Tendon Reattachment to Bone in an Ovine Tendon Defect Model of Retraction Using Allogenic and Xenogenic Demineralised Bone Matrix Incorporated with Mesenchymal Stem Cells

Understanding Fibrous Tissue in the Effective Healing of Rotator Cuff Injury

The rotator cuff is a crucial group of muscles and tendons in the shoulder complex that plays a significant role in the stabilization of the glenohumeral joint and enabling a wide range of motion. Rotator cuff tendon tears can occur due to sudden injuries or degenerative processes that develop gradually over time, whether they are partial or full thickness. These injuries are common causes of shoulder pain and functional impairment, and their complex nature highlights the essential role of the rotator cuff in shoulder function. Scar formation is a crucial aspect of the healing process initiated following a rotator cuff tendon tear, but excessive fibrous tissue development can potentially lead to stiffness, discomfort, and movement limitations. Age is a critical risk factor, with the prevalence of these tears increasing among older individuals. This comprehensive review aims to delve deeper into the anatomy and injury mechanisms of the rotator cuff. Furthermore, it will inspect the signaling pathways involved in fibrous tissue development, evaluate the various factors affecting the healing environment, and discuss proactive measures aimed at reducing excessive fibrous tissue formation. Lastly, this review identifed gaps within existing knowledge to advance methods for better management of rotator cuff tendon injuries.

Optimizing Tissue Engineering for Clinical Relevance in Rotator Cuff Repair

Rotator cuff tear (RCT) is the most common cause of disability in the upper extremity. It results in 4.5 million physician visits in the United States every year and is the most common etiology of shoulder conditions evaluated by orthopedic surgeons. Over 460,000 RCT repair surgeries are performed in the United States annually. Rotator cuff (RC) retear and failure to heal remain significant postoperative complications. Literature suggests that the retear rates can range from 29.5% to as high as 94%. Weakened and irregular enthesis regeneration is a crucial factor in postsurgical failure. Although commercially available RC repair grafts have been introduced to augment RC enthesis repair, they have been associated with mixed clinical outcomes. These grafts lack appropriate biological cues such as stem cells and signaling molecules at the bone-tendon interface. In addition, they do little to prevent fibrovascular scar tissue formation, which causes the RC to be susceptible to retear. Advances in tissue engineering have demonstrated that mesenchymal stem cells (MSCs) and growth factors (GFs) enhance RC enthesis regeneration in animal models. These models show that delivering MSCs and GFs to the site of RCT enhances native enthesis repair and leads to greater mechanical strength. In addition, these models demonstrate that MSCs and GFs may be delivered through a variety of methods including direct injection, saturation of repair materials, and loaded microspheres. Grafts that incorporate MSCs and GFs enhance anti-inflammation, osteogenesis, angiogenesis, and chondrogenesis in the RC repair process. It is crucial that the techniques that have shown success in animal models are incorporated into the clinical setting. A gap currently exists between the promising biological factors that have been investigated in animal models and the RC repair grafts that can be used in the clinical setting. Future RC repair grafts must allow for stable implantation and fixation, be compatible with current arthroscopic techniques, and have the capability to deliver MSCs and/or GFs.

Fibrocartilage extracellular matrix augmented demineralized bone matrix graft repairs tendon-to-bone interface in a rabbit tendon reconstruction model

Current tendon/ligament reconstructions integrate via scar tissue rather than proper bone-tendon interface regeneration, which affects graft longevity, changes in bone tunnel size, and functional outcomes. The purpose of this study was to develop a functional demineralized bone matrix (DBM) + fibrocartilage extracellular matrix (FCECM) composite scaffold, characterize its physicochemical properties, and evaluate its efficacy in repairing tendon-bone interface in a rabbit tendon reconstruction model. Solubilized FCECM was loaded and crosslinked on to DBM scaffolds via gamma-irradiation to create DBM + FCECM scaffolds. The resulting scaffold showed interconnected pores coated with FCECM and protein cargo similar to FCECM. The addition of FCECM modified the physicochemical properties of the DBM scaffold, including microstructure, biochemical composition, mechanical strength, thermodynamic properties, and degradation period. The DBM + FCECM scaffold was biocompatible for mesenchymal stem cells (MSCs) and resulted in elevation of fibrochondrogenic gene markers compared to DBM scaffolds in vitro. In vivo implantation of DBM + FCECM scaffold resulted in neofibrocartilage formation, better pullout strength, and less bone tunnel widening compared to DBM only group in a rabbit tendon reconstruction model. In conclusion, the FCECM augmented DBM scaffold repairs the tendon-bone interface with osseous-fibrocartilage tissue, which may be utilized to improve current tendon reconstruction surgeries.

Strategies for promoting tendon-bone healing: Current status and prospects

Tendon-bone insertion (TBI) injuries are common, primarily involving the rotator cuff (RC) and anterior cruciate ligament (ACL). At present, repair surgery and reconstructive surgery are the main treatments, and the main factor determining the curative effect of surgery is postoperative tendon-bone healing, which requires the stable combination of the transplanted tendon and the bone tunnel to ensure the stability of the joint. Fibrocartilage and bone formation are the main physiological processes in the bone marrow tract. Therefore, therapeutic measures conducive to these processes are likely to be applied clinically to promote tendon-bone healing. In recent years, biomaterials and compounds, stem cells, cell factors, platelet-rich plasma, exosomes, physical therapy, and other technologies have been widely used in the study of promoting tendon-bone healing. This review provides a comprehensive summary of strategies used to promote tendon-bone healing and analyses relevant preclinical and clinical studies. The potential application value of these strategies in promoting tendon-bone healing was also discussed.

Large animal models for the study of tendinopathy

Tendinopathy has a high incidence in athletes and the aging population. It can cause pain and movement disorders, and is one of the most difficult problems in orthopedics. Animal models of tendinopathy provide potentially efficient and effective means to develop understanding of human tendinopathy and its underlying pathological mechanisms and treatments. The selection of preclinical models is essential to ensure the successful translation of effective and innovative treatments into clinical practice. Large animals can be used in both micro- and macro-level research owing to their similarity to humans in size, structure, and function. This article reviews the application of large animal models in tendinopathy regarding injuries to four tendons: rotator cuff, patellar ligament, Achilles tendon, and flexor tendon. The advantages and disadvantages of studying tendinopathy with large animal models are summarized. It is hoped that, with further development of animal models of tendinopathy, new strategies for the prevention and treatment of tendinopathy in humans will be developed.

Optimal Management of Partial Thickness Rotator Cuff Tears: Clinical Considerations and Practical Management

Partial thickness rotator cuff tears have been diagnosed with increased frequency due to heightened awareness and an improvement in diagnostic modalities. When >50% of the tendon thickness has ruptured, intra-tendinous strain of the residual tendon increases. Surgery is generally confined to patients who have failed non-operative measures and have persistent symptoms. The rationale for repairing partial thickness tears lies in their limited self-healing capacity, and propensity to enlarge over time and progress to a full thickness defect. Although tear debridement and acromioplasty can improve pain and function, tear progression can occur, in addition to worse results being noted in bursal-sided defects. Several surgical strategies have been recommended but there is a lack of evidence to advocate one form of treatment over another. The aim of this narrative review is to discuss the treatment options for partial thickness tears of the rotator cuff.

Segmentally Demineralized Cortical Bone With Stem Cell-Derived Matrix Promotes Proliferation, Migration and Differentiation of Stem Cells in vitro

A recent study has shown that demineralized cortical bone (DCB) did not improve the healing of tendon-bone interface. Considering that there is a gradient of mineral content in the tendon-bone interface, we designed a segmentally demineralized cortical bone (sDCB) scaffold with two different regions: undemineralized cortical bone section within the scaffold (sDCB-B) and complete demineralized cortical bone section within the scaffold (sDCB-D), to mimic the natural structure of the tendon-bone interface. Furthermore, the extracellular matrix (ECM) from tendon-derived stem cells (TDSCs) was used to modify the sDCB-D region of sDCB to construct a novel scaffold (sDCB-ECM) for enhancing the bioactivity of the sDCB-D. The surface topography, elemental distribution, histological structure, and surface elastic modulus of the scaffold were observed using scanning electron microscopy, energy-dispersive X-ray spectroscopy, Fourier transform infrared spectroscopy, histological staining and atomic force microscopy. Cell proliferation of bone marrow mesenchymal stem cells (BMSCs) and TDSCs cultured on scaffolds was evaluated using the Cell Counting kit-8, and cell viability was assessed by Live/Dead cell staining. Cell morphology was detected by fluorescent staining. The ability of the scaffolds to recruit stem cells was tested using transwell migration assay. The expression levels of bone-, cartilage- and tendon-related genes and proteins in stem cells were assessed by the polymerase chain reaction and western blotting. Our results demonstrated that there was a gradient of Ca and P elements in sDCB, and TDSC-derived ECM existed on the surface of the sDCB-D region of sDCB. The sDCB-ECM could promote stem cell proliferation and migration. Moreover, the sDCB-B region of sDCB-ECM could stimulate osteogenic and chondrogenic differentiation of BMSCs, and the sDCB-D-ECM region of sDCB-ECM could stimulate chondrogenic and tenogenic differentiation of TDSCs when compared to DCB. Our study indicated that sDCB-ECM might be a potential bioscaffold to enhance the tendon-bone interface regeneration.

Anterior Cruciate Ligament Reconstruction: Is Biological Augmentation Beneficial?

Surgical reconstruction in anterior cruciate ligament (ACL) ruptures has proven to be a highly effective technique that usually provides satisfactory results. However, despite the majority of patients recovering their function after this procedure, ACL reconstruction (ACLR) is still imperfect. To improve these results, various biological augmentation (BA) techniques have been employed mostly in animal models. They include: (1) growth factors (bone morphogenetic protein, epidermal growth factor, granulocyte colony-stimulating factor, basic fibroblast growth factor, transforming growth factor-β, hepatocyte growth factor, vascular endothelial growth factor, and platelet concentrates such as platelet-rich plasma, fibrin clot, and autologous conditioned serum), (2) mesenchymal stem cells, (3) autologous tissue, (4) various pharmaceuticals (matrix metalloproteinase-inhibitor alpha-2-macroglobulin bisphosphonates), (5) biophysical/environmental methods (hyperbaric oxygen, low-intensity pulsed ultrasound, extracorporeal shockwave therapy), (6) biomaterials (fixation methods, biological coatings, biosynthetic bone substitutes, osteoconductive materials), and (7) gene therapy. All of them have shown good results in experimental studies; however, the clinical studies on BA published so far are highly heterogeneous and have a low degree of evidence. The most widely used technique to date is platelet-rich plasma. My position is that orthopedic surgeons must be very cautious when considering using PRP or other BA methods in ACLR.

Hierarchically Demineralized Cortical Bone Combined With Stem Cell-Derived Extracellular Matrix for Regeneration of the Tendon-Bone Interface

BACKGROUND

Poor healing of the tendon-bone interface after rotator cuff repair is one of the main causes of surgical failure. Previous studies demonstrated that demineralized cortical bone (DCB) could improve healing of the enthesis.

PURPOSE

To evaluate the outcomes of hierarchically demineralized cortical bone (hDCB) coated with stem cell-derived extracellular matrix (hDCB-ECM) in the repair of the rotator cuff in a rabbit model.

STUDY DESIGN

Controlled laboratory study.

METHODS

Tendon-derived stem cells (TDSCs) were isolated, cultured, and identified. Then, hDCB was prepared by the graded demineralization procedure. Finally, hDCB-ECM was fabricated via 2-week cell culture and decellularization, and the morphologic features and biochemical compositions of the hDCB-ECM were evaluated. A total of 24 rabbits (48 samples) were randomly divided into 4 groups: control, DCB, hDCB, and hDCB-ECM. All rabbits underwent bilateral detachment of the infraspinatus tendon, and the tendon-bone interface was repaired with or without scaffolds. After surgery, 8 rabbits were assessed by immunofluorescence staining at 2 weeks, and the others were assessed by micro-computed tomography (CT) examination, immunohistochemical staining, histological staining, and biomechanical testing at 12 weeks.

RESULTS

TDSCs were identified to have universal stem cell characteristics including cell markers, clonogenicity, and multilineage differentiation. The hDCB-ECM contained 3 components (bone, partial DCB, and DCB coated with ECM) with a gradient of calcium and phosphorus elements, and the ECM had stromal cell-derived factor 1, biglycan, and fibromodulin. Macroscopic observations demonstrated the absence of infection and rupture around the enthesis. The results of immunofluorescence staining showed that hDCB-ECM promoted stromal cell recruitment. Results of micro-CT analysis, immunohistochemical staining, and histological staining showed that hDCB-ECM enhanced bone and fibrocartilage formation at the tendon-bone interface. Biomechanical analysis showed that the hDCB-ECM group had higher ultimate tensile stress and Young modulus than the DCB group.

CONCLUSION

The administration of hDCB-ECM promoted healing of the tendon-bone interface.

CLINICAL RELEVANCE

hDCB-ECM could provide useful information for the design of scaffolds to repair the tendon-bone interface, and further studies are needed to determine its effectiveness.

Biomimetic strategies for tendon/ligament-to-bone interface regeneration

Tendon/ligament-to-bone healing poses a formidable clinical challenge due to the complex structure, composition, cell population and mechanics of the interface. With rapid advances in tissue engineering, a variety of strategies including advanced biomaterials, bioactive growth factors and multiple stem cell lineages have been developed to facilitate the healing of this tissue interface. Given the important role of structure-function relationship, the review begins with a brief description of enthesis structure and composition. Next, the biomimetic biomaterials including decellularized extracellular matrix scaffolds and synthetic-/natural-origin scaffolds are critically examined. Then, the key roles of the combination, concentration and location of various growth factors in biomimetic application are emphasized. After that, the various stem cell sources and culture systems are described. At last, we discuss unmet needs and existing challenges in the ideal strategies for tendon/ligament-to-bone regeneration and highlight emerging strategies in the field.

Caprine demineralized bone matrix (DBMc) in the repair of non-critical bone defects in rabbit tibias. A new bone xenograft

Purpose

To evaluate the use of demineralized bone matrix of caprine origin in experimental bone defects of the tibia in New Zealand rabbits.

Methods

Fragments of the tibia diaphysis were collected aseptically from clinically healthy goats. The bones were sectioned into 1 cm fragments and stored at -20°C for subsequent hydrochloric acid (HCL) demineralization. A 70 mg portion of DBMc was used to fill the experimental bone defects. Twenty-four female adult New Zealand rabbits were divided into 2 groups: the MG (matrix group, left tibia) and CG (control group, right tibia). Additionally, they were separated into 4 groups with 6 animals, according to the period of analysis (15, 30, 60 and 90 days postoperatively). Using microCT, volumetric parameters were evaluated: bone volume, relationship between bone volume and total volume, bone surface area, relationship between bone surface area and total volume, number of trabeculae, trabecular thickness and trabecular separation.

Results

There was a statistically significant difference (P<0.05) between groups considering bone volume (BV) and bone:total volume (BV/TV), on 15, 30 and 90 days postoperatively. Control group showed a statistically significant superiority (P < 0.05) considering the mean of the variables bone surface (BS), number of trabeculae (Tb.N) and between bone surface and total volume (BS/TV) at 15 and 90 days.

Conclusions

Caprine demineralized bone matrix was safe and tolerable. No signs of material rejection were seen macroscopically. It is an alternative for the treatment of bone defects when autologous graft is not available or in insufficient quantities.

Characterisation of the tensile properties of Demineralised Cortical Bone when used as an anterior cruciate ligament allograft

BACKGROUND

Graft choice in anterior cruciate ligament (ACL) reconstruction remains controversial and some grafts fail due to inadequate osteointegration. Demineralised cortical bone (DCB) is an osteoinductive collagen-based scaffold. The aim of this study was to measure the tensile properties of DCB from different locations and from different ages, and determine its compatibility with current ACL fixation systems.

METHODS

The tensile properties of DCB manufactured from femur and tibia of young (9 month) and old (2-3 years) sheep was measured to determine the most appropriate graft choice. The ultimate load and stiffness of DCB allograft using two fixation systems, interference screws and sutures tied around screw posts, was measured ex vivo in an ovine ACL reconstruction model. Comparison was made with superficial digital flexor tendon (SDFT) and ovine ACL.

RESULTS

DCB derived from young tibia had the highest ultimate load and stiffness of 67.7 ± 10.6 N and 130.2 ± 64.3 N/mm respectively. No DCB fixation system reached the published peak in vivo force through the ovine ACL of 150 N. SDFT fixation with interference screws (308.2 ± 87.3 N) did reach the in vivo threshold but was significantly weaker than ovine ACL (871.0 ± 64.2 N).

CONCLUSION

The tensile properties of DCB were influenced by the donor age and bone. Owing to inferior tensile properties and incompatibility with suspensory fixation devices, this study indicates DCB is inferior to current tendon grafts options for ACL reconstruction.

Decellularized porcine xenograft for anterior cruciate ligament reconstruction: A histological study in sheep comparing cross-pin and cortical suspensory femoral fixation

Aims

To evaluate graft healing of decellularized porcine superflexor tendon (pSFT) xenograft in an ovine anterior cruciate ligament (ACL) reconstruction model using two femoral fixation devices. Also, to determine if pSFT allows functional recovery of gait as compared with the preoperative measurements.

Methods

A total of 12 sheep underwent unilateral single-bundle ACL reconstruction using pSFT. Two femoral fixation devices were investigated: Group 1 (n = 6) used cortical suspensory fixation (Endobutton CL) and Group 2 (n = 6) used cross-pin fixation (Stratis ST). A soft screw was used for tibial fixation. Functional recovery was quantified using force plate analysis at weeks 5, 8, and 11. The sheep were euthanized after 12 weeks and comprehensive histological analysis characterized graft healing at the graft-bone interface and the intra-articular graft (ligamentization).

Results

The pSFT remodelled into a ligament-like structure and no adverse inflammatory reaction was seen. The ground reaction force in the operated leg of the Endobutton group was higher at 11 weeks (p < 0.05). An indirect insertion was seen at the graft-bone interface characterized by Sharpey-like fibres. Qualitative differences in tendon remodelling were seen between the two groups, with greater crimp-like organization and more aligned collagen fibres seen with Endobutton fixation. One graft rupture occurred in the cross-pin group, which histologically showed low collagen organization.

Conclusion

Decellularized pSFT xenograft remodels into a ligament-like structure after 12 weeks and regenerates an indirect-type insertion with Sharpey-like fibres. No adverse inflammatory reaction was observed. Cortical suspensory femoral fixation was associated with more enhanced graft remodelling and earlier functional recovery when compared with the stiffer cross-pin fixation.

Wogonin inhibits cell cycle progression by activating the glycogen synthase kinase-3 beta in hepatocellular carcinoma

BACKGROUND

Wogonin has been reported to exhibit various biological activities such as anti-inflammation, anti-microbial, and anti-tumor. Previous studies have demonstrated that wogonin could down-regulate Cyclin D1 activity on multiple cancers. However, the related mechanisms have not been fully elucidated so far.

PURPOSE

The aim of the current study was to explore whether wogonin can suppress hepatocellular carcinoma (HCC) progression and the mechanism of wogonin in inhibiting Cyclin D1 expression.

METHODS

Herein, we assessed the anti-tumor activity of wogonin against hepatocellular carcinoma (HCC) by MTT assay, clonogenic assay, cell cycle analysis and orthotopic xenograft mouse models. Western blot, immunofluoscence assay, co-immunoprecipitation assay, docking program, surface plasmon resonance, site-directed mutagenesis assay and immunohistochemical assay were performed for exploring the underlying mechanisms of wogonin-induced growth inhibition in HCC.

RESULTS

Our results showed that non-toxic dosage of wogonin (10, 20 µM) could inhibit cells proliferation and suppress cells cycle progression in MHCC97L and HepG2 cell. Moreover, the findings from the western blot and immunofluoscence assay confirmed the inhibition action of wogonin (10, 20 µM) on Cyclin D1 expression in MHCC97L cells, and wogonin (10, 20 µM) pre-treatment was capable of promoting Cyclin D1 ubiquitination and degradation in MHCC97L cell. In addition, wogonin promoted phosphorylation of Cyclin D1 on threonine-286 site, the mutation of threonine-286 to alanine-286A blocked Cyclin D1 proteolysis induced by wogonin. Wogonin-promoted Cyclin D1 phosphorylation and subsequent proteolysis may associate with the activation of GSK3beta in cancer cells. The phosphorylated form of GSK3beta (active form) expression was significantly increased after wogonin (20 µM) exposure. Molecular docking study and Biacore SPR analysis of GSK3beta mutant further validated the high-affinity wogonin binding site on GSK3beta. Moreover, in vivo studies further confirmed that phospho-GSK3beta Tyr216 was over-expressed in HCC specimens after wogonin treatment while the amount of Cyclin D1 was significantly decreased.

CONCLUSION

In summary, our data reveal a novel molecular mechanism by which wogonin induces HCC cells cycle arrest and suppresses tumor proliferation.

Small Molecules Enhance Scaffold-Based Bone Grafts via Purinergic Receptor Signaling in Stem Cells

The need for bone grafts is high, due to age-related diseases, such as tumor resections, but also accidents, risky sports, and military conflicts. The gold standard for bone grafting is the use of autografts from the iliac crest, but the limited amount of accessible material demands new sources of bone replacement. The use of mesenchymal stem cells or their descendant cells, namely osteoblast, the bone-building cells and endothelial cells for angiogenesis, combined with artificial scaffolds, is a new approach. Mesenchymal stem cells (MSCs) can be obtained from the patient themselves, or from donors, as they barely cause an immune response in the recipient. However, MSCs never fully differentiate in vitro which might lead to unwanted effects in vivo. Interestingly, purinergic receptors can positively influence the differentiation of both osteoblasts and endothelial cells, using specific artificial ligands. An overview is given on purinergic receptor signaling in the most-needed cell types involved in bone metabolism-namely osteoblasts, osteoclasts, and endothelial cells. Furthermore, different types of scaffolds and their production methods will be elucidated. Finally, recent patents on scaffold materials, as wells as purinergic receptor-influencing molecules which might impact bone grafting, are discussed.

Biological augmentation of graft healing in anterior cruciate ligament reconstruction: a systematic review

Aims

The success of anterior cruciate ligament reconstruction (ACLR) depends on osseointegration at the graft-tunnel interface and intra-articular ligamentization. Our aim was to conduct a systematic review of clinical and preclinical studies that evaluated biological augmentation of graft healing in ACLR.

Materials and Methods

In all, 1879 studies were identified across three databases. Following assessment against strict criteria, 112 studies were included (20 clinical studies; 92 animal studies).

Results

Seven categories of biological interventions were identified: growth factors, biomaterials, stem cells, gene therapy, autologous tissue, biophysical/environmental, and pharmaceuticals. The methodological quality of animal studies was moderate in 97%, but only 10% used clinically relevant outcome measures. The most interventions in clinical trials target the graft-tunnel interface and are applied intraoperatively. Platelet-rich plasma is the most studied intervention, but the clinical outcomes are mixed, and the methodological quality of studies was suboptimal. Other biological therapies investigated in clinical trials include: remnant-augmented ACLR; bone substitutes; calcium phosphate-hybridized grafts; extracorporeal shockwave therapy; and adult autologus non-cultivated stem cells.

Conclusion

There is extensive preclinical research supporting the use of biological therapies to augment ACLR. Further clinical studies that meet the minimum standards of reporting are required to determine whether emerging biological strategies will provide tangible benefits in patients undergoing ACLR. Cite this article: Bone Joint J 2018;100-B:271-84.

Regenerative Engineering of the Rotator Cuff of the Shoulder

Rotator cuff tears often heal poorly, leading to re-tears after repair. This is in part attributed to the low proliferative ability of the resident cells (tendon fibroblasts and tendon-stem cells) upon injury to the rotator cuff tissue and the low vascularity of the tendon insertion. In addition, surgical outcomes of current techniques used in clinical settings are often suboptimal, leading to the formation of neo-tissue with poor biomechanics and structural characteristics, which results in re-tears. This has prompted interest in a new approach, which we term as "Regenerative Engineering", for regenerating rotator cuff tendons. In the Regenerative Engineering paradigm, roles played by stem cells, scaffolds, growth factors/small molecules, the use of local physical forces, and morphogenesis interplayed with clinical surgery techniques may synchronously act, leading to synergistic effects and resulting in successful tissue regeneration. In this regard, various cell sources such as tendon fibroblasts and adult tissue-derived stem cells have been isolated, characterized, and investigated for regenerating rotator cuff tendons. Likewise, numerous scaffolds with varying architecture, geometry, and mechanical characteristics of biologic and synthetic origin have been developed. Furthermore, these scaffolds have been also fabricated with biochemical cues (growth factors and small molecules), facilitating tissue regeneration. In this Review, various strategies to regenerate rotator cuff tendons using stem cells, advanced materials, and factors in the setting of physical forces under the Regenerative Engineering paradigm are described.

Application of a Demineralized Cortical Bone Matrix and Bone Marrow-Derived Mesenchymal Stem Cells in a Model of Chronic Rotator Cuff Degeneration

BACKGROUND

The success of rotator cuff repair is primarily dependent on tendon-bone healing. Failure is common because weak scar tissue replaces the native enthesis, rendering it prone to reruptures. A demineralized bone matrix (DBM) consists of a network of collagen fibers that provide a sustained release of growth factors such as bone morphogenetic proteins. Previous studies have demonstrated that it can regenerate a fibrocartilaginous enthesis.

HYPOTHESIS

The use of a DBM and mesenchymal stem cells (MSCs) at the healing enthesis will result in a higher bone mineral density at the tendon insertion and will enhance the regeneration of a morphologically superior enthesis when compared with an acellular human dermal matrix.

STUDY DESIGN

Controlled laboratory study.

METHODS

Eighteen female Wistar rats underwent unilateral detachment of the supraspinatus tendon. Three weeks later, tendon repair was carried out in animals randomized into 3 groups: group 1 received augmentation of the repair with a cortical allogenic DBM (n = 6); group 2 received augmentation with a nonmeshed, ultrathick, acellular human dermal matrix (n = 6); and group 3 underwent tendon-bone repair without a scaffold (n = 6). All animals received 1 × 10⁶ MSCs delivered in fibrin glue to the repair site. Specimens were retrieved at 6 weeks postoperatively for histological analysis and the evaluation of bone mineral density.

RESULTS

All groups demonstrated closure of the tendon-bone gap with a fibrocartilaginous enthesis. Although there were no significant differences in the enthesis maturation and modified Movin scores, repair augmented with a dermal matrix + MSCs exhibited a disorganized enthesis, abnormal collagen fiber arrangement, and greater cellularity compared with other MSC groups. Only repairs augmented with a DBM + MSCs reached a bone mineral density not significantly lower than nonoperated controls.

CONCLUSION

A DBM enhanced with MSCs can augment rotator cuff healing at 6 weeks and restore bone mineral density at the enthesis to its preinjury levels.

CLINICAL RELEVANCE

Biological augmentation of rotator cuff repair with a DBM and MSCs may reduce the incidence of retears, although further studies are required to determine its effectiveness.

Demineralized Bone Matrix to Augment Tendon-Bone Healing: A Systematic Review

Background:

Following injury to the rotator cuff and anterior cruciate ligament, a direct enthesis is not regenerated, and healing occurs with biomechanically inferior fibrous tissue. Demineralized bone matrix (DBM) is a collagen scaffold that contains growth factors and is a promising biological material for tendon and ligament repair because it can regenerate a direct fibrocartilaginous insertion via endochondral ossification.

Purpose:

To provide a comprehensive review of the literature investigating the use of DBM to augment tendon-bone healing in tendon repair and anterior cruciate ligament reconstruction (ACLR).

Study Design:

Systematic review.

Methods:

Electronic databases (MEDLINE and EMBASE) were searched for preclinical and clinical studies that evaluated the use of DBM in tendon repair and ACLR. Search terms included the following: (“demineralized bone matrix” OR “demineralized cortical bone”) AND (“tissue scaffold” OR “tissue engineering” OR “ligament” OR “tendon” OR “anterior cruciate ligament” OR “rotator cuff”). Peer-reviewed articles written in English were included, and no date restriction was applied (searches performed February 10, 2017). Methodological quality was assessed with peer-reviewed scoring criteria.

Results:

The search strategy identified 339 articles. After removal of duplicates and screening according to inclusion criteria, 8 studies were included for full review (tendon repair, n = 4; ACLR, n = 4). No human clinical studies were identified. All 8 studies were preclinical animal studies with good methodological quality. Five studies compared DBM augmentation with non-DBM controls, of which 4 (80%) reported positive findings in terms of histological and biomechanical outcomes.

Conclusion:

Preclinical evidence indicates that DBM can improve tendon-bone healing, although clinical studies are lacking. A range of animal models of tendon repair and ACLR showed that DBM can re-create a direct fibrocartilaginous enthesis, although the animal models are not without limitations. Before clinical trials are justified, research is required that determines the best source of DBM (allogenic vs xenogenic) and the best form of DBM (demineralized cortical bone vs DBM paste) to be used in them.

The effectiveness of demineralized cortical bone matrix in a chronic rotator cuff tear model

BACKGROUND

The purpose of this study was to assess the effect of demineralized bone matrix (DBM) on rotator cuff tendon-bone healing. The hypothesis was that compared with a commercially available dermal matrix scaffold, DBM would result in a higher bone mineral density and regenerate a morphologically superior enthesis in a rat model of chronic rotator cuff degeneration.

METHODS

Eighteen female Wistar rats underwent unilateral detachment of the supraspinatus tendon. Three weeks later, tendon repair was carried out in animals randomized into 3 groups: group 1 animals were repaired with DBM (n = 6); group 2 received augmentation with the dermal scaffold (n = 6); and group 3 (controls) underwent nonaugmented tendon-bone repair (n = 6). Specimens were retrieved at 6 weeks postoperatively for histologic analysis and evaluation of bone mineral density.

RESULTS

No failures of tendon-bone healing were noted throughout the study. All groups demonstrated closure of the tendon-bone gap with a fibrocartilaginous interface. Dermal collagen specimens exhibited a disorganized structure with significantly more abnormal collagen fiber arrangement and cellularity than in the DBM-based repairs. Nonaugmented repairs exhibited a significantly higher bone mineral density than in DBM and the dermal collagen specimens and were not significantly different from control limbs that were not operated on.

CONCLUSION

The application of DBM to a rat model of chronic rotator cuff degeneration did not improve the composition of the healing enthesis compared with nonaugmented controls and a commercially available scaffold. However, perhaps the most important finding of this study was that the control group demonstrated a similar outcome to augmented repairs.