle was aggressively and extensively disrupted by 48 HAT, and a number of outgrowing hyphae were observed at 72 HAT.

CONCLUSIONS

Our results indicate that Bb-eGFP is capable of infection and penetrating T. castaneum larvae shortly after inoculation (~24 HAT) at the body regions with apparently flexible and membranous cuticles, such as the ventral intersegmental regions and the ventrolateral pleura. This study provides details on the histopathogenesis of the host cuticle by infection and penetration of EPFs, which can facilitate the management of insect pests. © 2022 Society of Chemical Industry.

SERCA interacts with chitin synthase and participates in cuticular chitin biogenesis in Drosophila

The biogenesis of chitin, a major structural polysaccharide found in the cuticle and peritrophic matrix, is crucial for insect growth and development. Chitin synthase, a membrane-integral β-glycosyltransferase, has been identified as the core of the chitin biogenesis machinery. However, a yet unknown number of auxiliary proteins appear to assist in chitin biosynthesis, whose precise function remains elusive. Here, we identified a sarco/endoplasmic reticulum Ca²⁺-ATPase (SERCA), in the fruit fly Drosophila melanogaster, as a chitin biogenesis-associated protein. The physical interaction between DmSERCA and epidermal chitin synthase (Krotzkopf verkehrt, Kkv) was demonstrated and analyzed using split-ubiquitin membrane yeast two-hybrid, bimolecular fluorescent complementation, pull-down, and immunoprecipitation assays. The interaction involves N-terminal regions (aa 48-81 and aa 247-33) and C-terminal regions (aa 743-783 and aa 824-859) of DmSERCA and two N-terminal regions (aa 121-179 and aa 369-539) of Kkv, all of which are predicted be transmembrane helices. While tissue-specific knock-down of DmSERCA in the epidermis caused larval and pupal lethality, the knock-down of DmSERCA in wings resulted in smaller and crinkled wings, a significant decrease in chitin deposition, and the loss of chitin lamellar structure. Although DmSERCA is well-known for its role in muscular contraction, this study reveals a novel role in chitin synthesis, contributing to our knowledge on the machinery of chitin biogenesis.

The DOMON domain protein LmKnk contributes to correct chitin content, pore canal formation and lipid deposition in the cuticle of Locusta migratoria during moulting

Insects prevent uncontrolled penetration of water and xenobiotics by producing an impermeable cuticle. The major component of the cuticle is chitin that adopts a crystalline structure thereby contributing to cuticle stability. Our understanding of the contribution of chitin to the cuticle barrier function is limited. Here, we studied the role of the DOMON domain protein Knickkopf (LmKnk) that is involved in chitin organization and cuticle permeability in the migratory locust Locusta migratoria. We show that LmKnk localizes to the chitin layer in the newly produced cuticle. Injection of double-stranded RNA targeting LmKnk (dsLmKnk) in locust nymphs caused failure of moulting to the next stage. Histological experiments revealed that apolysis, i.e., the detachment of the old cuticle from the body surface, was normal; however, the newly synthesized cuticle was thinner than the cuticle of the control insects. Indeed, chitin content dropped after suppression of LmKnk expression. As seen by transmission electron microscopy, crystalline chitin organization was lost in dsLmKnk-treated insects. In addition, the structure of pore canals, which are lipid transporting routes in the cuticle, was abnormal. Consistently, their content was reduced and, probably by consequence, lipid deposition on the cuticle was decreased after injection of dsLmKnk. Suppression of LmKnk transcript levels rendered L. migratoria more susceptible to each of four selected insecticides including malathion, chlorpyrifos, carbaryl and deltamethrin. Overall, our data show that LmKnk is needed for correct chitin amounts and organization, and their changes ultimately affect cuticular permeability in L. migratoria.

Unveiling characteristic proteins for the structural development of beetle elytra

Beetles possess a set of highly modified and tanned forewings, elytra, which are lightweight yet rigid and tough. Immediately after eclosion, the elytra are initially thin, pale and soft. However, they rapidly expand and subsequently become hardened and often dark, resulting from both pigmentation and sclerotization. Here, we identified changes in protein composition during the developmental processes of the elytra in the Japanese rhinoceros beetle, Trypoxylus dichotomus. Using mass spectrometry, a total of 414 proteins were identified from both untanned and tanned elytra, including 31 cuticular proteins (CPs), which constitute one of the major components of insect cuticles. Moreover, CPs containing Rebers and Riddiford motifs (CPR), the most abundant CP family, were separated into two groups based on their expression and amino acid sequences, such as a Gly-rich sequence region and Ala-Ala-Pro repeats. These protein groups may play crucial roles in elytra formation at different time points, likely including self-assembly of chitin nanofibers that control elytral macro and microstructures and dictate changes in other properties (i.e., mechanical property). Clarification of the protein functions will enhance the understanding of elytra formation and potentially benefit the development of lightweight materials for industrial and biomedical applications. STATEMENT OF SIGNIFICANCE: The beetle elytron is a light-weight natural bio-composite which displays high stiffness and toughness. This structure is composed of chitin fibrils and proteins, some of which are responsible for architectural development and hardening. This work, which involves insights from molecular biology and materials science, investigated changes in proteomic, architectural, and localized mechanical characteristics of elytra from the Japanese rhinoceros beetle to understand molecular mechanisms driving elytra development. In the present study, we identified a set of new protein groups which are likely related to the structural development of elytra and has potential for new pathways for processing green materials.

CPR63 promotes pyrethroid resistance by increasing cuticle thickness in Culex pipiens pallens

The cuticle protein (CP) encoded by CPR63 plays a role in deltamethrin resistance in Culex pipiens pallens. Herein, we investigated the distribution of CPR63 transcripts in this organism and observed high expression levels in legs and wings. Furthermore, expression of CPR63 in the legs of deltamethrin-resistant (DR) strains was 2.17-fold higher than in deltamethrin-susceptible (DS) strains. Cuticle analysis of small interfering RNA (siRNA) groups by scanning electron microscopy (SEM) revealed a significantly thinner cuticle of the tarsi in the siCPR63 group than in the siNC (negative control siRNA) group. Transmission electron microscopy (TEM) revealed that the exocuticle and endocuticle thickness of the tarsi were significantly thinner, which contributes the thinner procuticle of tarsi in the siCPR63 group than in the siNC group. Our results suggested that CPR63 might contribute to the resistance phenotype by thickening the cuticle and thereby possibly increasing the tolerance of mosquitoes to deltamethrin.

Cuticular protein genes showing peaks at different stages are probably regulated by different ecdysone responsive transcription factors during larval-pupal transformation

We aimed to explain the reason and function of the successive expression of ecdysone-responsive transcription factors (ERTFs) and related cuticular protein (CP) genes during transformation from larva to pupa. The regulation of the expression of CP genes by ERTFs was examined by in vitro wing disc culture and reporter assay using a gene gun transduction system. Two CP genes that showed expression peaks at different stages-BmorCPG12 at W3L and BmorCPH2 at P0 stage-were selected and examined. Reporter constructs conveying putative BHR3, ßFTZ-F1, BHR39, and E74A binding sites of BmorCPG12 and BmorCPH2 showed promoter activity when introduced into wing discs. In the present study, we showed the functioning of the putative BHR3 and E74A binding sites, together with putative ßFTZ-F1 binding sites, on the activation of CP genes, and different ERTF binding sites functioned in one CP gene. From these, we conclude that BHR3, ßFTZ-F1, and E74A that are successively expressed bring about the successive expression of CP genes, resulting in insect metamorphosis. In addition to this, reporter constructs conveying putative BHR39 binding sites of BmorCPG12 and BmorCPH2 showed negative regulation.

Improving Polysaccharide-Based Chitin/Chitosan-Aerogel Materials by Learning from Genetics and Molecular Biology

Improved wound healing of burnt skin and skin lesions, as well as medical implants and replacement products, requires the support of synthetical matrices. Yet, producing synthetic biocompatible matrices that exhibit specialized flexibility, stability, and biodegradability is challenging. Synthetic chitin/chitosan matrices may provide the desired advantages for producing specialized grafts but must be modified to improve their properties. Synthetic chitin/chitosan hydrogel and aerogel techniques provide the advantages for improvement with a bioinspired view adapted from the natural molecular toolbox. To this end, animal genetics provide deep knowledge into which molecular key factors decisively influence the properties of natural chitin matrices. The genetically identified proteins and enzymes control chitin matrix assembly, architecture, and degradation. Combining synthetic chitin matrices with critical biological factors may point to the future direction with engineering materials of specific properties for biomedical applications such as burned skin or skin blistering and extensive lesions due to genetic diseases.

Antifungal roles of adult-specific cuticular protein genes of the red flour beetle, Tribolium castaneum

The insect cuticle is a composite structure that can further be divided into a few sub-structural layers. Its large moiety comprises a lattice of chitin fibrils and structural proteins, both of which are stabilized by covalent bonding among them. The cuticle covers the whole surface of insect body, and thus has long been suggested for the involvement in defense against entomopathogens, especially entomopathogenic fungi that infect percutaneously. We have been addressing this issue in the past few years and have so far demonstrated experimentally that chitin synthase 1, laccase2 as well as benzoquinone synthesis-related genes of Tribolium castaneum have indispensable roles in the antifungal host defense. In the present study we focused on another major component of the insect cuticular integument, structural cuticular proteins. We chose three genes coding for adult-specific cuticular proteins, namely CPR4, CPR18 and CPR27, and examined their roles in forming immunologically sound adult cuticular integuments. Analyses of developmental expression revealed that the three genes showed high level expression in the pupal stage. These results are consistent with their proposed roles in constructing cuticle of adult beetles. The RNA interference-mediated gene knockdown was employed to silence these genes, and the administration of double strand RNAs in pupae resulted in the adults with malformed elytra. The single knockdown of the three genes attenuated somewhat the defense of the resulting adult beetles against Beauveria bassiana and Metarhizium anisopliae, but statistical analyses indicated no significant differences from controls. In contrast, the double or triple knockdown mutant beetles displayed a drastic disruption of the host defense against the two entomopathogenic fungal species irrespective of the combination of targeted cuticular protein genes, demonstrating the important roles of the three cuticular protein genes in conferring robust antifungal properties on the adult cuticle. Scanning electron microscopic observation revealed that the germination of conidia attached on the adult body surface was still suppressed after the gene knockdown as in the case of wild-type beetles, suggesting that the weakened antifungal phenotypes resulted from the combined knockdown of the adult-specific cuticular protein genes could not be accounted for by the disfunction of secretion/retention of fungistatic benzoquinone derivatives.

RNAi-mediated silencing of the autophagy-related gene NlATG3 inhibits survival and fecundity of the brown planthopper, Nilaparvata lugens

BACKGROUND

The brown planthopper (BPH), Nilaparvata lugens, is a serious insect pest of rice. Autophagy and its related gene ATG3 play multiple roles in insects. However, information about the functions of ATG3 in BPH (NlATG3) is unavailable, and its potential as a target for pest control remains unclear.

RESULTS

RT-qPCR results showed a relatively low expression of NlATG3 in 1st-4th-instar nymphs, which increased through 9-day-old adults. The expression of NlATG3 increased continuously in 1-day-old through 5-day-old eggs, whereas it decreased thereafter. The mRNA level of NlATG3 was markedly higher in the ovary (1.16) and head (1.00) compared to the rest body parts of BPH adults. Injecting nymphs with dsNlATG3 at doses from 62.5 to 250 ng per insect had strong lethal effect upon them. For the 5th-instar nymphs, all individuals died within 5 days after receiving the dsNlATG3, and importantly, no individual successfully molted. Transmission electron microscopy revealed the new cuticle of nymphs injected with dsNlATG3 became loose and curved, which is clearly different from that of the control. Correspondingly, the obvious vesicles in epidermal cells disappeared after dsNlATG3-treatment. RNAi of NlATG3 significantly reduced the total number of eggs laid per female as well as the eggs' hatchability, especially in the dsNlATG3♀ × dsGFP♂ group, whose total number of eggs laid per female largely decreased by 80.4%, and whose eggs' hatchability was significantly reduced from 95.7% to zero, when compared with the control (dsGFP♀ × dsGFP♂).

CONCLUSION

NlATG3 is a promising target for developing RNAi-based insect management strategies. © 2021 Society of Chemical Industry.

Functional analysis of ABCG and ABCH transporters from the red flour beetle, Tribolium castaneum

BACKGROUND

ATP-binding cassette transporter (ABC transporter) subfamilies ABCA-C and ABCG-H have been implicated in insecticide detoxification, mostly based on findings of elevated gene expression in response to insecticide treatment. We previously characterized TcABCA-C genes from the model beetle and pest Tribolium castaneum and demonstrated that TcABCA and TcABCC genes are involved in the elimination of diflubenzuron, because RNA interference (RNAi)-mediated gene silencing increased susceptibility. In this study, we focused on the potential functions of TcABCG and TcABCH genes in insecticide detoxification.

RESULTS

When we silenced the expression of TcABCG-H genes using RNAi, we noticed a previously unreported developmental RNAi phenotype for TcABCG-4F, which is characterized by 50% mortality and ecdysial arrest during adult moult. When we knocked down the Drosophila brown orthologue TcABCG-XC, we did not obtain apparent eye colour phenotypes but did observe a loss of riboflavin uptake by Malpighian tubules. Next, we determined the expression profiles of all TcABCG-H genes in different tissues and developmental stages and analysed transcript levels in response to treatment with four chemically unrelated insecticides. We found that some genes were specifically upregulated after insecticide treatment. However, when we determined insecticide-induced mortalities in larvae that were treated by double-stranded RNA injection to silence those TcABCG-H genes that were upregulated, we did not observe a significant increase in susceptibility to insecticides.

CONCLUSION

Our findings suggest that the observed insecticide-dependent induction of TcABCG-H gene expression reflects an unspecific stress response, and hence underlines the significance of functional studies on insecticide detoxification. © 2021 The Authors. Pest Management Science published by John Wiley & Sons Ltd on behalf of Society of Chemical Industry.

A knockout screen of genes expressed specifically in Ae. aegypti pupae reveals a critical role for stretchin in mosquito flight

Aedes aegypti is a critical vector for transmitting Zika, dengue, chikungunya, and yellow fever viruses to humans. Genetic strategies to limit mosquito survival based upon sex distortion or disruption of development may be valuable new tools to control Ae. aegypti populations. We identified six genes with expression limited to pupal development; osi8 and osi11 (Osiris protein family), CPRs and CPF (cuticle protein family), and stretchin (a muscle protein). Heritable CRISPR/Cas9-mediated gene knockout of these genes did not reveal any defects in pupal development. However, stretchin-null mutations (strn^Δ35/Δ41) resulted in flightless mosquitoes with an abnormal open wing posture. The inability of adult strn^Δ35/Δ41 mosquitoes to fly restricted their escape from aquatic rearing media following eclosion, and substantially reduced adult survival rates. Transgenic strains which contain the EGFP marker gene under the control of strn regulatory regions (0.8 kb, 1.4 kb, and 2.2 kb upstream, respectively), revealed the gene expression pattern of strn in muscle-like tissues in the thorax during late morphogenesis from L₄ larvae to young adults. We demonstrated that Ae. aegypti pupae-specific strn is critical for adult mosquito flight capability and a key late-acting lethal target for mosquito-borne disease control.

Involvement of the transcription factor E75 in adult cuticular formation in the red flour beetle Tribolium castaneum

Insect adult metamorphosis generally proceeds with undetectable levels of juvenile hormone (JH). In adult development of the red flour beetle Tribolium castaneum, biosynthesis of adult cuticle followed by its pigmentation and sclerotization occurs, and dark coloration of the cuticle becomes visible in pharate adults. Here, we examined the molecular mechanism of adult cuticular formation in more detail. We noticed that an exogenous JH mimic (JHM) treatment of Day 0 pupae did not inhibit pigmentation or sclerotization, but instead, induced precocious pigmentation of adult cuticle two days in advance. Quantitative RT-PCR analyses revealed that ecdysone-induced protein 75B (E75) is downregulated in JHM-treated pupae. Meanwhile, tyrosine hydroxylase (Th), an enzyme involved in cuticular pigmentation and sclerotization, was precociously induced, whereas a structural cuticular protein CPR27 was downregulated, by exogenous JHM treatment. RNA interference-mediated knockdown of E75 resulted in precocious adult cuticular pigmentation, which resembled the phenotype caused by JHM treatment. Notably, upregulation of Th as well as suppression of CPR27 were observed with E75 knockdown. Meanwhile, JHM treatment suppressed the expression of genes involved in melanin synthesis, such as Yellow-y and Laccase 2, but E75 knockdown did not result in marked reduction in their expression. Taken together, these results provided insights into the regulatory mechanisms of adult cuticular formation; the transcription of genes involved in adult cuticular formation proceeds in a proper timing with undetectable JH, and exogenous JHM treatment disturbs their transcription. For some of these genes such as Th and CPR27, E75 is involved in transcriptional regulation. This study shed light on the molecular mode of action of JHM as insecticides; exogenous JHM treatment disturbed the expression of genes involved in the adult cuticular formation, which resulted in lethality as pharate adults.

Insect Cuticular Chitin Contributes to Form and Function

Chitin contributes to the rigidity of the insect cuticle and serves as an attachment matrix for other cuticular proteins. Deficiency of chitin results in abnormal embryos, cuticular structural defects and growth arrest. When chitin is not turned over during molting, the developing insect is trapped inside the old cuticle. Partial deacetylation of cuticular chitin is also required for proper laminar organization of the cuticle and vertical pore canals, molting, and locomotion. Thus, chitin and its modifications strongly influence the structure of the exoskeleton as well as the physiological functions of the insect. Internal tendons and specialized epithelial cells called "tendon cells" that arise from the outer layer of epidermal cells provide attachment sites at both ends of adult limb muscles. Membrane processes emanating from both tendon and muscle cells interdigitate extensively to strengthen the attachment of muscles to the extracellular matrix (ECM). Protein ligands that bind to membrane-bound integrin complexes further enhance the adhesion between muscles and tendons. Tendon cells contain F-actin fiber arrays that contribute to their rigidity. In the cytoplasm of muscle cells, proteins such as talin and other proteins provide attachment sites for cytoskeletal actin, thereby increasing integrin binding and activation to mechanically couple the ECM with actin in muscle cells. Mutations in integrins and their ligands, as well as depletion of chitin deacetylases, result in defective locomotion and muscle detachment from the ECM. Thus, chitin in the cuticle and chitin deacetylases strongly influence the shape and functions of the exoskeleton as well as locomotion of insects.

Excess melanin precursors rescue defective cuticular traits in stony mutant silkworms probably by upregulating four genes encoding RR1-type larval cuticular proteins

Melanin and cuticular proteins are vital cuticle components in insects. Cuticular defects caused by mutations in cuticular protein-encoding genes can obstruct melanin deposition. The effects of changes in melanin on the expression of cuticular protein-encoding genes, the cuticular and morphological traits, and the origins of these effects are unknown. We found that the cuticular physical characteristics and the expression patterns of larval cuticular protein-encoding genes markedly differed between the melanic and non-melanic integument regions. By using four p multiple-allele color pattern mutants with increasing degrees of melanism (+^p, p^M, p^S, and p^B), we found that the degree of melanism and the expression of four RR1-type larval cuticular protein-encoding genes (BmCPR2, BmLcp18, BmLcp22, and BmLcp30) were positively correlated. By modulating the content of melanin precursors and the expression of cuticular protein-encoding genes in cells in tissues and in vivo, we showed that this positive correlation was due to the induction of melanin precursors. More importantly, the melanism trait introduced into the BmCPR2 deletion strain Dazao-stony induced up-regulation of three other similar chitin-binding characteristic larval cuticular protein-encoding genes, thus rescuing the cuticular, morphological and adaptability defects of the Dazao-stony strain. This rescue ability increased with increasing melanism levels. This is the first study reporting the induction of cuticular protein-encoding genes by melanin and the biological importance of this induction in affecting the physiological characteristics of the cuticle.

Cuticular Structure Proteomics in the Pea Aphid Acyrthosiphon pisum Reveals New Plant Virus Receptor Candidates at the Tip of Maxillary Stylets

Aphids are phloem-feeding insects known as major pests in agriculture that are able to transmit hundreds of plant viruses. The majority of these viruses, classified as noncirculative, are retained and transported on the inner surface of the cuticle of the needle-like mouthparts while the aphids move from plant to plant. Identification of receptors of viruses within insect vectors is a key challenge because they are promising targets for alternative control strategies. The acrostyle, an organ discovered earlier within the common food/salivary canal at the tip of aphid maxillary stylets, displays proteins at the cuticle-fluid interface, some of which are receptors of noncirculative viruses. To assess the presence of stylet- and acrostyle-specific proteins and identify putative receptors, we have developed a comprehensive comparative analysis of the proteomes of four cuticular anatomical structures of the pea aphid, stylets, antennae, legs, and wings. In addition, we performed systematic immunolabeling detection of the cuticular proteins identified by mass spectrometry in dissected stylets. We thereby establish the first proteome of stylets of an insect and determine the minimal repertoire of the cuticular proteins composing the acrostyle. Most importantly, we propose a short list of plant virus receptor candidates, among which RR-1 proteins are remarkably predominant. The data are available via ProteomeXchange (PXD016517).

Progress and prospects of arthropod chitin pathways and structures as targets for pest management

Chitin is a structural component of the arthropod cuticular exoskeleton and the peritrophic matrix of the gut, which play crucial roles in growth and development. In the past few decades, our understanding of the composition, biosynthesis, assembly, degradation, and regulation of chitinous structures has increased. Many chemicals have been developed that target chitin biosynthesis (benzoyphenyl ureas, etoxazole), chitin degradation (allosamidin, psammaplin), and chitin regulation (benzoyl hydrazines), thus resulting in molting deformities and lethality. In addition, proteins that disrupt chitin structures, such as lectins, proteases, and chitinases have been utilized to halt feeding and induce mortality. Chitin-degrading enzymes, such as chitinases are also useful for improving the efficacy of bio-insecticides. Transgenic plants, baculoviruses, fungi, and bacteria have been engineered to express chitinases from a variety of organisms for control of arthropod pests. In addition, RNA interference targeting genes involved in chitin pathways and structures are now being investigated for the development of environmentally friendly pest management strategies. This review describes the chemicals and proteins used to target chitin structures and enzymes for arthropod pest management, as well as pest management strategies based upon these compounds, such as plant-incorporated-protectants and recombinant entomopathogens. Recent advances in RNA interference-based pest management, and how this technology can be used to target chitin pathways and structures are also discussed.

Comparative transcriptomic analysis and endocuticular protein gene expression of alate adults, workers and soldiers of the termite Reticulitermes aculabialis

BACKGROUND

The insect cuticle is mainly composed of exocuticle and endocuticle layers that consist of a large number of structural proteins. The thickness and synthesis of the exocuticle depend on different castes that perform various functions in alates, workers and soldiers. However, it is not clear whether the soft endocuticle is involved in the division of labour in termite colonies. To reveal the structural characteristics of the endocuticle in different castes, we investigated the thickness of endocuticle layers in alates, workers and soldiers of the termite Reticulitermes aculabialis, and then we sequenced their transcriptome and detected the endocuticle protein genes. The differential expression levels of the endocuticular protein genes were confirmed in the three castes.

RESULTS

We found that there was a great difference in the thickness of the endocuticle among the alates, soldiers and workers. The thickest endocuticle layers were found in the heads of the workers 7.88 ± 1.67 μm. The endocuticle layer in the head of the workers was approximately three-fold and nine-fold thicker than that in the heads of soldiers and alates, respectively. The thinnest endocuticle layers occurred in the head, thorax and abdomen of alates, which were 0.86 ± 0.15, 0.76 ± 0.24 and 0.52 ± 0.17 μm thick, respectively, and had no significant differences. A total of 43,531,650 clean sequencing reads was obtained, and 89,475 unigenes were assembled. Of the 70 identified cuticular protein genes, 10 endocuticular genes that belong to the RR-1 family were selected. qRT-PCR analysis of the five endocuticular genes (SgAbd-2, SgAbd-9, Abd-5, SgAbd-2-like and Abd-4-like) revealed that the endocuticle genes were more highly expressed in workers than in soldiers and alates.

CONCLUSION

These results suggest that SgAbd and Abd are the key components of the endocuticle. We infer that the thicker endocuticle in workers is helpful for them to perform their functions against environmental stress.

The wing-specific cuticular protein LmACP7 is essential for normal wing morphogenesis in the migratory locust

Wings are an indispensable structure in many insects for their foraging, courtship, escape from predators, and migration. Cuticular proteins are major components of the insect cuticle and wings, but there is limited information on how cuticular proteins may play an essential role in wing morphogenesis. We identified a wing-specific cuticular protein, LmACP7, which belongs to the RR-2 subfamily of CPR chitin-binding proteins in the migratory locust. LmACP7 was initially produced in epidermal cells and subsequently migrated to the exocuticle at the pre-ecdysial stage in adult wings. Depletion of LmACP7 transcripts by RNA interference markedly reduced its protein amounts, which consequently led to abnormal wing morphogenesis. The deformed wings were curved, wrinkled, and failed to fully expand. We further demonstrated that the deformation was caused by both severe damage of the endocuticle and death of the epidermal cells in the wings. Based on these data, we propose that LmACP7 not only serves as an essential structural protein in the wing but is also required for the integrity of wing epithelial cells. LmACP7 contributes to production of the wing endocuticle and to the morphogenesis of functional wings in the migratory locust.

LmCDA1 organizes the cuticle by chitin deacetylation in Locusta migratoria

Cells produce an extracellular matrix (ECM) with a stereotypic organization that is important for tissue function. The insect cuticle is a layered ECM that mainly consists of the polysaccharide chitin and associated proteins adopting a quasi-crystalline structure. Our understanding of the molecular mechanisms deployed during construction of the highly ordered protein-chitin ECM so far is limited. In this study, we report on the role of the chitin deacetylase 1 (LmCDA1) in the organization of the protein-chitin ECM in the migratory locust Locusta migratoria, and LmCDA1 localizes predominantly to the apical tier of the protein-chitin ECM, but it is also found in lower regions. Reduction of LmCDA1 function correlates with lower amounts of chitin and impedes conversion of chitin to chitosan by deacetylation. Establishment of the quasi-crystalline architecture of the protein-chitin ECM is, however, independent of LmCDA1 activity, but it is dependent on another chitin deacetylase, LmCDA2, which has no detectable effects on chitin deacetylation and, as shown previously, no influence on chitin content. Our data reveal that LmCDA1 and LmCDA2 act in parallel and independently from each other in defining the dimensions of the cuticle. Both enzymes are non-uniformly distributed within the protein-chitin matrix, suggesting a site-autonomous function.

Inhibition of fatty acid desaturation impairs cuticle differentiation in Drosophila melanogaster

Previously, we showed that inhibition of the activity of fatty acid desaturases (Desat) perturbs signalling of the developmental timing hormone ecdysone in the fruit fly Drosophila melanogaster. To understand the impact of this effect on cuticle differentiation, a process regulated by ecdysone, we analysed the cuticle of D. melanogaster larvae fed with the Desat inhibitor CA10556. In these larvae, the expression of most of the key cuticle genes is normal or slightly elevated at day one of CA10556 feeding. As an exception, expression of twdlM coding for a yet uncharacterised cuticle protein is completely suppressed. The cuticle of these larvae appears to be normal at the morphological level. However, these animals are sensitive to desiccation, a trait that according to our data, among others, may be associated with reduced TwdlM amounts. At day two of CA10556 feeding, expression of most of the cuticle genes tested including twdlM is suppressed. Expression of cpr47Eb coding for a chitin-binding protein is, by contrast, highly elevated suggesting that Cpr47Eb participates at a specific compensation program. Overall, the cuticle of these larvae is thinner than the cuticle of control larvae. Taken together, lipid desaturation is necessary for a coordinated deployment of a normal cuticle differentiation program.

Exploring integument transcriptomes, cuticle ultrastructure, and cuticular hydrocarbons profiles in eusocial and solitary bee species displaying heterochronic adult cuticle maturation

Differences in the timing of exoskeleton melanization and sclerotization are evident when comparing eusocial and solitary bees. This cuticular maturation heterochrony may be associated with life style, considering that eusocial bees remain protected inside the nest for many days after emergence, while the solitary bees immediately start outside activities. To address this issue, we characterized gene expression using large-scale RNA sequencing (RNA-seq), and quantified cuticular hydrocarbon (CHC) through gas chromatography-mass spectrometry in comparative studies of the integument (cuticle plus its underlying epidermis) of two eusocial and a solitary bee species. In addition, we used transmission electron microscopy (TEM) for studying the developing cuticle of these and other three bee species also differing in life style. We found 13,200, 55,209 and 30,161 transcript types in the integument of the eusocial Apis mellifera and Frieseomelitta varia, and the solitary Centris analis, respectively. In general, structural cuticle proteins and chitin-related genes were upregulated in pharate-adults and newly-emerged bees whereas transcripts for odorant binding proteins, cytochrome P450 and antioxidant proteins were overrepresented in foragers. Consistent with our hypothesis, a distance correlation analysis based on the differentially expressed genes suggested delayed cuticle maturation in A. mellifera in comparison to the solitary bee. However, this was not confirmed in the comparison with F. varia. The expression profiles of 27 of 119 genes displaying functional attributes related to cuticle formation/differentiation were positively correlated between A. mellifera and F. varia, and negatively or non-correlated with C. analis, suggesting roles in cuticular maturation heterochrony. However, we also found transcript profiles positively correlated between each one of the eusocial species and C. analis. Gene co-expression networks greatly differed between the bee species, but we identified common gene interactions exclusively between the eusocial species. Except for F. varia, the TEM analysis is consistent with cuticle development timing adapted to the social or solitary life style. In support to our hypothesis, the absolute quantities of n-alkanes and unsaturated CHCs were significantly higher in foragers than in the earlier developmental phases of the eusocial bees, but did not discriminate newly-emerged from foragers in C. analis. By highlighting differences in integument gene expression, cuticle ultrastructure, and CHC profiles between eusocial and solitary bees, our data provided insights into the process of heterochronic cuticle maturation associated to the way of life.

Chitinous Structures as Potential Targets for Insect Pest Control

Chitinous structures are physiologically fundamental in insects. They form the insect exoskeleton, play important roles in physiological systems and provide physical, chemical and biological protections in insects. As critically important structures in insects, chitinous structures are attractive target sites for the development of new insect-pest-control strategies. Chitinous structures in insects are complex and their formation and maintenance are dynamically regulated with the growth and development of insects. In the past few decades, studies on insect chitinous structures have shed lights on the physiological functions, compositions, structural formation, and regulation of the chitinous structures. Current understanding of the chitinous structures has indicated opportunities for exploring new target sites for insect control. Mechanisms to disrupt chitinous structures in insects have been studied and strategies for the potential development of new means of insect control by targeting chitinous structures have been proposed and are practically to be explored.

Trynity controls epidermal barrier function and respiratory tube maturation in Drosophila by modulating apical extracellular matrix nano-patterning

The outer surface of insects is covered by the cuticle, which is derived from the apical extracellular matrix (aECM). The aECM is secreted by epidermal cells during embryogenesis. The aECM exhibits large variations in structure, function, and constituent molecules, reflecting the enormous diversity in insect appearances. To investigate the molecular principles of aECM organization and function, here we studied the role of a conserved aECM protein, the ZP domain protein Trynity, in Drosophila melanogaster. We first identified trynity as an essential gene for epidermal barrier function. trynity mutation caused disintegration of the outermost envelope layer of the cuticle, resulting in small-molecule leakage and in growth and molting defects. In addition, the tracheal tubules of trynity mutants showed defects in pore-like structures of the cuticle, and the mutant tracheal cells failed to absorb luminal proteins and liquid. Our findings indicated that trynity plays essential roles in organizing nano-level structures in the envelope layer of the cuticle that both restrict molecular trafficking through the epidermis and promote the massive absorption pulse in the trachea.

Comparative Analysis of the Integument Transcriptomes between Stick Mutant and Wild-Type Silkworms

In insects, the integument provides mechanical support for the whole body and protects them from infections, physical and chemical injuries, and dehydration. Diversity in integument properties is often related to body shape, behavior, and survival rate. The stick (sk) silkworm is a spontaneous mutant with a stick-like larval body that is firm to the touch and, thus, less flexible. Analysis of the mechanical properties of the cuticles at day 3 of the fifth instar (L5D3) of sk larvae revealed higher storage modulus and lower loss tangent. Transcriptome sequencing identified a total of 19,969 transcripts that were expressed between wild-type Dazao and the sk mutant at L5D2, of which 11,596 transcripts were novel and detected in the integument. Differential expression analyses identified 710 upregulated genes and 1009 downregulated genes in the sk mutant. Gene Ontology (GO) enrichment analysis indicated that four chitin-binding peritrophin A domain genes and a chitinase gene were upregulated, whereas another four chitin-binding peritrophin A domain genes, a trehalase, and nine antimicrobial peptides were downregulated. Kyoto Encyclopedia of Genes and Genomes (KEGG) analysis indicated that two functional pathways, namely, fructose and mannose metabolism and tyrosine metabolism, were significantly enriched with differentially-expressed transcripts. This study provides a foundation for understanding the molecular mechanisms underlying the development of the stiff exoskeleton in the sk mutant.

Cuticular protein defective Bamboo mutant of Bombyx mori is sensitive to environmental stresses

Insect cuticle acts as a primary protective barrier against environment stresses that may directly impact the insect body. Here, we report the mechanical defense function of a structural cuticular protein, BmorCPH24, to environmental stresses using a silkworm Bamboo (Bo) mutant with this gene mutation. Ultraviolet (UV) irradiation and topical application of an acetone insecticide were used as environmental stresses to determine the differences in susceptibility between Bo and wild-type larvae. UV irradiation resulted in a sunburn phenotype in the Bo strains earlier than the wild-type indicating the sensitivity of Bo. Higher malondialdehyde (MDA) content and a lower survival ratio were also observed in the Bo strains. Treatment with deltamethrin revealed that Bo larvae were more sensitive to insecticides than the wild-type. Furthermore, cuticle analysis by microsection revealed thinner cuticle and a significant decrease in the endocuticle layer (∼64.0%) in Bo. These results suggest that BmorCPH24 mutation can lead to deficiency in resources required to construct the cuticle in Bo resulting in thin cuticle and reduced resistance to UV and insecticides. These results provide us new insight into the role of structural cuticular proteins in insect cuticle against environment stresses.

Future questions in insect chitin biology: A microreview

This microreview stems from the Second Symposium on Insect Molecular Toxicology and Chitin Metabolism held at Shanxi University in Taiyuan, China (June 27 to 30, 2017) at the institute for Applied Biology headed by Professor Enbo Ma and Professor Jianzhen Zhang.

3,4-Dihydroxyphenylacetaldehyde synthase and cuticle formation in insects

Cuticle is the most important structure that protects mosquitoes and other insect species from adverse environmental conditions and infections of microorganism. The physiology and biochemistry of insect cuticle formation have been studied for many years and our understanding of cuticle formation and hardening has increased considerably. This is especially true for flexible cuticle. The recent discovery of a novel enzyme that catalyzes the production of 3,4-dihydroxyphenylacetaldehyde (DOPAL) in insects provides intriguing insights concerning the flexible cuticle formation in insects. For convenience, the enzyme that catalyzes the production DOPAL from l-dopa is named DOPAL synthase. In this mini-review, we summarize the biochemical pathways of cuticle formation and hardening in general and discuss DOPAL synthase-mediated protein crosslinking in insect flexible cuticle in particular.

A comprehensive omics analysis and functional survey of cuticular proteins in the brown planthopper

The cuticle, mainly composed of chitin and cuticular proteins (CPs), is a multifunctional structure of arthropods. CPs usually account for >1% of the total insect proteins encoded in the genome. Why does an insect need so many different CPs? In this study, we use comprehensive large-scale technologies to study the full complement of CPs and their functions in the brown planthopper (BPH). A total of 32 of the 140 BPH CP genes are found to be essential for nymph/adult development, egg production, or embryo development; in addition, redundant and complementary functions of CPs are revealed.

Cuticle, mainly composed of chitin and cuticular proteins (CPs), is a multifunctional structure of arthropods. CPs usually account for >1% of the total insect proteins. Why does an insect encode so many different CP genes in the genome? In this study, we use comprehensive large-scale technologies to study the full complement of CPs (i.e., the CP-ome) of the brown planthopper (BPH), Nilaparvata lugens, a major rice plant pest. Eight CP families (CPR, CPF, TWDL, CPLCP, CPG, CPAP1, CPAP3, and CPAPn) including 140 proteins in BPH, in which CPAPn is a CP family that we discovered. The CPG family that was considered to be restricted to the Lepidoptera has also been identified in BPH. As reported here, CPLCP family members are characterized by three conserved sequence motifs. In addition, we identified a testis protein family with a peritrophin A domain that we named TPAP. We authenticated the real existence of 106 proteins among the 140 CPs. RNA interference (RNAi) experiments were conducted against 135 CP genes in early- and late-instar nymphs and newly emerged female adults, demonstrating that 32 CPs were essential for BPH normal development or egg production. Combined RNAi experiments suggested redundant and complementary functions of the large number of CPs. Transcriptomic data revealed that the CP genes were expressed in a tissue-specific manner, and there were four clusters of developmental expression patterns. This study gives a comprehensive understanding of the roles of CPs in an insect cuticle.

A chitinase with two catalytic domains is required for organization of the cuticular extracellular matrix of a beetle

Insect cuticle or exoskeleton is an extracellular matrix formed primarily from two different structural biopolymers, chitin and protein. During each molt cycle, a new cuticle is deposited simultaneously with degradation of the inner part of the chitinous procuticle of the overlying old exoskeleton by molting fluid enzymes including epidermal chitinases. In this study we report a novel role for an epidermal endochitinase containing two catalytic domains, TcCHT7, from the red flour beetle, Tribolium castaneum, in organizing chitin in the newly forming cuticle rather than in degrading chitin present in the prior one. Recombinant TcCHT7 expressed in insect cells is membrane-bound and capable of hydrolyzing an extracellular chitin substrate, whereas in vivo, this enzyme is also released from the plasma membrane and co-localizes with chitin in the entire procuticle. RNAi of TcCHT7 reveals that this enzyme is nonessential for any type of molt or degradation of the chitinous matrix in the old cuticle. In contrast, TcCHT7 is required for maintaining the integrity of the cuticle as a compact structure of alternating electron-dense and electron-lucent laminae. There is a reduction in thickness of elytral and leg cuticles after RNAi for TcCHT7. TcCHT7 is also required for formation of properly oriented long chitin fibers inside pore canals that are vertically oriented columnar structures, which contribute to the mechanical strength of a light-weight, yet rigid, adult cuticle. The conservation of CHT7-like proteins harboring such a unique domain configuration among many insect and other arthropod species indicates a critical role for the group III class of chitinases in the higher ordered organization of chitin fibers for development of the structural integrity of many invertebrate exoskeletons.

Insect cuticle or exoskeleton is an extracellular matrix consisting of three major morphologically distinct layers, the water-proofing envelope, the protein-rich epicuticle and the chitin/protein-rich procuticle. To accommodate growth, insects must periodically replace their cuticles in a process called “molting or ecdysis”. During each molt cycle a new cuticle is deposited simultaneously with degradation of the inner part of the chitinous procuticle of the old one by molting fluid enzymes including epidermal chitinases. We show that a chitinase, CHT7, from the red flour beetle, Tribolium castaneum, belonging to a subfamily (group III) of chitinases that have two catalytic domains, is necessary for organization of chitin-containing structures in nascent cuticle, which contributes to the rigidity of the extracellular matrix. This unexpected function is distinct from that of other groups of epidermal chitinases that catalyze the turnover of chitin in old cuticle during the molting process. Because group III chitinases are highly conserved among insect and other arthropod species, we propose that these enzymes have a novel function in processing nascent chitin chains during cuticle assembly and organization into higher order structures that include horizontally stacked laminae and vertically oriented pore canals of many invertebrate cuticular extracellular matrices.

Group I chitin deacetylases are essential for higher order organization of chitin fibers in beetle cuticle

Roles in the organization of the cuticle (exoskeleton) of two chitin deacetylases (CDAs) belonging to group I, TcCDA1 and TcCDA2, as well as two alternatively spliced forms of the latter, TcCDA2a and TcCDA2b, from the red flour beetle, Tribolium castaneum, were examined in different body parts using transmission EM and RNAi. Even though all TcCDAs are co-expressed in cuticle-forming cells from the hardened forewing (elytron) and ventral abdomen, as well as in the softer hindwing and dorsal abdomen, there are significant differences in the tissue specificity of expression of the alternatively spliced transcripts. Loss of either TcCDA1 or TcCDA2 protein by RNAi causes abnormalities in organization of chitinous horizontal laminae and vertical pore canals in all regions of the procuticle of both the hard and soft cuticles. Simultaneous RNAi for TcCDA1 and TcCDA2 produces the most serious abnormalities. RNAi of either TcCDA2a or TcCDA2b affects cuticle integrity to some extent. Following RNAi, there is accumulation of smaller disorganized fibers in both the horizontal laminae and pore canals, indicating that TcCDAs play a critical role in elongation/organization of smaller nanofibers into longer fibers, which is essential for structural integrity of both hard/thick and soft/thin cuticles. Immunolocalization of TcCDA1 and TcCDA2 proteins and effects of RNAi on their accumulation indicate that these two proteins function in concert exclusively in the assembly zone in a step involving the higher order organization of the procuticle.

Culex pipiens pallens cuticular protein CPLCG5 participates in pyrethroid resistance by forming a rigid matrix

Background

Chemical insecticides have hugely reduced the prevalence of vector-borne diseases around the world, but resistance threatens their continued effectiveness. Despite its importance, cuticle resistance is an under-studied area, and exploring the detailed molecular basis of resistance is critical for implementing suitable resistance management strategies.

Methods

We performed western blotting of cuticular protein CPLCG5 in deltamethrin-susceptible (DS) and laboratory-produced deltamethrin-resistant (DR) strains of Culex pipiens pallens. Immunofluorescence assays using a polyclonal antibody to locate cuticular CPLCG5 in mosquitoes. EM immunohistochemical analysis of the femur segment was used to compare the cuticle in control and CPLCG5-deficient siRNA experimental groups.

Results

The gene CPLCG5 encodes a cuticle protein that plays an important role in pyrethroid resistance. Based on a prior study, we found that expression of CPLCG5 was higher in the resistant (DR) strain than the susceptible (DS) strain. CPLCG5 transcripts were abundant in white pupae and 1-day-old adults, but expression was dramatically decreased in 3-day-old adults, then remained stable thereafter. Western blotting revealed that the CPLCG5 protein was ~2.2-fold higher in the legs of the DR strain than the DS strain. Immunofluorescence assays revealed CPLCG5 expression in the head, thorax, abdomen, wing, and leg, and expression most abundant in the leg and wing. EM immunohistochemical analysis suggested that the exocuticle thickness of the femur was significantly thinner in the CPLCG5-deficient siCPLCG5 strain (0.717 ± 0.110 μm) than the siNC strain (0.946 ± 0.126 μm). Depletion of CPLCG5 by RNA interference resulted in unorganised laminae and a thinner cuticle.

Conclusions

The results suggest CPLCG5 participates in pyrethroid resistance by forming a rigid matrix and increasing the thickness of the cuticle.

Electronic supplementary material

The online version of this article (doi: 10.1186/s13071-017-2567-9) contains supplementary material, which is available to authorized users.

Development and ultrastructure of the rigid dorsal and flexible ventral cuticles of the elytron of the red flour beetle, Tribolium castaneum

Insect exoskeletons are composed of the cuticle, a biomaterial primarily formed from the linear and relatively rigid polysaccharide, chitin, and structural proteins. This extracellular material serves both as a skin and skeleton, protecting insects from environmental stresses and mechanical damage. Despite its rather limited compositional palette, cuticles in different anatomical regions or developmental stages exhibit remarkably diverse physicochemical and mechanical properties because of differences in chemical composition, molecular interactions and morphological architecture of the various layers and sublayers throughout the cuticle including the envelope, epicuticle and procuticle (exocuticle and endocuticle). Even though the ultrastructure of the arthropod cuticle has been studied rather extensively, its temporal developmental pattern, in particular, the synchronous development of the functional layers in different cuticles during a molt, is not well understood. The beetle elytron, which is a highly modified and sclerotized forewing, offers excellent advantages for such a study because it can be easily isolated at precise time points during development. In this study, we describe the morphogenesis of the dorsal and ventral cuticles of the elytron of the red flour beetle, Tribolium castaneum, during the period from the 0 d-old pupa to the 9 d-old adult. The deposition of exocuticle and mesocuticle is substantially different in the two cuticles. The dorsal cuticle is four-fold thicker than the ventral. Unlike the ventral cuticle, the dorsal contains a thicker exocuticle consisting of a large number of horizontal laminae and vertical pore canals with pore canal fibers and rib-like veins and bristles as well as a mesocuticle, lying right above the enodcuticle. The degree of sclerotization appears to be much greater in the dorsal cuticle. All of these differences result in a relatively thick and tanned rigid dorsal cuticle and a much thinner and less pigmented membrane-like ventral cuticle.

Body Shape and Coloration of Silkworm Larvae Are Influenced by a Novel Cuticular Protein

The genetic basis of body shape and coloration patterns on caterpillars is often assumed to be regulated separately, but it is possible that common molecules affect both types of trait simultaneously. Here we examine the genetic basis of a spontaneous cuticle defect in silkworm, where larvae exhibit a bamboo-like body shape and decreased pigmentation. We performed linkage mapping and mutation screening to determine the gene product that affects body shape and coloration simultaneously. In these mutant larvae we identified a null mutation in BmorCPH24, a gene encoding a cuticular protein with low complexity sequence. Spatiotemporal expression analyses showed that BmorCPH24 is expressed in the larval epidermis postecdysis. RNAi-mediated knockdown and CRISPR/Cas9-mediated knockout of BmorCPH24 produced the abnormal body shape and the inhibited pigment typical of the mutant phenotype. In addition, our results showed that BmorCPH24 may be involved in the synthesis of endocuticle and its disruption-induced apoptosis of epidermal cells that accompanied the reduced expression of R&R-type larval cuticle protein genes and pigmentation gene Wnt1 Strikingly, BmorCPH24, a fast-evolving gene, has evolved a new function responsible for the assembly of silkworm larval cuticle and has evolved to be an indispensable factor maintaining the larval body shape and its coloration pattern. This is the first study to identify a molecule whose pleiotropic function affects the development of body shape and color patterns in insect larvae.

Cuticle genes CpCPR63 and CpCPR47 may confer resistance to deltamethrin in Culex pipiens pallens

Cuticular proteins (CPs) are implicated in insecticide resistance in mosquito populations. Here, we investigated the role of cuticular genes in regulation of insecticide resistance in Culex pipiens pallens. We identified two CpCPRs (CpCPR63 and CpCPR47) that exhibited higher transcript levels in pyrethroid-resistant strains than in susceptible strains. Mosquito mortality was increased after knockdown of CpCPR genes by dsRNA injection. The RNA interference experiment suggested an interaction between CpCPR63 and CpCPR47, as silencing of one gene resulted in decreased expression of the other. These findings revealed that CpCPRs may regulate pyrethroid resistance and could be used as a potential genetic marker to monitor pyrethroid resistance in mosquitoes.

The Cuticle Protein Gene MPCP4 of Myzus persicae (Homoptera: Aphididae) Plays a Critical Role in Cucumber Mosaic Virus Acquisition

Myzus persicae (Sulzer) (Homoptera: Aphididae) is one of the most important agricultural pests worldwide. In addition to sucking phloem sap, M. persicae also transmits Cucumber mosaic virus (CMV) as a vector in a nonpersistent manner. At present, the infection mechanism remains unclear, especially the process of aphid virus acquisition. In this study, we isolated four M. persicae cuticle protein genes (MPCP1, MPCP2, MPCP4, and MPCP5) from M. persicae. The relative amount of the gene encoding Cucumber mosaic virus capsid protein (CMV CP) and the transcript levels of these four cuticle protein genes were investigated in aphid virus acquisition by feeding the tobacco preinfested by CMV. The relative expression of MPCP1, MPCP2, and MPCP4 were significantly higher than MPCP5 at 24 h after aphids feeding on virus-infested tobacco. Yeast two-hybrid assays demonstrated that the protein encoded by MPCP4 gene was closely associated with the CMV CP through the direct interaction. Moreover, the ability of M. persicae to acquire CMV was suppressed by RNA interference of MPCP4. All these lines of evidence indicate that MPCP4, as a viral putative receptor in the stylet of aphid, plays an important role in aphid acquisition of CMV.

Localization of RR-1 and RR-2 cuticular proteins within the cuticle of Anopheles gambiae

The largest arthropod cuticular protein family, CPR, has the Rebers and Riddiford (R&R) Consensus that in an extended form confers chitin-binding properties. Two forms of the Consensus, RR-1 and RR-2, have been recognized and initial data suggested that the RR-1 and RR-2 proteins were present in different regions within the cuticle itself. Thus, RR-2 proteins would contribute to exocuticle that becomes sclerotized, while RR-1s would be found in endocuticle that remains soft. An alternative, and more common, suggestion is that RR-1 proteins are used for soft, flexible cuticles such as intersegmental membranes, while RR-2s are associated with hard cuticle such as sclerites and head capsules. We used TEM immunogold detection to localize the position of several RR-1 and RR-2 proteins in the cuticle of Anopheles gambiae. RR-1s were localized in the procuticle of the soft intersegmental membrane except for one protein found in the endocuticle of hard cuticle. RR-2s were consistently found in hard cuticle and not in flexible cuticle. All RR-2 antibodies localized to the exocuticle and four out of six were also found in the endocuticle. Hence the location of RR-1s and RR-2s depends more on properties of individual proteins than on either hypothesis.