Catalytic mechanism of cellulose degradation by a cellobiohydrolase, CelS

Immobilization of Cellulase Enzymes on Single-Walled Carbon Nanotubes for Recycling of Enzymes and Better Yield of Bioethanol Using Computer Simulations

The utilization of microbial cellulase enzymes for transforming plant biomass into biofuel or bioethanol, which can serve as a substitute for fossil fuel, is a subject of growing interest. Nonetheless, large-scale production of biofuel using cellulases is not economically feasible as the extraction of these enzymes from diverse microorganisms is an expensive process. To address this issue, immobilizing the enzyme to a substrate material, e.g., carbon nanotubes (CNTs), to recycle without a significant decline in its catalytic activity is a promising solution. Due to the hydrophobic nature of CNTs, we employed molecular docking and network analysis methodologies to identify potential CNT-binding sites on the outer surface of a wild-type cellulase enzyme, CelS. Classical molecular dynamics simulations of CNT-bound CelS through one of the selected binding sites resulted in negligible changes in the secondary structure of the enzyme and its catalytic domain, implying the least possible effect on the catalytic activity post-immobilization. Furthermore, our study reveals that while the unfolding near the CNT-binding region in CelS is more pronounced when the enzyme is interacting with a wider CNT, resulting in enhanced contact area and improved binding affinity, its impact on the overall CelS structure is relatively less significant when compared to thinner CNTs. Particularly, CNTs of diameter ∼12 Å can serve as a favorable option for substrate materials in cellulase immobilization. Our study also provides critical insights into the binding mechanisms between cellulase and CNTs, which could lead to the development of more efficient biocatalysts for biofuel production.

Mechanism of Chiral-Selective Aminoacylation of an RNA Minihelix Explored by QM/MM Free-Energy Simulations

Aminoacylation of a primordial RNA minihelix composed of D-ribose shows L-amino acid preference over D-amino acid without any ribozymes or enzymes. This preference in the amino acylation reaction likely plays an important role in the establishment of homochirality in L-amino acid in modern proteins. However, molecular mechanisms of the chiral selective reaction remain unsolved mainly because of difficulty in direct observation of the reaction at the molecular scale by experiments. For seeking a possible mechanism of the chiral selectivity, quantum mechanics/molecular mechanics (QM/MM) umbrella sampling molecular dynamics (MD) simulations of the aminoacylation reactions in a modeled RNA were performed to investigate differences in their free-energy profiles along the reactions for L- and D-alanine and its physicochemical origin. The reaction is initiated by approaching a 3′-oxygen of the RNA minihelix to the carbonyl carbon of an aminoacyl phosphate oligonucleotide. The QM/MM umbrella sampling MD calculations showed that the height of the free-energy barrier for L-alanine aminoacylation reaction was 17 kcal/mol, which was 9 kcal/mol lower than that for the D-alanine system. At the transition state, the distance between the negatively charged 3′-oxygen and the positively charged amino group of L-alanine was shorter than that of D-alanine, which was caused by the chirality difference of the amino acid. These results indicate that the transition state for L-alanine is more electrostatically stabilized than that for D-alanine, which would be a plausible mechanism previously unexplained for chiral selectivity in the RNA minihelix aminoacylation.

CelS-Catalyzed Processive Cellulose Degradation and Cellobiose Extraction for the Production of Bioethanol

Bacterial cellulase enzymes are potent candidates for the efficient production of bioethanol, a promising alternative to fossil fuels, from cellulosic biomass. These enzymes catalyze the breakdown of cellulose in plant biomass into simple sugars and then to bioethanol. In the absence of the enzyme, the cellulosic biomass is recalcitrant to decomposition due to fermentation-resistant lignin and pectin coatings on the cellulose surface, which make them inaccessible for hydrolysis. Cellobiohydrolase CelS is a microbial enzyme that binds to cellulose fiber and efficiently cleaves it into a simple sugar (cellobiose) by a repeated processive chopping mechanism. The two contributing factors to the catalytic reaction rate and the yield of cellobiose are the efficient product expulsion from the product binding site of CelS and the movement of the substrate or cellulose chain into the active site. Despite progress in understanding product expulsion in other cellulases, much remains to be understood about the molecular mechanism of processive action of these enzymes. Here, nonequilibrium molecular dynamics simulations using suitable reaction coordinates are carried out to investigate the energetics and mechanism of the substrate dynamics and product expulsion in CelS. The calculated free energy barrier for the product expulsion is three times lower than that for the processive action indicating that product removal is relatively easier and faster than the sliding of the substrate to the catalytic active site. The water traffic near the active site in response to the product expulsion and the processive action is also explored.

Enhanced Activity by Genetic Complementarity: Heterologous Secretion of Clostridial Cellulases by Bacillus licheniformis and Bacillus velezensis

To adapt to various ecological niches, the members of genus Bacillus display a wide spectrum of glycoside hydrolases (GH) responsible for the hydrolysis of cellulose and lignocellulose. Being abundant and renewable, cellulose-containing plant biomass may be applied as a substrate in second-generation biotechnologies for the production of platform chemicals. The present study aims to enhance the natural cellulase activity of two promising 2,3-butanediol (2,3-BD) producers, Bacillus licheniformis 24 and B. velezensis 5RB, by cloning and heterologous expression of cel8A and cel48S genes of Acetivibrio thermocellus. In B. licheniformis, the endocellulase Cel8A (GH8) was cloned to supplement the action of CelA (GH9), while in B. velezensis, the cellobiohydrolase Cel48S (GH48) successfully complemented the activity of endo-cellulase EglS (GH5). The expression of the natural and heterologous cellulase genes in both hosts was demonstrated by reverse-transcription PCR. The secretion of clostridial cellulases was additionally enhanced by enzyme fusion to the subtilisin-like signal peptide, reaching a significant increase in the cellulase activity of the cell-free supernatants. The results presented are the first to reveal the possibility of genetic complementation for enhancement of cellulase activity in bacilli, thus opening the prospect for genetic improvement of strains with an important biotechnological application.

Current Status of Carbohydrates Information in the Protein Data Bank

Carbohydrates are well known for their physicochemical, biological, functional, and therapeutic characteristics. Unfortunately, their chemical nature imposes severe challenges for the structural elucidation of these phenomena, impairing not only the depth of our understanding of carbohydrates but also the development of new biotechnological and therapeutic applications based on these molecules. In the recent past, the amount of structural information, obtained mainly from X-ray crystallography, has increased progressively, as well as its quality. In this context, the current work presents a global analysis of the carbohydrate information available in the Protein Data Bank (PDB). From high quality structures, it is clear that most of the data are highly concentrated on a few sets of residue types, on their monosaccharidic forms, and connected by a small diversity of glycosidic linkages. The geometries of these linkages can be mostly associated with the types of linkages instead of residues, while the level of puckering distortion was characterized, quantified, and located in a pseudorotational equilibrium landscape, not only to local minima but also to transitional states. These qualitative and quantitative analyses offer a global picture of the carbohydrate structural content in the PDB, potentially supporting the building of new models for carbohydrate-related biological phenomena at the atomistic level, including new developments on force field parameters.

Exosomes in the phloem and xylem of woody plants

Exosomes in the secondary phloem and secondary xylem of angiosperms and gymnosperms have physiological roles in the storage and transport of endoglucanases. Knowledge of plant extracellular vesicles (EVs) is limited by their presence in the apoplastic fluid of seeds and leaves. The contents of plant EVs and their biological functions are unclear. The aim of the present study was to expand our knowledge of EVs in woody plants. Sample splits were prepared from branch and stem samples from angiosperms and gymnosperms after cryomechanical destruction with liquid nitrogen. The study methods included scanning electron (SEM), atomic force microscopy (AFM), endoglucanase activity measurement. EVs visualized on the internal layers of the cell walls proved to be exosomes according to their diameter (65-145 nm). SEM revealed cup-shaped structures characteristic of exosomes in a dry state. Plant exosomes in the form of globules in the native state were visualized for the first time by AFM. Exosomes were present both in the active and dormant cambium. Erosion zones were observed at the sites of exosome localization. The activity of endo-1,4-β-glucanase was detected in Picea xylem, while the RNA level was very low, suggesting that endo-1,4-β-glucanases were preserved in the exosomes. There are grounds to assert that endo-1,4-β-glucanases delivered by exosomes participated in pit cavity formation in the S₁ layer of xylary fibres. A possible mechanism of endo-1,4-β-glucanase action in the biosynthesis of the secondary wall is proposed. These results demonstrate that the physiological role of the exosomes in the phloem and xylem is the storage and transport of endo-1,4-β-glucanases participating in cell wall remodeling in woody plants. Present study expands our knowledge about plant exosomes.

Binding Process and Free Energy Characteristics of Cellulose Chain into the Catalytic Domain of Cellobiohydrolase TrCel7A

It was observed in experiments that the catalytic domain (CD) of Trichoderma reesei Cel7A (TrCel7A) hydrolyzes crystalline cellulose in a processive manner, but the underlying binding mechanism is still unknown. Here, through replica-exchange molecular dynamics simulations, we find that the loading and sucking-in process of the cellulose chain into CD is entropy-driven and enthalpy-unfavorable, which firmly relate to the desolvation of the binding channel of CD. During the loading process, hydrophobic interactions play a dominant role because several aromatic residues have been identified to guide the cellulose chain processing. At the active site, a transition from enthalpy- to entropy-driven is detected for the driving force. Such a finding reveals the indispensability of the catalytic reaction of the glycosidic bond to provide the energy to drive the movements of the cellulose chain. Our study reveals the interaction pictures between the cellulose chain and TrCel7A at the atomic level, which helps better understand the catalytic mechanism of TrCel7A.

Inducing effects of cellulosic hydrolysate components of lignocellulose on cellulosome synthesis in Clostridium thermocellum

Cellulosome is a highly efficient supramolecular machine for lignocellulose degradation, and its substrate‐coupled regulation requires soluble transmembrane signals. However, the inducers for cellulosome synthesis and the inducing effect have not been clarified quantitatively. Values of cellulosome production capacity (CPC) and estimated specific activity (eSA) were calculated based on the primary scaffoldin ScaA to define the stimulating effects on the cellulosome synthesis in terms of quantity and quality respectively. The estimated cellulosome production of Clostridium thermocellum on glucose was at a low housekeeping level. Both Avicel and cellobiose increased CPCs of the cells instead of the eSAs of the cellulosome. The CPC of Avicel‐grown cells was over 20‐fold of that of glucose‐grown cells, while both Avicel‐ and glucose‐derived cellulosomes showed similar eSA. The CPC of cellobiose‐grown cells was also over three times higher than glucose‐grown cells, but the eSA of cellobiose‐derived cellulosome was 16% lower than that of the glucose‐derived cellulosome. Our results indicated that cello‐oligosaccharides played the key roles in inducing the synthesis of the cellulosome, but non‐cellulosic polysaccharides showed no inducing effects.

Nanoscale Engineering of Designer Cellulosomes

Biocatalysts showcase the upper limit obtainable for high-speed molecular processing and transformation. Efforts to engineer functionality in synthetic nanostructured materials are guided by the increasing knowledge of evolving architectures, which enable controlled molecular motion and precise molecular recognition. The cellulosome is a biological nanomachine, which, as a fundamental component of the plant-digestion machinery from bacterial cells, has a key potential role in the successful development of environmentally-friendly processes to produce biofuels and fine chemicals from the breakdown of biomass waste. Here, the progress toward so-called "designer cellulosomes", which provide an elegant alternative to enzyme cocktails for lignocellulose breakdown, is reviewed. Particular attention is paid to rational design via computational modeling coupled with nanoscale characterization and engineering tools. Remaining challenges and potential routes to industrial application are put forward.

Air Oxidation of Activated Carbon to Synthesize a Biomimetic Catalyst for Hydrolysis of Cellulose

Oxygenated carbon catalyzes the hydrolysis of cellulose present in lignocellulosic biomass by utilizing the weakly acidic functional groups on its surface. Here we report the synthesis of a biomimetic carbon catalyst by simple and economical air-oxidation of a commercially available activated carbon. Air- oxidation at 450-500 °C introduced 2000-2400 μmol g(-1) of oxygenated functional groups on the material with minor changes in the textural properties. Selectivity towards the formation of carboxylic groups on the catalyst surface increased with the increase in oxidation temperature. The degree of oxidation on carbon catalyst was found to be proportional to its activity for hydrolysis of cellulose. The hydrolysis of eucalyptus in the presence of carbon oxidized at 475 °C afforded glucose yield of 77 % and xylose yield of 67 %.

Secretome analysis of Pleurotus eryngii reveals enzymatic composition for ramie stalk degradation

Pleurotus eryngii (P. eryngii) can secrete large amount of hydrolytic and oxidative enzymes to degrade lignocellulosic biomass. In spite of several researches on the individual lignolytic enzymes, a direct deconstruction of lignocellulose by enzyme mixture is not yet possible. Identifying more high-performance enzymes or enzyme complexes will lead to efficient in vitro lignocelluloses degradation. In this report, secretomic analysis was used to search for the new or interesting enzymes for lignocellulose degradation. Besides, the utilization ability of P. eryngii to ramie stalk substrate was evaluated from the degradation of cellulose, hemicellulose, and lignin in medium and six extracellular enzymes activities during different growth stages were discussed. The results showed that a high biological efficiency of 71% was obtained; cellulose, hemicelluloses, and lignin decomposition rates of P. eryngii were 29.2, 26.0, and 51.2%, respectively. Enzyme activity showed that carboxymethyl cellulase, xylanase, laccase, and peroxidase activity peaks appeared at the primordial initiation stage. In addition, we profiled a global view of the secretome of P. eryngii cultivated in ramie stalk media to understand the mechanism behind lignocellulosic biomass hydrolysis. Eighty-seven nonredundant proteins were identified and a diverse group of enzymes, including cellulases, hemicellulases, pectinase, ligninase, protease, peptidases, and phosphatase implicated in lignocellulose degradation were found. In conclusion, the information in this report will be helpful to better understand the lignocelluloses degradation mechanisms of P. eryngii.

Structures of exoglucanase from Clostridium cellulovorans: cellotetraose binding and cleavage

Exoglucanase/cellobiohydrolase (EC 3.2.1.176) hydrolyzes a β-1,4-glycosidic bond from the reducing end of cellulose and releases cellobiose as the major product. Three complex crystal structures of the glycosyl hydrolase 48 (GH48) cellobiohydrolase S (ExgS) from Clostridium cellulovorans with cellobiose, cellotetraose and triethylene glycol molecules were solved. The product cellobiose occupies subsites +1 and +2 in the open active-site cleft of the enzyme-cellotetraose complex structure, indicating an enzymatic hydrolysis function. Moreover, three triethylene glycol molecules and one pentaethylene glycol molecule are located at active-site subsites -2 to -6 in the structure of the ExgS-triethylene glycol complex shown here. Modelling of glucose into subsite -1 in the active site of the ExgS-cellobiose structure revealed that Glu50 acts as a proton donor and Asp222 plays a nucleophilic role.

Molecular Dynamics and Metadynamics Simulations of the Cellulase Cel48F

Molecular dynamics (MD) and metadynamics techniques were used to study the cellulase Cel48F-sugar. Cellulase is enzyme that breaks cellulose fibers into small sugar units and is potentially useful in second generation alcohol production. In MD simulations, the overall structure of equilibrated Cel48F did not significantly change along the trajectory, retaining root mean square deviation below 0.15 nm. A set of 15 residues interacting with the sugar chains via hydrogen bonding throughout the simulation was observed. The free energy of dissociation (ΔG_diss.) of the chains in the catalytic tunnel of Cel48F was determined by metadynamics. The ΔG_diss. values of the chains entering and leaving the wild-type Cel48F cavity were 13.9 and 62.1 kcal/mol, respectively. We also mutated the E542 and Q543 to alanine residue and obtained ΔG_diss. of 41.8 and 45.9 kcal/mol, respectively. These mutations were found to facilitate smooth dissociation of the sugar chain across the Cel48F tunnel. At the entry of the Cel48F tunnel, three residues were mutated to alanine: T110, T213, and L274. Contrary to the T110A-Cel48F, the mutants T213-Cel48F and L274-Cel48F prevented the sugar chain from passing across the leaving site. The present results can be a guideline in mutagenesis studies to improve processing by Cel48F.

Family 1 carbohydrate binding-modules enhance saccharification rates

Cellulose degrading enzymes usually have a two-domain structure consisting of a catalytic domain and a non-catalytic carbohydrate-binding module. Although it is well known the importance of those modules in cell wall degrading process, their function is not yet fully understood. Here, we analyze the cellulose-hydrolysis activity enhancement promoted by the cellobiohydrolase I carbohydrate-binding module from Trichoderma harzianum. It was cloned, expressed, purified and used in combination with either a commercial cellulase preparation, T. reesei cellobiohydrolase I or its separate catalytic domain to hydrolyze filter paper. In all cases the amount of glucose released was increased, reaching up to 30% gain when the carbohydrate-binding module was added to the reaction. We also show that this effect seems to be mediated by a decrease in the recalcitrance of the cellulosic substrate. This effect was observed both for crystalline cellulose samples which underwent incubation with the CBM prior to application of cellulases and for the ones incubated simultaneously. Our studies demonstrate that family 1 carbohydrate-binding modules are able to potentiate the enzymatic degradation of the polysaccharides and their application might contribute to diminishing the currently prohibitive costs of the lignocellulose saccharification process.

Interaction between trehalose and MTHase from Sulfolobus solfataricus studied by theoretical computation and site-directed mutagenesis

Maltooligosyltrehalose trehalohydrolase (MTHase) catalyzes the release of trehalose by cleaving the α-1,4-glucosidic linkage next to the α-1,1-linked terminal disaccharide of maltooligosyltrehalose. Computer simulation using the hydrogen bond analysis, free energy decomposition, and computational alanine scanning were employed to investigate the interaction between maltooligosyltrehalose and the enzyme. The same residues that were chosen for theoretical investigation were also studied by site-directed mutagenesis and enzyme kinetic analysis. The importance of residues determined either experimentally or computed theoretically were in good accord with each other. It was found that residues Y155, D156, and W218 of subsites -2 and -3 of the enzyme might play an important role in interacting with the ligand. The theoretically constructed structure of the enzyme-ligand complex was further validated through an ab initio quantum chemical calculation using the Gaussian09 package. The activation energy computed from this latter study was very similar to those reported in literatures for the same type of hydrolysis reactions.

Determination of the catalytic base in family 48 glycosyl hydrolases

The catalytic base in family 48 glycosyl hydrolases has not been previously established experimentally. Based on structural and modeling data published to date, we used site-directed mutagenesis and azide rescue activity assays to show definitively that the catalytic base in Thermobifida fusca Cel48A is aspartic acid 225. Of the tested mutants, only Cel48A with the D225E mutation retained partial activity on soluble and insoluble substrates. In azide rescue experiments, only the D225G mutation, in the smallest residue tested, showed an increase in activity with added azide.