Establishment of a markerless mutation delivery system in Bacillus subtilis stimulated by a double-strand break in the chromosome

Influence of PepF peptidase and sporulation on microcin J25 production in Bacillus subtilis

The lasso peptide microcin J25 (MccJ25) possesses strong antibacterial properties and is considered a potential effective component of bacterial disease treatment drugs and safe food preservatives. Although MccJ25 can be heterologously expressed in Bacillus subtilis as we have previously reported, its regulation and accumulation are yet to be understood. Here, we investigated the expression level and stability of MccJ25 in B. subtilis strains with disruption in peptidase genes pepA, pepF, and pepT. Oligoendopeptidase F (PepF) was found to be involved in reduction of the production of MccJ25 by degradation of its precursor peptide. In the pepF mutant, the MccJ25 reached a concentration of 1.68 µM after a cultivation time exceeding 60 hours, while the wild-type strain exhibited a concentration of only 0.14 µM. Moreover, the production of MccJ25 in B. subtilis downregulated the genes associated with sporulation, and this may contribute to its accumulation. Finally, this study provides a strategy to improve the stability and production of MccJ25 in B. subtilis.

IMPORTANCE

MccJ25 displays significant antibacterial activity, a well-defined mode of action, exceptional safety, and remarkable stability. Hence, it presents itself as a compelling candidate for an optimal antibacterial or anti-endotoxin medication. The successful establishment of exogenous production of MccJ25 in Bacillus subtilis provides a strategy for reducing its production cost and diversifying its utilization. In this study, we have provided evidence indicating that both peptidase PepF and sporulation are significant factors that limit the expression of MccJ25 in B. subtilis. The ΔpepF and ΔsigF mutants of B. subtilis express MccJ25 with higher production yield and enhanced stability. To sum up, this study developed several better engineered strains of B. subtilis, which greatly reduced the consumption of MccJ25 during the nutrient depletion stage of the host strain, improved its production, and elucidated factors that may be involved in reducing MccJ25 accumulation in B. subtilis.

Establishing Heterologous Production of Microcins J25 and Y in Bacillus subtilis

Microcin J25 (MccJ25) and microcin Y (MccY) are lasso peptides and considered potential alternatives to antibiotics and harmful preservatives. The combination of these two microcins can provide a wide antimicrobial spectrum against food-borne Salmonella. Currently, MccJ25 and MccY are produced using Escherichia coli expression systems; however, the entire production process is accompanied by negative effects from endotoxins. In this study, we identified Bacillus subtilis as a suitable host for MccJ25 and MccY production. High-level production of microcins was achieved by promoter optimization, host strain selection, and recombinant expression. The engineered strains produced maximum yields of 2.827 μM MccJ25 and 1.481 μM MccY. This is the first study to demonstrate the expression of MccJ25 and MccY in B. subtilis, and it offers a few engineered strains that are without antibiotic resistance markers, inducer-free, sporulation-deficient, and free of the negative effects of endotoxins for antibacterial therapy and food preservation.

Barriers to simultaneous multilocus integration in Bacillus subtilis tumble down: development of a straightforward screening method for the colorimetric detection of one-step multiple gene insertion using the CRISPR-Cas9 system

BACKGROUND

Despite recent advances in genetic engineering tools for effectively regulating and manipulating genes, efficient simultaneous multigene insertion methods have not been established in Bacillus subtilis. To date, multilocus integration systems in B. subtilis, which is one of the main industrial enzyme producers and a GRAS (generally regarded as safe) microbial host, rely on iterative rounds of plasmid construction for sequential insertions of genes into the B. subtilis chromosome, which is tedious and time consuming.

RESULTS

In this study, we present development and proof-of-concept of a novel CRISPR-Cas9-based genome-editing strategy for the colorimetric detection of one-step multiple gene insertion in B. subtilis. First, up to three copies of the crtMN operon from Staphylococcus aureus, encoding a yellow pigment, were incorporated at three ectopic sites within the B. subtilis chromosome, rendering engineered strains able to form yellow colonies. Second, a single CRISPR-Cas9-based plasmid carrying a highly specific single guide RNA (sgRNA) targeting crtMN operon and a changeable editing template was constructed to facilitate simultaneous insertion of multiple gene-copies through homology-directed repair (HDR). Upon transformation of engineered strains with engineered plasmids, strains harboring up to three gene copies integrated into the chromosome formed white colonies because of the removal of the crtMN operon, clearly distinguishable from yellow colonies harboring undesired genetic modifications. As a result, construction of a plasmid-less, marker-free, high-expression stable producer B. subtilis strain can be completed in only seven days, demonstrating the potential that the implementation of this technology may bring for biotechnology purposes.

CONCLUSIONS

The novel technology expands the genome-editing toolset for B. subtilis and means a substantial improvement over current methodology, offering new application possibilities that we envision should significantly boost the development of B. subtilis as a chassis in the field of synthetic biology.

Synthetic biology tools for engineering Corynebacterium glutamicum

Corynebacterium glutamicum is a promising organism for the industrial production of amino acids, fuels, and various value-added chemicals. From the whole genome sequence release, C. glutamicum has been valuable in the field of industrial microbiology and biotechnology. Continuous discovery of genetic manipulations and regulation mechanisms has developed C. glutamicum as a synthetic biology platform chassis. This review summarized diverse genomic manipulation technologies and gene expression tools for static, dynamic, and multiplex control at transcription and translation levels. Moreover, we discussed the current challenges and applicable tools to C. glutamicum for future advancements.

Improvement of the catalytic performance of glycerol kinase from Bacillus subtilis by chromosomal site-directed mutagenesis

Glycerol kinase is the key enzyme in glycerol metabolism, and its catalytic efficiency has an important effect on glycerol utilization. Based on an analysis of the glycerol utilization pathway and regulation mechanism in B. subtilis, we conducted site-directed mutagenesis of the key glycerol kinase gene (glpK) on the chromosome to improve the glycerol utilization efficiency of Bacillus subtilis. Recombinant wild-type Bacillus subtilis glycerol kinase (BsuGlpK^WT) and two mutants (BsuGlpK^M270I and BsuGlpK^S71V) were successfully overexpressed in Escherichia coli BL21(DE3) and purified by Ni-IDA metal chelate chromatography. The specific activity of the BsuGlpK^M270I mutant (62.6 U/mg) was significantly higher (296.2%) than that of wild-type BsuGlpK^WT (15.8 U/mg). By contrast, the mutant BsuGlpK^S71V (4.89 U/mg) exhibited lower (69.1%) activity than BsuGlpK^WT, which suggested that variant S71V exhibited reduced catalytic efficiency for the substrate. Furthermore, the mutant strain B. subtilis M270I was constructed using a markerless delivery system, and exhibited a higher specific growth rate (improved by 11.3%, from 0.453 ± 0.012 to 0.511 ± 0.017 h^-1) and higher maximal biomass (cell dry weight increased by 16%, from 0.577 ± 0.033 to 0.721 ± 0.015 g/L) than the parental strain with a shortened lag phase (2 ~ 4 h shorter) in M9 minimal medium with glycerol. These results indicate that the mutated glpK resulted in improved glycerol utilization, which has broad application prospects.

AutoESD: a web tool for automatic editing sequence design for genetic manipulation of microorganisms

Advances in genetic manipulation and genome engineering techniques have enabled on-demand targeted deletion, insertion, and substitution of DNA sequences. One important step in these techniques is the design of editing sequences (e.g. primers, homologous arms) to precisely target and manipulate DNA sequences of interest. Experimental biologists can employ multiple tools in a stepwise manner to assist editing sequence design (ESD), but this requires various software involving non-standardized data exchange and input/output formats. Moreover, necessary quality control steps might be overlooked by non-expert users. This approach is low-throughput and can be error-prone, which illustrates the need for an automated ESD system. In this paper, we introduce AutoESD (https://autoesd.biodesign.ac.cn/), which designs editing sequences for all steps of genetic manipulation of many common homologous-recombination techniques based on screening-markers. Notably, multiple types of manipulations for different targets (CDS or intergenic region) can be processed in one submission. Moreover, AutoESD has an entirely cloud-based serverless architecture, offering high reliability, robustness and scalability which is capable of parallelly processing hundreds of design tasks each having thousands of targets in minutes. To our knowledge, AutoESD is the first cloud platform enabling precise, automated, and high-throughput ESD across species, at any genomic locus for all manipulation types.

A facile and robust T7-promoter-based high-expression of heterologous proteins in Bacillus subtilis

To mimic the Escherichia coli T7 protein expression system, we developed a facile T7 promoter-based protein expression system in an industrial microorganism Bacillus subtilis. This system has two parts: a new B. subtilis strain SCK22 and a plasmid pHT7. To construct strain SCK22, the T7 RNA polymerase gene was inserted into the chromosome, and several genes, such as two major protease genes, a spore generation-related gene, and a fermentation foam generation-related gene, were knocked out to facilitate good expression in high-density cell fermentation. The gene of a target protein can be subcloned into plasmid pHT7, where the gene of the target protein was under tight control of the T7 promoter with a ribosome binding site (RBS) sequence of B. subtilis (i.e., AAGGAGG). A few recombinant proteins (i.e., green fluorescent protein, α-glucan phosphorylase, inositol monophosphatase, phosphoglucomutase, and 4-α-glucanotransferase) were expressed with approximately 25-40% expression levels relative to the cellular total proteins estimated by SDS-PAGE by using B. subtilis SCK22/pHT7-derived plasmid. A fed-batch high-cell density fermentation was conducted in a 5-L fermenter, producing up to 4.78 g/L inositol monophosphatase. This expression system has a few advantageous features, such as, wide applicability for recombinant proteins, high protein expression level, easy genetic operation, high transformation efficiency, good genetic stability, and suitability for high-cell density fermentation.

Plasmid Curing and Exchange Using a Novel Counter-Selectable Marker Based on Unnatural Amino Acid Incorporation at a Sense Codon

A protocol was designed for plasmid curing using a novel counter-selectable marker, named pylS^ZK-pylT, in Escherichia coli. The pylS^ZK-pylT marker consists of the archaeal pyrrolysyl-tRNA synthetase (PylRS) and its cognate tRNA (tRNA^pyl) with modification, and incorporates an unnatural amino acid (Uaa), N^ε-benzyloxycarbonyl-l-lysine (ZK), at a sense codon in ribosomally synthesized proteins, resulting in bacterial growth inhibition or killing. Plasmid curing is performed by exerting toxicity on pylS^ZK-pylT located on the target plasmid, and selecting only proliferative bacteria. All tested bacteria obtained using this protocol had lost the target plasmid (64/64), suggesting that plasmid curing was successful. Next, we attempted to exchange plasmids with the identical replication origin and an antibiotic resistance gene without plasmid curing using a modified protocol, assuming substitution of plasmids complementing genomic essential genes. All randomly selected bacteria after screening had only the substitute plasmid and no target plasmid (25/25), suggesting that plasmid exchange was also accomplished. Counter-selectable markers based on PylRS-tRNA^pyl, such as pylS^ZK-pylT, may be scalable in application due to their independence from the host genotype, applicability to a wide range of species, and high tunability due to the freedom of choice of target codons and Uaa’s to be incorporated.

Improving the Production of Riboflavin by Introducing a Mutant Ribulose 5-Phosphate 3-Epimerase Gene in Bacillus subtilis

Ribulose 5-phosphate (Ru5P) and guanosine 5′-triphosphate (GTP) are two key precursors of riboflavin, whereby Ru5P is also a precursor of GTP. Ribulose 5-phosphate 3-epimerase (Rpe) catalyzes the conversion of ribulose 5-phosphate into xylulose 5-phosphate. Inactivation of Rpe can reduce the consumption of Ru5P, enhancing the carbon flux toward riboflavin biosynthesis. Here we investigated the effect of mutation of rpe and other related genes on riboflavin production, physiological and metabolic phenotypes in Bacillus subtilis LY (BSLY). Introducing single nucleotide deletion (generated BSR) or nonsense mutation (generated BSRN) on the genomic copy of rpe, resulting in more than fivefold increase of riboflavin production over the parental strain. BSR process 62% Rpe activity, while BSRN lost the entire Rpe activity and had a growth defect compared with the parent strain. BSR and BSRN exhibited increases of the inosine and guanine titers, in addition, BSRN exhibited an increase of inosine 5′-monophosphate titer in fermentation. The transcription levels of most oxidative pentose phosphate pathway and purine synthesis genes were unchanged in BSR, except for the levels of zwf and ndk, which were higher than in BSLY. The production of riboflavin was increased to 479.90 ± 33.21 mg/L when ribA was overexpressed in BSR. The overexpression of zwf, gntZ, prs, and purF also enhanced the riboflavin production. Finally, overexpression of the rib operon by the pMX45 plasmid and mutant gnd by pHP03 plasmid in BSR led to a 3.05-fold increase of the riboflavin production (977.29 ± 63.44 mg/L), showing the potential for further engineering of this strain.

Multiplex Genetic Engineering Exploiting Pyrimidine Salvage Pathway-Based Endogenous Counterselectable Markers

Selectable markers are indispensable for genetic engineering, yet their number and variety are limited. Most selection procedures for prototrophic cells rely on the introduction of antibiotic resistance genes. New minimally invasive tools are needed to facilitate sophisticated genetic manipulations. Here, we characterized three endogenous genes in the human fungal pathogen Aspergillus fumigatus for their potential as markers for targeted genomic insertions of DNAs of interest (DOIs). Since these genes are involved in uptake and metabolization of pyrimidines, resistance to the toxic effects of prodrugs 5-fluorocytosine and 5-fluorouracil can be used to select successfully integrated DOIs. We show that DOI integration, resulting in the inactivation of these genes, caused no adverse effects with respect to nutrient requirements, stress resistance, or virulence. Beside the individual use of markers for site-directed integration of reporter cassettes, including the 17-kb penicillin biosynthetic cluster, we demonstrate their sequential use by inserting three genes encoding fluorescent proteins into a single strain for simultaneous multicolor localization microscopy. In addition to A. fumigatus, we validated the applicability of this novel toolbox in Penicillium chrysogenum and Fusarium oxysporum Enabling multiple targeted insertions of DOIs without the necessity for exogenous markers, this technology has the potential to significantly advance genetic engineering.IMPORTANCE This work reports the discovery of a novel genetic toolbox comprising multiple, endogenous selectable markers for targeted genomic insertions of DNAs of interest (DOIs). Marker genes encode proteins involved in 5-fluorocytosine uptake and pyrimidine salvage activities mediating 5-fluorocytosine deamination as well as 5-fluorouracil phosphoribosylation. The requirement for their genomic replacement by DOIs to confer 5-fluorocytosine or 5-fluorouracil resistance for transformation selection enforces site-specific integrations. Due to the fact that the described markers are endogenously encoded, there is no necessity for the exogenous introduction of commonly employed markers such as auxotrophy-complementing genes or antibiotic resistance cassettes. Importantly, inactivation of the described marker genes had no adverse effects on nutrient requirements, growth, or virulence of the human pathogen Aspergillus fumigatus Given the limited number and distinct types of selectable markers available for the genetic manipulation of prototrophic strains such as wild-type strains, we anticipate that the proposed methodology will significantly advance genetic as well as metabolic engineering of fungal species.

Development and characterization of a CRISPR/Cas9n-based multiplex genome editing system for Bacillus subtilis

BACKGROUND

Metabolic engineering has expanded from a focus on designs requiring a small number of genetic modifications to increasingly complex designs driven by advances in multiplex genome editing technologies. However, simultaneously modulating multiple genes on the chromosome remains challenging in Bacillus subtilis. Thus, developing an efficient and convenient method for B. subtilis multiplex genome editing is imperative.

RESULTS

Here, we developed a CRISPR/Cas9n-based multiplex genome editing system for iterative genome editing in B. subtilis. This system enabled us to introduce various types of genomic modifications with more satisfying efficiency than using CRISPR/Cas9, especially in multiplex gene editing. Our system achieved at least 80% efficiency for 1-8 kb gene deletions, at least 90% efficiency for 1-2 kb gene insertions, near 100% efficiency for site-directed mutagenesis, 23.6% efficiency for large DNA fragment deletion and near 50% efficiency for three simultaneous point mutations. The efficiency for multiplex gene editing was further improved by regulating the nick repair mechanism mediated by ligD gene, which finally led to roughly 65% efficiency for introducing three point mutations on the chromosome. To demonstrate its potential, we applied our system to simultaneously fine-tune three genes in the riboflavin operon and significantly improved the production of riboflavin in a single cycle.

CONCLUSIONS

We present not only the iterative CRISPR/Cas9n system for B. subtilis but also the highest efficiency for simultaneous modulation of multiple genes on the chromosome in B. subtilis reported to date. We anticipate this CRISPR/Cas9n mediated system to greatly enhance the optimization of diverse biological systems via metabolic engineering and synthetic biology.

An update of the suicide plasmid-mediated genome editing system in Corynebacterium glutamicum

Corynebacterium glutamicum is an important industrial microorganism, but the availability of tools for its genetic modification has lagged compared to other model microorganisms such as Escherichia coli. Despite great progress in CRISPR-based technologies, the most feasible genome editing method in C. glutamicum is suicide plasmid-mediated, the editing efficiency of which is low due to high false-positive rates of sacB counter selection, and the requirement for tedious two-round selection and verification of rare double-cross-over events. In this study, an rpsL mutant conferring streptomycin resistance was harnessed for counter selection, significantly increasing the positive selection rate. More importantly, with the aid of high selection efficiencies through the use of antibiotics, namely kanamycin and streptomycin, the two-step verification strategy can be simplified to just one-step verification of the final edited strain. As proof of concept, a 2.5-kb DNA fragment comprising aroGfbr pheAfbr expressing cassettes was integrated into the genome of C. glutamicum, with an efficiency of 20% out of the theoretical 50%. The resulting strain produced 110 mg l-1  l-tyrosine in shake-flask fermentation. This updated suicide plasmid-mediated genome editing system will greatly facilitate genetic manipulations including single nucleotide mutation, gene deletion and gene insertion in C. glutamicum and can be easily applied to other microbes.

Modular Pathway Engineering of Bacillus subtilis To Promote De Novo Biosynthesis of Menaquinone-7

Menaquinone-7 (MK-7), a valuable vitamin K₂, plays an important role in the prevention of osteoporosis and cardiovascular calcification. We chose B. subtilis 168 as the chassis for the modular metabolic engineering design to promote the biosynthesis of MK-7. The biosynthetic pathway of MK-7 was categorized into four modules, namely, the MK-7 pathway (Module I), the shikimate (SA) pathway (Module II), the methylerythritol phosphate (MEP) pathway (Module III), and the glycerol metabolism pathway (Module IV). Overexpression of menA (Module I) resulted in 6.6 ± 0.1 mg/L of MK-7 after 120 h fermentation, which was 2.1-fold that of the starting strain BS168NU (3.1 ± 0.2 mg/L). Overexpression of aroA, aroD, and aroE (Module II) had a negative effect on the synthesis of MK-7. Simultaneous overexpression of dxs, dxr, yacM, and yacN (Module III) enabled the yield of MK-7 to 12.0 ± 0.1 mg/L. Moreover, overexpression of glpD (Module IV) resulted in an increase of the yield of MK-7 to 13.7 ± 0.2 mg/L. Furthermore, deletion of dhbB reduced the consumption of the intermediate metabolite isochorismate, thus promoting the yield of MK-7 to 15.4 ± 0.6 mg/L. Taken together, the final resulting strain MK3-MEP123-Gly2-Δ dhbB with simultaneous overexpression of menA, dxs, dxr, yacM-yacN, glpD and deletion of dhbB enabled the yield of MK-7 to 69.5 ± 2.8 mg/L upon 144 h fermentation in a 2 L baffled flask.

Construction, Model-Based Analysis, and Characterization of a Promoter Library for Fine-Tuned Gene Expression in Bacillus subtilis

Promoters are among the most-important and most-basic tools for the control of metabolic pathways. However, previous research mainly focused on the screening and characterization of some native promoters in Bacillus subtilis. To develop a broadly applicable promoter system for this important platform organism, we created a de novo synthetic promoter library (SPL) based on consensus sequences by analyzing the microarray transcriptome data of B. subtilis 168. A total of 214 potential promoters spanning a gradient of strengths was isolated and characterized by a green fluorescence assay. Among these, a detailed intensity analysis was conducted on nine promoters with different strengths by reverse-transcription polymerase chain reaction (RT-PCR) and sodium dodecyl sulfate polyacrylamide gel electrophoresis (SDS-PAGE). Furthermore, reconstructed promoters and promoter cassettes (tandem promoter cluster) were designed via statistical model-based analysis and tandem dual promoters, which showed strength that was increased 1.2- and 2.77-fold compared to that of promoter P43, respectively. Finally, the SPL was employed in the production of inosine and acetoin by repressing and over-expressing the relevant metabolic pathways, yielding a 700% and 44% increase relative to the respective control strains. This is the first report of a de novo synthetic promoter library for B. subtilis, which is independent of any native promoter. The strategy of improving and fine-tuning promoter strengths will contribute to future metabolic engineering and synthetic biology projects in B. subtilis.

Genetic Tools for the Enhancement of Probiotic Properties

The Lactobacillus genus is a diverse group of microorganisms, many of which are of industrial and medical relevance. Several Lactobacillus species have been used as probiotics, organisms that when present in sufficient quantities confer a health benefit to the host. A significant limitation to the mechanistic understanding of how these microbes provide health benefits to their hosts and how they can be used as therapeutic delivery systems has been the lack of genetic strategies to efficiently manipulate their genomes. This article will review the development and employment of traditional genetic tools in lactobacilli and highlight the latest methodologies that are allowing for precision genome engineering of these probiotic organisms. The application of these tools will be key in providing mechanistic insights into probiotics as well as maximizing the value of lactobacilli as either a traditional probiotic or as a platform for the delivery of therapeutic proteins. Finally, we will discuss concepts that we consider relevant for the delivery of engineered therapeutics to the human gut.

T7 RNA polymerase-driven inducible cell lysis for DNA transfer from Escherichia coli to Bacillus subtilis

The majority of the good DNA editing techniques have been developed in Escherichia coli; however, Bacillus subtilis is better host for a plethora of synthetic biology and biotechnology applications. Reliable and efficient systems for the transfer of synthetic DNA between E. coli and B. subtilis are therefore of the highest importance. Using synthetic biology approaches, such as streamlined lambda Red recombineering and Gibson Isothermal Assembly, we integrated genetic circuits pT7L123, Repr‐ts‐1 and pLT7pol encoding the lysis genes of bacteriophages MS2, ΦX174 and lambda, the thermosensitive repressor and the T7 RNA polymerase into the E. coli chromosome. In this system, T7 RNA polymerase regulated by the thermosensitive repressor drives the expression of the phage lysis genes. We showed that T7 RNA polymerase significantly increases efficiency of cell lysis and transfer of the plasmid and bacterial artificial chromosome‐encoded DNA from the lysed E. coli into B. subtilis. The T7 RNA polymerase‐driven inducible cell lysis system is suitable for the efficient cell lysis and transfer of the DNA engineered in E. coli to other naturally competent hosts, such as B. subtilis.

Combining Genes from Multiple Phages for Improved Cell Lysis and DNA Transfer from Escherichia coli to Bacillus subtilis

The ability to efficiently and reliably transfer genetic circuits between the key synthetic biology chassis, such as Escherichia coli and Bacillus subtilis, constitutes one of the major hurdles of the rational genome engineering. Using lambda Red recombineering we integrated the thermosensitive lambda repressor and the lysis genes of several bacteriophages into the E. coli chromosome. The lysis of the engineered autolytic cells is inducible by a simple temperature shift. We improved the lysis efficiency by introducing different combinations of lysis genes from bacteriophages lambda, ΦX174 and MS2 under the control of the thermosensitive lambda repressor into the E. coli chromosome. We tested the engineered autolytic cells by transferring plasmid and bacterial artificial chromosome (BAC)-borne genetic circuits from E. coli to B. subtilis. Our engineered system combines benefits of the two main synthetic biology chassis, E. coli and B. subtilis, and allows reliable and efficient transfer of DNA edited in E. coli into B. subtilis.

Development of a CRISPR-Cas9 Tool Kit for Comprehensive Engineering of Bacillus subtilis

The establishment of a clustered regularly interspaced short palindromic repeat (CRISPR)-Cas9 system for strain construction in Bacillus subtilis is essential for its progression toward industrial utility. Here we outline the development of a CRISPR-Cas9 tool kit for comprehensive genetic engineering in B. subtilis In addition to site-specific mutation and gene insertion, our approach enables continuous genome editing and multiplexing and is extended to CRISPR interference (CRISPRi) for transcriptional modulation. Our tool kit employs chromosomal expression of Cas9 and chromosomal transcription of guide RNAs (gRNAs) using a gRNA transcription cassette and counterselectable gRNA delivery vectors. Our design obviates the need for multicopy plasmids, which can be unstable and impede cell viability. Efficiencies of up to 100% and 85% were obtained for single and double gene mutations, respectively. Also, a 2.9-kb hyaluronic acid (HA) biosynthetic operon was chromosomally inserted with an efficiency of 69%. Furthermore, repression of a heterologous reporter gene was achieved, demonstrating the versatility of the tool kit. The performance of our tool kit is comparable with those of systems developed for Escherichia coli and Saccharomyces cerevisiae, which rely on replicating vectors to implement CRISPR-Cas9 machinery.

IMPORTANCE

In this paper, as the first approach, we report implementation of the CRISPR-Cas9 system in Bacillus subtilis, which is recognized as a valuable host system for biomanufacturing. The study enables comprehensive engineering of B. subtilis strains with virtually any desired genotypes/phenotypes and biochemical properties for extensive industrial application.

Characterization of genome-reduced Bacillus subtilis strains and their application for the production of guanosine and thymidine

Background

Genome streamlining has emerged as an effective strategy to boost the production efficiency of bio-based products. Many efforts have been made to construct desirable chassis cells by reducing the genome size of microbes. It has been reported that the genome-reduced Bacillus subtilis strain MBG874 showed clear advantages for the production of several heterologous enzymes including alkaline cellulase and protease. In addition to enzymes, B. subtilis is also used for the production of chemicals. To our best knowledge, it is still unknown whether genome reduction could be used to optimize the production of chemicals such as nucleoside products.

Results

In this study, we constructed a series of genome-reduced strains by deleting non-essential regions in the chromosome of B. subtilis 168. These strains with genome reductions ranging in size from 581.9 to 814.4 kb displayed markedly decreased growth rates, sporulation ratios, transformation efficiencies and maintenance coefficients, as well as increased cell yields. We re-engineered the genome-reduced strains to produce guanosine and thymidine, respectively. The strain BSK814G2, in which purA was knocked out, and prs, purF and guaB were co-overexpressed, produced 115.2 mg/L of guanosine, which was 4.4-fold higher compared to the control strain constructed by introducing the same gene modifications into the parental strain. We also constructed a thymidine producer by deleting the tdk gene and overexpressing the prs, ushA, thyA, dut, and ndk genes from Escherichia coli in strain BSK756, and the resulting strain BSK756T3 accumulated 151.2 mg/L thymidine, showing a 5.2-fold increase compared to the corresponding control strain.

Conclusions

Genome-scale genetic manipulation has a variety of effects on the physiological characteristics and cell metabolism of B. subtilis. By introducing specific gene modifications related to guanosine and thymidine accumulation, respectively, we demonstrated that genome-reduced strains had greatly improved properties compared to the wild-type strain as chassis cells for the production of these two products. These strains also have great potential for the production of other nucleosides and similar derived chemicals.

Electronic supplementary material

The online version of this article (doi:10.1186/s12934-016-0494-7) contains supplementary material, which is available to authorized users.

Metabolic engineering of Bacillus subtilis for chiral pure meso-2,3-butanediol production

BACKGROUND

2,3-Butanediol (2,3-BD) with low toxicity to microbes, could be a promising alternative for biofuel production. However, most of the 2,3-BD producers are opportunistic pathogens that are not suitable for industrial-scale fermentation. In our previous study, wild-type Bacillus subtilis 168, as a class I microorganism, was first found to generate only d-(-)-2,3-BD (purity >99 %) under low oxygen conditions.

RESULTS

In this work, B. subtilis was engineered to produce chiral pure meso-2,3-BD. First, d-(-)-2,3-BD production was abolished by deleting d-(-)-2,3-BD dehydrogenase coding gene bdhA, and acoA gene was knocked out to prevent the degradation of acetoin (AC), the immediate precursor of 2,3-BD. Next, both pta and ldh gene were deleted to decrease the accumulation of the byproducts, acetate and l-lactate. We further introduced the meso-2,3-BD dehydrogenase coding gene budC from Klebsiella pneumoniae CICC10011, as well as overexpressed alsSD in the tetra-mutant (ΔacoAΔbdhAΔptaΔldh) to achieve the efficient production of chiral meso-2,3-BD. Finally, the pool of NADH availability was further increased to facilitate the conversion of meso-2,3-BD from AC by overexpressing udhA gene (coding a soluble transhydrogenase) and low dissolved oxygen control during the cultivation. Under microaerobic oxygen conditions, the best strain BSF9 produced 103.7 g/L meso-2,3-BD with a yield of 0.487 g/g glucose in the 5-L batch fermenter, and the titer of the main byproduct AC was no more than 1.1 g/L.

CONCLUSION

This work offered a novel strategy for the production of chiral pure meso-2,3-BD in B. subtilis. To our knowledge, this is the first report indicating that metabolic engineered B. subtilis could produce chiral meso-2,3-BD with high purity under limited oxygen conditions. These results further demonstrated that B. subtilis as a class I microorganism is a competitive industrial-level meso-2,3-BD producer.

Integrative bacterial artificial chromosomes for DNA integration into the Bacillus subtilis chromosome

Bacillus subtilis is a well-characterized model bacterium frequently used for a number of biotechnology and synthetic biology applications. Novel strategies combining the advantages of B. subtilis with the DNA assembly and editing tools of Escherichia coli are crucial for B. subtilis engineering efforts. We combined Gibson Assembly and λ red recombineering in E. coli with RecA-mediated homologous recombination in B. subtilis for bacterial artificial chromosome-mediated DNA integration into the well-characterized amyE target locus of the B. subtilis chromosome. The engineered integrative bacterial artificial chromosome iBAC(cav) can accept any DNA fragment for integration into B. subtilis chromosome and allows rapid selection of transformants by B. subtilis-specific antibiotic resistance and the yellow fluorescent protein (mVenus) expression. We used the developed iBAC(cav)-mediated system to integrate 10kb DNA fragment from E. coli K12 MG1655 into B. subtilis chromosome. iBAC(cav)-mediated chromosomal integration approach will facilitate rational design of synthetic biology applications in B. subtilis.

High molecular weight DNA assembly in vivo for synthetic biology applications

DNA assembly is the key technology of the emerging interdisciplinary field of synthetic biology. While the assembly of smaller DNA fragments is usually performed in vitro, high molecular weight DNA molecules are assembled in vivo via homologous recombination in the host cell. Escherichia coli, Bacillus subtilis and Saccharomyces cerevisiae are the main hosts used for DNA assembly in vivo. Progress in DNA assembly over the last few years has paved the way for the construction of whole genomes. This review provides an update on recent synthetic biology advances with particular emphasis on high molecular weight DNA assembly in vivo in E. coli, B. subtilis and S. cerevisiae. Special attention is paid to the assembly of whole genomes, such as those of the first synthetic cell, synthetic yeast and minimal genomes.

CRISPR/Cas9 advances engineering of microbial cell factories

One of the key drivers for successful metabolic engineering in microbes is the efficacy by which genomes can be edited. As such there are many methods to choose from when aiming to modify genomes, especially those of model organisms like yeast and bacteria. In recent years, clustered regularly interspaced palindromic repeats (CRISPR) and its associated proteins (Cas) have become the method of choice for precision genome engineering in many organisms due to their orthogonality, versatility and efficacy. Here we review the strategies adopted for implementation of RNA-guided CRISPR/Cas9 genome editing with special emphasis on their application for metabolic engineering of yeast and bacteria. Also, examples of how nuclease-deficient Cas9 has been applied for RNA-guided transcriptional regulation of target genes will be reviewed, as well as tools available for computer-aided design of guide-RNAs will be highlighted. Finally, this review will provide a perspective on the immediate challenges and opportunities foreseen by the use of CRISPR/Cas9 genome engineering and regulation in the context of metabolic engineering.

Deregulation of purine pathway in Bacillus subtilis and its use in riboflavin biosynthesis

Background

Purine nucleotides are essential metabolites for living organisms because they are involved in many important processes, such as nucleic acid synthesis, energy supply, and biosynthesis of several amino acids and riboflavin. Owing to the pivotal roles of purines in cell physiology, the pool of intracellular purine nucleotides must be maintained under strict control, and hence the de novo purine biosynthetic pathway is tightly regulated by transcription repression and inhibition mechanism. Deregulation of purine pathway is essential for this pathway engineering in Bacillus subtilis.

Results

Deregulation of purine pathway was attempted to improve purine nucleotides supply, based on a riboflavin producer B. subtilis strain with modification of its rib operon. To eliminate transcription repression, the pur operon repressor PurR and the 5’-UTR of pur operon containing a guanine-sensing riboswitch were disrupted. Quantitative RT-PCR analysis revealed that the relative transcription levels of purine genes were up-regulated about 380 times. Furthermore, site-directed mutagenesis was successfully introduced into PRPP amidotransferase (encoded by purF) to remove feedback inhibition by homologous alignment and analysis. Overexpression of the novel mutant PurF (D293V, K316Q and S400W) significantly increased PRPP amidotransferase activity and triggered a strong refractory effect on purine nucleotides mediated inhibition. Intracellular metabolite target analysis indicated that the purine nucleotides supply in engineered strains was facilitated by a stepwise gene-targeted deregulation. With these genetic manipulations, we managed to enhance the metabolic flow through purine pathway and consequently increased riboflavin production 3-fold (826.52 mg/L) in the purF-VQW mutant strain.

Conclusions

A sequential optimization strategy was applied to deregulate the rib operon and purine pathway of B. subtilis to create genetic diversities and to improve riboflavin production. Based on the deregulation of purine pathway at transcription and metabolic levels, an extended application is recommended for the yield of products, like inosine, guanosine, adenosine and folate which are directly stemming from purine pathway in B. subtilis.

NADH plays the vital role for chiral pure D-(-)-2,3-butanediol production in Bacillus subtilis under limited oxygen conditions

Compared with traditional pathogenic producers, Bacillus subtilis as a Class I microorganism offers many advantages for industrial-scale 2,3-butanediol production. Unlike previous reports in which two stereoisomers (with a ratio of 3:2) were produced, we first found that wild type B. subtilis 168 generates only D-(-)-2,3-butanediol (purity >99%) under low oxygen conditions. The total high yield of 2,3-butanediol and acetoin, and acetoin reductase enzyme assay indicate that it is the high level of NADH availability, instead of high acetoin reductase activity, contributes more to 2,3-butanediol production in B. subtilis. The strategy for increasing the pool of NADH availability, the key factor for 2,3-butanediol production, was designed through low dissolved oxygen control, adding reducing substrates and rationally metabolic engineering. A transhydrogenase encoded by udhA was introduced to provide more NADH from NADPH and allowed enhanced 2,3-butanediol production. Finally, BSF20 produced 49.29 g/L D(-)-2,3-butanediol. These results demonstrated that B. subtilis is a competitive producer for chiral 2,3-butanediol production.

Current development in genetic engineering strategies of Bacillus species

The complete sequencing and annotation of the genomes of industrially-important Bacillus species has enhanced our understanding of their properties, and allowed advances in genetic manipulations in other Bacillus species. Post-genomic studies require simple and highly efficient tools to enable genetic manipulation. Here, we summarize the recent progress in genetic engineering strategies for Bacillus species. We review the available genetic tools that have been developed in Bacillus species, as well as methods developed in other species that may also be applicable in Bacillus. Furthermore, we address the limitations and challenges of the existing methods, and discuss the future research prospects in developing novel and useful tools for genetic modification of Bacillus species.