Effects of functionalized multi-walled carbon nanotubes on toxicity and bioaccumulation of lead in Daphnia magna

Ce-Doped TiO2 Fabricated Glassy Carbon Electrode for Efficient Hydrogen Evolution Reaction in Acidic Medium

The quest for sustainable and clean energy sources has intensified research on the Hydrogen Evolution Reaction (HER) in recent decades. In this study, we have presented a novel Ce-doped TiO2 catalyst synthesized through the sol-gel method, showcasing its potential as a superior electrocatalyst for HER in an acidic medium. Comprehensive characterization through X-ray diffraction (XRD), X-ray photoelectron spectroscopy (XPS), Energy dispersive X-ray (EDX), and Raman spectroscopy confirms the successful formation of the catalyst. Electrocatalytic performance evaluation, including open circuit potential (OCP), electrochemical impedance spectroscopy (EIS), and Tafel analysis, demonstrates that GCE-5wt.%CeTiO2 outperforms bare GCE, as well as Ce and TiO2-based electrodes. Kinetic investigations reveal a Tafel slope of 105 mV dec-1, indicating the Volmer step as the rate-determining step. The onset potential for HER at GCE-5wt.%CeTiO2 is -0.16 V vs. RHE, close to the platinum electrode. Notably, the catalyst exhibits a low overpotential of 401 mV to achieve a current density of 10 mA cm-2 with an impressive 95 % Faradaic efficiency. Furthermore, the catalyst demonstrates outstanding durability, maintaining a negligible increase in overpotential during a 14-hour chronoamperometry test. These results have far-reaching implications for the development of cost-effective and efficient electrocatalysts for hydrogen production.

Photocatalytic degradation of chlorazol yellow dye under sunlight irradiation using Ce, Bi, and N co-doped TiO2 photocatalyst in neutral medium

Chlorazol yellow (CY) is a commonly used anionic, toxic, mutagenic, and potentially carcinogenic azo dye, which is menacing to the environment, aquatic system, food chain, and human health as well. To remove CY dye molecules from an aqueous medium, a series of Ce, Bi, and N co-doped TiO₂ photocatalysts were prepared by varying the composition of the dopants. Under sunlight irradiation, the resultant 5 wt% (Ce-Bi-N) co-doped TiO₂ composite catalyst was found to show the best catalytic activity. Hence, the required characterization of this catalyst was performed systematically using energy-dispersive X-ray spectroscopy (EDX), scanning electron microscope (SEM), Fourier-transform infrared spectroscopy (FTIR), X-ray photoelectron spectroscopy (XPS), and X-ray diffraction (XRD) techniques. From the thorough investigation, it is revealed that the CY molecules reached adsorption-desorption equilibrium onto the surface of the catalyst within 30 min following second-order kinetics. Herein, the catalyst attained 97% degradation when exposed to sunlight at neutral (pH ~ 7, [CY] = 5 mg L^-1) medium. The developed catalyst can destruct CY molecules with a maximum rate of 23.1 µg CY g^-1 min^-1 and the photodegradation kinetics follows first-order kinetics below 23.5 mg L^-1, a fractional order between 23.5 and 35.0 mg L^-1, and a zeroth order above 35.0 mg L^-1 of CY concentration. Finding from scavenging effect implies that [Formula: see text] and [Formula: see text] radicals have significant influence on the degradation. A suitable mechanism has been proposed with excellent stability and verified reusability of the proposed photocatalyst.

In Situ Modification of Multi-Walled Carbon Nanotubes with Polythiophene-Based Conjugated Polymer for Information Storage

One-dimensional multi-walled carbon nanotubes (MWNTs) have unique electrical properties, but they are not solution-processable, which severely limits their applications in microelectronic devices. Therefore, it is of great significance to improve the solubility of MWNTs and endow them with new functions by chemical modification. In this work, MWNTs were in situ functionalized with poly[(1,4-diethynyl-benzene)-alt-(3-hexylthiophene)] (PDHT) via Sonogashira-Hagihara polymerization. The obtained material PDHT-g-MWNTs was soluble in conventional organic solvents. By sandwiching a PDHT-g-MWNTs film between Al and ITO electrodes, the fabricated Al/PDHT-g-MWNTs/ITO electronic device exhibited nonvolatile rewritable memory behavior, with highly symmetrical turn-on/off voltages, a retention time of over 10⁴ s, and durability for 200 switching cycles. These findings provide important insights into the development of carbon nanotube-based materials for information storage.

Combined effect of single-walled carbon nanotubes and cadmium on human lung cancer cells

Co-exposure of widely used single-walled carbon nanotubes (SWCNTs) and ubiquitous cadmium (Cd) to humans through ambient air is unavoidable. Studies on joint toxicity of SWCNTs and Cd in human cells are scarce. We aimed to investigate the joint effects of SWCNTs and Cd in human lung epithelial (A549) cells. Results showed that SWCNTs were safe while Cd induce significant toxicity to A549 cells. Remarkably, Cd-induced cell viability reduction, lactate dehydrogenase leakage, cell cycle arrest, dysregulation of apoptotic gene (p53, bax, bcl-2, casp3, and casp9), and mitochondrial membrane potential depletion were significantly mitigated following SWCNTs co-exposure. Cd-induced intracellular level of reactive oxygen species, hydrogen peroxide, and lipid peroxidation were significantly attenuated by SWCNT co-exposure. Moreover, glutathione depletion and lower activity of antioxidant enzymes after Cd exposure were also effectively abrogated by co-exposure of SWCNTs. Inductively coupled plasma-mass spectrometry study indicated that higher adsorption of Cd on SCWNTs might decreased cellular uptake and the toxic potential of Cd in A549 cells. Our work warranted further research to explore the potential mechanism of joint effects of SWCNTs and Cd at in vivo levels.

Interactions between multi-walled carbon nanotubes and plankton as detected by Raman spectroscopy

Raman spectroscopy has been commonly used in materials science to detect chemicals. Based on inelastic scattering of light after incident photons interact with a molecule, it has high potential for non-destructive detection of specific contaminants in living biological specimens. The increasing use of carbon nanotubes (CNTs) increases its chance to enter the aquatic habitats through direct discharge, surface runoff and atmospheric deposition, but their potential environmental impacts remain poorly known. We tested the use of Raman spectroscopy to investigate the interactions between multi-walled CNTs (MWCNTs) and aquatic plankton in vivo. For phytoplankton cells (Scenedesmus obliquus) that were exposed to MWCNTs, Raman spectroscopy was able to distinguish between background biological material and MWCNTs that adhere to the cells (G-band peak at 1590 cm^-1 and D-band peak at 1350 cm^-1 in the Raman spectra that were unique to MWCNTs). Harmful effects of MWCNT exposure manifested as lower photosynthetic efficiency and/or lower specific growth rate in the phytoplankton. MWCNT particles also adhered to the body surface of zooplankton, especially the carapace. Both Ceriodaphnia sp. and Daphnia sp. ingested MWCNTs directly, which was verified by the signature G-band and D-band Raman peaks in the zooplankton gut region. MWCNTs remained in the gut overnight after the zooplankton had been returned to clean water, showing that the zooplankton retained MWCNTs inside their body for an extended time, thereby increasing the chance to disperse and transfer the contaminants throughout the aquatic food web. Our results demonstrate that Raman spectroscopy is a promising method for non-destructive investigation of the uptake and dynamic fate of CNTs and other contaminants in aquatic organisms.

A Comprehensive Study of Pristine and Calcined f-MWCNTs Functionalized by Nitrogen-Containing Functional Groups

We present the study of pristine and calcined f-MWCNTs functionalized by nitrogen-containing functional groups. We focus on the structural and microstructural modification tuned by the previous annealing. However, our primary goal was to analyze the electronic structure and magnetic properties in relation to the structural properties using a multi-technique approach. The studies carried out by X-ray diffraction, XPS, and ⁵⁷Fe Mössbauer spectrometry revealed the presence of γ-Fe nanoparticles, Fe₃C, and α-FeOOH as catalyst residues. XPS analysis based on the deconvolution of core level lines confirmed the presence of various nitrogen-based functional groups due to the purification and functionalization process of the nanotubes. The annealing procedure leads to a structural modification mainly associated with removing surface impurities as purification residues. Magnetic studies confirmed a significant contribution of Fe₃C as evidenced by a Curie temperature estimated at T_C = 452 ± 15 K. A slight change in magnetic properties upon annealing was revealed. The detailed studies performed on nanotubes are extremely important for the further synthesis of composite materials based on f-MWCNTs.

The unpredictable carbon nanotube biocorona and a functionalization method to prevent protein biofouling

Background

The intrinsic physicochemical properties of carbon nanotubes (CNTs) make them unique tools in nanotechnology. Their elemental composition, resilience, thermal properties, and surface reactivity make CNTs also of undisputed interest in biotechnology. In particular, their extraordinary ability to capture biomolecules on their surface makes them essential in this field. The proteins adsorbed on the CNTs create a biological coating that endows them the ability to interact with some cell receptors, penetrate membranes or interfere with cell biomechanics, thus behaving as an active bio-camouflage. But some of these proteins unfold, triggering an immune response that unpredictably changes the biological activity of CNTs. For this reason, the control of the biocorona is fundamental in the nanobiotechnology of CNTs.

Results

Using TEM and AFM here we demonstrate a significant increase in CNTs diameter after protein functionalization. A quantitative analysis using TGA revealed that between 20 and 60% of the mass of functionalized nanotubes corresponds to protein, with single-walled CNTs capturing the highest amounts. To qualitatively/quantitatively characterize these biocoatings, we studied the biochemical "landscape" of the proteins captured by the different nanotubes after functionalization under various conditions. This study revealed a significant variability of the proteins in the corona as a function of the type of nanotube, the functionalization temperature, or the time after exposure to serum. Remarkably, the functionalization of a single type of CNT with sera from various human donors also resulted in different protein landscapes. Given the unpredictable assortment of proteins captured by the corona and the biological implications of this biocoating, we finally designed a method to genetically engineer and produce proteins to functionalize nanotubes in a controlled and customizable way.

Conclusions

We demonstrate the high unpredictability of the spontaneous protein corona on CNTs and propose a versatile functionalization technique that prevents the binding of nonspecific proteins to the nanotube to improve the use of CNTs in biomedical applications.

Supplementary Information

The online version contains supplementary material available at 10.1186/s12951-021-00872-x.

Efficacy of multi-walled carbon nanotubes in regulating growth performance, total glutathione and redox state of Calendula officinalis L. cultivated on Pb and Cd polluted soil

Multi-walled carbon nanotubes (MWCNTs) have recently attracted huge attention to their impacts on the environment and plants. Therefore, this experiment was conducted to investigate the responses of lead (Pb) and cadmium (Cd) exposed pot marigold plants to various levels of MWCNT. Calendula officinalis (L.) seedlings were cultivated in Pb and Cd-polluted soils with exposure to 0, 50, 100, 250, 500 and 1000 mg L^-1 of MWCNT. The results demonstrated that foliar-applied MWCNT up to 250 mg L^-1 not only alleviated Pb and Cd-induced toxicity by reducing oxidative damage and boosting both enzymatic and non-enzymatic antioxidant defense system but also promoted the phytoremediation property of pot marigold plants by enhancing the accumulation of both Pb and Cd from the soil. Interestingly, oxidative damage exacerbation and both Pb and Cd accumulation reduction were noticed in pot marigold seedlings exposed to 500 and 1000 mg L^-1 MWCNTs. The findings of this study clearly showed that the use of appropriate concentrations of MWCNTs in increasing the phytoremediation properties of pot marigold was justified, while the use of high concentrations is toxic to the plant and intensifies the toxic effects of heavy metals (HMs) on plant physiology. This study provides a novel method to facilitate the phytoremediation of HMs polluted soils using MWCNT as well as explores the potential risks of these nanoparticles to the plants.

Efficient lead preconcentration using two chemically functionalized carbon nanotubes in hyphenated flow injection-flame atomic absorption spectrometry system

Lead contamination in drinking and natural water has reached alarming concentrations, thus necessitating the development of accurate and rapid determination systems for Pb(II) in aqueous systems. Two hyphenated flow injection-solid phase extraction- FAAS (FI-SPE-FAAS) systems using oxidized and m-phenylenediamine functionalized multiwalled carbon nanotubes for Pb(II) preconcentration from industrially contaminated real water samples have been proposed. The chemical and hydrodynamic parameters affecting Pb(II) sorption/desorption were optimized. The effect of common interfering ions in water was also studied. Different figures of merit such as preconcentration factor (> 70), detection limit (≤ 1.5 µg L^-1), and relative standard deviation (≤ 1.3%) were achieved at the preconcentration time of 120 s for both the preconcentration systems. The method was applied to industrially contaminated real water samples and the spike recovery tests were carried out using standard Pb(II) solution traceable to NIST. The proposed method was validated using standard reference material 1640a supplied by NIST Gaithersburg, MD, USA.

Nanotheranostic Carbon Dots as an Emerging Platform for Cancer Therapy

Cancer remains one of the most deadly diseases globally, but carbon-based nanomaterials have the potential to revolutionize cancer diagnosis and therapy. Advances in nanotechnology and a better understanding of tumor microenvironments have contributed to novel nanotargeting routes that may bring new hope to cancer patients. Several low-dimensional carbon-based nanomaterials have shown promising preclinical results; as such, low-dimensional carbon dots (CDs) and their derivatives are considered up-and-coming candidates for cancer treatment. The unique properties of carbon-based nanomaterials are high surface area to volume ratio, chemical inertness, biocompatibility, and low cytotoxicity. It makes them well suited for delivering chemotherapeutics in cancer treatment and diagnosis. Recent studies have shown that the CDs are potential applicants in biomedical sciences, both as nanocarriers and nanotransducers. This review covers the most commonly used CD nanoparticles in nanomedicines intended for the early diagnosis and therapy of cancer.

Single-Walled Carbon Nanotubes Attenuate Cytotoxic and Oxidative Stress Response of Pb in Human Lung Epithelial (A549) Cells

Combined exposure of single-walled carbon nanotubes (SWCNTs) and trace metal lead (Pb) in ambient air is unavoidable. Most of the previous studies on the toxicity of SWCNTs and Pb have been conducted individually. There is a scarcity of information on the combined toxicity of SWCNTs and Pb in human cells. This work was designed to explore the combined effects of SWCNTs and Pb in human lung epithelial (A549) cells. SWCNTs were prepared through the plasma-enhanced vapor deposition technique. Prepared SWCNTs were characterized by x-ray diffraction, x-ray photoelectron spectroscopy, scanning electron microscopy, and dynamic light scattering. We observed that SWCNTs up to a concentration of 100 µg/mL was safe, while Pb induced dose-dependent (5-100 µg/mL) cytotoxicity in A549 cells. Importantly, cytotoxicity, cell cycle arrest, mitochondrial membrane potential depletion, lipid peroxidation, and induction of caspase-3 and -9 enzymes following Pb exposure (50 µg/mL for 24 h) were efficiently attenuated by the co-exposure of SWCNTs (10 µg/mL for 24 h). Furthermore, generation of Pb-induced pro-oxidants (reactive oxygen species and hydrogen peroxide) and the reduction of antioxidants (antioxidant enzymes and glutathione) were also mitigated by the co-exposure of SWCNTs. Inductively coupled plasma-mass spectrometry results suggest that the adsorption of Pb on the surface of SWCNTs could attenuate the bioavailability and toxicity of Pb in A549 cells. Our data warrant further research on the combined effects of SWCNTs and Pb in animal models.

Developments in the Application of Nanomaterials for Water Treatment and Their Impact on the Environment

Nanotechnology is an uppermost priority area of research in several nations presently because of its enormous capability and financial impact. One of the most promising environmental utilizations of nanotechnology has been in water treatment and remediation where various nanomaterials can purify water by means of several mechanisms inclusive of the adsorption of dyes, heavy metals, and other pollutants, inactivation and removal of pathogens, and conversion of harmful materials into less harmful compounds. To achieve this, nanomaterials have been generated in several shapes, integrated to form different composites and functionalized with active components. Additionally, the nanomaterials have been added to membranes that can assist to improve the water treatment efficiency. In this paper, we have discussed the advantages of nanomaterials in applications such as adsorbents (removal of dyes, heavy metals, pharmaceuticals, and organic contaminants from water), membrane materials, catalytic utilization, and microbial decontamination. We discuss the different carbon-based nanomaterials (carbon nanotubes, graphene, graphene oxide, fullerenes, etc.), and metal and metal-oxide based nanomaterials (zinc-oxide, titanium dioxide, nano zerovalent iron, etc.) for the water treatment application. It can be noted that the nanomaterials have the ability for improving the environmental remediation system. The examination of different studies confirmed that out of the various nanomaterials, graphene and its derivatives (e.g., reduced graphene oxide, graphene oxide, graphene-based metals, and graphene-based metal oxides) with huge surface area and increased purity, outstanding environmental compatibility and selectivity, display high absorption capability as they trap electrons, avoiding their recombination. Additionally, we discussed the negative impacts of nanomaterials such as membrane damage and cell damage to the living beings in the aqueous environment. Acknowledgment of the possible benefits and inadvertent hazards of nanomaterials to the environment is important for pursuing their future advancement.

Carbon Nanotubes Modulate Activity of Cytotoxic Compounds via a Trojan Horse Mechanism

Carbon nanotubes (CNTs) are an emerging drug delivery system, but their success is thwarted by potential toxicity concerns. In vitro and in vivo studies imply toxic potential of CNTs, but their potential to influence toxicity of coadministered compounds still remains elusive. Therefore, the present study was conducted to determine the effect of multiwalled CNTs (MWCNTs) on the toxicity of cytotoxic compounds in macrophage (RAW 264.7), lung epithelial (A549), and breast cancer (MCF-7) cell lines. The results suggest that hydrophilicity/lipophilicity of the compounds is a critical parameter. The correlation between log P and enhanced cytotoxic activity followed an inverted U-shaped curve and log P close to 1 exhibited the highest increase in cytotoxicity. Further, the increase in cytotoxicity of drug/MWCNT combinations was proportional to the degree of cellular uptake of MWCNTs. A mathematical model was developed and validated with a test set of compounds. These results suggest that MWCNTs act as a "Trojan horse" for increased intracellular delivery of drugs resulting in enhanced cytotoxic activity.

State-of-Art Bio-Assay Systems and Electrochemical Approaches for Nanotoxicity Assessment

Innovations in the field of nanotechnology, material science and engineering has rendered fruitful utilities in energy, environment and healthcare. Particularly, emergence of surface engineered nanomaterials offered novel varieties in the daily consumables and healthcare products including therapeutics and diagnostics. However, the nanotoxicity and bioactivity of the nanomaterials upon interaction with biological system has raised critical concerns to individual as well as to the environment. Several biological models including plant and animal sources have been identified to study the toxicity of novel nanomaterials, correlating the physio-chemical properties. Biological interaction of nanomaterials and its mediated physiological functions are studied using conventional cell/molecular biological assays to understand the expression levels of genetic information specific to intra/extra cellular enzymes, cell viability, proliferation and function. However, modern research still demands advanced bioassay methods to screen the acute and chronic effects of nanomaterials at the real-time. In this regard, bioelectrochemical techniques, with the recent advancements in the microelectronics, proved to be capable of providing non-invasive measurement of the nanotoxicity effects (in vivo and in vitro) both at single cellular and multicellular levels. This review attempted to provide a detailed information on the recent advancements made in development of bioassay models and systems for assessing the nanotoxicology. With a short background information on engineered nanomaterials and physiochemical properties specific to consumer application, present review highlights the multiple bioassay models evolved for toxicological studies. Emphasize on multiple mechanisms involved in the cell toxicity and electrochemical probing of the biological interactions, revealing the cytotoxicity were also provided. Limitations in the existing electrochemical techniques and opportunities for the future research focusing the advancement in single molecular and whole cell bioassay has been discussed.

Genes expression profiling of alveolar macrophages exposed to non-functionalized, anionic and cationic multi-walled carbon nanotubes shows three different mechanisms of toxicity

Functionalized multi-walled carbon nanotubes (MWCNT) have become the focus of increased research interest, particularly in their application as tools in different areas, such as the biomedical field. Despite the benefits associated with functionalization of MWCNT, particularly in overcoming issues relating to solubility, several studies have demonstrated that these functionalized nanoparticles display different toxicity profiles. For this study, we aim to compare NR8383 cells responses to three well-characterized MWCNT with varying functional groups. This study employed cytotoxicity assays, transcriptomics and proteomics to assess their toxicity using NR8383 rat alveolar macrophages as an in vitro model. The study findings indicated that all MWCNT altered ribosomal protein translation, cytoskeleton arrangement and induced pro-inflammatory response. Only functionalized MWCNT alter mTOR signaling pathway in conjunction with increased Lamtor gene expression. Furthermore, the type of functionalization was also important, with cationic MWCNT activating the transcription factor EB and inducing autophagy while the anionic MWCNT altering eukaryotic translation initiation factor 4 (EIF4) and phosphoprotein 70 ribosomal protein S6 kinase (p70S6K) signaling pathway as well as upregulation Tlr2 gene expression. This study proposes that MWCNT toxicity mechanisms are functionalization dependent and provides evidence that inflammatory response is a key event of carbon nanotubes toxicity.

The Structure and Chemical Composition of the Cr and Fe Pyrolytic Coatings on the MWCNTs' Surface According to NEXAFS and XPS Spectroscopy

The paper is devoted to the structure and properties of the composite material based on multi-walled carbon nanotubes (MWCNTs) covered with pyrolytic iron and chromium. Fe/MWCNTs and Cr/MWCNTs nanocomposites have been prepared by the metal organic chemical vapor deposition (MOCVD) growth technique using iron pentacarbonyl and bis(arene)chromium compounds, respectively. Composites structures and morphologies preliminary study were performed using X-ray diffraction, scanning and transmission electron microscopy and Raman scattering. The atomic and chemical composition of the MWCNTs' surface, Fe-coating and Cr-coating and interface-(MWCNTs surface)/(metal coating) were studied by total electron yield method in the region of near-edge X-ray absorption fine structure (NEXAFS) C1s, Fe2p and Cr2p absorption edges using synchrotron radiation of the Russian-German dipole beamline (RGBL) at BESSY-II and the X-ray photoelectron spectroscopy (XPS) method using the ESCALAB 250 Xi spectrometer and charge compensation system. The absorption cross sections in the NEXAFS C1s edge of the nanocomposites and MWCNTs were measured using the developed approach of suppressing and estimating the contributions of the non-monochromatic background and multiple reflection orders radiation from the diffraction grating. The efficiency of the method was demonstrated by the example of the Cr/MWCNT nanocomposite, since its Cr2p NEXAFS spectra contain additional C1s NEXAFS in the second diffraction order. The study has shown that the MWCNTs' top layers in composite have no significant destruction; the MWCNTs' metal coatings are continuous and consist of Fe3O4 and Cr2O3. It is shown that the interface between the MWCNTs and pyrolytic Fe and Cr coatings has a multilayer structure: a layer in which carbon atoms along with epoxy -C-O-C- bonds form bonds with oxygen and metal atoms from the coating layer is formed on the outer surface of the MWCNT, a monolayer of metal carbide above it and an oxide layer on top. The iron oxide and chromium oxide adhesion is provided by single, double and epoxy chemical binding formation between carbon atoms of the MWCNT top layer and the oxygen atoms of the coating, as well as the formation of bonds with metal atoms.

Radiolabeling of amide functionalized multi-walled carbon nanotubes for bioaccumulation study in fish bone using whole-body autoradiography

Commercial and medicinal applications of functionalized carbon nanotubes (f-CNTs) such as amidated f-CNTs are expanding rapidly with a potential risk exposure to living organisms. The effects of amidated f-CNTs on aquatic species have received a limited attention. In this work, an easy wet method to prepare [¹⁴C]-label amide multi-walled carbon nanotubes (MWNTs) is reported. Labeled carbon nanotubes were prepared by successive reactions of carboxylation, chloroacylation, and final amidation using [¹⁴C]-labeled ethanolamine. The f-CNTs were characterized using elemental analysis, electron dispersive X-ray, transmission electron microscopy, thermogravimetric analysis, and Raman and FTIR spectroscopy. An uptake experiment was carried out with juvenile Arctic char (Salvelinus alpinus) using water dispersed amidated [¹⁴C]-f-CNTs to assess their biodistribution in fish tissues using whole body autoradiography. The radioactivity pattern observed in fish head suggests that f-CNTs were accumulated in head bone canals, possibly involving an interaction with mineral or organic phases of bones such as calcium and collagen. This f-CNTs distribution illustrates how important is to consider the surface charges of functionalized carbon nanotubes in ecotoxicological studies.

Advances in the application, toxicity and degradation of carbon nanomaterials in environment: A review

Carbon nanomaterials (CNMs) are novel nanomaterials with excellent physicochemical properties, which are widely used in biomedicine, energy and sensing. Besides, CNMs also play an important role in environmental pollution control, which can absorb heavy metals, antibiotics and harmful gases. However, CNMs are inevitably entering the environment while they are rapidly developing. They are harmful to living organisms in the environment and are difficult to degrade under natural conditions. Here, we systematically describe the toxicity of carbon nanotubes (CNTs), graphene (GRA) and C₆₀ to cells, animals, humans, and microorganisms. According to the current research results, the toxicity mechanism is summarized, including oxidative stress response, mechanical damage and effects on biological enzymes. In addition, according to the latest research progress, we focus on the two major degradation methods of chemical degradation and biodegradation of CNTs, GRA and C₆₀. Meanwhile, the reaction conditions and degradation mechanisms of degradation are respectively stated. Moreover, we have prospects for the limitations of CNM degradation under non-experimental conditions and their potential application.

A novel nanocomposite of aminated silica nanotube (MWCNT/Si/NH2) and its potential on adsorption of nitrite

Several parts of the world have been facing the problem of nitrite and nitrate contamination in ground and surface water. The acute toxicity of nitrite has been shown to be 10-fold higher than that of nitrate. In the present study, aminated silica carbon nanotube (ASCNT) was synthesised and tested for nitrite removal. The synergistic effects rendered by both amine and silica in ASCNT have significantly improved the nitrite removal efficiency. The IEP increased from 2.91 for pristine carbon nanotube (CNT) to 8.15 for ASCNT, and the surface area also increased from 178.86 to 548.21 m² g^-1. These properties have promoted ASCNT a novel adsorbent to remove nitrite. At optimum conditions of 700 ppm of nitrite concentration at pH 7 and 5 h of contact with 15 mg of adsorbent, the ASCNT achieved the maximal loading capacity of 396 mg/g (85% nitrite removal). The removal data of nitrite onto ASCNT fitted the Langmuir isotherm model better than the Freundlich isotherm model with the highest regression value of 0.98415, and also, the nonlinear analysis of kinetics data showed that the removal of nitrite followed pseudo-second-order kinetic. The positive values of both ΔS° and ΔH° suggested an endothermic reaction and an increase in randomness at the solid-liquid interface. The negative ΔG° values indicated a spontaneous adsorption process. The ASCNT was characterised using FESEM-EDX and FTIR, and the results obtained confirmed the removal of nitrite. Based on the findings, ASCNT can be considered as a novel and promising candidate for the removal of nitrite ions from wastewater.

Long term effects of Pb2+ on the membrane fouling in a hydrolytic-anoxic-oxic-membrane bioreactor treating synthetic electroplating wastewater

Long-term effects of Pb²⁺ on the operating performance and membrane fouling of two hydrolytic-anoxic-oxic-membrane bioreactors treating synthetic electroplating wastewater were investigated. The COD, NH₄⁺-N and TN removal efficiencies decreased by 5.5%, 10.4% and 7.9% with long-term exposure of 2 mg L^-1 Pb²⁺, while serious decreases achieved 25.4%, 35.0% and 26.2% with 6 mg L^-1 Pb²⁺ exposure, respectively. 2 mg L^-1 Pb²⁺ mitigated the cake layer fouling rate by 25.4% but increased the pore blocking rate by 69.1%, which was contributed by the increase of low and moderate molecular weight (MW) components in the soluble and colloidal foulants (SCFs). 6 mg L^-1 Pb²⁺ accelerated the cake layer fouling rate by 101.1%, but mitigated the pore blocking rate by 6.4% due to the increase of high MW SCFs (especially polysaccharides). Thermodynamic analyses showed that Pb²⁺ regulated the concentration and protein/polysaccharide ratio of loosely bound extracellular polymeric substances, thus changing the flocs hydrophobicity and aggregation capacity, leading the cake layer fouling rate variation.

A holistic study on potential toxic effects of carboxylated multi-walled carbon nanotubes (MWCNTs-COOH) on zebrafish (Danio rerio) embryos/larvae

Multi-walled carbon nanotubes (MWCNTs) have widespread use in industrial and consumer products and great potential in biomedical applications. This leads to inevitably their release into the environment and the formation of their toxic effects on organisms. These effects can change depending on their physicochemical characteristics. Therefore, the toxicological findings of MWCNTs are inconsistent. Their toxicities related to surface modification have not been elucidated in a holistic manner. Hence, this study was conducted to clarify their potential toxic effects on zebrafish embryos/larvae in a comprehensive approach using morphologic, biochemical and molecular parameters. Zebrafish embryos were exposed to 5, 10, 20 mg/L doses of MWCNTs-COOH at 4 h after fertilization and grown until 96 hpf. Physiological findings demonstrated that they induced a concentration-dependent increase in the mortality rate, delayed hatching and decrease in the heartbeat rate. Moreover, it caused abnormalities including yolk sac edema, pericardial edema, head, tail malformations, and vertebral deformities. These effects may be due to the alterations in antioxidant and immune system related gene expressions after their entry into zebrafish embryo/larvae. The entry was confirmed from the evaluation of Raman spectra collected from the head, yolk sac, and tail of control and the nanotube treated groups. The gene expression analysis indicated the changes in the expression of oxidative stress (mtf-1, hsp70, and nfkb) and innate immune system (il-1β, tlr-4, tlr-22, trf, and cebp) related genes, especially an increased in the expression of the hsp70 and il-1β. These findings proved the developmental toxicities of MWCNTs-COOH on the zebrafish embryos/larvae.

Individual and combined toxicity of carboxylic acid functionalized multi-walled carbon nanotubes and benzo a pyrene in lung adenocarcinoma cells

Co-exposure to carboxylic acid functionalized multi-walled carbon nanotubes (F-MWCNTs) and polycyclic aromatic hydrocarbons (PAHs) such as benzo a pyrene (BaP) in ambient air have been reported. Adsorption of BaP to F-MWCNTs can influence combined toxicity. Studying individual toxicity of F-MWCNTs and BaP might give unrealistic data. Limited information is available on the combined toxicity of F-MWCNTs and BaP in human cells. The objective of the present work is to evaluate the toxicity of F-MWCNTs and BaP individually and combined in human lung adenocarcinoma (A549 cells). The in vitro toxicity is evaluated through cell viability, the production of reactive oxygen species (ROS), apoptosis, and the production of 8-OHdG assays. Adsorption of BaP to F-MWCNTs was confirmed using a spectrophotometer. The results indicated that the F-MWCNTs and BaP reduce cell viability individually and produce ROS, apoptosis, and 8-OHdG in exposed cells. Stress oxidative is found to be a mechanism of cytotoxicity for both F-MWCNTs and BaP. Combined exposure to F-MWCNTs and BaP decreases cytotoxicity compared to individual exposure, but the difference is not statistically significant in all toxicity assays; hence, the two-factorial analysis indicated an additive toxic interaction. Adsorption of BaP to F-MWCNTs could mitigate the bioavailability and toxicity of BaP in biological systems. Considering the mixture toxicity of MWCNTs and BaP is required for risk assessment of ambient air contaminants.