Fine-tuning the antimicrobial profile of biocompatible gold nanoparticles by sequential surface functionalization using polyoxometalates and lysine

Aptamer-controlled gold nanozyme sensor for fluorescent and colorimetric dual-channel detection of methamphetamine

Methamphetamine (METH) is the second abused drug which affects abusers' health and induces social crimes, developing novel methods with high sensitivity and selectivity for METH detecting is still challenging. In this paper, a colorimetric and fluorescent dual-channel sensor for METH has been constructed. We combine the enzyme-mimic catalytic activity of gold nanoparticles (GNPs) with high target specificity of METH aptamer to create a nanosensor (Apt-GNP), in the presence of METH, the absorption of 3,3',5,5'-tetramethylbenzidine (OxTMB) at 650 nm enhanced with METH concentration increasing, while the absorption characteristic peak of GNPs at 530 nm remained almost unchanged. The ratio of A650nm/A530nm and METH concentration had a good linear relationship when METH concentration was in the range of 5-50 μM, and the corresponding linear equation is A650nm/A530nm = 0.00727CMETH (μM) + 0.783 with R2 = 0.997 and LOD = 0.40 μM (LOD = 3σ/s, n = 11). Interestingly, the fluorescence emission of Rhodamine B (RB) overlaps with the absorption spectrum of OxTMB which represents the content of METH and the fluorescence signal of RB can be quenched through internal filtering effect (IEF). Hence, when RB was doped to the detection system, the decay of RB fluorescence can reflect the concentrations change of METH. Accordingly, the linear equation is F/FR = -0.00751CMETH (μM) + 0.895 with R2 = 0.993 and LOD = 0.40 μM, where F was the fluorescence of the analytical solution at 580 nm with METH and FR was fluorescence of RB control solution. The dual-channel sensor can measure METH in serum and artificial urine successfully which is potential to be applied in drug-using crime sites and provide direct evidence to law enforcement officials.

Fibrillation of Human Serum Albumin Differentially Affected by Asp-, Arg-, and Tyr-Capped Gold Nanoparticles

Fibrillation of proteins is associated with a number of debilitating diseases, including various neurodegenerative disorders. Prevention of the protein fibrillation process is therefore of immense importance. We investigated the effect of amino acid-capped AuNPs on the prevention of the fibrillation process of human serum albumin (HSA), a model protein. Amino acid-capped AuNPs of varying sizes and agglomeration extents were synthesized under physiological conditions. The AuNPs were characterized by their characteristic surface plasmon resonance (SPR), and their interactions with HSA were investigated through emission spectroscopy in addition to circular dichroism (CD) spectral analyses. Fluorescence lifetime imaging (FLIM) as well as transmission electron microscopy (TEM) were used to observe the fibrillar network. Thermodynamic and kinetic analyses from CD and fluorescence emission spectra provided insights into the fibrillation pathway adopted by HSA in the presence of capped AuNPs. Kinetics of the fibrillation pathway followed by ThT fluorescence emission confirmed the sigmoidal nature of the process. The highest cooperativity was observed in the case of Asp-AuNPs with HSA. This was in accordance with the ΔG value obtained from the CD spectral analyses, where Arg-AuNPs with HSA showed the highest positive ΔG value and Asp-AuNPs with HSA showed the most negative ΔG value. The study provides information about the potential use of conjugate AuNPs to monitor the fibrillation process in proteins.

Engineered Nanomaterials for Immunomodulation: A Review

The immune system usually provides a defense against invading pathogenic microorganisms and any other particulate contaminants. Nonetheless, it has been recently reported that nanomaterials can evade the immune system and modulate immunological responses due to their unique physicochemical characteristics. Consequently, nanomaterial-based activation of immune components, i.e., neutrophils, macrophages, and other effector cells, may induce inflammation and alter the immune response. Here, it is essential to distinguish the acute and chronic modulations triggered by nanomaterials to determine the possible risks to human health. Nanomaterials size, shape, composition, surface charge, and deformability are factors controlling their uptake by immune cells and the resulting immune responses. The exterior corona of molecules adsorbed over nanomaterials surfaces also influences their immunological effects. Here, we review current nanoengineering trends for targeted immunomodulation with an emphasis on the design, safety, and potential toxicity of nanomaterials. First, we describe the characteristics of engineered nanomaterials that trigger immune responses. Then, the biocompatibility and immunotoxicity of nanoengineered particles are debated, because these factors influence applications. Finally, future nanomaterial developments in terms of surface modifications, synergistic approaches, and biomimetics are discussed.

Gold Nanoparticles Capped with a Novel Titanium(IV)-Containing Polyoxomolybdate Cluster: Selective and Enhanced Bactericidal Effect Against Escherichia coli

Bacterial infections are a public health threat of increasing concern in medical care systems; hence, the search for novel strategies to lower the use of antibiotics and their harmful effects becomes imperative. Herein, the antimicrobial performance of four polyoxometalate (POM)-stabilized gold nanoparticles (Au@POM) against Escherichia coli (E. coli) and Staphylococcus aureus (S. aureus) as Gram-negative and Gram-positive bacteria models, respectively, is studied. The bactericidal studies performed, both in planktonic and sessile forms, evidence the antimicrobial potential of these hybrid nanostructures with selectivity toward Gram-negative species. In particular, the Au@GeMoTi composite with the novel [Ti2 (HGeMo7 O28 )2 ]10- POM capping ligand exhibits outstanding bactericidal efficiency with a minimum inhibitory concentration of just 3.12 µm for the E. coli strain, thus outperforming the other three Au@POM counterparts. GeMoTi represents the fourth example of a water-soluble TiIV -containing polyoxomolybdate, and among them, the first sandwich-type structure having heteroatoms in high-oxidation state. The evaluation of the bactericidal mechanisms of action points to the cell membrane hyperpolarization, disruption, and subsequent nucleotide leakage and the low cytotoxicity exerted on five different cell lines at antimicrobial doses demonstrates the antibiotic-like character. These studies highlight the successful design and development of a new POM-based nanomaterial able to eradicate Gram-negative bacteria without damaging mammalian cells.

Cancer treatment and toxicity outlook of nanoparticles

Diversified nanosystems with tunable physicochemical attributes have emerged as potential solution to globally devastating cancer by offering novel possibilities for improving the techniques of cancer detection, imaging, therapies, diagnosis, drug delivery and treatment. Drug delivery systems based on nanoparticles (NPs) with ability of crossing different biological barriers are becoming increasingly popular. Besides, NPs are utilized in pharmaceutical sciences to mitigate the toxicity of conventional cancer therapeutics. However, significant NPs-associated toxicity, off-targeted activities, and low biocompatibility limit their utilization for cancer theranostics and can be hazardous to cancer patients up to life-threatening conditions. NPs interact with the biomolecules and disturb their regular function by aggregating inside cells and forming a protein corona, and the formulation turns ineffective in controlling cancer cell growth. The adverse interactions between NPs and biological entities can lead to life-threatening toxicities. This review focuses on the widespread use of various NPs including zinc oxide, titanium oxide, silver, and gold, which serve as efficient nano-vehicles and demonstrate notable pharmacokinetic and pharmacodynamic advantages in cancer therapy. Subsequently, the mechanism of nanotoxicity attached with these NPs, alternate solutions and their prospect to revolutionize cancer theranostics are highlighted. This review will serve as guide for future developments associated with high-performance NPs with controlled toxicity for establishing them as modern-age nanotools to manage cancer in tailored manner.

Silver-Gold Alloy Nanoparticles (AgAu NPs): Photochemical Synthesis of Novel Biocompatible, Bimetallic Alloy Nanoparticles and Study of Their In Vitro Peroxidase Nanozyme Activity

Facile synthesis of metal nanoparticles with controlled physicochemical properties using environment-friendly reagents can open new avenues in biomedical applications. Nanomaterials with controlled physicochemical properties have opened new prospects for a variety of applications. In the present study, we report a single-step photochemical synthesis of ~5 nm-sized silver (Ag) and gold (Au) nanoparticles (NPs), and Ag-Au alloy nanoparticles using L-tyrosine. The physicochemical and surface properties of both monometallic and bimetallic NPs were investigated by analytical, spectroscopic, and microscopic techniques. Our results also displayed an interaction between L-tyrosine and surface atoms that leads to the formation of AgAu NPs by preventing the growth and aggregation of the NPs. This method efficiently produced monodispersed NPs, with a narrow-sized distribution and good stability in an aqueous solution. The cytotoxicity assessment performed on breast cancer cell lines (MCF-7) revealed that the biofriendly L-tyrosine-capped AgNPs, AuNPs, and bimetallic AgAu NPs were biocompatible. Interestingly, AgAu NPs have also unveiled controlled cytotoxicity, cell viability, and in vitro peroxidase nanozyme activity reliant on metal composition and surface coating.

Advances in the design of amino acid and peptide synthesized gold nanoparticles for their applications

The field of therapeutics and diagnostics is advanced by nanotechnology-based approaches including the spatial-temporal release of drugs, targeted delivery, enhanced accumulation of drugs, immunomodulation, antimicrobial action, and high-resolution bioimaging, sensors and detection. Various compositions of nanoparticles (NPs) have been developed for biomedical applications; however, gold NPs (Au NPs) have attracted tremendous attention due to their biocompatibility, easy surface functionalization and quantification. Amino acids and peptides have natural biological activities as such, their activities enhance several folds in combination with NPs. Although peptides are extensively used to produce various functionalities of Au NPs, amino acids have also gained similar interests in producing amino acid-capped Au NPs due to the availability of amine, carboxyl and thiol functional groups. Henceforth, a comprehensive review is needed to timely bridge the synthesis and the applications of amino acid and peptide-capped Au NPs. This review aims to describe the synthesis mechanism of Au NPs using amino acids and peptides along with their applications in antimicrobial, bio/chemo-sensors, bioimaging, cancer therapy, catalysis, and skin regeneration. Moreover, the mechanisms of various activities of amino acid and peptide capped-Au NPs are presented. We believe this review will motivate researchers to better understand the interactions and long-term activities of amino acid and peptide-capped Au NPs for their success in various applications.

Synthesis and anti-HIV-1 activity evaluation of Keggin-type polyoxometalates with amino acid as organic cations

Polyoxometalates (POMs), as a class of multinuclear metal oxygen clusters, have promising biological activities. And their amino acid derivatives will lead to better pharmacological activity by the diversity in structures and properties. With reference to the anti-HIV-1 activities of PM-19 (K7PTi2W10O40) and its pyridinium derivatives, a series of novel Keggin-type POMs with amino acid as organic cations (A7PTi2W10O40) were synthesized by hydrothermal synthetic method. The final products were characterized by 1H NMR, Elemental analyzes and single crystal X-ray diffraction. All the synthesized compounds were obtained in the yields of 44.3-61.7% and evaluated the cytotoxicity and anti-HIV-1 activity in vitro. Compared with the reference compound PM-19, the target compounds had a lower toxicity to TZM-bl cells and a higher inhibitory activity against HIV-1. Among them, compound A3 showed higher anti-HIV-1 activity with IC50 of 0.11 nM than that of PM-19 with 4.68 nM. This study demonstrated that combination of Keggin-type POMs and amino acids can be a new strategy to enhance the anti-HIV-1 biological activity of POMs. All results will be expected to helpful for developing more potent and effective HIV-1 inhibitors.

Adaptive Responses of a Peroxidase-like Polyoxometalate-Based Tri-Assembly to Bacterial Microenvironment (BME) Significantly Improved the Anti-Bacterial Effects

The present study presents the tertiary assembly of a POM, peptide, and biogenic amine, which is a concept to construct new hybrid bio-inorganic materials for antibacterial applications and will help to promote the development of antivirus agents in the future. To achieve this, a Eu-containing polyoxometalate (EuW₁₀) was first co-assembled with a biogenic amine of spermine (Spm), which improved both the luminescence and antibacterial effect of EuW₁₀. Further introduction of a basic peptide from HPV E6, GL-22, induced more extensive enhancements, both of them being attributed to the cooperation and synergistic effects between the constituents, particularly the adaptive responses of assembly to the bacterial microenvironment (BME). Further intrinsic mechanism investigations revealed in detail that the encapsulation of EuW₁₀ in Spm and further GL-22 enhanced the uptake abilities of EuW₁₀ in bacteria, which further improved the ROS generation in BME via the abundant H₂O₂ involved there and significantly promoted the antibacterial effects.

Role of Tunable Gold Nanostructures in Cancer Nanotheranostics: Implications on Synthesis, Toxicity, Clinical Applications and Their Associated Opportunities and Challenges

The existing diagnosis and treatment modalities have major limitations related to their precision and capability to understand several stages of disease development. A superior therapeutic system consists of a multifunctional approach in early diagnosis of the disease with a simultaneous progressive cure, using a precise medical approach towards complex treatment. These challenges can be addressed via nanotheranostics and explore suitable approaches to improve health care. Nanotechnology in combination with theranostics as an unconventional platform paved the way for developing novel strategies and modalities leading to diagnosis and therapy for complex disease conditions, ranging from acute to chronic levels. Among the metal nanoparticles, gold nanoparticles are being widely used for theranostics due to their inherent non-toxic nature and plasmonic properties. The unique optical and chemical properties of plasmonic metal nanoparticles along with theranostics have led to a promising era of plausible early detection of disease conditions, and they enable real-time monitoring with enhanced non-invasive or minimally invasive imaging of several ailments. This review aims to highlight the improvement and advancement brought to nanotheranostics by gold nanoparticles in the past decade. The clinical use of the metal nanoparticles in nanotheranostics is explained, along with the future perspectives on addressing the key applications related to diagnostics and therapeutics, respectively. The scope of gold nanoparticles and their realistic potential to design a sophisticated theranostic system is discussed in detail, along with their implications in clinical advancements which are the needs of the hour. The review concluded with the challenges, opportunities, and implications on translational potential of using gold nanoparticles in nanotheranostics.

Recent Advances in Hybrid Materials of Metal Nanoparticles and Polyoxometalates

Polyoxometalates (POMs), anionic metal-oxygen nanoclusters that possess various composition-dependent properties, are widely used to modify the existing properties of metal nanoparticles and to endow them with new ones. Herein, we present an overview of recent advances in hybrid materials that consist of metal nanoparticles and POMs. Following a brief introduction on the inception of this area and its development, representative properties and applications of these materials in various fields such as electrochemistry, photochemistry, and catalysis are introduced. We discuss how the combination of two classic inorganic materials facilitates cooperative and synergistic behavior, and we also give personal perspectives on the future development of this field.

Nanozyme-based pollutant sensing and environmental treatment: Trends, challenges, and perspectives

Nanozymes are defined as nanomaterials exhibiting enzyme-like properties, and they possess both catalytic functions and nanomaterial's unique physicochemical characteristics. Due to the excellent stability and improved catalytic activity in comparison to natural enzymes, nanozymes have established a wide base for applications in environmental pollutants monitoring and remediation. Nanozymes have been applied in the detection of heavy metal ions, molecules, and organic compounds, both quantitatively and qualitatively. Additionally, within the natural environment, nanozymes can be employed for the degradation of organic and persistent pollutants such as antibiotics, phenols, and textile dyes. Further, the potential sphere of applications for nanozymes traverses from indoor air purification to anti-biofouling agents, and even they show promise in combatting pathogenic bacteria. However, nanozymes may have inherent toxicity, which can restrict their widespread utility. Thus, it is important to evaluate and monitor the interaction and transformation of nanozymes towards biosphere damage when employed within the natural environment in a cradle-to-grave manner, to assure their utmost safety. In this context, various studies have concluded that the green synthesis of nanozymes can efficiently overcome the toxicity limitations in real life applications, and nanozymes can be well utilized in the sensing and degradation of several toxic pollutants including metal ions, pesticides, and chemical warfare agents. In this seminal review, we have explored the great potential of nanozymes, whilst addressing a range of concerns, which have often been overlooked and currently restrict widespread applications and commercialization of nanozymes.

Gold Nanozymes: Smart Hybrids with Outstanding Applications

Nanozymes are nanostructured artificial enzymes that have attracted great attention among researchers because of their ability to mimic relevant biological reactions carried out by their natural counterparts, but with the capability to overcome natural enzymes’ drawbacks such as low thermostability or narrow substrate scope. The promising enzyme-like properties of these systems make nanozymes excellent candidates for innovative solutions in different scientific fields such as analytical chemistry, catalysis or medicine. Thus, nanozymes with different type of activities are of special interest owing to their versatility since they can reproduce several biological reactions according to the substrates and the environmental conditions. In this context, gold-based nanozymes are a representative example of multifunctional structures that can perform a great number of enzyme-like activities. In addition, the combination of gold-based materials with structures of organic and inorganic chemical nature yields even more powerful hybrid nanozymes, which enhance their activity by providing improved features. This review will carry out a deep insight into gold-based nanozymes, revisiting not only the different type of biological enzymatic reactions that can be achieved with these kinds of systems, but also structural features of some of the most relevant hybrid gold-based nanozymes described in the literature. This literature review will also provide a representative picture of the potential of these structures to solve future technological challenges.

Double functionalized haemocompatible silver nanoparticles control cell inflammatory homeostasis

Infection, trauma, and autoimmunity trigger tissue inflammation, often leading to pain and loss of function. Therefore, approaches to control inflammation based on nanotechnology principles are being developed in addition to available methods. The metal-based nanoparticles are particularly attractive due to the ease of synthesis, control over physicochemical properties, and facile surface modification with different types of molecules. Here, we report curcumin conjugated silver (Cur-Ag) nanoparticles synthesis, followed by their surface functionalization with isoniazid, tyrosine, and quercetin, leading to Cur-Ag^INH, Cur-Ag^Tyr, and Cur-Ag^Qrc nanoparticles, respectively. These nanoparticles possess radical scavenging capacity, haemocompatibility, and minimal cytotoxicity to macrophages. Furthermore, the nanoparticles inhibited the secretion of pro-inflammatory cytokines such as interleukin-6, tumor necrosis factor-α, and interleukin-1β from macrophages stimulated by lipopolysaccharide (LPS). The findings reveal that the careful design of surface corona of nanoparticles could be critical to increasing their efficacy in biomedical applications.

Promising application of polyoxometalates in the treatment of cancer, infectious diseases and Alzheimer's disease

As shown in studies conducted in recent decades, polyoxometalates (POMs), as inorganic metal oxides, have promising biological activities, including antitumor, anti-infectious and anti-Alzheimer’s activities, due to their special structures and properties. However, some side effects impede their clinical applications to a certain extent. Compared with unmodified POMs, POM-based inorganic–organic hybrids and POM-based nanocomposite structures show significantly enhanced bioactivity and reduced side effects. In this review, we introduce the biological activities of POMs and their derivatives and highlight the side effects of POMs on normal cells and organisms and their possible mechanisms of action. We then propose a development direction for overcoming their side effects. POMs are expected to constitute a new generation of inorganic metal drugs for the treatment of cancer, infectious diseases, and Alzheimer's disease.

Graphical abstract

Smart nanomaterials for cancer diagnosis and treatment

Innovations in nanomedicine has guided the improved outcomes for cancer diagnosis and therapy. However, frequent use of nanomaterials remains challenging due to specific limitations like non-targeted distribution causing low signal-to-noise ratio for diagnostics, complex fabrication, reduced-biocompatibility, decreased photostability, and systemic toxicity of nanomaterials within the body. Thus, better nanomaterial-systems with controlled physicochemical and biological properties, form the need of the hour. In this context, smart nanomaterials serve as promising solution, as they can be activated under specific exogenous or endogenous stimuli such as pH, temperature, enzymes, or a particular biological molecule. The properties of smart nanomaterials make them ideal candidates for various applications like biosensors, controlled drug release, and treatment of various diseases. Recently, smart nanomaterial-based cancer theranostic approaches have been developed, and they are displaying better selectivity and sensitivity with reduced side-effects in comparison to conventional methods. In cancer therapy, the smart nanomaterials-system only activates in response to tumor microenvironment (TME) and remains in deactivated state in normal cells, which further reduces the side-effects and systemic toxicities. Thus, the present review aims to describe the stimulus-based classification of smart nanomaterials, tumor microenvironment-responsive behaviour, and their up-to-date applications in cancer theranostics. Besides, present review addresses the development of various smart nanomaterials and their advantages for diagnosing and treating cancer. Here, we also discuss about the drug targeting and sustained drug release from nanocarriers, and different types of nanomaterials which have been engineered for this intent. Additionally, the present challenges and prospects of nanomaterials in effective cancer diagnosis and therapeutics have been discussed.

Nanomaterials: The New Antimicrobial Magic Bullet

Bacterial infections are a significant cause of mortality and morbidity worldwide, despite decades of use of numerous existing antibiotics and constant efforts by researchers to discover new antibiotics. The emergence of infections associated with antibiotic-resistant bacterial strains, has amplified the pressure to develop additional bactericidal therapies or new unorthodox approaches that can deal with antimicrobial resistance. Nanomaterial-based strategies, particularly those that do not rely on conventional small-molecule antibiotics, offer promise in part due to their ability to dodge existing mechanisms used by drug-resistant bacteria. Therefore, the use of nanomaterial-based formulations has attracted attention in the field of antibiotic therapy. In this Review, we highlight novel and emerging nanomaterial-based formulations along with details about the mechanisms by which nanoparticles can target bacterial infections and antimicrobial resistance. A detailed discussion about types and the activities of nanoparticles is presented, along with how they can be used as either delivery systems or as inherent antimicrobials, or a combination of both. Lastly, we highlight some toxicological concerns for the use of nanoparticles in antibiotic therapies.

Gold nanoparticle-based optical nanosensors for food and health safety monitoring: recent advances and future perspectives

Modern society has been facing serious health-related problems including food safety, diseases and illness. Hence, it is urgent to develop analysis methods for the detection and control of food contaminants, disease biomarkers and pathogens. As the traditional instrumental methods have several disadvantages, including being time consuming, and having high cost and laborious procedures, optical nanosensors have emerged as promising alternative or complementary approaches to those traditional ones. With the advantages of simple preparation, high surface-to-volume ratio, excellent biocompatibility, and especially, unique optical properties, gold nanoparticles (AuNPs) have been demonstrated as excellent transducers for optical sensing systems. Herein, we provide an overview of the synthesis of AuNPs and their excellent optical properties that are ideal for the development of optical nanosensors based on local surface plasmon resonance (LSPR), colorimetry, fluorescence resonance energy transfer (FRET), and surface-enhanced Raman scattering (SERS) phenomena. We also review the sensing strategies and their mechanisms, as well as summarizing the recent advances in the monitoring of food contaminants, disease biomarkers and pathogens using developed AuNP-based optical nanosensors in the past seven years (2015-now). Furthermore, trends and challenges in the application of these nanosensors in the determination of those analytes are discussed to suggest possible directions for future developments.

Surface Engineered Peroxidase-Mimicking Gold Nanoparticles to Subside Cell Inflammation

The smart design of nanoparticles with varying surfaces may open a new avenue for potential biomedical applications. Consequently, several approaches have been established for controlled synthesis to develop the unique physicochemical properties of nanoparticles. However, many of the synthesis and functionalization methods are chemical-based and might be toxic to limit the full potential of nanoparticles. Here, curcumin (a plant-derived material) based synthesis of gold (Au) nanoparticles, followed by the development of a suitable exterior corona using isoniazid (INH, antibiotic), tyrosine (Tyr, amino acid), and quercetin (Qrc, antioxidant), is reported. All these nanoparticles (Cur-Au, Cur-Au^INH, Cur-Au^Tyr, and Cur-Au^Qrc) possess inherent peroxidase-mimicking natures depending on the surface corona of respective nanoparticles, and they are found to be excellent candidates for free radical scavenging action. The peroxidase-mimicking nanoparticle interactions with red blood cells and mouse macrophages confirmed their hemo- and biocompatible nature. Moreover, these surface-engineered Au nanoparticles were found to be suitable in subsiding key pro-inflammatory cytokines such as interleukin-6 (IL-6), tumor necrosis factor-α (TNF-α), and interleukin-1β (IL-1β). The inherent peroxidase-mimicking behavior and anti-inflammatory potential without any significant toxicity of these nanoparticles may open new prospects for nanomedicine.

Prospects of Exploring the Metal-Organic Framework for Combating Antimicrobial Resistance

Infectious diseases are a major public health concern globally. Infections caused by pathogens with resistance against commonly used antimicrobial drugs or antibiotics (known as antimicrobial resistance, AMR) are becoming extremely difficult to control. AMR has thus been declared as one of the top 10 global public health threats, as it has very limited solutions. The drying pipeline of effective antibiotics has further worsened the situation. There is no absolute treatment, and the limitations of existing methods warrant further development in antimicrobials. Recent developments in the nanomaterial field present them as promising therapeutics and effective alternative to conventional antibiotics and synthetic drugs. The metal-organic framework (MOF) is a recent addition to the antimicrobial category with superior properties. The MOF exerts antimicrobial action on a wide range of species and is highly biocompatible. Additionally, their porous structures allow the incorporation of biomolecules and drugs for synergistic antimicrobial action. This review provides an inclusive summary of the molecular events responsible for resistance development and current trends in antimicrobials to combat antibiotic resistance and explores the potential role of the MOF in tackling the drug-resistant microbial species.

Advances in Delivery of Chemotherapeutic Agents for Cancer Treatment

Presently, most of the treatment strategies for cancer are focused on the surgical removal of cancerous tumors, along with physical and chemical treatment such as radiotherapy and chemotherapy, respectively. The primary issue associated with these methods is the inhibition of normal cell growth and serious side effects associated with systemic toxicity. The traditional chemotherapeutics which were delivered systemically were inadequate and had serious dose limiting side effects. Recent advances in the development of chemotherapeutics have simultaneously paved the way for efficient targeted drug delivery. Despite the advances in the field of oncogenic drugs, several limitations remain, such as early blood clearance, acquired resistance against cytotoxic agents, toxicity associated with chemotherapeutics, and site-specific drug delivery. Hence, this review article focuses on the recent scientific advancements made in different types of drug delivery systems, including, organic nanocarriers (polymers, albumins, liposomes, and micelles), inorganic nanocarriers (mesoporous silica nanoparticles, gold nanoparticles, platinum nanoparticles, and carbon nanotubes), aptamers, antibody-drug conjugates, and peptides. These targeted drug delivery approaches offer numerous advantages such as site-specific drug delivery, minimal toxicity, better bioavailability, and an increased overall efficacy of the chemotherapeutics. Graphical abstract.

Nanobiotechnology-assisted therapies to manage brain cancer in personalized manner

There are numerous investigated factors that limit brain cancer treatment efficacy such as ability of prescribed therapy to cross the blood-brain barrier (BBB), tumor specific delivery of a therapeutics, transport within brain interstitium, and resistance of tumor cells against therapies. Recent breakthroughs in the field of nano-biotechnology associated with developing multifunctional nano-theranostic emerged as an effective way to manage brain cancer in terms of higher efficacy and least possible adverse effects. Keeping challenges and state-of-art accomplishments into consideration, this review proposes a comprehensive, careful, and critical discussion focused on efficient nano-enabled platforms including nanocarriers for drug delivery across the BBB and nano-assisted therapies (e.g., nano-immunotherapy, nano-stem cell therapy, and nano-gene therapy) investigated for brain cancer treatment. Besides therapeutic efficacy point-of-view, efforts are being made to explore ways projected to tune such developed nano-therapeutic for treating patients in personalized manner via controlling size, drug loading, delivery, and retention. Personalized brain tumor management based on advanced nano-therapies can potentially lead to excellent therapeutic benefits based on unique genetic signatures in patients and their individual disease profile. Moreover, applicability of nano-systems as stimulants to manage the brain cancer growth factors has also been discussed in photodynamic therapy and radiotherapy. Overall, this review offers a comprehensive information on emerging opportunities in nanotechnology for advancing the brain cancer treatment.

Nano-engineering stable contact-based antimicrobials: Chemistry at the interface between nano-gold and bacteria

Contact-based antimicrobials, as antibiotic-free technologies that use non-specific interactions with bacterial cells to exert antimicrobial activity, are a prospective solution in fighting the global issue of bacterial resistance. A very simplified approach to their design considers the direct bonding of cationic guanidine-containing amino acids to the surface of nano-gold carriers. The structure enables antimicrobial activity due to a high density of cationic surface charges. This opens a set of novel questions that are important for their effective engineering, particularly regarding (i) chemistry and events that take place at the interface between NPs and cells, (ii) the direct influence of a charge (and its change) on interactions with bacterial and mammalian cells, and (iii) the stability of structures (and their antimicrobial activity) in the presence of enzymes, which are addressed in this paper. Because of the ability of amino acid-functionalized nano-gold to retain structural and functional activity, even after exposure to a range of physicochemical stimuli, they provide an excellent nanotechnological platform for designing highly effective contact-based antimicrobials and their applications.

Increased in vitro Anti-HIV Activity of Caffeinium-Functionalized Polyoxometalates

Polyoxometalates (POMs), molecular metal oxide anions, are inorganic clusters with promising antiviral activity. Herein we report increased anti-HIV-1 activity of a POM when electrostatically combined with organic counter-cations. To this end, Keggin-type cerium tungstate POMs have been combined with organic methyl-caffeinium (Caf) cations, and their cytotoxicity, antiviral activity and mode of action have been studied. The novel compound, Caf4 K[β2 -CeSiW11 O39 ]×H2 O, exhibits sub-nanomolar antiviral activity and inhibits HIV-1 infectivity by acting on an early step of the viral infection cycle. This work demonstrates that combination of POM anions and organic bioactive cations can be a powerful new strategy to increase antiviral activity of these inorganic compounds.

In vitroanti-oxidant and cytotoxic activities of gold nanoparticles synthesized from an aqueous extract of theXylopia aethiopicafruit

The development of gold nanoparticles (AuNPs) using a green approach has drawn considerable interest in the field of nanomedicine. Its wide application in clinical diagnosis, imaging and therapeutics portrays its importance for human existence. In this study, we reported on the biogenic synthesis of AuNPs using the aqueous extract of theXylopia aethiopicafruit (AEXAf), which acts as both a reducing and stabilizing agent. The characterization of AEXAf-AuNPs was performed using ultraviolet-visible spectroscopy, dynamic light scattering and zeta potential measurements, high-resolution transmission electron microscopy and Fourier transform-infrared spectroscopy. Thein vitroanti-oxidant activities of the AEXAf-AuNPs and AEXAf were evaluated using 2,2-diphenyl-1-picrylhydrazyl (DPPH) and ferric reducing anti-oxidant power. Thein vitrocytotoxic activities of the AEXAf-AuNPs and AEXAf against breast and colorectal cancer cells were evaluated using 3,-(4,5 dimethylthiazol)-2,5 diphenyl tetrazolium bromide (MTT) viability and annexin V/PI assays. The AEXAf-AuNPs exhibited surface plasmon absorption maximum at 522 nm and were stable for 4 weeks. The average size of the AEXAf-AuNPs was 10.61 ± 3.33 nm on the high-resolution transmission electron microscopy images. Thein vitroanti-oxidant activities of the AEXAf-AuNPs and AEXAf were concentration dependent. The AEXAf-AuNPs were cytotoxic to the cancer cells and non-toxic to the non-cancerous human fibroblast cells (KMST-6) (up to 200μg ml^-1). From these results, the AEXAf-AuNPs showed good anti-oxidant and anti-cancer activities, and can be suggested as a possible therapeutic agent for breast and colorectal cancer.

Polyoxometalate-Mediated Vacancy-Engineered Cerium Oxide Nanoparticles Exhibiting Controlled Biological Enzyme-Mimicking Activities

The biological enzyme-mimetic activity of cerium oxide nanoparticles (CeNPs) is well known to scavenge the reactive oxygen and nitrogen species in cell culture and animal models, imparting protection from the deleterious effects of oxidative and nitrosative stress. The superoxide dismutase (SOD)- and catalase-mimicking activity of CeNPs is reported to be controlled by the oxidation state of the surface "Ce" ions, where a high ratio of Ce^3+/4+ or Ce^4+/3+ has been considered for the displayed SOD and catalase-like activity, respectively. However, the redox behavior of CeNPs can be controlled by certain ligands that could offer changes in their enzyme-mimetic properties. Therefore, in this work, we have studied the enzyme-mimetic activities of CeNPs under the influence of polyoxometalates [phosphomolybdic acid (PMA) and phosphotungstic acid (PTA)], which are electron-dense molecules displaying quick and reversible multielectron redox reactions. Results revealed that the interaction of PMA with CeNPs results in the inhibition of the SOD-like activity; however, it has no impact on the catalase-like activity. Contrary to this, the interaction of PTA with CeNPs improved the SOD as well as catalase-like activities of CeNPs (3+), which generally do not exhibit catalase activity in the bare form. Although CeNPs (3+) did not show any peroxidase-like activity, CeNPs (4+) showed excellent activity, which was enhanced after the interaction with polyoxometalates. Further, the autoregeneration ability of CeNPs was found to be intact even after PTA or PMA interaction; however, the full catalytic activity was observed in the case of PTA but partially with PMA.

Surface-Engineered Cancer Nanomedicine: Rational Design and Recent Progress

Cancer is highly heterogeneous in nature and characterized by abnormal, uncontrolled cells' growth. It is responsible for the second leading cause of death in the world. Nanotechnology is explored profoundly for sitespecific delivery of cancer chemotherapeutics as well as overcome multidrug-resistance (MDR) challenges in cancer. The progress in the design of various smart biocompatible materials (such as polymers, lipids and inorganic materials) has now revolutionized the area of cancer research for the rational design of nanomedicine by surface engineering with targeting ligands. The small tunable size and surface properties of nanomedicines provide the opportunity of multiple payloads and multivalent-ligand targeting to achieve drug efficacy even in MDR cancer. Furthermore, efforts are being carried out for the development of novel nano-pharmaceutical design, focusing on the delivery of therapeutic and diagnostic agents simultaneously which is called theranostics to assess the progress of therapy in cancer. This review aimed to discuss the physicochemical manipulation of cancer nanomedicine for rational design and recent progress in the area of surface engineering of nanomedicines to improve the efficacy of cancer chemotherapeutics in MDR cancer as well. Moreover, the problem of toxicity of the advanced functional materials that are used in nanomedicines and are exploited to achieve drug targeting in cancer is also addressed.

Engineering bioactive surfaces on nanoparticles and their biological interactions

The successful integration of nanoparticles into biomedical applications requires modulation of their surface properties so that the interaction with biological systems is regulated to minimize toxicity for biological function. In the present work, we have engineered bioactive surfaces on gold (Au) and silver (Ag) nanoparticles and subsequently evaluated their interaction with mouse skin fibroblasts and macrophages. The Au and Ag nanoparticles were synthesized using tyrosine, tryptophan, isonicotinylhydrazide, epigallocatechin gallate, and curcumin as reducing and stabilizing agents. The nanoparticles thus prepared showed surface corona and exhibited free radical scavenging and enzyme activities with limited cytotoxicity and genotoxicity. We have thus developed avenues for engineering the surface of nanoparticles for biological applications.

A blend hydrogel based on polyoxometalate for long-term and repeatedly localized antibacterial application study

Herein, a polyoxometalate (POM)-based blend hydrogel system was in situ constructed by incorporating cetyltrimethylammoniumbromide (CTAB)-encapsulated POM cationic micelles to bare hydrogel matrixes followed by copolymerization of multivalent crosslinking groups. It was demonstrated that the fabricated blend hydrogel possessed tunable physicochemical properties, good swelling behavior (maximum swelling rate of 229% in buffer solution of pH 8.0), excellent local action and sustained release of POM component (release ratio achieved nearly 100% at the time of 120 min). Antibacterial activity study revealed that the introduction of POM greatly improved the bioavailability of itself, namely, leading to a more effective enhancement of therapeutic effects (survival ratio of both strains less than 5%). Besides, bactericidal rates (ca. 51%) were achieved even after six runs repeated, thereby verifying the biological application potential of this material. Finally, the practical application potentials were investigated and future prospects in relevant research areas were forecasted.

Hybrid Gold Nanoparticle-Polyoxovanadate Matrices: A Novel Surface Enhanced Raman/Surface Enhanced Infrared Spectroscopy Substrate

Bare gold nanoparticles were embedded into an iron-polyoxovanadate matrix and used to enhance both the infrared and Raman signatures of a model analyte. A detailed characterization of the matrix-embedded nanoparticles revealed that they retained a plasmon resonance at 564 nm. The enhancement of vibrational signatures of the model analyte crystal violet using bare and embedded gold nanoparticles was compared for both surface enhanced infrared (SEIRA) spectroscopy and surface enhanced Raman spectroscopy (SERS) yielding enhancement factors of 2.2 for SEIRA and 77 for SERS. In contrast, the bare gold nanoparticles revealed significantly lower enhancements (1.6 for SEIRA; 20 for SERS). Hence, it was shown that embedding nanoparticles within an inorganic polyoxometalate-based matrix is an innovative strategy to amplify their signal enhancement properties in vibrational spectroscopies.

A new methodology for simultaneous comparison and optimization between nanoparticles and their drug conjugates against various multidrug-resistant bacterial strains

Background

Multidrug-resistant bacteria are becoming more hazardous day by day for human health all over the world, and the scientific community is trying hard to resolve this issue by various approaches. One of the very common approaches is to bind drugs to nanoparticles and study enhanced antibacterial properties.

Objective

To compare simultaneously different types of nanoparticles, their concentration, bacterial strains and their incubation time intervals for each of the selected drug combination.

Methods

We have selected the most commonly used gold and silver nanoparticles and few examples from fluoroquinolone antibiotics to make their conjugates and study their efficacy against multidrug-resistant E. coli and S. aureus strains simultaneously, at different incubation time intervals and different concentration of nanoparticles.

Results

Gold nanoparticle hybrids do not show any significant effect. Silver nanoparticle hybrids show far better results, even at extremely low concentrations.

Conclusions

This unique and simple approach allows us to know the exact time intervals and concentration required for each nanoparticle combination to control the growth for any specific strain. This approach can be extended to any set of nanoparticles, drugs and bacterial strains for comparative purposes.

Polyoxometalates function as indirect activators of a G protein-coupled receptor

A series of multivalent polyoxovanadates were found to activate signaling of a G protein coupled receptor, the luteinizing hormone receptor.

One-pot synthesis of a new generation of hybrid bisphosphonate polyoxometalate gold nanoparticles as antibiofilm agents

A reduced polyoxovanadate functionalized with bisphosphonate molecules was synthesized and used to prepare in one step hybrid organic-inorganic polyoxometalate decorated gold nanoparticles. These new composites were shown to strongly inhibit P. aeruginosa and S. epidermidis biofilm growth, with the three components constituting the nanoparticles (Au0 core, vanadium and alendronate) acting synergistically.

Current trends and challenges in cancer management and therapy using designer nanomaterials

Nanotechnology has the potential to circumvent several drawbacks of conventional therapeutic formulations. In fact, significant strides have been made towards the application of engineered nanomaterials for the treatment of cancer with high specificity, sensitivity and efficacy. Tailor-made nanomaterials functionalized with specific ligands can target cancer cells in a predictable manner and deliver encapsulated payloads effectively. Moreover, nanomaterials can also be designed for increased drug loading, improved half-life in the body, controlled release, and selective distribution by modifying their composition, size, morphology, and surface chemistry. To date, polymeric nanomaterials, metallic nanoparticles, carbon-based materials, liposomes, and dendrimers have been developed as smart drug delivery systems for cancer treatment, demonstrating enhanced pharmacokinetic and pharmacodynamic profiles over conventional formulations due to their nanoscale size and unique physicochemical characteristics. The data present in the literature suggest that nanotechnology will provide next-generation platforms for cancer management and anticancer therapy. Therefore, in this critical review, we summarize a range of nanomaterials which are currently being employed for anticancer therapies and discuss the fundamental role of their physicochemical properties in cancer management. We further elaborate on the topical progress made to date toward nanomaterial engineering for cancer therapy, including current strategies for drug targeting and release for efficient cancer administration. We also discuss issues of nanotoxicity, which is an often-neglected feature of nanotechnology. Finally, we attempt to summarize the current challenges in nanotherapeutics and provide an outlook on the future of this important field.

A review on anti-bacterials to combat resistance: From ancient era of plants and metals to present and future perspectives of green nano technological combinations

In the primitive era, humans benefited partially from plants and metals to treat microbial infections. Later these infections were cured with antibiotics but further suffered from resistance issues. In searching of an alternative, researchers developed an adjuvant therapy but were hampered by spreading resistance. Subsequently, nanoparticles (NPs) were proposed to cease the multi-drug resistant bacteria but were hindered due to toxicity issues. Recently, a novel adjuvant therapy employed metals and botanicals into innovative nanotechnology as nano-antibiotics. The combination of green synthesized metallic NPs with antibiotics seems to be a viable platform to combat against MDR bacteria by alleviating resistance and toxicity. This review focuses on the primitive to present era dealings with bacterial resistance mechanisms, newer innovations of nanotechnology and their multiple mechanisms to combat resistance. In addition, special focus is paid on greener NPs as antibiotic carriers, and their future prospects of controlled release and toxicity study.

Effect of synthesis, purification and growth determination methods on the antibacterial and antifungal activity of gold nanoparticles

In recent years, both nanotechnology and the use of nanomaterials have been growing in fields as diverse as biomedicine, food or electronics. Particularly metal nanoparticles, such as gold nanoparticles (AuNPs), are being widely studied with different applications, for example as an antimicrobial agent, in hyperthermic therapy or drug transport. Gold nanoparticles can be synthesized by different methods, such as stand out reduction with citrate or greener methods that use greener reducing agents (e.g. stainless steel). In the present work, both the effect of the synthesis method yielding AuNPs with similar size and purification of AuNPs affect the antibacterial and antifungal activities of the AuNPs obtained by citrate reduction and with stainless steel. The growth curves of the gram-negative (E. coli) and gram-positive bacteria (S. aureus) and the yeast C. albicans were constructed and the cell viability was evaluated by (2,3-Bis-(2-Methoxy-4-Nitro-5-Sulfophenyl)-2H-Tetrazolium-5-Carboxanilide (XTT). According to our results, the purification of the AuNPs after their synthesis and the growth determination method affect the antibacterial and antifungal activities while the synthesis method shows no significant differences.

Shape-controlled metal nanoparticles for electrocatalytic applications

The application of shape-controlled metal nanoparticles is profoundly impacting the field of electrocatalysis. On the one hand, their use has remarkably enhanced the electrocatalytic activity of many different reactions of interest. On the other hand, their usage is deeply contributing to a correct understanding of the correlations between shape/surface structure and electrochemical reactivity at the nanoscale. However, from the point of view of an electrochemist, there are a number of questions that must be fully satisfied before the evaluation of the shaped metal nanoparticles as electrocatalysts including (i) surface cleaning, (ii) surface structure characterization, and (iii) correlations between particle shape and surface structure. In this chapter, we will cover all these aspects. Initially, we will collect and discuss about the different practical protocols and procedures for obtaining clean shaped metal nanoparticles. This is an indispensable requirement for the establishment of correct correlations between shape/surface structure and electrochemical reactivity. Next, we will also report how some easy-to-do electrochemical experiments including their subsequent analyses can enormously contribute to a detailed characterization of the surface structure of the shaped metal nanoparticles. At this point, we will remark that the key point determining the resulting electrocatalytic activity is the surface structure of the nanoparticles (obviously, the atomic composition is also extremely relevant) but not the particle shape. Finally, we will summarize some of the most significant advances/results on the use of these shaped metal nanoparticles in electrocatalysis covering a wide range of electrocatalytic reactions including fuel cell-related reactions (electrooxidation of formic acid, methanol and ethanol and oxygen reduction) and also CO2 electroreduction.

Graphical Abstract: