Light driven CO2 fixation by using cyanobacterial photosystem I and NADPH-dependent formate dehydrogenase

Chlamydomonas reinhardtii chloroplast factory construction for formate bioconversion

The photosynthetic autotrophic production of microalgae is limited by the effective supply of carbon and light energy, and the production efficiency is lower than the theoretical value. Represented by methanol, C1 compounds have been industrially produced by artificial photosynthesis with a solar energy efficiency over 10%, but the complexity of artificial products is weak. Here, based on a construction of chloroplast factory, green microalgae Chlamydomonas reinhardtii CC137c was modified for the bioconversion of formate for biomass production. By screening the optimal combination of chloroplast transport peptides, the cabII-1 cTP1 fusion formate dehydrogenase showed significant enhancement on the conversion of formate with a better performance in the maintenance of light reaction activity. This work provided a new way to obtain bioproducts from solar energy and CO2 with potentially higher-than-nature efficiency by the artificial-natural hybrid photosynthesis.

Creating NADP+ -Specific Formate Dehydrogenases from Komagataella phaffii by Enzymatic Engineering

Most natural formate dehydrogenases (FDHs) exhibit NAD+ specificity, making it imperative to explore the engineering of FDH cofactor specificity for NADPH regeneration systems. The endogenous FDH of Komagataella phaffii (K. phaffii), termed KphFDH, is a typical NAD+ -specific FDH. However, investigations into engineering the cofactor specificity of KphFDH have yet to be conducted. To develop an NADP+ -specific variant of KphFDH, we selected D195, Y196, and Q197 as mutation sites and generated twenty site-directed variants. Through kinetic characterization, KphFDH/V19 (D195Q/Y196R/Q197H) was identified as the variant with the highest specificity towards NADP+ , with a ratio of catalytic efficiency (kcat /KM )NADP+ /(kcat /KM )NAD+ of 129.226. Studies of enzymatic properties revealed that the optimal temperature and pH for the reduction reaction of NADP+ catalyzed by KphFDH/V19 were 45 °C and 7.5, respectively. The molecular dynamics (MD) simulation was performed to elucidate the mechanism of high catalytic activity of KphFDH/V19 towards NADP+ . Finally, KphFDH/V19 was applied to an in vitro NADPH regeneration system with Meso-diaminopimelate dehydrogenase from Symbiobacterium thermophilum (StDAPDH/H227V). This study successfully created a KphFDH variant with high NADP+ specificity and demonstrated its practical applicability in an in vitro NADPH regeneration system.

Changing the Electron Acceptor Specificity of Rhodobacter capsulatus Formate Dehydrogenase from NAD+ to NADP. Int J Mol Sci 2023;24:16067. [PMID: 38003259 PMCID: PMC10671435 DOI: 10.3390/ijms242216067] [Citation(s) in RCA: 0] [Impact Index Per Article: 0]

Formate dehydrogenases catalyze the reversible oxidation of formate to carbon dioxide. These enzymes play an important role in CO2 reduction and serve as nicotinamide cofactor recycling enzymes. More recently, the CO2-reducing activity of formate dehydrogenases, especially metal-containing formate dehydrogenases, has been further explored for efficient atmospheric CO2 capture. Here, we investigate the nicotinamide binding site of formate dehydrogenase from Rhodobacter capsulatus for its specificity toward NAD+ vs. NADP+ reduction. Starting from the NAD+-specific wild-type RcFDH, key residues were exchanged to enable NADP+ binding on the basis of the NAD+-bound cryo-EM structure (PDB-ID: 6TG9). It has been observed that the lysine at position 157 (Lys157) in the β-subunit of the enzyme is essential for the binding of NAD+. RcFDH variants that had Glu259 exchanged for either a positively charged or uncharged amino acid had additional activity with NADP+. The FdsBL279R and FdsBK276A variants also showed activity with NADP+. Kinetic parameters for all the variants were determined and tested for activity in CO2 reduction. The variants were able to reduce CO2 using NADPH as an electron donor in a coupled assay with phosphite dehydrogenase (PTDH), which regenerates NADPH. This makes the enzyme suitable for applications where it can be coupled with other enzymes that use NADPH.

Artificial photosynthetic cells with biotic-abiotic hybrid energy modules for customized CO2 conversion

Programmable artificial photosynthetic cell is the ultimate goal for mimicking natural photosynthesis, offering tunable product selectivity via reductase selection toward device integration. However, this concept is limited by the capacity of regenerating the multiple cofactors that hold the key to various reductases. Here, we report the design of artificial photosynthetic cells using biotic-abiotic thylakoid-CdTe as hybrid energy modules. The rational integration of thylakoid with CdTe quantum dots substantially enhances the regeneration of bioactive NADPH, NADH and ATP cofactors without external supplements by promoting proton-coupled electron transfer. Particularly, this approach turns thylakoid highly active for NADH regeneration, providing a more versatile platform for programming artificial photosynthetic cells. Such artificial photosynthetic cells can be programmed by coupling with diverse reductases, such as formate dehydrogenase and remodeled nitrogenase for highly selective production of formate or methane, respectively. This work opens an avenue for customizing artificial photosynthetic cells toward multifarious demands for CO2 conversion.

One-Pot Biocatalytic Synthesis of Primary, Secondary, and Tertiary Amines with Two Stereocenters from α,β-Unsaturated Ketones Using Alkyl-Ammonium Formate

The efficient asymmetric catalytic synthesis of amines containing more than one stereogenic center is a current challenge. Here, we present a biocatalytic cascade that combines ene-reductases (EReds) with imine reductases/reductive aminases (IReds/RedAms) to enable the conversion of α,β-unsaturated ketones into primary, secondary, and tertiary amines containing two stereogenic centers in very high chemical purity (up to >99%), a diastereomeric ratio, and an enantiomeric ratio (up to >99.8:<0.2). Compared with previously reported strategies, our strategy could synthesize two, three, or even all four of the possible stereoisomers of the amine products while precluding the formation of side-products. Furthermore, ammonium or alkylammonium formate buffer could be used as the only additional reagent since it acted both as an amine donor and as a source of reducing equivalents. This was achieved through the implementation of an NADP-dependent formate dehydrogenase (FDH) for the in situ recycling of the NADPH coenzyme, thus leading to increased atom economy for this biocatalytic transformation. Finally, this dual-enzyme ERed/IRed cascade also exhibits a complementarity with the recently reported EneIRED enzymes for the synthesis of cyclic six-membered ring amines. The ERed/IRed method yielded trans-1,2 and cis-1,3 substituted cyclohexylamines in high optical purities, whereas the EneIRED method was reported to yield one cis-1,2 and one trans-1,3 enantiomer. As a proof of concept, when 3-methylcyclohex-2-en-1-one was converted into secondary and tertiary chiral amines with different amine donors, we could obtain all the four possible stereoisomer products. This result exemplifies the versatility of this method and its potential for future wider utilization in asymmetric synthesis by expanding the toolbox of currently available dehydrogenases via enzyme engineering and discovery.

Synthetic Biology Approaches for Improving Chemical Production in Cyanobacteria

Biological chemical production has gained traction in recent years as a promising renewable alternative to traditional petrochemical based synthesis. Of particular interest in the field of metabolic engineering are photosynthetic microorganisms capable of sequestering atmospheric carbon dioxide. CO₂ levels have continued to rise at alarming rates leading to an increasingly uncertain climate. CO₂ can be sequestered by engineered photosynthetic microorganisms and used for chemical production, representing a renewable production method for valuable chemical commodities such as biofuels, plastics, and food additives. The main challenges in using photosynthetic microorganisms for chemical production stem from the seemingly inherent limitations of carbon fixation and photosynthesis resulting in slower growth and lower average product titers compared to heterotrophic organisms. Recently, there has been an increase in research around improving photosynthetic microorganisms as renewable chemical production hosts. This review will discuss the various efforts to overcome the intrinsic inefficiencies of carbon fixation and photosynthesis, including rewiring carbon fixation and photosynthesis, investigating alternative carbon fixation pathways, installing sugar catabolism to supplement carbon fixation, investigating newly discovered fast growing photosynthetic species, and using new synthetic biology tools such as CRISPR to radically alter metabolism.

Rewiring cyanobacterial photosynthesis by the implementation of an oxygen-tolerant hydrogenase

Molecular hydrogen (H₂) is considered as an ideal energy carrier to replace fossil fuels in future. Biotechnological H₂ production driven by oxygenic photosynthesis appears highly promising, as biocatalyst and H₂ syntheses rely mainly on light, water, and CO₂ and not on rare metals. This biological process requires coupling of the photosynthetic water oxidizing apparatus to a H₂-producing hydrogenase. However, this strategy is impeded by the simultaneous release of oxygen (O₂) which is a strong inhibitor of most hydrogenases. Here, we addressed this challenge, by the introduction of an O₂-tolerant hydrogenase into phototrophic bacteria, namely the cyanobacterial model strain Synechocystis sp. PCC 6803. To this end, the gene cluster encoding the soluble, O₂-tolerant, and NAD(H)-dependent hydrogenase from Ralstonia eutropha (ReSH) was functionally transferred to a Synechocystis strain featuring a knockout of the native O₂ sensitive hydrogenase. Intriguingly, photosynthetically active cells produced the O₂ tolerant ReSH, and activity was confirmed in vitro and in vivo. Further, ReSH enabled the constructed strain Syn_ReSH⁺ to utilize H₂ as sole electron source to fix CO₂. Syn_ReSH⁺ also was able to produce H₂ under dark fermentative conditions as well as in presence of light, under conditions fostering intracellular NADH excess. These findings highlight a high level of interconnection between ReSH and cyanobacterial redox metabolism. This study lays a foundation for further engineering, e.g., of electron transfer to ReSH via NADPH or ferredoxin, to finally enable photosynthesis-driven H₂ production.

Protein Engineering of the Soluble Metal-dependent Formate Dehydrogenase from Escherichia coli

Formate is the most targeted C1 building block and electron carrier in the post-petroleum era. Formate dehydrogenase (FDH), which catalyzes the production or degradation of formate, has acquired considerable attention. Among FDHs, a metal-dependent FDH that carries a complex active center, molybdenum-pterin cofactor, can directly transfer electrons from formate to other redox proteins without generating NAD(P)H. Previously, we reported an expression system for membrane-bound metal-dependent FDH from E. coli (encoded by the fdoG-fdoH-fdoI operon) and succeeded in its conversion to a soluble protein. However, this protein exhibited a too low stability to be purified and analyzed biochemically. In this study, we tried to improve the stability of heterologously expressed FDH through rational and irrational approaches. As a result, a mutant with the highest specific activity was obtained through a rational approach. This study not only yielded a promising FDH enzyme with enhanced activity and stability for industrial applications, but also offered relevant insights for the handling of recombinant large proteins.

In Vivo Selection for Formate Dehydrogenases with High Efficiency and Specificity toward NADP. ACS Catal 2020;10:7512-7525. [PMID: 32733773 PMCID: PMC7384739 DOI: 10.1021/acscatal.0c01487]

The efficient regeneration of cofactors is vital for the establishment of biocatalytic processes. Formate is an ideal electron donor for cofactor regeneration due to its general availability, low reduction potential, and benign byproduct (CO₂). However, formate dehydrogenases (FDHs) are usually specific to NAD⁺, such that NADPH regeneration with formate is challenging. Previous studies reported naturally occurring FDHs or engineered FDHs that accept NADP⁺, but these enzymes show low kinetic efficiencies and specificities. Here, we harness the power of natural selection to engineer FDH variants to simultaneously optimize three properties: kinetic efficiency with NADP⁺, specificity toward NADP⁺, and affinity toward formate. By simultaneously mutating multiple residues of FDH from Pseudomonas sp. 101, which exhibits practically no activity toward NADP⁺, we generate a library of >10⁶ variants. We introduce this library into an E. coli strain that cannot produce NADPH. By selecting for growth with formate as the sole NADPH source, we isolate several enzyme variants that support efficient NADPH regeneration. We find that the kinetically superior enzyme variant, harboring five mutations, has 5-fold higher efficiency and 14-fold higher specificity in comparison to the best enzyme previously engineered, while retaining high affinity toward formate. By using molecular dynamics simulations, we reveal the contribution of each mutation to the superior kinetics of this variant. We further determine how nonadditive epistatic effects improve multiple parameters simultaneously. Our work demonstrates the capacity of in vivo selection to identify highly proficient enzyme variants carrying multiple mutations which would be almost impossible to find using conventional screening methods.

Protein engineering for bioreduction of carboxylic acids

Carboxylic acids (CAs) are widespread in Nature. A prominent example is fatty acids, a major constituent of lipids. CAs are potentially economical precursors for bio-based products such as bio-aldehydes and bio-alcohols. However, carboxylate reduction is a challenging chemical transformation due to the thermodynamic stability of carboxylate. Carboxylic acid reductases (CARs), found in bacteria and fungi, offer a good solution to this challenge. These enzymes catalyse the NADPH- and ATP-dependent reduction of aliphatic and aromatic CAs. This review summarised all the protein engineering work that has been done on these versatile biocatalysts to date. The intricate catalytic mechanism and structure of CARs prompted us to first examine their domain architecture to facilitate the subsequent discussion of various protein engineering strategies. This then led to a survey of assays to detect aldehyde formation and to monitor aldenylation activity. Strategies for NADPH and ATP regeneration were also incorporated, as they are deemed vital to developing preparative-scale biocatalytic process and high-throughput screening systems. The objectives of the review are to consolidate CAR engineering research, stimulate interest, discussion or debate, and advance the field of bioreduction.

Photoreduction of CO2 with a Formate Dehydrogenase Driven by Photosystem II Using a Semi-artificial Z-Scheme Architecture

Solar-driven coupling of water oxidation with CO₂ reduction sustains life on our planet and is of high priority in contemporary energy research. Here, we report a photoelectrochemical tandem device that performs photocatalytic reduction of CO₂ to formate. We employ a semi-artificial design, which wires a W-dependent formate dehydrogenase (FDH) cathode to a photoanode containing the photosynthetic water oxidation enzyme, Photosystem II, via a synthetic dye with complementary light absorption. From a biological perspective, the system achieves a metabolically inaccessible pathway of light-driven CO₂ fixation to formate. From a synthetic point of view, it represents a proof-of-principle system utilizing precious-metal-free catalysts for selective CO₂-to-formate conversion using water as an electron donor. This hybrid platform demonstrates the translatability and versatility of coupling abiotic and biotic components to create challenging models for solar fuel and chemical synthesis.

Design and characterization of a synthetic minimal promoter for heterocyst-specific expression in filamentous cyanobacteria

Short and well defined promoters are essential for advancing cyanobacterial biotechnology. The heterocyst of Nostoc sp. is suggested as a microbial cell factory for oxygen sensitive catalysts, such as hydrogenases for hydrogen production, due to its microoxic environment. We identified and predicted promoter elements of possible significance through a consensus strategy using a pool of heterocyst-induced DIF⁺ promoters known from Anabaena sp. PCC 7120. To test if these conserved promoter elements were crucial for heterocyst-specific expression, promoter-yfp reporter constructs were designed. The characterization was accomplished by replacing, -35 and -10 regions and the upstream element, with well described elements from the trc promoter of Escherichia coli, which is also functional in Nostoc sp. From the in vivo spatial fluorescence of the different promoter-yfp reporters in Nostoc punctiforme ATCC 29133, we concluded that both the consensus -35 and extended -10 regions were important for heterocyst-specific expression. Further that the promoter strength could be improved by the addition of an upstream element. We designed a short synthetic promoter of 48 nucleotides, P_synDIF, including a consensus DIF1 sequence, a 17 base pair stretch of random nucleotides and an extended consensus -10 region, and thus generated the shortest promoter for heterocyst-specific expression to date.

Production of Industrial Chemicals from CO2 by Engineering Cyanobacteria

As photosynthetic prokaryotes, cyanobacteria can directly convert CO₂ to organic compounds and grow rapidly using sunlight as the sole source of energy. The direct biosynthesis of chemicals from CO₂ and sunlight in cyanobacteria is therefore theoretically more attractive than using glucose as carbon source in heterotrophic bacteria. To date, more than 20 different target chemicals have been synthesized from CO₂ in cyanobacteria. However, the yield and productivity of the constructed strains is about 100-fold lower than what can be obtained using heterotrophic bacteria, and only a few products reached the gram level. The main bottleneck in optimizing cyanobacterial cell factories is the relative complexity of the metabolism of photoautotrophic bacteria. In heterotrophic bacteria, energy metabolism is integrated with the carbon metabolism, so that glucose can provide both energy and carbon for the synthesis of target chemicals. By contrast, the energy and carbon metabolism of cyanobacteria are separated. First, solar energy is converted into chemical energy and reducing power via the light reactions of photosynthesis. Subsequently, CO₂ is reduced to organic compounds using this chemical energy and reducing power. Finally, the reduced CO₂ provides the carbon source and chemical energy for the synthesis of target chemicals and cell growth. Consequently, the unique nature of the cyanobacterial energy and carbon metabolism determines the specific metabolic engineering strategies required for these organisms. In this chapter, we will describe the specific characteristics of cyanobacteria regarding their metabolism of carbon and energy, summarize and analyze the specific strategies for the production of chemicals in cyanobacteria, and propose metabolic engineering strategies which may be most suitable for cyanobacteria.

Holistic bioengineering: rewiring central metabolism for enhanced bioproduction

What does it take to convert a living organism into a truly productive biofactory? Apart from optimizing biosynthesis pathways as standalone units, a successful bioengineering approach must bend the endogenous metabolic network of the host, and especially its central metabolism, to support the bioproduction process. In practice, this usually involves three complementary strategies which include tuning-down or abolishing competing metabolic pathways, increasing the availability of precursors of the desired biosynthesis pathway, and ensuring high availability of energetic resources such as ATP and NADPH. In this review, we explore these strategies, focusing on key metabolic pathways and processes, such as glycolysis, anaplerosis, the TCA (tricarboxylic acid) cycle, and NADPH production. We show that only a holistic approach for bioengineering — considering the metabolic network of the host organism as a whole, rather than focusing on the production pathway alone — can truly mold microorganisms into efficient biofactories.

Exploring Bacterial Carboxylate Reductases for the Reduction of Bifunctional Carboxylic Acids

Carboxylic acid reductases (CARs) selectively reduce carboxylic acids to aldehydes using ATP and NADPH as cofactors under mild conditions. Although CARs attracts significant interest, only a few enzymes have been characterized to date, whereas the vast majority of CARs have yet to be examined. Herein the authors report that 12 bacterial CARs reduces a broad range of bifunctional carboxylic acids containing oxo-, hydroxy-, amino-, or second carboxyl groups with several enzymes showing activity toward 4-hydroxybutanoic (4-HB) and adipic acids. These CARs exhibits significant reductase activity against substrates whose second functional group is separated from the carboxylate by at least three carbons with both carboxylate groups being reduced in dicarboxylic acids. Purified CARs supplemented with cofactor regenerating systems (for ATP and NADPH), an inorganic pyrophosphatase, and an aldo-keto reductase catalyzes a high conversion (50-76%) of 4-HB to 1,4-butanediol (1,4-BDO) and adipic acid to 1,6-hexanediol (1,6-HDO). Likewise, Escherichia coli strains expressing eight different CARs efficiently reduces 4-HB to 1,4-BDO with 50-95% conversion, whereas adipic acid is reduced to a mixture of 6-hydroxyhexanoic acid (6-HHA) and 1,6-HDO. Thus, our results illustrate the broad biochemical diversity of bacterial CARs and their compatibility with other enzymes for applications in biocatalysis.

CO2 Photoreduction by Formate Dehydrogenase and a Ru-Complex in a Nanoporous Glass Reactor

In this study, we demonstrated the conversion of CO₂ to formic acid under ambient conditions in a photoreduction nanoporous reactor using a photosensitizer, methyl viologen (MV²⁺), and formate dehydrogenase (FDH). The overall efficiency of this reactor was 14 times higher than that of the equivalent solution. The accumulation rate of formic acid in the nanopores of 50 nm is 83 times faster than that in the equivalent solution. Thus, this CO₂ photoreduction nanoporous glass reactor will be useful as an artificial photosynthesis system that converts CO₂ to fuel.

Structural basis for double cofactor specificity in a new formate dehydrogenase from the acidobacterium Granulicella mallensis MP5ACTX8

Formate dehydrogenases (FDHs) are considered particularly useful enzymes in biocatalysis when the regeneration of the cofactor NAD(P)H is required, that is, in chiral synthesis with dehydrogenases. Their utilization is however limited to the recycling of NAD(+), since all (apart one) of the FDHs characterized so far are strictly specific for this cofactor, and this is a major drawback for their otherwise wide applicability. Despite the many attempts performed to modify cofactor specificity by protein engineering different NAD(+)-dependent FDHs, in the general practice, glucose or phosphite dehydrogenases are chosen for the recycling of NADP(+). We report on the functional and structural characterization of a new FDH, GraFDH, identified by mining the genome of the extremophile prokaryote Granulicella mallensis MP5ACTX8. The new enzyme displays a valuable stability in the presence of many organic cosolvents as well as double cofactor specificity, with NADP(+) preferred over NAD(+) at acidic pH values, at which it also shows the highest stability. The quite low affinities for both cofactors as well as for the substrate formate indicate, however, that the native enzyme requires optimization to be applied as biocatalytic tool. We also determined the crystal structure of GraFDH both as apoprotein and as holoprotein, either in complex with NAD(+) or NADP(+). Noticeably, the latter represents the first structure of an FDH enzyme in complex with NADP(+). This fine picture of the structural determinants involved in cofactor selectivity will possibly boost protein engineering of the new enzyme or other homolog FDHs in view of their biocatalytic exploitation for NADP(+) recycling.

Metabolic engineering of carbon and redox flow in the production of small organic acids

The review describes efforts toward metabolic engineering of production of organic acids. One aspect of the strategy involves the generation of an appropriate amount and type of reduced cofactor needed for the designed pathway. The ability to capture reducing power in the proper form, NADH or NADPH for the biosynthetic reactions leading to the organic acid, requires specific attention in designing the host and also depends on the feedstock used and cell energetic requirements for efficient metabolism during production. Recent work on the formation and commercial uses of a number of small mono- and diacids is discussed with redox differences, major biosynthetic precursors and engineering strategies outlined. Specific attention is given to those acids that are used in balancing cell redox or providing reduction equivalents for the cell, such as formate, which can be used in conjunction with metabolic engineering of other products to improve yields. Since a number of widely studied acids derived from oxaloacetate as an important precursor, several of these acids are covered with the general strategies and particular components summarized, including succinate, fumarate and malate. Since malate and fumarate are less reduced than succinate, the availability of reduction equivalents and level of aerobiosis are important parameters in optimizing production of these compounds in various hosts. Several other more oxidized acids are also discussed as in some cases, they may be desired products or their formation is minimized to afford higher yields of more reduced products. The placement and connections among acids in the typical central metabolic network are presented along with the use of a number of specific non-native enzymes to enhance routes to high production, where available alternative pathways and strategies are discussed. While many organic acids are derived from a few precursors within central metabolism, each organic acid has its own special requirements for high production and best compatibility with host physiology.

Molybdenum-containing membrane-bound formate dehydrogenase isolated from Citrobacter sp. S-77 having high stability against oxygen, pH, and temperature

Membrane-bound formate dehydrogenase (FDH) was purified to homogeneity from a facultative anaerobic bacterium Citrobacter sp. S-77. The FDH from Citrobacter sp. S-77 (FDHS77) was a monomer with molecular mass of approximately 150 kDa. On SDS-PAGE, the purified FDHS77 showed as three different protein bands with molecular mass of approximately 95, 87, and 32 kDa, respectively. Based on the N-terminal amino acid sequence analysis, the sequence alignments observed for the 87 kDa protein band were identical to that of the large subunit of 95 kDa, indicating that the purified FDHS77 consisted of two subunits; a 95 kDa large subunit and a 32 kDa small subunit. The purified FDHS77 in this purification did not contain a heme b subunit, but the FDHS77 showed significant activity for formate oxidation, determined by the Vmax of 30.4 U/mg using benzyl viologen as an electron acceptor. The EPR and ICP-MS spectra indicate that the FDHS77 is a molybdenum-containing enzyme, displaying a remarkable O2-stability along with thermostability and pH resistance. This is the first report of the purification and characterization of a FDH from Citrobacter species.