Development of an R4 dual-site (R4DS) gateway cloning system enabling the efficient simultaneous cloning of two desired sets of promoters and open reading frames in a binary vector for plant research

Taxonomic implications of normal and abnormal stomatal complexes in Indigofera L. (Indigofereae, Faboideae, Fabaceae)

This study is the first to report the foliar and stem epidermal micro-morphology of 13 taxa of Indigofera L. (Fabaceae) using light (LM) and scanning electron microscopy (SEM). The micro-morphological characteristics studied here are related to the epidermal cell shape, size, frequency, anticlinal wall pattern, and stomatal complex types, size, position, frequency, and index. The study revealed 19 major normal stomatal types with eight subtypes and seven major abnormal stomatal types with 13 subtypes. The stomatal index was lower on the abaxial leaf surface than on the adaxial surface. Notably, the adaxial surface of I. hochstetteri had the highest stomatal index (27.46%), while the abaxial surface of I. oblongifolia had the lowest (9.95%). The adaxial surface of I. hochstetteri also displayed the highest average stomatal frequency (38.67), while the adaxial surface of I. spinosa had the lowest average frequency (9.37). SEM analysis revealed that most leaves had slightly sunken to sunken stomata, while stem stomata were positioned at the same level as epidermal cells in most taxa. Indigofera's foliar and stem epidermal anatomy recommends their application as baseline data coupled with other taxonomic data for the delimitation and differentiation of closely related taxa in the genus. The study provides a comprehensive description, illustrations, images, and micrographs of the stomatal types, as well as a taxonomic key for distinguishing the studied taxa of Indigofera.

Targeted expression of bgl23-D, a dominant-negative allele of ATCSLD5, affects cytokinesis of guard mother cells and exine formation of pollen in Arabidopsis thaliana

Targeted expression of bgl23-D, a dominant-negative allele of ATCSLD5, is a useful genetic approach for functional analysis of ATCSLDs in specific cells and tissues in plants. Stomata are key cellular structures for gas and water exchange in plants and their development is influenced by several genes. We found the A. thaliana bagel23-D (bgl23-D) mutant showing abnormal bagel-shaped single guard cells. The bgl23-D was a novel dominant mutation in the A. thaliana cellulose synthase-like D5 (ATCSLD5) gene that was reported to function in the division of guard mother cells. The dominant character of bgl23-D was used to inhibit ATCSLD5 function in specific cells and tissues. Transgenic A. thaliana expressing bgl23-D cDNA with the promoter of stomata lineage genes, SDD1, MUTE, and FAMA, showed bagel-shaped stomata as observed in the bgl23-D mutant. Especially, the FAMA promoter exhibited a higher frequency of bagel-shaped stomata with severe cytokinesis defects. Expression of bgl23-D cDNA in the tapetum with SP11 promoter or in the anther with ATSP146 promoter induced defects in exine pattern and pollen shape, novel phenotypes that were not shown in the bgl23-D mutant. These results indicated that bgl23-D inhibited unknown ATCSLD(s) that exert the function of exine formation in the tapetum. Furthermore, transgenic A. thaliana expressing bgl23-D cDNA with SDD1, MUTE, and FAMA promoters showed enhanced rosette diameter and increased leaf growth. Taken together, these findings suggest that the bgl23-D mutation could be a helpful genetic tool for functional analysis of ATCSLDs and manipulating plant growth.

Combined fluorescent seed selection and multiplex CRISPR/Cas9 assembly for fast generation of multiple Arabidopsis mutants

BACKGROUND

Multiplex CRISPR-Cas9-based genome editing is an efficient method for targeted disruption of gene function in plants. Use of CRISPR-Cas9 has increased rapidly in recent years and is becoming a routine method for generating single and higher order Arabidopsis thaliana mutants. Low entry, reliable assembly of CRISPR/Cas9 vectors and efficient mutagenesis is necessary to enable a maximum of researchers to break through the genetic redundancy within plant multi-gene families and allow for a plethora of gene function studies that have been previously unachievable. It will also allow routine de novo generation of mutations in ever more complex genetic backgrounds that make introgression of pre-existing alleles highly cumbersome.

RESULTS

To facilitate rapid and efficient use of CRISPR/Cas9 for Arabidopsis research, we developed a CRISPR/Cas9-based toolbox for generating mutations at multiple genomic loci, using two-color fluorescent seed selection. In our system, up-to eight gRNAs can be routinely introduced into a binary vector carrying either a FastRed, FastGreen or FastCyan fluorescent seed selection cassette. FastRed and FastGreen binary vectors can be co-transformed as a cocktail via floral dip to introduce sixteen gRNAs at the same time. The seeds can be screened either for red or green fluorescence, or for the presence of both colors. Importantly, in the second generation after transformation, Cas9 free plants are identified simply by screening the non-fluorescent seeds. Our collection of binary vectors allows to choose between two widely-used promoters to drive Cas enzymes, either the egg cell-specific (pEC1.2) from A. thaliana or the constitutive promoter from Petroselinum crispum (PcUBi4-2). Available enzymes are "classical" Cas9 codon-optimized for A. thaliana and a recently reported, intron-containing version of Cas9 codon-optimized for Zea mays, zCas9i. We observed the highest efficiency in producing knockout phenotypes by using intron-containing zCas9i driven under egg-cell specific pEC1.2 promoter. Finally, we introduced convenient restriction sites flanking promoter, Cas9 and fluorescent selection cassette in some of the T-DNA vectors, thus allowing straightforward swapping of all three elements for further adaptation and improvement of the system.

CONCLUSION

A rapid, simple and flexible CISPR/Cas9 cloning system was established that allows assembly of multi-guide RNA constructs in a robust and reproducible fashion, by avoiding generation of very big constructs. The system enables a flexible, fast and efficient screening of single or higher order A. thaliana mutants.

Expression analysis of genes encoding malectin-like domain (MLD)- and leucine-rich repeat (LRR)- containing proteins in Arabidopsis thaliana

Malectin is a maltose-binding endoplasmic reticulum protein conserved in animals. In Arabidopsis thaliana, we identified four genes that encode malectin-like domain (MLD)- and leucine-rich repeat (LRR)-containing proteins (AtMLLRs): two were receptor-like proteins (AtMLLR1 and 2) and the other two were extracellular proteins (AtMLLR3 and 4). The promoter:G3GFP+promoter:GUS assay indicated the organ- and cell-specific expression of the AtMLLR2 and AtMLLR3 genes.Abbreviations: Cm^r: chloramphenicol-resistance marker; G3GFP: G3 green fluorescent protein; GUS: β-glucuronidase; KD: kinase domain; LRR: leucine-rich repeat; MLD: malectin-like domain; RLK: receptor-like kinase; SP: signal peptide; TMD: transmembrane domain; Tnos: nopaline synthase terminator.

Novel gateway binary vectors for rapid tripartite DNA assembly and promoter analysis with various reporters and tags in the liverwort Marchantia polymorpha

The liverwort Marchantia polymorpha is an emerging model species for basal lineage plant research. In this study, two Gateway cloning-compatible binary vector series, R4pMpGWB and R4L1pMpGWB, were generated to facilitate production of transgenic M. polymorpha. The R4pMpGWB series allows tripartite recombination of any promoter and any coding sequence with a specific reporter or tag. Reporters/tags for the R4pMpGWB series are GUS, ELuc(PEST), FLAG, 3×HA, 4×Myc, mRFP1, Citrine, mCitrine, ER-targeted mCitrine and nucleus-targeted mCitrine. The R4L1pMpGWB series is suitable for promoter analysis. R4L1pMpGWB vector structure is the same as that of R4pMpGWB vectors, except that the attR2 site is replaced with attL1, enabling bipartite recombination of any promoter with a reporter or tag. Reporters/tags for the R4L1pMpGWB series are GUS, G3GFP-GUS, LUC, ELuc(PEST), Citrine, mCitrine, ER-targeted mCitrine and mCitrine-NLS. Both vector series were functional in M. polymorpha cells. These vectors will facilitate the design and assembly of plasmid constructs and generation of transgenic M. polymorpha.

The Arabidopsis COPII components, AtSEC23A and AtSEC23D, are essential for pollen wall development and exine patterning

The specialized multilayered pollen wall plays multiple roles to ensure normal microspore development. The major components of the pollen wall (e.g. sporopollenin and lipidic precursors) are provided from the tapetum. Material export from the endoplasmic reticulum (ER) is mediated by coat protein complex II (COPII) vesicles. The Arabidopsis thaliana genome encodes seven homologs of SEC23, a COPII component. However, the functional importance of this diversity remains elusive. Here, we analyzed knockout and knockdown lines for AtSEC23A and AtSEC23D, two of the A. thaliana SEC23 homologs, respectively. Single atsec23a and atsec23d mutant plants, despite normal fertility, showed an impaired exine pattern. Double atsec23ad mutant plants were semi-sterile and exhibited developmental defects in pollen and tapetal cells. Pollen grains of atsec23ad had defective exine and intine, and showed signs of cell degeneration. Moreover, the development of tapetal cells was altered, with structural abnormalities in organelles. AtSEC23A and AtSEC23D exhibited the characteristic localization pattern of COPII proteins and were highly expressed in the tapetum. Our work suggests that AtSEC23A and AtSEC23D may organize pollen wall development and exine patterning by regulating ER export of lipids and proteins necessary for pollen wall formation. Also, our results shed light on the functional heterogeneity of SEC23 homologs.