A screen for spore wall permeability mutants identifies a secreted protease required for proper spore wall assembly

Remodeling of the secretory pathway is coordinated with de novo membrane formation in budding yeast gametogenesis

Gametogenesis in budding yeast involves a large-scale rearrangement of membrane traffic to allow the de novo formation of a membrane, called the prospore membrane (PSM). However, the mechanism underlying this event is not fully elucidated. Here, we show that the number of endoplasmic reticulum exit sites (ERES) per cell fluctuates and switches from decreasing to increasing upon the onset of PSM formation. Reduction in ERES number, presumably accompanying a transient stall in membrane traffic, resulting in the loss of preexisting Golgi apparatus from the cell, was followed by local ERES regeneration, leading to Golgi reassembly in nascent spores. We have revealed that protein phosphatase-1 (PP-1) and its development-specific subunit, Gip1, promote ERES regeneration through Sec16 foci formation. Furthermore, sed4Δ, a mutant with impaired ERES formation, showed defects in PSM growth and spore formation. Thus, ERES regeneration in nascent spores facilitates the segregation of membrane traffic organelles, leading to PSM growth.

Preparation of spore-immobilized glutathione reductase and its application in inhibiting browning of pear wine

BACKGROUND

Browning is the key problem hindering the industrialization of pear wine. The use of high-yield glutathione Saccharomyces cerevisiae in the fermentation of pear wine can inhibit browning. Glutathione reductase (GR) can ensure the reduction of glutathione. Spore immobilization of enzymes is a new technology. It is a new attempt to apply spore-immobilized GR in combination with high-yield glutathione S. cerevisiae to inhibit browning of pear wine.

RESULTS

Saccharomyces cerevisiae spore immobilization enzyme technology was used to immobilize GR in the spores of mutant S. cerevisiae dit1∆, osw2∆ and chs3∆ and wild-type S. cerevisiae. The enzyme activity of GR immobilized by chs3∆ spores was the highest of 3.08 U mg-1 min-1. The chs3∆ spore-immobilized GR had certain resistance to ethanol, citric acid, sucrose, glucose and proteinase K. Electron microscopy analysis showed that the spore wall of chs3∆ had moderate size holes, which might be the main reason why it immobilized GR with the highest enzyme activity. And the GR was immobilized between the prespore membrane and mannoprotein layer of the spore wall. When chs3∆ spore-immobilized GR (chs3∆-GR) was added to Dangshan pear wine fermented by high-yield glutathione S. cerevisiae JN32-9, the presence of chs3∆-GR could further protect amino acids, polyphenols and glucose from oxidation, thereby reducing the browning of the pear wine during storage by 47.32%.

CONCLUSION

GR immobilized by S. cerevisiae spores was effective in inhibiting the browning of pear wine. The method was simple, green and effective and did not increase the production cost of pear wine. © 2024 Society of Chemical Industry.

Distinct requirements for the COMPASS core subunits Set1, Swd1, and Swd3 during meiosis in the budding yeast Saccharomyces cerevisiae

Meiosis-specific chromatin structures, guided by histone modifications, are critical mediators of a meiotic transient transcription program and progression through prophase I. Histone H3K4 can be methylated up to three times by the Set1-containing COMPASS complex and each methylation mark corresponds to a different chromatin conformation. The level of H3K4 modification is directed by the activity of additional COMPASS components. In this study, we characterized the role of the COMPASS subunits during meiosis in Saccharomyces cerevisiae. In vegetative cells, previous studies revealed a role for subunits Swd2, Sdc1, and Bre2 for H3K4me2 while Spp1 supported trimethylation. However, we found that Bre2 and Sdc1 are required for H3K4me3 as yeast prepare to enter meiosis while Spp1 is not. Interestingly, we identified distinct meiotic functions for the core COMPASS complex members that required for all H3K4me, Set1, Swd1, and Swd3. While Set1 and Swd1 are required for progression through early meiosis, Swd3 is critical for late meiosis and spore morphogenesis. Furthermore, the meiotic requirement for Set1 is independent of H3K4 methylation, suggesting the presence of nonhistone substrates. Finally, checkpoint suppression analyses indicate that Set1 and Swd1 are required for both homologous recombination and chromosome segregation. These data suggest that COMPASS has important new roles for meiosis that are independent of its well-characterized functions during mitotic divisions.

A fluorescence-based yeast sensor for monitoring acetic acid

Accumulation of acetic acid indicates an imbalance of the process due to a disturbed composition of the microorganisms. Hence, monitoring the acetic acid concentration is an important parameter to control the biogas process. Here, we describe the generation and validation of a fluorescence-based whole cell sensor for the detection of acetic acid based on the yeast Saccharomyces cerevisiae. Acetic acid induces the transcription of a subset of genes. The 5´-regulatory sequences (5´ URS) of these genes were cloned into a multicopy plasmid to drive the expression of a red fluorescent reporter gene. The 5´ URS of YGP1, encoding a cell wall-related glycoprotein, led to a 20-fold increase of fluorescence upon addition of 30 mM acetic acid to the media. We show that the system allows estimating the approximate concentration of acetic acid in condensation samples from a biogas plant. To avoid plasmid loss and increase the long-term stability of the sensor, we integrated the reporter construct into the yeast genome and tested the suitability of spores for long-term storage of sensor cells. Lowering the reporter gene's copy number resulted in a significant drop of the fluorescence, which can be compensated by applying a yeast pheromone-based signal amplification system.

A Conserved Machinery Underlies the Synthesis of a Chitosan Layer in the Candida Chlamydospore Cell Wall

The polysaccharide chitosan is found in the cell wall of specific cell types in a variety of fungal species where it contributes to stress resistance, or in pathogenic fungi, virulence. Under certain growth conditions, the pathogenic yeast Candida dubliniensis forms a cell type termed a chlamydospore, which has an additional internal layer in its cell wall compared to hyphal or yeast cell types. We report that this internal layer of the chlamydospore wall is rich in chitosan. The ascospore wall of Saccharomyces cerevisiae also has a distinct chitosan layer. As in S. cerevisiae, formation of the chitosan layer in the C. dubliniensis wall requires the chitin synthase CHS3 and the chitin deacetylase CDA2 In addition, three lipid droplet-localized proteins-Rrt8, Srt1, and Mum3-identified in S. cerevisiae as important for chitosan layer assembly in the ascospore wall are required for the formation of the chitosan layer of the chlamydospore wall in C. dubliniensis These results reveal that a conserved machinery is required for the synthesis of a distinct chitosan layer in the walls of these two yeasts and may be generally important for incorporation of chitosan into fungal walls.IMPORTANCE The cell wall is the interface between the fungal cell and its environment and disruption of cell wall assembly is an effective strategy for antifungal therapies. Therefore, a detailed understanding of how cell walls form is critical to identify potential drug targets and develop therapeutic strategies. This study shows that a set of genes required for the assembly of a chitosan layer in the cell wall of S. cerevisiae is also necessary for chitosan formation in a different cell type in a different yeast, C. dubliniensis Because chitosan incorporation into the cell wall can be important for virulence, the conservation of this pathway suggests possible new targets for antifungals aimed at disrupting cell wall function.

Efficient chiral synthesis by Saccharomyces cerevisiae spore encapsulation of Candida parapsilosis Glu228Ser/(S)-carbonyl reductase II and Bacillus sp. YX-1 glucose dehydrogenase in organic solvents

BACKGROUND

Saccharomyces cerevisiae AN120 osw2∆ spores were used as a host with good resistance to unfavorable environment. This work was undertaken to develop a new yeast spore-encapsulation of Candida parapsilosis Glu228Ser/(S)-carbonyl reductase II and Bacillus sp. YX-1 glucose dehydrogenase for efficient chiral synthesis in organic solvents.

RESULTS

The spore microencapsulation of E228S/SCR II and GDH in S. cerevisiae AN120 osw2∆ catalyzed (R)-phenylethanol in a good yield with an excellent enantioselectivity (up to 99%) within 4 h. It presented good resistance and catalytic functions under extreme temperature and pH conditions. The encapsulation produced several chiral products with over 70% yield and over 99% enantioselectivity in ethyl acetate after being recycled for 4-6 times. It increased substrate concentration over threefold and reduced the reaction time two to threefolds compared to the recombinant Escherichia coli containing E228S and glucose dehydrogenase.

CONCLUSIONS

This work first described sustainable enantioselective synthesis without exogenous cofactors in organic solvents using yeast spore-microencapsulation of coupled alcohol dehydrogenases.

Osw2 is required for proper assembly of glucan and/or mannan layers of the yeast spore wall

OSW2 is a meiotically-induced gene required for spore wall formation. osw2Δ spores are sensitive to ether treatment. Except for this phenotype, the mutants do not show obvious sporulation defects; thus, its function remains elusive. We found that deletion of both OSW2 and CHS3 results in a synthetic sporulation defect. The spore wall is composed of four layers, and chs3Δ spores lack the outer two (chitosan and dityrosine) layers. Thus, Osw2 is involved in the assembly of the inner (glucan and mannan) layers. In agreement with this notion, a glycosylphosphatidylinositol-anchored protein reporter mislocalizes in osw2Δ spores. The osw2Δ mutation also exhibited a severe synthetic sporulation defect when combined with the deletion of a ß-1,6-glucan synthesis-related gene, BIG1. Osw2 is localized to the prospore membrane during sporulation. However, it disappears in mature spores, indicating that it is not a structural component of the spore wall. Given that Osw2 contains a probable 2-dehydropantoate 2-reductase domain, it may mediate an enzymatic reaction. Osw2 shows a weak similarity to other 2-dehydropantoate 2-reductase domain-containing proteins, Svl3 and Pam1. A pam1Δsvl3Δ mutant exhibits vegetative cell and spore wall defects. Thus, the 2-dehydropantoate 2-reductase domain-containing proteins may have a similar function in glucan and/or mannan layer assembly.

Transcriptome profiling of Issatchenkia orientalis under ethanol stress

Issatchenkia orientalis, a non-Saccharomyces yeast that can resist a wide variety of environmental stresses, has potential use in winemaking and bioethanol production. Little is known about gene expression or the physiology of I. orientalis under ethanol stress. In this study, high-throughput RNA sequencing was used to investigate the transcriptome profile of I. orientalis in response to ethanol. 502 gene transcripts were differentially expressed, of which 451 were more abundant, and 51 less abundant, in cells subjected to 4 h of ethanol stress (10% v/v). Annotation and statistical analyses suggest that multiple genes involved in ergosterol biosynthesis, trehalose metabolism, and stress response are differentially expressed under these conditions. The up-regulation of molecular chaperones HSP90 and HSP70, and also genes associated with the ubiquitin–proteasome proteolytic pathway suggests that ethanol stress may cause aggregation of misfolded proteins. Finally, ethanol stress in I. orientalis appears to have a nitrogen starvation effect, and many genes involved in nutrient uptake were up-regulated.

Dynamic localization of a yeast development-specific PP1 complex during prospore membrane formation is dependent on multiple localization signals and complex formation

Prospore membrane formation of Saccharomyces cerevisiae provides a powerful model for understanding the mechanisms of de novo membrane formation. Protein phosphatase type1, Glc7, and a sporulation-specific targeting subunit, Gip1, show dynamic localization using multiple localization signals and regulate membrane growth during sporulation.

During the developmental process of sporulation in Saccharomyces cerevisiae, membrane structures called prospore membranes are formed de novo, expand, extend, acquire a round shape, and finally become plasma membranes of the spores. GIP1 encodes a regulatory/targeting subunit of protein phosphatase type 1 that is required for sporulation. Gip1 recruits the catalytic subunit Glc7 to septin structures that form along the prospore membrane; however, the molecular basis of its localization and function is not fully understood. Here we show that Gip1 changes its localization dynamically and is required for prospore membrane extension. Gip1 first associates with the spindle pole body as the prospore membrane forms, moves onto the prospore membrane and then to the septins as the membrane extends, distributes around the prospore membrane after closure, and finally translocates into the nucleus in the maturing spore. Deletion and mutation analyses reveal distinct sequences in Gip1 that are required for different localizations and for association with Glc7. Binding to Glc7 is also required for proper localization. Strikingly, localization to the prospore membrane, but not association with septins, is important for Gip1 function. Further, our genetic analysis suggests that a Gip1–Glc7 phosphatase complex regulates prospore membrane extension in parallel to the previously reported Vps13, Spo71, Spo73 pathway.

A Novel Assay Reveals a Maturation Process during Ascospore Wall Formation

The ascospore wall of the budding yeast Saccharomyces cerevisiae consists of inner layers of similar composition to the vegetative cell wall and outer layers made of spore-specific components that confer increased stress resistance on the spore. The primary constituents of the outer spore wall are chitosan, dityrosine, and a third component termed Chi that has been identified by spectrometry but whose chemical structure is not known. The lipophilic dye monodansylpentane readily stains lipid droplets inside of newly formed ascospores but, over the course of several days, the spores become impermeable to the dye. The generation of this permeability barrier requires the chitosan layer, but not dityrosine layer, of the spore wall. Screening of a set of mutants with different outer spore wall defects reveals that impermeability to the dye requires not just the presence of chitosan, but another factor as well, possibly Chi, and suggests that the OSW2 gene product is required for synthesis of this factor. Testing of mutants that block synthesis of specific aromatic amino acids indicates that de novo synthesis of tyrosine contributes not only to formation of the dityrosine layer but to impermeability of the wall as well, suggesting a second role for aromatic amino acids in spore wall synthesis.

In vitro reconstitution of the yeast spore wall dityrosine layer discloses the mechanism of its assembly

In response to nutrient starvation, diploid cells of the budding yeast Saccharomyces cerevisiae differentiate into a dormant form of haploid cell termed a spore. The dityrosine layer forms the outermost layer of the wall of S. cerevisiae spores and endows them with resistance to environmental stresses. ll-Bisformyl dityrosine is the main constituent of the dityrosine layer, but the mechanism of its assembly remains elusive. Here, we found that ll-bisformyl dityrosine, but not ll-dityrosine, stably associated in vitro with dit1Δ spores, which lack the dityrosine layer. No other soluble cytosolic materials were required for this incorporation. In several aspects, the dityrosine incorporated in trans resembled the dityrosine layer. For example, dityrosine incorporation obscured access of the dye calcofluor white to the underlying chitosan layer, and ll-bisformyl dityrosine molecules bound to dit1Δ spores were partly isomerized to the dl-form. Mutational analyses revealed several spore wall components required for this binding. One was the chitosan layer located immediately below the dityrosine layer in the spore wall. However, ll-bisformyl dityrosine did not stably bind to chitosan particles, indicating that chitosan is not sufficient for this association. Several lines of evidence demonstrated that spore-resident proteins are involved in the incorporation, including the Lds proteins, which are localized to lipid droplets attached to the developing spore wall. In conclusion, our results provide insight into the mechanism of dityrosine layer formation, and the in vitro assay described here may be used to investigate additional mechanisms in spore wall assembly.

β-1,6-glucan synthesis-associated genes are required for proper spore wall formation in Saccharomyces cerevisiae

The yeast spore wall is an excellent model to study the assembly of an extracellular macromolecule structure. In the present study, mutants defective in β-1,6-glucan synthesis, including kre1∆, kre6∆, kre9∆ and big1∆, were sporulated to analyse the effect of β-1,6-glucan defects on the spore wall. Except for kre6∆, these mutant spores were sensitive to treatment with ether, suggesting that the mutations perturb the integrity of the spore wall. Morphologically, the mutant spores were indistinguishable from wild-type spores. They lacked significant sporulation defects partly because the chitosan layer, which covers the glucan layer, compensated for the damage. The proof for this model was obtained from the effect of the additional deletion of CHS3 that resulted in the absence of the chitosan layer. Among the double mutants, the most severe spore wall deficiency was observed in big1∆ spores. The majority of the big1∆chs3∆ mutants failed to form visible spores at a higher temperature. Given that the big1∆ mutation caused a failure to attach a GPI-anchored reporter, Cwp2-GFP, to the spore wall, β-1,6-glucan is involved in tethering of GPI-anchored proteins in the spore wall as well as in the vegetative cell wall. Thus, β-1,6-glucan is required for proper organization of the spore wall. Copyright © 2017 John Wiley & Sons, Ltd.

Evidence for ESCRT- and clathrin-dependent microautophagy

Microautophagy is a mode of autophagy in which the lysosomal or vacuolar membrane invaginates and engulfs target components. Oku et al. show that, upon a diauxic shift, yeast microautophagy involves recruitment of ESCRT proteins to the vacuolar membrane, including clathrin-interacting Vps27, and uptake of lipid droplets by the vacuole.

Microautophagy refers to a mode of autophagy in which the lysosomal or vacuolar membrane invaginates and directly engulfs target components. The molecular machinery of membrane dynamics driving microautophagy is still elusive. Using immunochemical monitoring of yeast vacuolar transmembrane proteins, Vph1 and Pho8, fused to fluorescent proteins, we obtained evidence showing an induction of microautophagy after a diauxic shift in the yeast Saccharomyces cerevisiae. Components of the endosomal sorting complex required for transport machinery were found to be required for this process, and the gateway protein of the machinery, Vps27, was observed to change its localization onto the vacuolar membrane after a diauxic shift. We revealed the functional importance of Vps27’s interaction with clathrin in this microautophagy that also contributed to uptake of lipid droplets into the vacuole. This study sheds light on the molecular mechanism of microautophagy, which does not require the core Atg proteins.

Production of encapsulated creatinase using yeast spores

Yeast spores can be used as a carrier to produce enzyme capsules. In the present study, this technique was applied to a diagnostic enzyme named creatinase. We found that a secretory form of Pseudomonas putida creatinase could be entrapped in the spore wall, and such spores were used as creatinase capsules. The activity of the encapsulated creatinase was largely improved by mild spore wall defective mutations, such as DIT1 or OSW2 deletions. The advantages of this method include the following: encapsulated and freeze-dried creatinase is produced without preparing the purified enzyme, and it exhibits resistance to environmental stresses, such as high temperature and SDS treatments. Thus, yeast spores could be applied to establish quick and easy clinical diagnostic methods.

Whole-genome de novo sequencing, combined with RNA-Seq analysis, reveals unique genome and physiological features of the amylolytic yeast Saccharomycopsis fibuligera and its interspecies hybrid

BACKGROUND

Genomic studies on fungal species with hydrolytic activity have gained increased attention due to their great biotechnological potential for biomass-based biofuel production. The amylolytic yeast Saccharomycopsis fibuligera has served as a good source of enzymes and genes involved in saccharification. Despite its long history of use in food fermentation and bioethanol production, very little is known about the basic physiology and genomic features of S. fibuligera.

RESULTS

We performed whole-genome (WG) de novo sequencing and complete assembly of S. fibuligera KJJ81 and KPH12, two isolates from wheat-based Nuruk in Korea. Intriguingly, the KJJ81 genome (~38 Mb) was revealed as a hybrid between the KPH12 genome (~18 Mb) and another unidentified genome sharing 88.1% nucleotide identity with the KPH12 genome. The seven chromosome pairs of KJJ81 subgenomes exhibit highly conserved synteny, indicating a very recent hybridization event. The phylogeny inferred from WG comparisons showed an early divergence of S. fibuligera before the separation of the CTG and Saccharomycetaceae clades in the subphylum Saccharomycotina. Reconstructed carbon and sulfur metabolic pathways, coupled with RNA-Seq analysis, suggested a marginal Crabtree effect under high glucose and activation of sulfur metabolism toward methionine biosynthesis under sulfur limitation in this yeast. Notably, the lack of sulfate assimilation genes in the S. fibuligera genome reflects a unique phenotype for Saccharomycopsis clades as natural sulfur auxotrophs. Extended gene families, including novel genes involved in saccharification and proteolysis, were identified. Moreover, comparative genome analysis of S. fibuligera ATCC 36309, an isolate from chalky rye bread in Germany, revealed that an interchromosomal translocation occurred in the KPH12 genome before the generation of the KJJ81 hybrid genome.

CONCLUSIONS

The completely sequenced S. fibuligera genome with high-quality annotation and RNA-Seq analysis establishes an important foundation for functional inference of S. fibuligera in the degradation of fermentation mash. The gene inventory facilitates the discovery of new genes applicable to the production of novel valuable enzymes and chemicals. Moreover, as the first gapless genome assembly in the genus Saccharomycopsis including members with desirable traits for bioconversion, the unique genomic features of S. fibuligera and its hybrid will provide in-depth insights into fungal genome dynamics as evolutionary adaptation.

Examination and Disruption of the Yeast Cell Wall

The cell wall of Saccharomyces cerevisiae is a complicated extracellular organelle. Although the barrier may seem like a technical nuisance for researchers studying intracellular biomolecules or conditions, the rigid wall is an essential aspect of the yeast cell. Without it, yeast cells are unable to proliferate or carry out their life cycle. The chemical composition of the cell wall and the biosynthetic pathways and signal transduction mechanisms involved in cell wall remodeling have been studied extensively, but many unanswered questions remain. This introduction describes techniques for investigating abnormalities in the cell and spore walls and performing cell wall disruption.

Chitosan Mediates Germling Adhesion in Magnaporthe oryzae and Is Required for Surface Sensing and Germling Morphogenesis

The fungal cell wall not only plays a critical role in maintaining cellular integrity, but also forms the interface between fungi and their environment. The composition of the cell wall can therefore influence the interactions of fungi with their physical and biological environments. Chitin, one of the main polysaccharide components of the wall, can be chemically modified by deacetylation. This reaction is catalyzed by a family of enzymes known as chitin deacetylases (CDAs), and results in the formation of chitosan, a polymer of β1,4-glucosamine. Chitosan has previously been shown to accumulate in the cell wall of infection structures in phytopathogenic fungi. Here, it has long been hypothesized to act as a 'stealth' molecule, necessary for full pathogenesis. In this study, we used the crop pathogen and model organism Magnaporthe oryzae to test this hypothesis. We first confirmed that chitosan localizes to the germ tube and appressorium, then deleted CDA genes on the basis of their elevated transcript levels during appressorium differentiation. Germlings of the deletion strains showed loss of chitin deacetylation, and were compromised in their ability to adhere and form appressoria on artificial hydrophobic surfaces. Surprisingly, the addition of exogenous chitosan fully restored germling adhesion and appressorium development. Despite the lack of appressorium development on artificial surfaces, pathogenicity was unaffected in the mutant strains. Further analyses demonstrated that cuticular waxes are sufficient to over-ride the requirement for chitosan during appressorium development on the plant surface. Thus, chitosan does not have a role as a 'stealth' molecule, but instead mediates the adhesion of germlings to surfaces, thereby allowing the perception of the physical stimuli necessary to promote appressorium development. This study thus reveals a novel role for chitosan in phytopathogenic fungi, and gives further insight into the mechanisms governing appressorium development in M.oryzae.

Magnaporthe oryzae is a filamentous fungal pathogen which causes devastating crop losses in rice. Successful invasion of the host is dependent upon the ability of the fungus to remain undetected by the innate immune system of the plant, which recognizes conserved components of the fungal cell wall, such as chitin. Previous studies have demonstrated that infection-related changes in cell wall composition are necessary to allow the fungus to remain undetected during infection. One such change that has long been hypothesized to have a role as a 'stealth mechanism' is the deacetylation of the polysaccharide chitin by enzymes known as chitin deacetylases. The deacetylation of chitin produces a polysaccharide known as chitosan, which has previously been shown to accumulate specifically on infection structures in plant pathogenic fungi. However, in this study, we show that germling-localized chitosan is not required for pathogenicity, arguing against a role as a 'stealth mechanism' at this stage. Instead, chitosan is required for the development of the appressorium, a critical fungal infection structure required for the penetration of plant cells. This requirement can be attributed to chitosan mediating the adhesion of germlings to surfaces, which is required for the perception of physical stimuli.

Bacteria may induce the secretion of mucin-like proteins by the diatom Phaeodactylum tricornutum

Benthic diatoms live in photoautotrophic/heterotrophic biofilm communities embedded in a matrix of secreted extracellular polymeric substances. Closely associated bacteria influence their growth, aggregation, and secretion of exopolymers. We have studied a diatom/bacteria model community, in which a marine Roseobacter strain is able to grow with secreted diatom exopolymers as a sole source of carbon. The strain influences the aggregation of Phaeodactylum tricornutum by inducing a morphotypic transition from planktonic, fusiform cells to benthic, oval cells. Analysis of the extracellular soluble proteome of P. tricornutum in the presence and absence of bacteria revealed constitutively expressed newly identified proteins with mucin-like domains that appear to be typical for extracellular diatom proteins. In contrast to mucins, the proline-, serine-, threonine-rich (PST) domains in these proteins were also found in combination with protease-, glucosidase- and leucine-rich repeat-domains. Bioinformatic functional predictions indicate that several of these newly identified diatom-specific proteins may be involved in algal defense, intercellular signaling, and aggregation.

Assembly, molecular organization, and membrane-binding properties of development-specific septins

Septin complexes display remarkable plasticity in subunit composition, yet how a new subunit assembled into higher-order structures confers different functions is not fully understood. Here, this question is addressed in budding yeast, where during meiosis Spr3 and Spr28 replace the mitotic septin subunits Cdc12 and Cdc11 (and Shs1), respectively. In vitro, the sole stable complex that contains both meiosis-specific septins is a linear Spr28-Spr3-Cdc3-Cdc10-Cdc10-Cdc3-Spr3-Spr28 hetero-octamer. Only coexpressed Spr3 and Spr28 colocalize with Cdc3 and Cdc10 in mitotic cells, indicating that incorporation requires a Spr28-Spr3 protomer. Unlike their mitotic counterparts, Spr28-Spr3-capped rods are unable to form higher-order structures in solution but assemble to form long paired filaments on lipid monolayers containing phosphatidylinositol-4,5-bisphosphate, mimicking presence of this phosphoinositide in the prospore membrane. Spr28 and Spr3 fail to rescue the lethality of a cdc11Δ cdc12Δ mutant, and Cdc11 and Cdc12 fail to restore sporulation proficiency to spr3Δ/spr3Δ spr28Δ/spr28Δ diploids. Thus, specific meiotic and mitotic subunits endow septin complexes with functionally distinct properties.

Roles of septins in prospore membrane morphogenesis and spore wall assembly in Saccharomyces cerevisiae

In mitotically dividing cells, septin proteins form cytoskeletal filaments that function in cell morphogenesis and division. Gametogenesis in yeast couples meiosis with a fundamentally different form of cytokinesis involving de novo membrane synthesis. Budding yeast septins are critical for spore membrane extension and wall assembly.

The highly conserved family of septin proteins has important functions in cytokinesis in mitotically proliferating cells. A different form of cytokinesis occurs during gametogenesis in Saccharomyces cerevisiae, in which four haploid meiotic products become encased by prospore membrane (PSMs) and specialized, stress-resistant spore walls. Septins are known to localize in a series of structures near the growing PSM, but previous studies noted only mild sporulation defects upon septin mutation. We report that directed PSM extension fails in many septin-mutant cells, and, for those that do succeed, walls are abnormal, leading to increased susceptibility to heating, freezing, and digestion by the Drosophila gut. Septin mutants mislocalize the leading-edge protein (LEP) complex required for normal PSM and wall biogenesis, and ectopic expression of the LEP protein Ssp1 perturbs mitotic septin localization and function, suggesting a functional interaction. Strikingly, extra copies of septin CDC10 rescue sporulation and LEP localization in cells lacking Sma1, a phospholipase D–associated protein dispensable for initiation of PSM assembly and PSM curvature but required for PSM extension. These findings point to key septin functions in directing efficient membrane and cell wall synthesis during budding yeast gametogenesis.

Transcriptome structure variability in Saccharomyces cerevisiae strains determined with a newly developed assembly software

Background

RNA-seq studies have an important role for both large-scale analysis of gene expression and for transcriptome reconstruction. However, the lack of software specifically developed for the analysis of the transcriptome structure in lower eukaryotes, has so far limited the comparative studies among different species and strains.

Results

In order to fill this gap, an innovative software called ORA (Overlapped Reads Assembler) was developed. This software allows a simple and reliable analysis of the transcriptome structure in organisms with a low number of introns. It can also determine the size and the position of the untranslated regions (UTR) and of polycistronic transcripts. As a case study, we analyzed the transcriptional landscape of six S. cerevisiae strains in two different key steps of the fermentation process. This comparative analysis revealed differences in the UTR regions of transcripts. By extending the transcriptome analysis to yeast species belonging to the Saccharomyces genus, it was possible to examine the conservation level of unknown non-coding RNAs and their putative functional role.

Conclusions

By comparing the results obtained using ORA with previous studies and with the transcriptome structure determined with other software, it was proven that ORA has a remarkable reliability. The results obtained from the training set made it possible to detect the presence of transcripts with variable UTRs between S. cerevisiae strains. Finally, we propose a regulatory role for some non-coding transcripts conserved within the Saccharomyces genus and localized in the antisense strand to genes involved in meiosis and cell wall biosynthesis.

Electronic supplementary material

The online version of this article (doi:10.1186/1471-2164-15-1045) contains supplementary material, which is available to authorized users.

The GCKIII kinase Sps1 and the 14-3-3 isoforms, Bmh1 and Bmh2, cooperate to ensure proper sporulation in Saccharomyces cerevisiae

Sporulation in the budding yeast Saccharomyces cerevisiae is a developmental program initiated in response to nutritional deprivation. Sps1, a serine/threonine kinase, is required for sporulation, but relatively little is known about the molecular mechanisms through which it regulates this process. Here we show that SPS1 encodes a bona-fide member of the GCKIII subfamily of STE20 kinases, both through phylogenetic analysis of the kinase domain and examination of its C-terminal regulatory domain. Within the regulatory domain, we find Sps1 contains an invariant ExxxPG region conserved from plant to human GCKIIIs that we call the EPG motif; we show this EPG motif is important for SPS1 function. We also find that Sps1 is phosphorylated near its N-terminus on Threonine 12, and that this phosphorylation is required for the efficient production of spores. In Sps1, Threonine 12 lies within a 14-3-3 consensus binding sequence, and we show that the S. cerevisiae 14-3-3 proteins Bmh1 and Bmh2 bind Sps1 in a Threonine 12-dependent fashion. This interaction is significant, as BMH1 and BMH2 are required during sporulation and genetically interact with SPS1 in sporulating cells. Finally, we observe that Sps1, Bmh1 and Bmh2 are present in both the nucleus and cytoplasm during sporulation. We identify a nuclear localization sequence in Sps1 at amino acids 411-415, and show that this sequence is necessary and sufficient for nuclear localization. Taken together, these data identify regions within Sps1 critical for its function and indicate that SPS1 and 14-3-3s act together to promote proper sporulation in S. cerevisiae.

SPO24 is a transcriptionally dynamic, small ORF-encoding locus required for efficient sporulation in Saccharomyces cerevisiae

In Saccharomyces cerevisiae, meiosis and sporulation are highly regulated responses that are driven in part by changes in RNA expression. Alternative mRNA forms with extended 5′ UTRs are atypical in S. cerevisiae, and 5′ extensions with upstream open reading frames (uORFs) are even more unusual. Here we characterize the gene YPR036W-A, now renamed SPO24, which encodes a very small (67-amino-acid) protein. This gene gives rise to two mRNA forms: a shorter form throughout meiosis and a longer, 5′-extended form in mid-late meiosis. The latter form includes a uORF for a 14-amino-acid peptide (Spo24^u14). Deletion of the downstream ORF (dORF) leads to sporulation defects and the appearance of pseudohyphae-like projections. Experiments with luciferase reporters indicate that the uORF does not downregulate dORF translation. The protein encoded by the dORF (Spo24^d67) localizes to the prospore membrane and is differentially phosphorylated during meiosis. Transcription of the 5′-extended mRNA in mid-meiosis depends upon the presence of two middle sporulation elements (MSEs). Removal of the MSEs severely inhibits the mid-meiotic appearance of the 5′-extended mRNA and limits the ability of plasmid-borne SPO24 to rescue the sporulation defect of a spo24Δ mutant, suggesting that the 5′-extended mRNA is functionally important. These results reveal Spo24^d67 as a sporulation-related factor that is encoded by a transcriptionally dynamic, uORF-containing locus.

Use of yeast spores for microencapsulation of enzymes

Here, we report a novel method to produce microencapsulated enzymes using Saccharomyces cerevisiae spores. In sporulating cells, soluble secreted proteins are transported to the spore wall. Previous work has shown that the spore wall is capable of retaining soluble proteins because its outer layers work as a diffusion barrier. Accordingly, a red fluorescent protein (RFP) fusion of the α-galactosidase, Mel1, expressed in spores was observed in the spore wall even after spores were subjected to a high-salt wash in the presence of detergent. In vegetative cells, however, the cell wall cannot retain the RFP fusion. Although the spore wall prevents diffusion of proteins, it is likely that smaller molecules, such as sugars, pass through it. In fact, spores can contain much higher α-galactosidase activity to digest melibiose than vegetative cells. When present in the spore wall, the enzyme acquires resistance to environmental stresses including enzymatic digestion and high temperatures. The outer layers of the spore wall are required to retain enzymes but also decrease accessibility of the substrates. However, mutants with mild spore wall defects can retain and stabilize the enzyme while still permitting access to the substrate. In addition to Mel1, we also show that spores can retain the invertase. Interestingly the encapsulated invertase has significantly lower activity toward raffinose than toward sucrose.This suggests that substrate selectivity could be altered by the encapsulation.

Applied usage of yeast spores as chitosan beads

In this study, we present a nonhazardous biological method of producing chitosan beads using the budding yeast Saccharomyces cerevisiae. Yeast cells cultured under conditions of nutritional starvation cease vegetative growth and instead form spores. The spore wall has a multilaminar structure with the chitosan layer as the second outermost layer. Thus, removal of the outermost dityrosine layer by disruption of the DIT1 gene, which is required for dityrosine synthesis, leads to exposure of the chitosan layer at the spore surface. In this way, spores can be made to resemble chitosan beads. Chitosan has adsorptive features and can be used to remove heavy metals and negatively charged molecules from solution. Consistent with this practical application, we find that spores are capable of adsorbing heavy metals such as Cu(2+), Cr(3+), and Cd(2+), and removal of the dityrosine layer further improves the adsorption. Removal of the chitosan layer decreases the adsorption, indicating that chitosan works as an adsorbent in the spores. Besides heavy metals, spores can also adsorb a negatively charged cholesterol derivative, taurocholic acid. Furthermore, chitosan is amenable to chemical modifications, and, consistent with this property, dit1Δ spores can serve as a carrier for immobilization of enzymes. Given that yeast spores are a natural product, our results demonstrate that they, and especially dit1Δ mutants, can be used as chitosan beads and used for multiple purposes.

A highly redundant gene network controls assembly of the outer spore wall in S. cerevisiae

The spore wall of Saccharomyces cerevisiae is a multilaminar extracellular structure that is formed de novo in the course of sporulation. The outer layers of the spore wall provide spores with resistance to a wide variety of environmental stresses. The major components of the outer spore wall are the polysaccharide chitosan and a polymer formed from the di-amino acid dityrosine. Though the synthesis and export pathways for dityrosine have been described, genes directly involved in dityrosine polymerization and incorporation into the spore wall have not been identified. A synthetic gene array approach to identify new genes involved in outer spore wall synthesis revealed an interconnected network influencing dityrosine assembly. This network is highly redundant both for genes of different activities that compensate for the loss of each other and for related genes of overlapping activity. Several of the genes in this network have paralogs in the yeast genome and deletion of entire paralog sets is sufficient to severely reduce dityrosine fluorescence. Solid-state NMR analysis of partially purified outer spore walls identifies a novel component in spore walls from wild type that is absent in some of the paralog set mutants. Localization of gene products identified in the screen reveals an unexpected role for lipid droplets in outer spore wall formation.

The cell wall of fungi is a complex extracellular matrix and an important target for antifungal drugs. Assembly of the wall during spore formation in baker's yeast is a useful model for fungal wall development. The outermost layers of the spore wall are composed of a polymer of dityrosine connected to an underlying polysaccharide layer. The assembly pathway of this dityrosine polymer is not known. Using a genetic approach we reveal a network of genes that function redundantly to control dityrosine layer synthesis. Solid state NMR analysis of spore walls from wild-type and mutant cells reveals a novel constituent of the spore wall that may link the dityrosine to the underlying polysaccharides and a role for lipid droplets in the incorporation of this new component into the spore wall.

Molecules to modeling: Toxoplasma gondii oocysts at the human-animal-environment interface

Environmental transmission of extremely resistant Toxoplasma gondii oocysts has resulted in infection of diverse species around the world, leading to severe disease and deaths in human and animal populations. This review explores T. gondii oocyst shedding, survival, and transmission, emphasizing the importance of linking laboratory and landscape from molecular characterization of oocysts to watershed-level models of oocyst loading and transport in terrestrial and aquatic systems. Building on discipline-specific studies, a One Health approach incorporating tools and perspectives from diverse fields and stakeholders has contributed to an advanced understanding of T. gondii and is addressing transmission at the rapidly changing human-animal-environment interface.

A world of cytochrome P450s

The world we live in is a biosphere influenced by all organisms who inhabit it. It is also an ecology of genes, with some having rather startling effects. The premise put forth in this issue is cytochrome P450 is a significant player in the world around us. Life and the Earth itself would be visibly different and diminished without cytochrome P450s. The contributions to this issue range from evolution on the billion year scale to the colour of roses, from Darwin to Rachel Carson; all as seen through the lens of cytochrome P450.

A network involving Rho-type GTPases, a paxillin and a formin homologue regulates spore length and spore wall integrity in the filamentous fungus Ashbya gossypii

Fungi produce spores that allow for their dispersal and survival under harsh environmental conditions. These spores can have an astonishing variety of shapes and sizes. Using the highly polar, needle-shaped spores of the ascomycete Ashbya gossypii as a model, we demonstrated that spores produced by this organism are not simple continuous structures but rather consist of three different segments that correlate with the accumulation of different materials: a rigid tip segment, a more fragile main spore-compartment and a solid tail segment. Little is currently known about the regulatory mechanisms that control the formation of the characteristic spore morphologies. We tested a variety of mutant strains for their spore phenotypes, including spore size, shape and wall defects. The mutants that we identified as displaying such phenotypes are all known for their roles in the regulation of hyphal tip growth, including the formin protein AgBni1, the homologous Rho-type GTPases AgRho1a and AgRho1b and the scaffold protein AgPxl1. Our observations suggest that these proteins form a signalling network controlling spore length by regulating the formation of actin structures.

Sporulation in the budding yeast Saccharomyces cerevisiae

In response to nitrogen starvation in the presence of a poor carbon source, diploid cells of the yeast Saccharomyces cerevisiae undergo meiosis and package the haploid nuclei produced in meiosis into spores. The formation of spores requires an unusual cell division event in which daughter cells are formed within the cytoplasm of the mother cell. This process involves the de novo generation of two different cellular structures: novel membrane compartments within the cell cytoplasm that give rise to the spore plasma membrane and an extensive spore wall that protects the spore from environmental insults. This article summarizes what is known about the molecular mechanisms controlling spore assembly with particular attention to how constitutive cellular functions are modified to create novel behaviors during this developmental process. Key regulatory points on the sporulation pathway are also discussed as well as the possible role of sporulation in the natural ecology of S. cerevisiae.

Environmental and genetic determinants of colony morphology in yeast

Nutrient stresses trigger a variety of developmental switches in the budding yeast Saccharomyces cerevisiae. One of the least understood of such responses is the development of complex colony morphology, characterized by intricate, organized, and strain-specific patterns of colony growth and architecture. The genetic bases of this phenotype and the key environmental signals involved in its induction have heretofore remained poorly understood. By surveying multiple strain backgrounds and a large number of growth conditions, we show that limitation for fermentable carbon sources coupled with a rich nitrogen source is the primary trigger for the colony morphology response in budding yeast. Using knockout mutants and transposon-mediated mutagenesis, we demonstrate that two key signaling networks regulating this response are the filamentous growth MAP kinase cascade and the Ras-cAMP-PKA pathway. We further show synergistic epistasis between Rim15, a kinase involved in integration of nutrient signals, and other genes in these pathways. Ploidy, mating-type, and genotype-by-environment interactions also appear to play a role in the controlling colony morphology. Our study highlights the high degree of network reuse in this model eukaryote; yeast use the same core signaling pathways in multiple contexts to integrate information about environmental and physiological states and generate diverse developmental outputs.