A preclinical evaluation of alternative synthetic biomaterials for fascial defect repair using a rat abdominal hernia model

Coatings for Permanent Meshes Used to Enhance Healing in Abdominal Hernia Repair: A Scoping Review

INTRODUCTION

Hernia meshes are used to reduce recurrence and pain rates, but the rates are still high. This could be improved with coatings of the mesh. This scoping review aimed to provide an overview of mesh coatings used to promote healing in abdominal hernia repair and to report beneficial and unbeneficial effects.

METHODS

We included human and animal studies with abdominal hernias that were repaired with non-commercially coated meshes. We searched Pubmed, Embase, Cochrane Central, LILACS, and CNKI without language constraints.

RESULTS

Of 2933 identified studies, 58 were included: six studies had a total of 408 humans and 52 studies had 2679 animals. The median follow-up was 12 months (range 1-156), and 95% of the hernias were incisional. There were 44 different coatings which included platelet-rich plasma, mesenchymal stem cells, growth factors, vitamin E, collagen-derived products, various polysaccharides, silk proteins, chitosan, gentamycin, doxycycline, nitrofurantoin, titanium, and diamond-like carbon. Mesenchymal stem cells and platelet-rich plasma were the most researched. Mesenchymal stem cells notably reduced inflammation and foreign body reactions but did not impact other healing metrics. In contrast, platelet-rich plasma positively influenced tissue ingrowth, collagen deposition, and neovascularization and had varying effects on inflammation and foreign body reactions.

CONCLUSION

We identified 44 different mesh coatings and they showed varying results. Mesenchymal stem cells and platelet-rich plasma were the most studied, with the latter showing considerable promise in improving biomechanical properties in hernia repair. Further investigations are needed to ascertain their definitive use in humans.

A novel electrospun polylactic acid silkworm fibroin mesh for abdominal wall hernia repair

Objective

Abdominal wall hernias are common abdominal diseases, and effective hernia repair is challenging. In clinical practice, synthetic meshes are widely applied for repairing abdominal wall hernias. However, postoperative complications, such as inflammation and adhesion, are prevalent. Although biological meshes can solve this problem to a certain extent, they face the problems of heterogeneity, rapid degradation rate, ordinary mechanical properties, and high-cost. Here, a novel electrospinning mesh composed of polylactic acid and silk fibroin (PLA-SF) for repairing abdominal wall hernias was manufactured with good physical properties, biocompatibility and low production cost.

Materials and methods

FTIR and EDS were used to demonstrate that the PLA-SF mesh was successfully synthesized. The physicochemical properties of PLA-SF were detected by swelling experiments and in vitro degradation experiments. The water contact angle reflected the hydrophilicity, and the stress‒strain curve reflected the mechanical properties. A rat abdominal wall hernia model was established to observe degradation, adhesion, and inflammation in vivo. In vitro cell mesh culture experiments were used to detect cytocompatibility and search for affected biochemical pathways.

Results

The PLA-SF mesh was successfully synthesized and did not swell or degrade over time in vitro. It had a high hydrophilicity and strength. The PLA-SF mesh significantly reduced abdominal inflammation and inhibited adhesion formation in rat models. The in vitro degradation rate of the PLA-SF mesh was slower than that of tissue remodeling. Coculture experiments suggested that the PLA-SF mesh reduced the expression of inflammatory factors secreted by fibroblasts and promoted fibroblast proliferation through the TGF-β1/Smad pathway.

Conclusion

The PLA-SF mesh had excellent physicochemical properties and biocompatibility, promoted hernia repair of the rat abdominal wall, and reduced postoperative inflammation and adhesion. It is a promising mesh and has potential for clinical application.

Injectable polyisocyanide hydrogel as healing supplement for connective tissue regeneration in an abdominal wound model

In pelvic organ prolapse (POP) patients, the uterus, bladder and/or rectum descends into vagina due to weakened support tissues. High recurrence rates after POP surgery suggest an urgent need for improved surgical outcomes. Our aim is to promote connective tissue healing that results in stimulated tissue support functions by surgically applying a hydrogel functionalized with biological cues. We used known vaginal wound healing promoting factors (basic fibroblast growth factor, β-estradiol, adipose-derived stem cells) in the biomimetic and injectable polyisocyanide (PIC) hydrogel, which in itself induces regenerative vaginal fibroblast behavior. The regenerative capacity of injected PIC hydrogel, and the additional pro-regenerative effects of these bioactive factors was evaluated in abdominal wounds in rabbits. Assessment of connective tissue healing (tensile testing, histology, immunohistochemistry) revealed that injection with all PIC formulations resulted in a statistically significant stiffness and collagen increase over time, in contrast to sham. Histological evaluation indicated new tissue growth with moderate to mild immune activity at the hydrogel - tissue interface. The results suggest that PIC injection in an abdominal wound improves healing towards regaining load-bearing capacity, which encourages us to investigate application of the hydrogel in a more translational vaginal model for POP surgery in sheep.

Deformation and Durability of Soft Three-Dimensional-Printed Polycarbonate Urethane Porous Membranes for Potential Use in Pelvic Organ Prolapse

Pelvic organ prolapse (POP) is the herniation of the pelvic organs into the vaginal space, resulting in the feeling of a bulge and organ dysfunction. Treatment of POP often involves repositioning the organs using a polypropylene mesh, which has recently been found to have relatively high rates of complications. Complications have been shown to be related to stiffness mismatches between the vagina and polypropylene, and unstable knit patterns resulting in mesh deformations with mechanical loading. To overcome these limitations, we have three-dimensional (3D)-printed a porous, monofilament membrane composed of relatively soft polycarbonate-urethane (PCU) with a stable geometry. PCU was chosen for its tunable properties as it is comprised of both hard and soft segments. The bulk mechanical properties of PCU were first characterized by testing dogbone samples, demonstrating the dependence of PCU mechanical properties on its measurement environment and the effect of print pathing. The pore dimensions and load-relative elongation response of the 3D-printed PCU membranes under monotonic tensile loading were then characterized. Finally, a fatigue study was performed on the 3D-printed membrane to evaluate durability, showing a similar fatigue resistance with a commercial synthetic mesh and hence its potential as a replacement.

Using Odontoblasts Derived from Dog Endometrial Stem Cells Encapsulated in Fibrin Gel Associated with BMP-2 in a Rat Pulp-Capping Model

This study aimed to treat dental injuries by utilizing one of the most advanced tissue engineering techniques. In this study, an in vitro model was employed to investigate the proliferation and odontogenic differentiation of canine endometrial stem cells (C-EnSCs). Furthermore, the dentin regeneration potential of odontoblast like-cells (OD) derived from C-EnSCs was assessed in rats. The C-EnSCs were isolated by the enzymatic method and identified by flow cytometry. The C-EnSCs were encapsulated in fibrin gel associated with signaling factors to create the proper conditions for cell growth and differentiation. Then, the OD cells were associated with bone morphologic protein-2 (BMP-2) to promote dentin formation in vivo. The animal model used to evaluate the regenerative effect of cells and biomaterials included the preparation of the left maxillary first molar of rats for direct pulp capping operation. Animals were divided into four groups: group 1, a control group without any treatment, group 2, which received fibrin, group 3, which received fibrin with ODs (fibrin/ODs), and group 4, which received fibrin with ODs and BMP-2 (fibrin/ODs/BMP-2). The morphological observations showed the differentiation of C-EnSCs into adipose, bone, neural cells, and ODs. Furthermore, the histomorphometric data of the treated teeth showed how fibrin gel and BMP2 at a concentration of 100 ng/mL provided an optimal microenvironment for regenerating dentin tissue in rats, which was increased significantly with the presence of OD cells within eight weeks. Our study showed that using OD cells derived from C-EnSCs encapsulated in fibrin gel associated with BMP2 can potentially be an appropriate candidate for direct pulp-capping and dentin regeneration.

Evaluating tissue-engineered repair material for pelvic floor dysfunction: a comparison of in vivo response to meshes implanted in rats

INTRODUCTION AND HYPOTHESIS

Achieving better anatomic restoration and decreasing the associated complications are necessary for material repair of pelvic floor dysfunction (PFD). This study was aimed to investigate host response to tissue-engineered repair material (TERM) in rat models by comparing different materials and study the changes in biomechanical properties over time.

METHODS

TERM was constructed by seeding adipose-derived stem cells (ADSCs) on electrospun poly(L-lactide)-trimethylene carbonate-glycolide (PLTG) terpolymers. The TERM, PLTG, porcine small intestine submucosa mesh (SIS), and polypropylene (PP) (n = 6 / group per time point) were implanted in rats for 7, 30, 60, and 90 days. Hematoxylin-eosin and Masson's trichrome staining were used to assess the host response, and mechanical testing was used to evaluate the changes in biomechanical properties.

RESULTS

In vivo imaging showed that the ADSCs were confined to the abdominal wall and did not migrate to other organs or tissues. The TERM was encapsulated by a thicker layer of connective tissue and was associated with less reduced inflammatory scores compared with PLTG and PP over time. The vascularization of the TERM was greater than that with PP and PLTG over time (p < 0.05) and was greater than that with SIS on day 90. The ultimate tensile strain and Young's modulus of the PP group showed the greatest increases, and the TERM group followed on day 90.

CONCLUSIONS

This TERM achieved better host integration in rat models and better biomechanical properties, and it may be an alternative material for PFD.

Endometrial SUSD2+ Mesenchymal Stem/Stromal Cells in Tissue Engineering: Advances in Novel Cellular Constructs for Pelvic Organ Prolapse

Cellular therapy is an emerging field in clinical and personalised medicine. Many adult mesenchymal stem/progenitor cells (MSC) or pluripotent derivatives are being assessed simultaneously in preclinical trials for their potential treatment applications in chronic and degenerative human diseases. Endometrial mesenchymal stem/progenitor cells (eMSC) have been identified as clonogenic cells that exist in unique perivascular niches within the uterine endometrium. Compared with MSC isolated from other tissue sources, such as bone marrow and adipose tissue, eMSC can be extracted through less invasive methods of tissue sampling, and they exhibit improvements in potency, proliferative capacity, and control of culture-induced differentiation. In this review, we summarize the potential cell therapy and tissue engineering applications of eMSC in pelvic organ prolapse (POP), emphasising their ability to exert angiogenic and strong immunomodulatory responses that improve tissue integration of novel surgical constructs for POP and promote vaginal tissue healing.

Tissue engineering to treat pelvic organ prolapse

Pelvic organ prolapse (POP) is a frequent chronic illness, which seriously affects women's living quality. In recent years, tissue engineering has made superior progress in POP treatment, and biological scaffolds have received considerable attention. Nevertheless, pelvic floor reconstruction still faces severe challenges, including the construction of ideal scaffolds, the selection of optimal seed cells, and growth factors. This paper summarizes the recent progress of pelvic floor reconstruction in tissue engineering, and discusses the problems that need to be further considered and solved to provide references for the further development of this field.

Pelvic organ prolapse meshes: Can they preserve the physiological behavior?

Implants for the cure of female genital prolapse still show numerous complications cases that sometimes have dramatic consequences. These implants must be improved to provide physiological support and restore the normal functionalities of the pelvic area. Besides the trend towards lighter meshes, a better understanding of the in vivo role and impact of the mesh implantation is required. This work investigates the mechanical impact of meshes after implantation with regards to the behavior of the native tissues. Three meshes were studied to assess their mechanical and biological impact on the native tissues. An animal study was conducted on rats. Four groups (n = 17/group) underwent surgery. Rats were implanted on the abdominal wall with one of the three polypropylene knitted mesh (one mesh/group). The last group served as control and underwent the same surgery without any mesh implantation. Post-operative complications, contraction, mechanical rigidities, and residual deformation after cyclic loading were collected. Non-parametric statistical comparisons were performed (Kruskal-Wallis) to observe potential differences between implanted and control groups. Mechanical characterization showed that one of the three meshes did not alter the mechanical behavior of the native tissues. On the contrary, the two others drastically increased the rigidities and were also associated with clinical complications. All of the meshes seem to reduce the geometrical lengthening of the biological tissues that comes with repetitive loads. Mechanical aspects might play a key role in the compatibility of the mesh in vivo. One of the three materials that were implanted during an animal study seems to provide better support and adapt more properly to the physiological behavior of the native tissues.

Cell-based endometrial regeneration: current status and future perspectives

Endometrial-related disorders including Asherman's syndrome, thin endometrium, pelvic organ prolapse, and cesarean scar pregnancies can be accompanied by different symptoms such as amenorrhea, infertility, abnormal placental implantation and recurrent miscarriage. Different methods have been introduced to overcome these problems such as surgery and hormonal therapy but none of them has shown promising outcomes. On the other hand, the development of novel regenerative therapeutic strategies has opened new avenues for the treatment of endometrial-related deficiencies. In this regard, different types of scaffolds, acellular matrices and also cell therapy with adult or stem cells have been investigated for the treatment of endometrial-related deficiencies. In this paper, we review the current status of cell-based endometrium regeneration using scaffold dependent and scaffold-free methods and future perspectives in this field. Moreover, we discuss the endometrial diseases that can be candidates for cell-based treatments. Also, the cells with the potential for endometrial regeneration are explained.

A novel tropoelastin-based resorbable surgical mesh for pelvic organ prolapse repair

Pelvic organ prolapse is a common condition that affects 1 in 4 women across all age groups. It is mainly caused by vaginal birth injury and can be exacerbated by obesity and increased age. Until recently, treatment strategies often used non-degradable synthetic meshes for reconstructive surgery. However, owing to their frequent, unacceptable rate of adverse events such as mesh erosion, transvaginal meshes have been banned in many countries. Recent reports have highlighted the urgent need for biocompatible design of meshes for a safe and effective treatment in the long term. This study reports the design and evaluation of a novel, elastin based degradable mesh using an ovine model of POP as a potential surgical treatment. Elastin is a protein component of the ECM and provides elasticity to tissues throughout the body. Tropoelastin, the monomer subunit of elastin, has been used with success in electrospun constructs as it is a naturally cell interactive polymer. Biomaterials that incorporate tropoelastin support cell attachment and proliferation, and have been proven to encourage elastogenesis and angiogenesis in vitro and in vivo. The biological properties of tropoelastin were combined with the physical properties of PCL, a degradable synthetic polymer, with the aim of producing, characterizing and assessing the performance of continuous tropoelastin:PCL electrospun yarns. Using a modified spinneret electrospinning system and adjusting settings based on relative humidity, four blends of tropoelastin:PCL yarns were fabricated with concentration ratios of 75:25, 50:50, 25:75 and 0:100. Yarns were assessed for ease of manufacture, fibrous architecture, protein/polymer content, yarn stability - including initial tropoelastin release, mechanical strength, and ability to support cell growth. Based on overall favorable properties, a mesh woven from the 50:50 tropoelastin:PCL yarn was implanted into the vagina of a parous ewe with vaginal wall weakness as a model of pelvic organ prolapse. This mesh showed excellent integration with new collagen deposition by SEM and a predominant M2 macrophage response with few pro-inflammatory M1 macrophages after 30 days. The woven tropoelastin:PCL electrospun mesh shows potential as an alternative to non-degradable, synthetic pelvic organ prolapse mesh products.

Electrospun Nanofiber Meshes With Endometrial MSCs Modulate Foreign Body Response by Increased Angiogenesis, Matrix Synthesis, and Anti-Inflammatory Gene Expression in Mice: Implication in Pelvic Floor

Purpose

Transvaginal meshes for the treatment of Pelvic Organ Prolapse (POP) have been associated with severe adverse events and have been banned for clinical use in many countries. We recently reported the design of degradable poly L-lactic acid-co-poly ε-caprolactone nanofibrous mesh (P nanomesh) bioengineered with endometrial mesenchymal stem/stromal cells (eMSC) for POP repair. We showed that such bioengineered meshes had high tissue integration as well as immunomodulatory effects in vivo. This study aimed to determine the key molecular players enabling eMSC-based foreign body response modulation.

Methods

SUSD2⁺ eMSC were purified from single cell suspensions obtained from endometrial biopsies from cycling women by magnetic bead sorting. Electrospun P nanomeshes with and without eMSC were implanted in a NSG mouse skin wound repair model for 1 and 6 weeks. Quantitative PCR was used to assess the expression of extracellular matrix (ECM), cell adhesion, angiogenesis and inflammation genes as log₂ fold changes compared to sham controls. Histology and immunostaining were used to visualize the ECM, blood vessels, and multinucleated foreign body giant cells around implants.

Results

Bioengineered P nanomesh/eMSC constructs explanted after 6 weeks showed significant increase in 35 genes associated with ECM, ECM regulation, cell adhesion angiogenesis, and immune response in comparison to P nanomesh alone. In the absence of eMSC, acute inflammatory genes were significantly elevated at 1 week. However, in the presence of eMSC, there was an increased expression of anti-inflammatory genes including Mrc1 and Arg1 by 6 weeks. There was formation of multinucleated foreign body giant cells around both implants at 6 weeks that expressed CD206, a M2 macrophage marker.

Conclusion

This study reveals that eMSC modulate the foreign body response to degradable P nanomeshes in vivo by altering the expression profile of mouse genes. eMSC reduce acute inflammatory and increase ECM synthesis, angiogenesis and anti-inflammatory gene expression at 6 weeks while forming newly synthesized collagen within the nanomeshes and neo-vasculature in close proximity. From a tissue engineering perspective, this is a hallmark of a highly successful implant, suggesting significant potential as alternative surgical constructs for the treatment of POP.

Landmarks in vaginal mesh development: polypropylene mesh for treatment of SUI and POP

Vaginal meshes used in the treatment of stress urinary incontinence (SUI) and pelvic organ prolapse (POP) have produced highly variable outcomes, causing life-changing complications in some patients while providing others with effective, minimally invasive treatments. The risk:benefit ratio when using vaginal meshes is a complex issue in which a combination of several factors, including the inherent incompatibility of the mesh material with some applications in pelvic reconstructive surgeries and the lack of appropriate regulatory approval processes at the time of the premarket clearance of these products, have contributed to the occurrence of complications caused by vaginal mesh. Surgical mesh used in hernia repair has evolved over many years, from metal implants to knitted polymer meshes that were adopted for use in the pelvic floor for treatment of POP and SUI. The evolution of the material and textile properties of the surgical mesh was guided by clinical feedback from hernia repair procedures, which were also being modified to obtain the best outcomes with use of the mesh. Current evidence shows how surgical mesh fails biomechanically when used in the pelvic floor and materials with improved performance can be developed using modern material processing and tissue engineering techniques.

Composite mesh design for delivery of autologous mesenchymal stem cells influences mesh integration, exposure and biocompatibility in an ovine model of pelvic organ prolapse

The widespread use of synthetic transvaginal polypropylene mesh for treating Pelvic Organ Prolapse (POP) has been curtailed due to serious adverse effects highlighted in 2008 and 2011 FDA warnings and subsequent legal action. We are developing new synthetic mesh to deliver endometrial mesenchymal stem cells (eMSC) to improve mesh biocompatibility and restore strength to prolapsed vaginal tissue. Here we evaluated knitted polyamide (PA) mesh in an ovine multiparous model using transvaginal implantation and matched for the degree of POP. Polyamide mesh dip-coated in gelatin and stabilised with 0.5% glutaraldehyde (PA/G) were used either alone or seeded with autologous ovine eMSC (eMSC/PA/G), which resulted in substantial mesh folding, poor tissue integration and 42% mesh exposure in the ovine model. In contrast, a two-step insertion protocol, whereby the uncoated PA mesh was inserted transvaginally followed by application of autologous eMSC in a gelatin hydrogel onto the mesh and crosslinked with blue light (PA + eMSC/G), integrated well with little folding and no mesh exposure. The autologous ovine eMSC survived 30 days in vivo but had no effect on mesh integration. The stiff PA/G constructs provoked greater myofibroblast and inflammatory responses in the vaginal wall, disrupted the muscularis layer and reduced elastin fibres compared to PA + eMSC/G constructs. This study identified the superiority of a two-step protocol for implanting synthetic mesh in cellular compatible composite constructs and simpler surgical application, providing additional translational value.

Mesenchymal stem cell-based bioengineered constructs: foreign body response, cross-talk with macrophages and impact of biomaterial design strategies for pelvic floor disorders

An excessive foreign body response (FBR) has contributed to the adverse events associated with polypropylene mesh usage for augmenting pelvic organ prolapse surgery. Consequently, current biomaterial research considers the critical role of the FBR and now focuses on developing better biocompatible biomaterials rather than using inert implants to improve the clinical outcomes of their use. Tissue engineering approaches using mesenchymal stem cells (MSCs) have improved outcomes over traditional implants in other biological systems through their interaction with macrophages, the main cellular player in the FBR. The unique angiogenic, immunomodulatory and regenerative properties of MSCs have a direct impact on the FBR following biomaterial implantation. In this review, we focus on key aspects of the FBR to tissue-engineered MSC-based implants for supporting pelvic organs and beyond. We also discuss the immunomodulatory effects of the recently discovered endometrial MSCs on the macrophage response to new biomaterials designed for use in pelvic floor reconstructive surgery. We conclude with a focus on considerations in biomaterial design that take into account the FBR and will likely influence the development of the next generation of biomaterials for gynaecological applications.

Biological acellular pericardial mesh regulated tissue integration and remodeling in a rat model of breast prosthetic implantation

The use of biological meshes has proven beneficial in surgical restriction and periprosthetic capsular contracture following breast prosthetic-reconstruction. Three different types (smooth, texturized, and polyurethane) of silicone round mini prostheses were implanted under rat skin with or without two different bovine acellular pericardial biological meshes (APMs, BioRipar, and Tutomesh). One hundred eighty-six female rats were divided into 12 groups, sacrificed after 3, 6, and 24 weeks and tissue samples investigated by histology and immunohistochemistry. Implantation of both APMs, with or without prostheses, reduced capsular α-SMA expression and CD3⁺ inflammatory cell infiltration, increasing capillary density and cell proliferation, with some differences. In particular, Tutomesh was associated with higher peri-APM CD3⁺ inflammation, prosthetic capsular dermal α-SMA expression and less CD31⁺ vessels and cell proliferation compared with BioRipar. None differences were observed in tissue integration and remodeling following the APM + prostheses implantation; the different prostheses did not influence tissue remodeling. The aim of our study was to investigate if/how the use of different APMs, with peculiar intrinsic characteristics, may influence tissue integration. The structure of APMs critically influenced tissue remodeling after implantation. Further studies are needed to develop new APMs able to optimize tissue integration and neoangiogenesis minimizing periprosthetic inflammation and fibrosis.

Ventral hernia repair in rat using nanofibrous polylactic acid/polypropylene meshes

Aim: In the present study, we combined a nanofibrous polylactic acid (PLA) scaffold fabricated by electrospinning with a polypropylene (PP) material to generate a new type of mesh for hernia repair. Materials & methods: The PLA/PP mesh was tested with tensile testing, in vitro cytocompatibility and degradation. A total of 90 rats were randomly allocated to PLA/PP, PP and polyester (PE) mesh groups for the in vivo study to evaluate the properties of PLA/PP mesh. Results: PLA/PP mesh had superior mechanical properties. It also resulted in less inflammation adhesion formation (p < 0.05), which was related to the TGF-β1/Smad pathway. The distribution of collagen I and III in PLA/PP mesh was also superior to those in the other two groups (p < 0.05). Conclusion: The PLA/PP mesh would be suitable for ventral hernia repair in the future.

Endometrial Mesenchymal Stem/Stromal Cells Modulate the Macrophage Response to Implanted Polyamide/Gelatin Composite Mesh in Immunocompromised and Immunocompetent Mice

The immunomodulatory properties of human endometrial mesenchymal stem cells (eMSC) have not been well characterised. Initial studies showed that eMSC modulated the chronic inflammatory response to a non-degradable polyamide/gelatin mesh in a xenogeneic rat skin wound repair model, but the mechanism remains unclear. In this study, we investigated the immunomodulatory effect of eMSC on the macrophage response to polyamide/gelatin composite mesh in an abdominal subcutaneous wound repair model in C57BL6 immunocompetent and NSG (NOD-Scid-IL2Rgamma^null) immunocompromised mice to determine whether responses differed in the absence of an adaptive immune system and NK cells. mCherry lentivirus-labelled eMSC persisted longer in NSG mice, inducing longer term paracrine effects. Inclusion of eMSC in the mesh reduced inflammatory cytokine (Il-1β, Tnfα) secretion, and in C57BL6 mice reduced CCR7⁺ M1 macrophages surrounding the mesh on day 3 and increased M2 macrophage marker mRNA (Arg1, Mrc1, Il10) expression at days 3 and 7. In NSG mice, these effects were delayed and only observed at days 7 and 30 in comparison with controls implanted with mesh alone. These results show that the differences in the immune status in the two animals directly affect the survival of xenogeneic eMSC which leads to differences in the short-term and long-term macrophage responses to implanted meshes.

Stem cell therapy in Asherman syndrome and thin endometrium: Stem cell- based therapy

The endometrium is one of the essential components of the uterus. The endometrium of human is a complex and dynamic tissue, which undergoes periods of growth and turn over during any menstrual cycle. Stem cells are initially undifferentiated cells that display a wide range of differentiation potential with no distinct morphological features. Stem cell therapy method recently has become a novel procedure for treatment of tissue injury and fibrosis in response to damage. Currently, there is massive interest in stem cells as a novel treatment method for regenerative medicine and more specifically for the regeneration of human endometrium disorder like Asherman syndrome (AS) and thin endometrium. AS also known as intrauterine adhesion (IUA) is a uterine disorder with the aberrant creation of adhesions within the uterus and/or cervix. Patients with IUA are significantly associated with menstrual abnormalities and suffer from pelvic pain. In addition, IUA might prevent implantation of the blastocyst, impair the blood supply to the uterus and early fetus, and finally result in the recurrent miscarriage or infertility in the AS patients. It has been evidenced that the transplantation of different stem cells with a diverse source in the endometrial zone had effects on endometrium such as declined the fibrotic area, an elevated number of glands, stimulated angiogenesis, the enhanced thickness of the endometrium, better formed tissue construction, protected gestation, and improved pregnancy rate. This study presents a summary of the investigations that indicate the key role of stem cell therapy in regeneration and renovation of defective parts.

STEM CELLS HEMATOPOIETIC NICHES AND INFLAMMATORY RESPONSE TO DIFFERENT SYNTHETIC PROSTHESIS IMPLANTED IN RAT WITH INCISIONAL HERNIAS

Background:

Extramedullary hematopoiesis depends on complex pathophysiological mechanisms linked to hematopoietic stem cells and the proteins considered mediators of the inflammation. The identification of hematopoietic cells outside bone marrow in the adult is an occurrence that can occasionally follows the inflammatory response, was considered a secondary occurrence, but current biomolecular studies have changed that concept.

Aim:

Describe the presence of clusters of precursor cells of platelets (megakaryocytes), and cells of the inflammatory response in the abdominal wall and spleen of rats with experimentally induced incisional hernias and repaired with different synthetic prostheses.

Methods:

Twenty-five rats with incisional hernias previously performed, were divided into groups of five animals each: Group 1, repair of the hernia defect without prosthetic implant; Group 2, repair with polypropylene prosthesis; Group 3, repair using polypropylene with low weight; Group 4, the use of polypropylene and polyglecaprone prosthesis; Group 5, of polypropylene and polyglactin prosthesis. All prostheses were cut in rhombus format with area 2,625 cm². The animals were reoperated after 10 days, the abdominal walls were removed with the viscera attached to them and the material was processed for histological study.

Results:

Megakaryocyte niches in the abdominal wall and spleen, occasionally removed together with the adhesions produced in animals with implantation of prostheses and significant inflammatory reaction.

Conclusion:

The intense inflammatory reaction due to the prostheses with polypropylene in their composition was disproportionate to the expected response, indicating that further studies should be accomplished including immunophenotyping evaluation and specific panels of monoclonal antibodies to better understand the findings.

A preclinical evaluation of polypropylene/polylacticacid hybrid meshes for fascial defect repair using a rat abdominal hernia model

OBJECTIVES

Synthetic mesh surgery for both abdominal and urogenital hernia repair is often unsatisfactory in the long-term due to postoperative complications. We hypothesized that a semi-degradable mesh hybrid may provide more appropriate biocompatibility with comparable mechanical properties. The aim was to compare its in vivo biocompatibility with a commercial polypropylene (PP) mesh.

METHODS

72 rats were randomly allocated to either our new composite mesh (monofilament PP mesh knitted with polylactic-acid-fibers (PLA)) or to a commercially available PP mesh that was used as a control. 15, 90, and 180 days after implantation into the rat abdomen mesh tissue complexes were analysed for erosion, contraction, foreign body reaction, tissue integration and biomechanical properties.

RESULTS

No differences were seen in regard to clinical parameters including erosion, contraction or infection rates between the two groups. Biomechanical properties including breaking load, stiffness and deformation did not show any significant differences between the different materials at any timepoint. Macrophage staining did not reveal any significant differences between the two groups or between timepoints either. In regard to collagen I there was significantly less collagen I in the PP group compared to the PP/ PLA group at day 180. Collagen III did not show any significant differences at any timepoint between the two groups.

CONCLUSION

A PP/PLA hybrid mesh, leaving a low amount of PP after PLA degradation seems to have comparable biomechanical properties like PP at 180 days due to enhanced collagen production without significant differences in erosion, contraction, herniation or infection rates.

Ovine multiparity is associated with diminished vaginal muscularis, increased elastic fibres and vaginal wall weakness: implication for pelvic organ prolapse

Pelvic Organ Prolapse (POP) is a major clinical burden affecting 25% of women, with vaginal delivery a major contributing factor. We hypothesised that increasing parity weakens the vagina by altering the extracellular matrix proteins and smooth muscle thereby leading to POP vulnerability. We used a modified POP-quantification (POP-Q) system and a novel pressure sensor to measure vaginal wall weakness in nulliparous, primiparous and multiparous ewes. These measurements were correlated with histological, biochemical and biomechanical properties of the ovine vagina. Primiparous and multiparous ewes had greater displacement of vaginal tissue compared to nulliparous at points Aa, Ap and Ba and lower pressure sensor measurements at points equivalent to Ap and Ba. Vaginal wall muscularis of multiparous ewes was thinner than nulliparous and had greater elastic fibre content. Collagen content was lower in primiparous than nulliparous ewes, but collagen organisation did not differ. Biomechanically, multiparous vaginal tissue was weaker and less stiff than nulliparous. Parity had a significant impact on the structure and function of the ovine vaginal wall, as the multiparous vaginal wall was weaker and had a thinner muscularis than nulliparous ewes. This correlated with "POP-Q" and pressure sensor measurements showing greater tissue laxity in multiparous compared to nulliparous ewes.

Tissue response to collagen containing polypropylene meshes in an ovine vaginal repair model

Pelvic Organ Prolapse (POP) is the herniation of pelvic organs into the vagina. Despite broad acceptance of mesh use in POP surgical repair, the complication rate is unacceptable. We hypothesized that collagen-containing polypropylene (PP) mesh types could modulate mesh-tissue integration and reduce long-term inflammation, thereby reducing mesh-associated complications. This study compared the long-term tissue response to an unmodified PP mesh and two collagen containing meshes in an ovine model which has similar pelvic anatomy and vaginal size to human. Three commercially available macroporous PP meshes, uncoated PP mesh (Avaulta Solo) (PP), the same textile PP mesh layered with a sheet of cross-linked porcine acellular matrix (Avaulta Plus) (PP-ACM) and a different yet also macroporous PP (Sofradim) mesh coated with solubilized atelocollagen (Ugytex) (PP-sCOL) were implanted in the ovine vagina and tissue explanted after 60 and 180days. The macrophage phenotype and response to implanted meshes, and vascularity were quantified by immunostaining and morphometry. We quantified changes in extracellular matrix composition biochemically and collagen organisation and percentage area around the interface of the mesh implants by Sirius Red birefringence and morphometry. PP-ACM induced a more sustained inflammatory response, indicated by similar CD45(+) leukocytes but reduced CD163(+) M2 macrophages at 60days (P<0.05). PP-sCOL increased Von Willebrand Factor (vWF)-immunoreactive vessel profiles after 60days. At the micro-molecular level, collagen birefringence quantification revealed significantly fewer mature collagen fibrils (red, thick fibrils) at the mesh-tissue interface than control tissue for all mesh types (P<0.001) but still significantly greater than the proportion of immature (green thin fibrils) at 60days (P<0.05). The proportion of mature collagen fibrils increased with time around the mesh filaments, particularly those containing collagen. The total collagen percent area at the mesh interface was greatest around the PP-ACM mesh at 60days (P<0.05). By 180days the total mature and immature collagen fibres at the interface of the mesh filaments resembled that of native tissue. In particular, these results suggest that both meshes containing collagen evoke different types of tissue responses at different times during the healing response yet both ultimately lead to physiological tissue formation approaching that of normal tissue.

STATEMENT OF SIGNIFICANCE

Pelvic organ prolapse (POP) is the descent of the pelvic organs to the vagina. POP affects more than 25% of all women and the lifetime risk of undergoing POP surgery is 19%. Although synthetic polypropylene (PP) meshes have improved the outcome of the surgical treatment for POP, there was an unacceptable rate of adverse events including mesh exposure and contracture. It is hypothesized that coating the PP meshes with collagen would provide a protective effect by preventing severe mesh adhesions to the wound, resulting in a better controlled initial inflammatory response, and diminished risk of exposure. In this study we assessed the effect of two collagen-containing PP meshes on the long-term vaginal tissue response using new techniques to quantify these tissue responses.

Identification and Characterization of Human Endometrial Mesenchymal Stem/Stromal Cells and Their Potential for Cellular Therapy

SummaryHuman endometrium is a highly regenerative tissue, undergoing more than 400 cycles of proliferation, differentiation, and shedding during a woman's reproductive life. Adult stem cells, including mesenchymal stem/stromal cells (MSCs), are likely responsible for the immense cellular turnover in human endometrium. The unique properties of MSCs, including high proliferative ability, self-renewal, differentiation to mesodermal lineages, secretion of angiogenic factors, and many other growth-promoting factors make them useful candidates for cellular therapy and tissue engineering. In this review, we summarize the identification and characterization of newly discovered MSCs from the human endometrium: their properties, the surface markers used for their prospective isolation, their perivascular location in the endometrium, and their potential application in cellular therapies.

SIGNIFICANCE

The endometrium, or the lining of uterus, has recently been identified as a new and accessible source of mesenchymal stem cells, which can be obtained without anesthesia. Endometrial mesenchymal stem cells have comparable properties to bone marrow and adipose tissue mesenchymal stem cells. Endometrial mesenchymal stem cells are purified with known and novel perivascular surface markers and are currently under investigation for their potential use in cellular therapy for several clinical conditions with significant burden of disease.

Endometrial mesenchymal stem cells as a cell based therapy for pelvic organ prolapse

Pelvic organ prolapse (POP) occurs when the pelvic organs (bladder, bowel or uterus) herniate into the vagina, causing incontinence, voiding, bowel and sexual dysfunction, negatively impacting upon a woman’s quality of life. POP affects 25% of all women and results from childbirth injury. For 19% of all women, surgical reconstructive surgery is required for treatment, often augmented with surgical mesh. The surgical treatment fails in up to 30% of cases or results in adverse effects, such as pain and mesh erosion into the bladder, bowel or vagina. Due to these complications the Food and Drug Administration cautioned against the use of vaginal mesh and several major brands have been recently been withdrawn from market. In this review we will discuss new cell-based approaches being developed for the treatment of POP. Several cell types have been investigated in animal models, including a new source of mesenchymal stem/stromal cells (MSC) derived from human endometrium. The unique characteristics of endometrial MSC, methods for their isolation and purification and steps towards their development for good manufacturing practice production will be described. Animal models that could be used to examine the potential for this approach will also be discussed as will a rodent model showing promise in developing an endometrial MSC-based therapy for POP. The development of a preclinical large animal model for assessing tissue engineering constructs for treating POP will also be mentioned.

Changes in pelvic organ prolapse mesh mechanical properties following implantation in rats

BACKGROUND

Pelvic organ prolapse (POP) is a multifactorial disease that manifests as the herniation of the pelvic organs into the vagina. Surgical methods for prolapse repair involve the use of a synthetic polypropylene mesh. The use of this mesh has led to significantly higher anatomical success rates compared with native tissue repairs, and therefore, despite recent warnings by the Food and Drug Administration regarding the use of vaginal mesh, the number of POP mesh surgeries has increased over the last few years. However, mesh implantation is associated with higher postsurgery complications, including pain and erosion, with higher consecutive rates of reoperation when placed vaginally. Little is known on how the mechanical properties of the implanted mesh itself change in vivo. It is assumed that the mechanical properties of these meshes remain unchanged, with any differences in mechanical properties of the formed mesh-tissue complex attributed to the attached tissue alone. It is likely that any changes in mesh mechanical properties that do occur in vivo will have an impact on the biomechanical properties of the formed mesh-tissue complex.

OBJECTIVE

The objective of the study was to assess changes in the multiaxial mechanical properties of synthetic clinical prolapse meshes implanted abdominally for up to 90 days, using a rat model. Another objective of the study was to assess the biomechanical properties of the formed mesh-tissue complex following implantation.

STUDY DESIGN

Three nondegradable polypropylene clinical synthetic mesh types for prolapse repair (Gynemesh PS, Polyform Lite, and Restorelle) and a partially degradable polypropylene/polyglecaprone mesh (UltraPro) were mechanically assessed before and after implantation (n = 5/ mesh type) in Sprague Dawley rats for 30 (Gynemesh PS, Polyform Lite, and Restorelle) and 90 (UltraPro and Polyform Lite) days. Stiffness and permanent extension following cyclic loading, and breaking load, of the preimplanted mesh types, explanted mesh-tissue complexes, and explanted meshes were assessed using a multi-axial (ball-burst) method.

RESULTS

The 4 clinical meshes varied from each other in weight, thickness, porosity, and pore size and showed significant differences in stiffness and breaking load before implantation. Following 30 days of implantation, the mechanical properties of some mesh types altered, with significant decreases in mesh stiffness and breaking load, and increased permanent extension. After 90 days these changes were more obvious, with significant decreases in stiffness and breaking load and increased permanent extension. Similar biomechanical properties of formed mesh-tissue complexes were observed for mesh types of different preimplant stiffness and structure after 90 days implantation.

CONCLUSION

This is the first study to report on intrinsic changes in the mechanical properties of implanted meshes and how these changes have an impact on the estimated tissue contribution of the formed mesh-tissue complex. Decreased mesh stiffness, strength, and increased permanent extension following 90 days of implantation increase the biomechanical contribution of the attached tissue of the formed mesh-tissue complex more than previously thought. This needs to be considered when using meshes for prolapse repair.

Endometrial stem/progenitor cells: the first 10 years

BACKGROUND

The existence of stem/progenitor cells in the endometrium was postulated many years ago, but the first functional evidence was only published in 2004. The identification of rare epithelial and stromal populations of clonogenic cells in human endometrium has opened an active area of research on endometrial stem/progenitor cells in the subsequent 10 years.

METHODS

The published literature was searched using the PubMed database with the search terms ‘endometrial stem cells and menstrual blood stem cells' until December 2014.

RESULTS

Endometrial epithelial stem/progenitor cells have been identified as clonogenic cells in human and as label-retaining or CD44⁺ cells in mouse endometrium, but their characterization has been modest. In contrast, endometrial mesenchymal stem/stromal cells (MSCs) have been well characterized and show similar properties to bone marrow MSCs. Specific markers for their enrichment have been identified, CD146⁺PDGFRβ⁺ (platelet-derived growth factor receptor beta) and SUSD2⁺ (sushi domain containing-2), which detected their perivascular location and likely pericyte identity in endometrial basalis and functionalis vessels. Transcriptomics and secretomics of SUSD2⁺ cells confirm their perivascular phenotype. Stromal fibroblasts cultured from endometrial tissue or menstrual blood also have some MSC characteristics and demonstrate broad multilineage differentiation potential for mesodermal, endodermal and ectodermal lineages, indicating their plasticity. Side population (SP) cells are a mixed population, although predominantly vascular cells, which exhibit adult stem cell properties, including tissue reconstitution. There is some evidence that bone marrow cells contribute a small population of endometrial epithelial and stromal cells. The discovery of specific markers for endometrial stem/progenitor cells has enabled the examination of their role in endometrial proliferative disorders, including endometriosis, adenomyosis and Asherman's syndrome. Endometrial MSCs (eMSCs) and menstrual blood stromal fibroblasts are an attractive source of MSCs for regenerative medicine because of their relative ease of acquisition with minimal morbidity. Their homologous and non-homologous use as autologous and allogeneic cells for therapeutic purposes is currently being assessed in preclinical animal models of pelvic organ prolapse and phase I/II clinical trials for cardiac failure. eMSCs and stromal fibroblasts also exhibit non-stem cell-associated immunomodulatory and anti-inflammatory properties, further emphasizing their desirable properties for cell-based therapies.

CONCLUSIONS

Much has been learnt about endometrial stem/progenitor cells in the 10 years since their discovery, although several unresolved issues remain. These include rationalizing the terminology and diagnostic characteristics used for distinguishing perivascular stem/progenitor cells from stromal fibroblasts, which also have considerable differentiation potential. The hierarchical relationship between clonogenic epithelial progenitor cells, endometrial and decidual SP cells, CD146⁺PDGFR-β⁺ and SUSD2⁺ cells and menstrual blood stromal fibroblasts still needs to be resolved. Developing more genetic animal models for investigating the role of endometrial stem/progenitor cells in endometrial disorders is required, as well as elucidating which bone marrow cells contribute to endometrial tissue. Deep sequencing and epigenetic profiling of enriched populations of endometrial stem/progenitor cells and their differentiated progeny at the population and single-cell level will shed new light on the regulation and function of endometrial stem/progenitor cells.

Mesh implants: An overview of crucial mesh parameters

Hernia repair is one of the most frequently performed surgical interventions that use mesh implants. This article evaluates crucial mesh parameters to facilitate selection of the most appropriate mesh implant, considering raw materials, mesh composition, structure parameters and mechanical parameters. A literature review was performed using the PubMed database. The most important mesh parameters in the selection of a mesh implant are the raw material, structural parameters and mechanical parameters, which should match the physiological conditions. The structural parameters, especially the porosity, are the most important predictors of the biocompatibility performance of synthetic meshes. Meshes with large pores exhibit less inflammatory infiltrate, connective tissue and scar bridging, which allows increased soft tissue ingrowth. The raw material and combination of raw materials of the used mesh, including potential coatings and textile design, strongly impact the inflammatory reaction to the mesh. Synthetic meshes made from innovative polymers combined with surface coating have been demonstrated to exhibit advantageous behavior in specialized fields. Monofilament, large-pore synthetic meshes exhibit advantages. The value of mesh classification based on mesh weight seems to be overestimated. Mechanical properties of meshes, such as anisotropy/isotropy, elasticity and tensile strength, are crucial parameters for predicting mesh performance after implantation.

Prospects for regenerative medicine approaches in women's health

Novel regenerative strategies, stem cell‐based therapies or the development of advanced human cell‐based in vitro‐manufactured preclinical test systems offer great potential to generate advances in clinical practice in the field of women's health. This review aims to provide a brief overview of the current advances in the field.

Critical analysis of experimental model for study of adhesions after incisional hernias induced in rats' and repair of abdominal wall with different biomaterials

BACKGROUND

Adhesions induced by biomaterials experimentally implanted in the abdominal cavity are basically studied by primary repair of different abdominal wall defects or by the correction of incisional hernias previously performed with no precise definition of the most appropriate model.

AIM

To describe the adhesions which occur after the development of incisional hernias, before the prosthesis implantation, in an experimental model to study the changes induced by different meshes.

METHODS

Incisional hernias were performed in 10 rats with hernia orifices of standardized dimensions, obtained by the median incision of the abdominal wall and eversion of the defect edges. Ten days after the procedure adhesions of abdominal structures were found when hernias were repaired with different meshes.

RESULTS

The results showed hernia sac well defined in all rats ten days after the initial procedure. Adhesions of the greater omentum occurred in five animals of which two also showed adhesions of small bowel loops besides the omentum, and another two showed liver adhesions as well as the greater omentum, numbers with statistical significance by Student's t test (p<0.05).

CONCLUSION

Although it reproduces the real clinical situation, the choice of experimental model of incisional hernia repair previously induced implies important adhesions, with possible repercussions in the evaluation of the second operation, when different implants of synthetic materials are used.

The endometrium as a source of mesenchymal stem cells for regenerative medicine

Stem cell therapies have opened new frontiers in medicine with the possibility of regenerating lost or damaged cells. Embryonic stem cells, induced pluripotent stem cells, hematopoietic stem cells, and mesenchymal stem cells have been used to derive mature cell types for tissue regeneration and repair. However, the endometrium has emerged as an attractive, novel source of adult stem cells that are easily accessed and demonstrate remarkable differentiation capacity. In this review, we summarize our current understanding of endometrial stem cells and their therapeutic potential in regenerative medicine.

Temporal changes in the biomechanical properties of endometrial mesenchymal stem cell seeded scaffolds in a rat model

Use of synthetic clinical meshes in pelvic organ prolapse (POP) repair can lead to poor mechanical compliance in vivo, as a result of a foreign body reaction leading to excessive scar tissue formation. Seeding mesh with mesenchymal stem cells (MSCs) prior to implantation may reduce the foreign body reaction and lead to improved biomechanical properties of the mesh-tissue complex. This study investigates the influence of seeding human endometrial mesenchymal stem cells (eMSCs) on novel gelatin-coated polyamide scaffolds, to identify differences in scaffold/tissue biomechanical properties and new tissue growth following up to 90 days' implantation, in a subcutaneous rat model of wound repair. Scaffolds were subcutaneously implanted, either with or without eMSCs, in immunocompromised rats and following 7, 30, 60 and 90 days were removed and assessed for their biomechanical properties using uniaxial tensile testing. Following 7, 30 and 90 days' implantation scaffolds were assessed for tissue ingrowth and organization using histological staining and scanning electron microscopy. The eMSCs were associated with altered collagen growth and organization around the mesh filaments of the scaffold, affecting the physiologically relevant tensile properties of the scaffold-tissue complex, in the toe region of the load-elongation curve. Scaffolds seeded with eMSCs were significantly less stiff on initial stretching than scaffolds implanted without eMSCs. Collagen growth and organization were enhanced in the long-term in eMSC-seeded scaffolds, with improved fascicle formation and crimp configuration. Results suggest that neo-tissue formation and remodelling may be enhanced through seeding scaffolds with eMSCs.

Mesenchymal stem cells: potential for therapy and treatment of chronic non-healing skin wounds

Wound healing is a complex physiological process including overlapping phases (hemostatic/inflammatory, proliferating and remodeling phases). Every alteration in this mechanism might lead to pathological conditions of different medical relevance. Treatments for chronic non-healing wounds are expensive because reiterative treatments are needed. Regenerative medicine and in particular mesenchymal stem cells approach is emerging as new potential clinical application in wound healing. In the past decades, advance in the understanding of molecular mechanisms underlying wound healing process has led to extensive topical administration of growth factors as part of wound care. Currently, no definitive treatment is available and the research on optimal wound care depends upon the efficacy and cost-benefit of emerging therapies. Here we provide an overview on the novel approaches through stem cell therapy to improve cutaneous wound healing, with a focus on diabetic wounds and Systemic Sclerosis-associated ulcers, which are particularly challenging. Current and future treatment approaches are discussed with an emphasis on recent advances.

Induction of endometrial mesenchymal stem cells into tissue-forming cells suitable for fascial repair

Pelvic organ prolapse is a major hidden burden affecting almost one in four women. It is treated by reconstructive surgery, often augmented with synthetic mesh. To overcome the growing concerns of using current synthetic meshes coupled with the high risk of reoperation, a tissue engineering strategy has been developed, adopting a novel source of mesenchymal stem cells. These cells are derived from the highly regenerative endometrial lining of the uterus (eMSCs) and will be delivered in vivo using a new gelatin-coated polyamide scaffold. In this study, gelatin properties were optimized by altering the gelatin concentration and extent of crosslinking to produce the desired gelation and degradation rate in culture. Following cell seeding of uncoated polyamide (PA) and gelatin-coated meshes (PA+G), the growth rate of eMSCs on the PA+G scaffolds was more than that on the PA alone, without compromising cell shape. eMSCs cultured on the PA+G scaffold retained their phenotype, as demonstrated by W5C5/SUSD2 (eMSC-specific marker) immunocytochemistry. Additionally, eMSCs were induced to differentiate into smooth muscle cells (SMC), as shown by immunofluorescence for smooth muscle protein 22 and smooth muscle myosin heavy chain. eMSCs also differentiated into fibroblast-like cells when treated with connective tissue growth factor with enhanced detection of Tenascin-C and collagen type I as well as new tissue formation, as seen by Masson's trichrome. In summary, it was demonstrated that the PA+G scaffold is an appropriate platform for eMSC delivery, proliferation and differentiation into SMC and fibroblasts, with good biocompatibility and the capacity to regenerate neo-tissue.

Regional variation in tissue composition and biomechanical properties of postmenopausal ovine and human vagina

OBJECTIVE

There are increasing numbers of reports describing human vaginal tissue composition in women with and without pelvic organ prolapse with conflicting results. The aim of this study was to compare ovine and human posterior vaginal tissue in terms of histological and biochemical tissue composition and to assess passive biomechanical properties of ovine vagina to further characterise this animal model for pelvic organ prolapse research.

STUDY DESIGN

Vaginal tissue was collected from ovariectomised sheep (n = 6) and from postmenopausal women (n = 7) from the proximal, middle and distal thirds. Tissue histology was analyzed using Masson's Trichrome staining; total collagen was quantified by hydroxyproline assays, collagen III/I+III ratios by delayed reduction SDS PAGE, glycosaminoglycans by dimethylmethylene blue assay, and elastic tissue associated proteins (ETAP) by amino acid analysis. Young's modulus, maximum stress/strain, and permanent strain following cyclic loading were determined in ovine vagina.

RESULTS

Both sheep and human vaginal tissue showed comparable tissue composition. Ovine vaginal tissue showed significantly higher total collagen and glycosaminoglycan values (p<0.05) nearest the cervix. No significant differences were found along the length of the human vagina for collagen, GAG or ETAP content. The proximal region was the stiffest (Young's modulus, p<0.05), strongest (maximum stress, p<0.05) compared to distal region, and most elastic (permanent strain).

CONCLUSION

Sheep tissue composition and mechanical properties showed regional differences along the postmenopausal vaginal wall not apparent in human vagina, although the absolute content of proteins were similar. Knowledge of this baseline variation in the composition and mechanical properties of the vaginal wall will assist future studies using sheep as a model for vaginal surgery.

Biomechanical evaluation and surface characterization of a nano-modified surface on PEEK implants: a study in the rabbit tibia

Polyether ether ketone (PEEK) is today frequently used as a biomaterial in different medical operations due to its excellent mechanical and chemical properties. However, the untreated surface of PEEK is bioinert and hydrophobic, and it does not osseointegrate in its pure form. The aim of this study was to evaluate a unique nano-modified surface of PEEK with respect to osseointegration. Forty-eight threaded, non-cutting PEEK implants were inserted bilaterally in the tibia of 24 rabbits. Half of the implants (n=24) were coated with nanocrystalline hydroxyapatite (test) and the remaining implants (n=24) were left uncoated (control). Half of the animals (n=12) were euthanized after 3 weeks of healing and the remaining (n=12) after 12 weeks. The implant retention was measured with a removal torque apparatus. Surface analysis was performed with interferometry, scanning electron microscopy, and X-ray photon spectroscopy to relate the removal torque to the applied surface. The test implants revealed a significantly higher retention after 3 weeks (P=0.05) and 12 weeks (P=0.028) compared to controls. The result of the present study proves that the addition of nanocrystalline hydroxyapatite coating to PEEK surfaces significantly increases its removal torque and biocompatibility.

Endometrial stem cells in regenerative medicine

First described in 2004, endometrial stem cells (EnSCs) are adult stem cells isolated from the endometrial tissue. EnSCs comprise of a population of epithelial stem cells, mesenchymal stem cells, and side population stem cells. When secreted in the menstrual blood, they are termed menstrual stem cells or endometrial regenerative cells. Mounting evidence suggests that EnSCs can be utilized in regenerative medicine. EnSCs can be used as immuno-modulatory agents to attenuate inflammation, are implicated in angiogenesis and vascularization during tissue regeneration, and can also be reprogrammed into induced pluripotent stem cells. Furthermore, EnSCs can be used in tissue engineering applications and there are several clinical trials currently in place to ascertain the therapeutic potential of EnSCs. This review highlights the progress made in EnSC research, describing their mesodermal, ectodermal, and endodermal potentials both in vitro and in vivo.

Acute in vivo response to an alternative implant for urogynecology

Purpose. To investigate in vivo the acute host response to an alternative implant designed for the treatment of stress urinary incontinence (SUI) and pelvic organ prolapse (POP). Methods. A biodegradable scaffold was produced from poly-L-lactic acid (PLA) using the electrospinning technique. Human and rat adipose-derived stem cells (ADSCs) were isolated and characterized by fluorescence-activated cell sorting and differentiation assays. PLA scaffolds were seeded and cultured for 2 weeks with human or rat ADSCs. Scaffolds with and without human or rat ADSCs were implanted subcutaneously on the abdominal wall of rats. After 3 and 7 days, 6 animals from each group were sacrificed. Sections from each sample were analyzed by Haematoxylin and Eosin staining, Sirius red staining, and immunohistochemistry for CD68, PECAM-1, and collagen I and III. Results. Animals responded to the scaffolds with an acute macrophage response. After 7 days of implantation, there was extensive host cell penetration, new blood vessel formation, and new collagen deposition throughout the full thickness of the samples without obvious differences between cell-containing and cell-free scaffolds. Conclusions. The acute in vivo response to an alternative implant (both with and without cells) for the treatment of SUI and POP showed good acute integration into the host tissues.

Mesenchymal stem/stromal cells in post-menopausal endometrium

STUDY QUESTION

Does post-menopausal endometrium contain mesenchymal stem/stromal cells (MSC) that have adult stem cell properties and can be prospectively isolated from a biopsy?

SUMMARY ANSWER

Perivascular W5C5(+) cells isolated from post-menopausal endometrial biopsies displayed characteristic MSC properties of clonogenicity, multipotency and surface phenotype irrespective of whether the women were or were not pre-treated with estrogen to regenerate the endometrium.

WHAT IS KNOWN ALREADY

Recently MSCs have been identified in human premenopausal endometrium, and can be prospectively isolated using a single marker, W5C5/SUSD2.

STUDY DESIGN, SIZE, DURATION

Endometrial tissue of both the functional and basal layers, from 17 premenopausal (pre-MP) women, 19 post-menopausal (post-MP) women without hormonal treatment and 15 post-menopausal women on estrogen replacement therapy (post-MP+ E2), was collected through a prospective phase IV clinical trial over 2 years.

PARTICIPANTS/MATERIALS, SETTING, METHODS

Post-menopausal women <65 years of age were treated with or without E2 for 6-8 weeks prior to tissue collection. Serum E2 levels were determined by estradiol immunoenzymatic assay. Endometrial tissue was obtained from women by biopsy (curettage) just prior to the hysterectomy. The effect of E2 on endometrial thickness and glandular and luminal epithelial height was determined using image analysis. Endometrial tissue was dissociated into single cell suspensions and MSC properties were examined in freshly isolated and short-term cultured, magnetic bead-purified W5C5(+) cells. MSC properties were assessed using clonogenicity, serial cloning, mesodermal differentiation in adipogenic, chondrogenic, osteogenic and myogenic induction culture media, and surface phenotype analysis by flow cytometry. Estrogen receptor α expression in W5C5(+) cells was examined using dual colour immunofluorescence. Vascularity was analysed using CD34 and alpha smooth muscle actin immunostaining and subsequent image analysis.

MAIN RESULTS AND THE ROLE OF CHANCE

A small population of stromal cells with MSC properties was purified with the W5C5 antibody from post-menopausal endometrium, whether atrophic from low circulating estrogen or regenerated from systemic estrogen treatment, similar to premenopausal endometrium. The MSC derived from post-menopausal endometrium treated with or without E2 fulfilled the minimum MSC criteria: clonogenicity, surface phenotype (CD29(+), CD44(+), CD73(+), CD105(+), CD140b(+), CD146(+)) and multipotency. The post-menopausal endometrial MSCs also showed comparable properties to premenopausal eMSC with respect to self-renewal in vitro and W5C5 expression. The W5C5(+) cells were located perivascularly as expected and did not express estrogen receptor α.

LIMITATIONS, REASONS FOR CAUTION

The properties of the MSC derived from post-menopausal endometrium were evaluated in vitro and their in vivo tissue reconstitution capacity has not been established as it has for premenopausal endometrial MSC.

WIDER IMPLICATIONS OF THE FINDINGS

The endometrium is an accessible source of MSC obtainable with minimum morbidity that could be used for future clinical applications as a cell-based therapy. This study shows that menopausal women can access their endometrial MSC by a simple biopsy for use in autologous therapies, particularly if their endometrium has been regenerated by short-term E2 treatment, provided they have an intact uterus and are not contraindicated for short-term E2 treatment. Endometrial MSC in post-menopausal women possess key MSC properties and are a promising source of MSC independent of a woman's age.

STUDY FUNDING/COMPETING INTERESTS

This study was supported by the National Health and Medical Research Council (NHMRC) of Australia grant (1021126) (C.E.G., A.R.) and Senior Research Fellowship (1042298) (C.E.G.), Australian Gynaecological Endoscopic Society grant (A.R.) , Monash International Postgraduate Research Scholarship (DU), Australian Stem Cell Centre, South East Melbourne Alliance for Regenerative Therapies and Australian Stem Cell Centre top up scholarships (DU) and Victorian Government's Operational Infrastructure Support Program. Competing interests: AR receives Preceptorship fees from AMS, advisory board fees and sponsored study from Astellas, and conducts investigator led studies sponsored by AMS and Boston Scientific for other projects.

TRIAL REGISTRATION NUMBER

CTNRN12610000563066.

Inflammatory reaction as determinant of foreign body reaction is an early and susceptible event after mesh implantation

PURPOSE

To investigate and relate the ultrashort-term and long-term courses of determinants for foreign body reaction as biocompatibility predictors for meshes in an animal model.

MATERIALS AND METHODS

Three different meshes (TVT, UltraPro, and PVDF) were implanted in sheep. Native and plasma coated meshes were placed bilaterally: (a) interaperitoneally, (b) as fascia onlay, and (c) as muscle onlay (fascia sublay). At 5 min, 20 min, 60 min, and 120 min meshes were explanted and histochemically investigated for inflammatory infiltrate, macrophage infiltration, vessel formation, myofibroblast invasion, and connective tissue accumulation. The results were related to long-term values over 24 months.

RESULTS

Macrophage invasion reached highest extents with up to 60% in short-term and decreased within 24 months to about 30%. Inflammatory infiltrate increased within the first 2 hours, the reached levels and the different extents and ranking among the investigated meshes remained stable during long-term follow up. For myofibroblasts, connective tissue, and CD31+ cells, no activity was detected during the first 120 min.

CONCLUSION

The local inflammatory reaction is an early and susceptible event after mesh implantation. It cannot be influenced by prior plasma coating and does not depend on the localisation of implantation.

Human endometrial mesenchymal stem cells modulate the tissue response and mechanical behavior of polyamide mesh implants for pelvic organ prolapse repair

BACKGROUND

Pelvic organ prolapse (POP) is defined as the descent of one or more of the pelvic structures into the vagina and includes uterine, vaginal vault, and anterior or posterior vaginal wall prolapse. The treatment of POP may include implantation of a synthetic mesh. However, the long-term benefit of mesh surgery is controversial due to complications such as mesh exposure or pain. The aim of this study was to use a tissue engineering (TE) approach to assess the in vivo biological and biomechanical behavior of a new gelatin/polyamide mesh, seeded with a novel source of mesenchymal stem cells in a subcutaneous rat model of wound repair.

METHODS

W5C5-enriched human endometrial mesenchymal stem cells (eMSC) were seeded onto meshes (gelatin-coated polyamide knit) at 100,000 cells/cm². Meshes, with or without cells were subcutaneously implanted dorsally in immunocompromised rats for 7, 30, 60, and 90 days. Flow cytometry was used to detect DiO labeled cells after explantation. Immunohistochemical assessment of foreign body reaction and tissue integration were conducted. Total collagen and the levels of collagens type III and type I were determined. Uniaxial tensiometry was performed on explanted meshes, originally seeded with and without cells, at days 7 and 90.

RESULTS

Implanted meshes were well tolerated, with labeled cells detected on the mesh up to 14 days postimplantation. Meshes with cells promoted significantly more neovascularization at 7 days (p<0.05) and attracted fewer macrophages at 90 days (p<0.05). Similarly, leukocyte infiltration was significantly lower in the cell-seeded meshes at 90 days (p<0.05). Meshes with cells were generally less stiff than those without cells, after 7 and 90 days implantation.

CONCLUSION

The TE approach used in this study significantly reduced the number of inflammatory cells around the implanted mesh and promoted neovascularization. Seeding with eMSC exerts an anti-inflammatory effect and promotes wound repair with new tissue growth and minimal fibrosis, and produces mesh with greater extensibility. Cell seeding onto polyamide/gelatin mesh improves mesh biocompatibility and may be an alternative option for future treatment of POP.

Toward the use of endometrial and menstrual blood mesenchymal stem cells for cell-based therapies

INTRODUCTION

Bone marrow is a widely used source of mesenchymal stem cells (MSCs) for cell-based therapies. Recently, endometrium - the highly regenerative lining of the uterus - and menstrual blood have been identified as more accessible sources of MSCs. These uterine MSCs include two related cell types: endometrial MSCs (eMSCs) and endometrial regenerative cells (ERCs).

AREAS COVERED

The properties of eMSCs and ERCs and their application in preclinical in vitro and in vivo studies for pelvic organ prolapse, heart disorders and ischemic conditions are reviewed. Details of the first clinical Phase I and Phase II studies will be provided.

EXPERT OPINION

The authors report that eMSCs and ERCs are a readily available source of adult stem cells. Both eMSCs and ERCs fulfill the key MSC criteria and have been successfully used in preclinical models to treat various diseases. Data on clinical trials are sparse. More research is needed to determine the mechanism of action of eMSCs and ERCs in these regenerative medicine models and to determine the long-term benefits and any adverse effects after their administration.

Characterisation of clinical and newly fabricated meshes for pelvic organ prolapse repair

Clinical meshes used in pelvic organ prolapse (POP) repair are predominantly manufactured from monofilament polypropylene (PP). Complications from the use of these meshes in transvaginal kits, including mesh exposure and pain, have prompted two public health notifications by the FDA. The aim of this study was to compare several clinical PP POP meshes to new fabricated POP meshes, knitted from alternative polymers, for their mechanical properties using standard and clinically relevant multi-axial testing methods. Five new meshes were warp knitted to different architectures and weights from polyamide and polyetheretherketone monofilaments. A composite mesh of a polyamide mesh incorporating a gelatin layer was also fabricated to enable the potential delivery of cells on these meshes. Meshes were assessed for their structural characteristics and mechanical properties, using uniaxial stiffness, permanent strain, bending rigidity and multi-axial burst strength methods. Results were compared to three clinical urogynaecological polypropylene meshes: Polyform®, Gynemesh(TM)PS, and IntePro®. New fabricated meshes were uniaxially less stiff (less than 0.24 N/mm and 1.20 N/mm in toe and linear regions, respectively) than the Gynemesh (0.48 N/mm and 2.08 N/mm in toe and linear regions, respectively) and IntePro (0.57 N/mm in toe region) clinical meshes, with the gelatin coated PA mesh exhibiting lower permanent strain than Polyform clinical mesh (8.1% vs. 23.5%). New meshes had lower burst stiffness than Polyform (less than 16.9 N/mm for new meshes and 26.6N/mm for Polyform). Within the new mesh prototypes, the PA meshes, either uncoated (4.7-5.7 μN m) or with gelatin coating (16.7 μN m) possessed lower bending rigidity than both Polyform and Gynemesh (46.2 μN m and 36.4 μN m, respectively). The new fabricated mesh designs were of similar architecture, but with some improved mechanical properties, compared to clinical POP meshes. Multi-axial analysis of new and clinical mesh designs provides greater discriminatory power in analysing mesh mechanical properties for clinical applications.