Total aortic arch replacement: superior ventriculo-arterial coupling with decellularized allografts compared with conventional prostheses

Assessment of left atrial fibrosis progression in canines following rapid ventricular pacing using 3D late gadolinium enhanced CMR images

Background

Atrial fibrillation (AF) is associated with extracellular matrix (ECM) remodelling and often coexists with myocardial fibrosis (MF); however, the causality of these conditions is not well established.

Objective

We aim to corroborate AF to MF causality by quantifying left atrial (LA) fibrosis in cardiac magnetic resonance (CMR) images after persistent rapid ventricular pacing and subsequent AF using a canine model and histopathological validation.

Methods

Twelve canines (9 experimental, 3 control) underwent baseline 3D LGE-CMR imaging at 3T followed by insertion of a pacing device and 5 weeks of rapid ventricular pacing to induce AF (experimental) or no pacing (control). Following the 5 weeks, pacing devices were removed to permit CMR imaging followed by excision of the hearts and histopathological imaging. LA myocardial segmentation was performed manually at baseline and post-pacing to permit volumetric %MF quantification using the image intensity ratio (IIR) technique, wherein fibrosis was defined as pixels > mean LA myocardium intensity + 2SD.

Results

Volumetric %MF increased by an average of 2.11 ± 0.88% post-pacing in 7 of 9 experimental dogs. While there was a significant difference between paired %MF measurements from baseline to post-pacing in experimental dogs (P = 0.019), there was no significant change in control dogs (P = 0.019 and P = 0.5, Wilcoxon signed rank tests). The median %MF for paced animals was significantly greater than that of non-paced dogs at the 5-week post-insertion time point (P = 0.009, Mann Whitney U test). Histopathological imaging yielded an average %MF of 19.42 ± 4.80% (mean ± SD) for paced dogs compared to 1.85% in one control dog.

Conclusion

Persistent rapid ventricular pacing and subsequent AF leads to an increase in LA fibrosis volumes measured by the IIR technique; however, quantification is limited by inherent image acquisition parameters and observer variability.

3D culturing of human pluripotent stem cells-derived endothelial cells for vascular regeneration

Rationale: Human induced pluripotent stem cell-derived endothelial cells can be candidates for engineering therapeutic vascular grafts. Methods: Here, we studied the role of three-dimensional culture on their characteristics and function both in vitro and in vivo. Results: We found that differentiated hPSC-EC can re-populate decellularized biomatrices; they remain viable, undergo maturation and arterial/venous specification. Human PSC-EC develop antifibrotic, vasoactive and anti-inflammatory properties during recellularization. In vivo, a robust increase in perfusion was detected at the engraftment sites after subcutaneous implantation of an hPSC-EC-laden hydrogel in rats. Histology confirmed survival and formation of capillary-like structures, suggesting the incorporation of hPSC-EC into host microvasculature. In a canine model, hiPSC-EC-seeded onto decellularised vascular segments were functional as aortic grafts. Similarly, we showed the retention and maturation of hiPSC-EC and dynamic remodelling of the vessel wall with good maintenance of vascular patency. Conclusions: A combination of hPSC-EC and biomatrices may be a promising approach to repair ischemic tissues.

An experimental evaluation of a concept to improve conventional aortic prostheses

Conventionally used textile prosthesis for traditional open surgical repair (OSR) of aortic aneurysms have a lower compliance than the native aortic tissue. Graft placements lead to an acute drop in compliance which effects cardiovascular risk and the development of graft related complications. A custom-made spring casing was applied to a Dacron graft segment under physiological pressure conditions within a five-element biventricular mock circulation loop, to investigate experimentally a concept to improve the compliance of a conventional aortic prosthesis by changing the transverse graft cross-section. Two different prosthesis locations, proximal and distal of compliant silicone tubing were used to study uniaxial graft compression with an elastic device. To characterise the devices' performance by means of pulse pressure (PP), diastolic pressure (P_dia) and pulse wave velocity(PWV), fluid pressures and flow were recorded. In a proximal graft setting (ascending aorta repair) elastic uniaxial compression with a custom-made spring casing (2 cm width) could significantly reduce PP by 10-14% (p < .001) and slowed PWV from 6.7 to 5.2 m/s (22%, p = .002). Applied to a graft in a distal position, the spring casing demonstrated less impact on PP (2-10%), but significantly reduced PWV in this mock aorta segment from 13.7 to 5.5 m/s (60%, p = .004). In conclusion, a newly conceptualised spring casing applied to the external wall of synthetic aortic grafts can reduce PP and slow PWV. By restoring elastic aortic recoil in stiff textile aortic prostheses, the presented concept is a potential solution to improve long-term aortic prosthesis related complications.

Modulating electrospun polycaprolactone scaffold morphology and composition to alter endothelial cell proliferation and angiogenic gene response

The aim of this study was to look at how the composition and morphology of polymer scaffolds could be altered to create an optimized environment for endothelial cells. Four polycaprolactone (PCL) scaffolds were electrospun with increasing fibre diameters ranging from 1.64 μm to 4.83 μm. The scaffolds were seeded with human umbilical vein endothelial cells (HUVEC) and cultured for 12 days. PCL scaffolds were then electrospun incorporating decellularized bovine aorta ECM and cultured in a hypoxic environment. We noted deeper cell infiltration on the largest fibre diameter compared to the other three scaffolds which resulted in an increase in the gene expression of CD31; a key angiogenic marker. Increased cell viability and cell proliferation were also noted on the largest fibre. Furthermore, we noted that the incorporation of extracellular matrix (ECM) had minimal effect on cell viability, both in normoxic and hypoxic culture conditions. Our results showed that these environments had limited influences on hypoxic gene expression. Interestingly, the major findings from this study was the production of excretory ECM components as shown in the scanning electron microscopy (SEM) images. The results from this study suggest that fibre diameter had a bigger impact on the seeded HUVECs than the incorporation of ECM or the culture conditions. The largest fibre dimeter (4.83 μm) is more suitable for seeding of HUVECs.

Characterization of a heparinized decellularized scaffold and its effects on mechanical and structural properties

Decellularization is a promising approach in tissue engineering to generate small-diameter blood vessels. However, some challenges still exist. We performed two decellularization phases to develop an optimal decellularized scaffold and analyze the relationship between the extracellular matrix (ECM) composition and mechanical properties. In decellularization phase I, we tested sodium dodecylsulfate (SDS), Triton X-100 (TX100) and trypsin at different concentrations and exposure times. In decellularization phase II, we systematically compared five combined decellularization protocols based on the results of phase I to identify the optimal method. These protocols tested cell removal, ECM preservation, mechanical properties, and residual cytotoxicity. We further immobilized heparin to optimal decellularized scaffolds and determined its anticoagulant activity and mechanical properties. The combined decellularization protocol comprising treatment with 0.5% SDS followed by 1% TX100 could completely remove the cellular contents and preserve the mechanical properties and ECM architecture better. In addition, the heparinized decellularized scaffolds not only had sustained anticoagulant activity, but also similar mechanical properties to native vessels. In conclusion, heparinized decellularized scaffolds represent a promising direction for small-diameter vascular grafts, although further in vivo studies are needed.

Histological and Mechanical Assessment of Decellularized Porcine Biografts, and Its Biological Evaluation following Aortic Implantation during Mid-Term Follow-Up

AIMS

Prosthetic graft infection frequently requires graft replacement. Among other options, a biological graft could serve as an alternative choice. Decellularization reduces tissue immunogenicity. Our aim was to determine an efficient decellularization method and to evaluate the decellularized porcine biografts' adaptability.

METHODS

Four different protocols were implemented to decellularize porcine aortic segments (n = 4). Cell removal effectiveness and matrix structure preservation were histologically examined. Mechanical tests were performed. Decellularized porcine grafts were interpositioned in a porcine aorta. After a 6-month period, implanted samples were removed and evaluated using light and electron microscopy.

RESULTS

Histological results showed complete removal of cells and preserved connective tissue fiber structure following decellularization, using sodium dodecyl sulfate and sodium azide. Pressure tests demonstrated similar compliance to fresh vessels. In 9 out of 10 cases, pigs survived the follow-up period. Graft rejection, intimal hyperplasia, reocclusion and/or aneurysm formation were not observed. Presence of host cells and neoendothelialization were microscopically confirmed.

CONCLUSIONS

This decellularization protocol enables a cost-effective preparation of biological grafts featuring reduced immunogenicity. The implanted grafts did not degenerate during the 6-month follow-up period, the lack of graft rejection suggests acceptable immunological tolerance, while recipient cells migrate into, proliferate and differentiate, thus creating the possibility for further use as an optional vascular graft.

Donor Preconditioning After the Onset of Brain Death With Dopamine Derivate n-Octanoyl Dopamine Improves Early Posttransplant Graft Function in the Rat

Heart transplantation is the therapy of choice for end-stage heart failure. However, hemodynamic instability, which has been demonstrated in brain-dead donors (BDD), could also affect the posttransplant graft function. We tested the hypothesis that treatment of the BDD with the dopamine derivate n-octanoyl-dopamine (NOD) improves donor cardiac and graft function after transplantation. Donor rats were given a continuous intravenous infusion of either NOD (0.882 mg/kg/h, BDD+NOD, n = 6) or a physiological saline vehicle (BDD, n = 9) for 5 h after the induction of brain death by inflation of a subdural balloon catheter. Controls were sham-operated (n = 9). In BDD, decreased left-ventricular contractility (ejection fraction; maximum rate of rise of left-ventricular pressure; preload recruitable stroke work), relaxation (maximum rate of fall of left-ventricular pressure; Tau), and increased end-diastolic stiffness were significantly improved after the NOD treatment. Following the transplantation, the NOD-treatment of BDD improved impaired systolic function and ventricular relaxation. Additionally, after transplantation increased interleukin-6, tumor necrosis factor TNF-α, NF-kappaB-p65, and nuclear factor (NF)-kappaB-p105 gene expression, and increased caspase-3, TNF-α and NF-kappaB protein expression could be significantly downregulated by the NOD treatment compared to BDD. BDD postconditioning with NOD through downregulation of the pro-apoptotic factor caspase-3, pro-inflammatory cytokines, and NF-kappaB may protect the heart against the myocardial injuries associated with brain death and ischemia/reperfusion.

Cryopreserved human aortic root allografts arterial wall: Structural changes occurring during thawing

Background

The aim of our experimental work was to assess morphological changes of arterial wall that arise during different thawing protocols of a cryopreserved human aortic root allograft (CHARA) arterial wall.

Methods

The experiment was performed on CHARAs. Two thawing protocols were tested: 1, CHARAs were thawed at a room temperature at +23°C; 2, CHARAs were placed directly into a water bath at +37°C.

Microscopic samples preparation

After fixation, all samples were washed in distilled water for 5 min, and dehydrated in a graded ethanol series (70, 85, 95, and 100%) for 5 min at each level. The tissue samples were then immersed in 100% hexamethyldisilazane for 10 minutes and air dried in an exhaust hood at room temperature. Processed samples were mounted on stainless steel stubs, coated with gold.

Results

Thawing protocol 1: All 6 (100%) samples showed loss of the endothelium and damage to the subendothelial layers with randomly dispersed circular defects and micro-fractures without smooth muscle cells contractions in the tunica media.

Thawing protocol 2: All 6 (100%) samples showed loss of endothelium from the luminal surface, longitudinal corrugations in the direction of blood flow caused by smooth muscle cells contractions in the tunica media with frequent fractures in the subendothelial layer

Conclusion

All the samples thawed at the room temperature showed smaller structural damage to the CHARA arterial wall with no smooth muscle cell contraction in tunica media when compared to the samples thawed in a water bath.

Physiological and pathological left ventricular hypertrophy of comparable degree is associated with characteristic differences of in vivo hemodynamics

Left ventricular (LV) hypertrophy is a physiological or pathological response of LV myocardium to increased cardiac load. We aimed at investigating and comparing hemodynamic alterations in well-established rat models of physiological hypertrophy (PhyH) and pathological hypertrophy (PaH) by using LV pressure-volume (P-V) analysis. PhyH and PaH were induced in rats by swim training and by abdominal aortic banding, respectively. Morphology of the heart was investigated by echocardiography. Characterization of cardiac function was completed by LV P-V analysis. In addition, histological and molecular biological measurements were performed. Echocardiography revealed myocardial hypertrophy of similar degree in both models, which was confirmed by post-mortem heart weight data. In aortic-banded rats we detected subendocardial fibrosis. Reactivation of fetal gene program could be observed only in the PaH model. PhyH was associated with increased stroke volume, whereas unaltered stroke volume was detected in PaH along with markedly elevated end-systolic pressure values. Sensitive indexes of LV contractility were increased in both models, in parallel with the degree of hypertrophy. Active relaxation was ameliorated in athlete's heart, whereas it showed marked impairment in PaH. Mechanical efficiency and ventriculo-arterial coupling were improved in PhyH, whereas they remained unchanged in PaH. Myocardial gene expression of mitochondrial regulators showed marked differences between PaH and PhyH. We provided the first comparative hemodynamic characterization of PhyH and PaH in relevant rodent models. Increased LV contractility could be observed in both types of LV hypertrophy; characteristic distinction was detected in diastolic function (active relaxation) and mechanoenergetics (mechanical efficiency), which might be explained by mitochondrial differences.

Decellularized biological matrices: an interesting approach for cardiovascular tissue repair and regeneration

The repair and replacement of blood vessels is one of the most challenging topics for biomedical research. Autologous vessels are preferred as graft materials, but they still have many issues to overcome: for instance, they need multiple surgical procedures and often patients may not have healthy and surgically valuable arteries useful as an autograft. A tissue-engineering approach is widely desirable to generate biological vascular prostheses. Recently, decellularization of native tissue has gained significant attention in the biomedical research field. This method is used to obtain biological scaffolds that are expected to maintain the complex three-dimensional structure of the extracellular matrix, preserving the biomechanical properties of the native tissues. The decellularizing methods and the biomechanical characteristics of these products are presented in this review. Decellularization of biological matrices induces the loss of major histocompatibility complex (MHC), which is expected to promote an immunological response by the host. All the studies showed that decellularized biomaterials possess adequate properties for xenografting. Concerning their mechanical properties, several studies have demonstrated that, although chemical decellularization methods do not affect the scaffolds' mechanical properties, these materials can be modified through different treatments in order to provide the desired mechanical characteristics, depending on the specific application. A short overview of legislative issues concerning the use of decellularized substitutes and future perspectives in surgical applications is also presented. Copyright © 2015 John Wiley & Sons, Ltd.