Engineering electrospun multicomponent polyurethane scaffolding platform comprising grapeseed oil and honey/propolis for bone tissue regeneration

The effect of green synthesis of TiO2 nanoparticles/collagen/HA scaffold in bone regeneration: As an animal study

BACKGROUND

The bone defects cannot heal by themselves when their range exceeds the critical size defect (CSD). In clinical treatment, significant bone defects are often caused by trauma, developmental deformity, tumour resection and infection.

OBJECTIVES

The purpose of this study was to investigate the effect of green synthesis of TiO2 from propolis extract/collagen/HA (Hydroxyapatite) scaffolds on bone regeneration in rats.

METHODS

Water uptake, biodegradability, porosity and biodegradation of the scaffolds were evaluated after they were synthesised using freeze-dry method. Cell viability by MTT assay was then evaluated. During the 4, 8 and 12 weeks following the scaffold implantation, the bone regeneration was evaluated using macroscopic and microscopic tests to determine the effectiveness of green synthesis of TiO2 from propolis extract/collagen/HA scaffolds.

RESULTS

Compared to the HA/Coll scaffold, ProTiO2 /HA/Coll scaffold was reduced porosity, water absorption and degradability porosity. Based on in vitro tests, both synthetic scaffolds induced cell growth and were less toxic and stimulated cell growth. Based on histopathological testing, the ProTiO2 /HA/Coll scaffolds formed high levels of bone during 12 weeks in comparison with HA/Coll and control group.

CONCLUSIONS

ProTiO2 /HA/Coll composite can be used in regenerative medicine, bone fillers and scaffolds. As a result, this research suggests that ProTiO2 /HA/Coll composites could be promising candidates for bone regeneration.

Nanomaterials Based on Honey and Propolis for Wound Healing-A Mini-Review

Wound healing is a public health concern worldwide, particularly in chronic wounds due to delayed healing and susceptibility to bacterial infection. Nanomaterials are widely used in wound healing treatments due to their unique properties associated with their size and very large surface-area-to-volume ratio compared to the same material in bulk. The properties of nanomaterials can be expanded and improved upon with the addition of honey and propolis, due to the presence of bioactive molecules such as polyphenols, flavonoids, peptides, and enzymes. These bionanomaterials can act at different stages of wound healing and through different mechanisms, including anti-inflammatory, antimicrobial, antioxidant, collagen synthesis stimulation, cell proliferation, and angiogenic effects. Biomaterials, at the nanoscale, show new alternatives for wound therapy, allowing for targeted and continuous delivery of beekeeping products at the injection site, thus avoiding possible systemic adverse effects. Here, we summarize the most recent therapies for wound healing based on bionanomaterials assisted by honey and propolis, with a focus on in vitro and in vivo studies. We highlight the type, composition (honey, propolis, and polymeric scaffolds), biological, physicochemical/mechanical properties, potential applications and patents related of the last eight years. Furthermore, we discuss the challenges, advantages, disadvantages and stability of different bionanomaterials related to their clinical translation and insight into the investigation and development of new treatments for wound healing.

Development and Characterizations of Engineered Electrospun Bio-Based Polyurethane Containing Essential Oils

We report the fabrication of bio-based thermoplastic polyurethane (TPU) fibrous scaffolds containing essential oils (EO). The main goal of this study was to investigate the effects of essential oil type (St. John’s Wort oil (SJWO), lavender oil (LO), and virgin olive oil (OO))/concentration on the electrospinnability of TPU. The effects of applied voltage, flow rate, and end-tip distance on the diameter, morphology, and wettability of the TPU/EO electrospun fibers were investigated. The electrospun TPU/EO scaffolds were characterized by scanning electron microscopy (SEM), atomic force microscopy (AFM), contact angle (CA), and Fourier transform infrared spectroscopy (FTIR). The addition of oil resulted in an increase in the fiber diameter, reduction in the surface roughness, and, accordingly, a reduction in the contact angle of the composite fibers. TPU fibers containing SJWO and LO have a more flexible structure compared to the fibers containing OO. This comparative study fills the existing information gap and shows the benefits of the fabrication of essential-oil-incorporated electrospun fiber with morphology and size range with respect to the desired applications, which are mostly wound dressing and food packaging.

Formulation and organoleptic evaluation of Poly Herbal Cream of Punica, Neem, Carrot & Jamun as Active Ingredients

Assuming that herbal preparation is better with fewer side effects than synthetics, natural treatments are more effective than allopathy in terms of side effects for better human body healing. Herbal products have a growing demand in the world market, and the plants have been reported in the literature as having various pharmacological activities such as anti-microbial, anti-oxidant, anti-inflammatory activity, anti-cancer, anti-diabetic. The purpose of this study was to develop anti-aging poly-herbal cream by mixing the extract of Punica leaf, Neem Oil, Jamun powder, Carrot powder as the main ingredient, and then creams were developed based on the anti-oxidant ability of herbal extracts and performed their evaluation study. Punica granatam leaves were shade dried and extracted using the Soxhlet method with different solvents such as n-hexane, benzene, and alcohol. Fine extract powder was collected and removed distilled water thoroughly. The cream was formulated into different concentrations, namely F1, F2, F3, and F4. Similar types of research with similar components have been reported, but in this experiment, the formulation is different, and this work is kept cost-efficient and straightforward; it's an attempt to reduce few components and prepare cream and evaluate its potential. According to The International Council for Harmonization of Technical Requirements for Pharmaceuticals for Human Use ICH guidelines, the cream was stable during stability studies, and F3 turned out to be a better formulation than the other three.

Propolis loaded and genipin-crosslinked PVA/chitosan membranes; characterization properties and cytocompatibility/genotoxicity response for wound dressing applications

Loading propolis by a simple process using genipin as a crosslinking agent and fabrication of a novel PVA/Chitosan-Propolis membrane scaffolds were reported for wound dressing applications. The research is focused on the effects of propolis on characterization properties of membrane such as chemical structure, surface morphology, degradation ratio, crystallinity, hydrophilicity, water uptake capacity, water vapour transmission rate and mechanical aspect. It was noticed that water uptake capacity and hydrophilicity properties of membrane considerably affected by the propolis. By addition of (0.50, % v/v) propolis, the contact angle of the PVA/Chitosan membrane was remarkably decreased from 86.29° ± 3 to 45 ± 2°. 3-(4,5-dimethylthiazoyl-2-yl)-2,5-diphenylte-trazolium (MTT) bromide test and SEM were used to analyse the cytocompatibility of the membranes and morphology of cells on membrane. The propolis incorporated membrane showed cell proliferation rate 176 ± 13%, 775 ± 1%, and 853 ± 23%, at 24 h, 27 h and 120 h, respectively. SEM images also supported the cell behaviour on membrane. DNA fragmentation was also investigated with genotoxicity test. The studies on the interactions between membranes and MEF cells revealed that the incorporation of propolis into membrane promoted cell proliferation. These overall results presented that propolis incorporated membranes could have potentially appealing application as scaffolds for wound healing applications.

Essential Oils for Bone Repair and Regeneration-Mechanisms and Applications

Although bone possesses a remarkable capacity for self-remodeling and self-healing of small defects, the continuously increasing growth of bone diseases in the elderly population is becoming a significant burden, affecting individual life quality and society. Conventional treatment options involve surgical procedures for repair and reconstruction, local debridement, autografts or allografts, bone transport, Masquelet's two-stage reconstructions, and vascularized bone transplants. However, as such approaches often lead to disruptions of bone-regeneration processes and microbial contaminations and are often inefficient, researchers focus on developing bone-regenerative strategies and identifying novel therapeutic agents that could aid the bone-healing process. In this regard, plant-derived biocompounds, especially essential oils (EOs), have received great scientific attention in recent years, owing to their antioxidant, anti-inflammatory, and antimicrobial effects. Current studies focus on either the direct application of EOs on bone tissue or the introduction of EOs as bioactive compounds in bone scaffolds or as coatings for bone implants. Some of the EOs investigated involve St. John's wort, rosemary, thyme, ylang, white poplar, eucalyptus, lavender, and grape seed. In this context, the present paper aims to provide an overview of the main mechanisms involved in bone repair and regeneration and the potential of EOs to address and enhance these mechanisms.

Processing of Polyester-Urethane Filament and Characterization of FFF 3D Printed Elastic Porous Structures with Potential in Cancellous Bone Tissue Engineering

This paper addresses the potential of self-made polyester-urethane filament as a candidate for Fused Filament Fabrication (FFF)-based 3D printing (3DP) in medical applications. Since the industry does not provide many ready-made solutions of medical-grade polyurethane filaments, we undertook research aimed at presenting the process of thermoplastic polyurethane (TPU) filament formation, detailed characteristics, and 3DP of specially designed elastic porous structures as candidates in cancellous tissue engineering. Additionally, we examined whether 3D printing affects the structure and thermal stability of the filament. According to the obtained results, the processing parameters leading to the formation of high-quality TPU filament (TPU_F) were captured. The results showed that TPU_F remains stable under the FFF 3DP conditions. The series of in vitro studies involving long- and short-term degradation (0.1 M phosphate-buffered saline (PBS); 5 M sodium hydroxide (NaOH)), cytotoxicity (ISO 10993:5) and bioactivity (simulated body fluid (SBF) incubation), showed that TPU printouts possessing degradability of long-term degradable tissue constructs, are biocompatible and susceptible to mineralization in terms of hydroxyapatite (HAp) formation during SBF exposure. The formation of HAp on the surface of the specially designed porous tissue structures (PTS) was confirmed by scanning electron microscope (SEM) and energy-dispersive X-ray spectroscopy (EDS) studies. The compression test of PTS showed that the samples were strengthened due to SBF exposure and deposited HAp on their surface. Moreover, the determined values of the tensile strength (~30 MPa), Young’s modulus (~0.2 GPa), and compression strength (~1.1 MPa) allowed pre-consideration of TPU_F for FFF 3DP of cancellous bone tissue structures.

Characterization of polyamide-6/ propolis blended electrospun fibers

Polyamide-6 (PA-6) nanofibers and PA-6/propolis ethanolic extract (EEP) blended fibers were prepared having electrospun their solutions in formic acid as solvent. The effect of concentrations of PA-6 and also EEP in polymer solutions on the morphology and physicochemical characteristics of their electrospun fibers was investigated. The analysis of FESEM images showed the mean diameter of fibers increased from 487- 682 nm with increasing PA-6 concentration in the range of 25-40 % w/v. While, increasing EEP concentration (20-50% (w/w)) in PA-6/EEP system caused the increasing fiber mean diameters from 943- 1773 nm. Partially high aspect ratio nanofibers were observed only in the PA-6 systems. Antioxidant activity of the fibers enhanced with increasing EEP concentration in the fiber mats. FTIR spectrums and thermal properties of electrospun fibers exhibited the simple mixtures of PA-6 and EEP in blend fibers which did not contain very complex interactions.

Recent advances in tissue engineering scaffolds based on polyurethane and modified polyurethane

Organ repair, regeneration, and transplantation are constantly in demand due to various acute, chronic, congenital, and infectious diseases. Apart from traditional remedies, tissue engineering (TE) is among the most effective methods for the repair of damaged tissues via merging the cells, growth factors, and scaffolds. With regards to TE scaffold fabrication technology, polyurethane (PU), a high-performance medical grade synthetic polymer and bioactive material has gained significant attention. PU possesses exclusive biocompatibility, biodegradability, and modifiable chemical, mechanical and thermal properties, owing to its unique structure-properties relationship. During the past few decades, PU TE scaffold bioactive properties have been incorporated or enhanced with biodegradable, electroactive, surface-functionalised, ayurvedic products, ceramics, glass, growth factors, metals, and natural polymers, resulting in the formation of modified polyurethanes (MPUs). This review focuses on the recent advances of PU/MPU scaffolds, especially on the biomedical applications in soft and hard tissue engineering and regenerative medicine. The scientific issues with regards to the PU/MPU scaffolds, such as biodegradation, electroactivity, surface functionalisation, and incorporation of active moieties are also highlighted along with some suggestions for future work.

Progress in electrospun composite nanofibers: composition, performance and applications for tissue engineering

The discovery of novel methods to fabricate optimal scaffolds that mimic both mechanical and functional properties of the extracellular matrix (ECM) has always been the "holy grail" in tissue engineering. In recent years, electrospinning has emerged as an attractive material fabrication method and has been widely applied in tissue engineering due to its capability of producing non-woven and nanoscale fibers. However, from the perspective of biomimicry, it is difficult for single-component electrospun fiber membranes to achieve the biomimetic purposes of the multi-component extracellular matrix. Based on electrospinning, various functional components can be efficiently and expediently introduced into the membranes, and through the complementation and correlation of the properties of each component, composite materials with comprehensive and superior properties are obtained while maintaining the primitive merits of each component. In this review, we will provide an overview of the attempts made to fabricate electrospinning-based composite tissue engineering materials in the past few decades, which have been divided into organic additives, inorganic additives and organic-inorganic additives.

Enriched Mechanical Strength and Bone Mineralisation of Electrospun Biomimetic Scaffold Laden with Ylang Ylang Oil and Zinc Nitrate for Bone Tissue Engineering

Scaffolds supplemented with naturally derived materials seem to be a good choice in bone tissue engineering. This study aims to develop polyurethane (PU) nanofibers added with ylang ylang (YY) and zinc nitrate (ZnNO₃) using the electrospinning method. Field emission scanning electron microscopy (FESEM) images showed that the diameter of the PU nanofibers (869 ± 122 nm) was reduced with the addition of YY and ZnNO₃ (PU/YY-467 ± 132 nm and PU/YY/ZnNO₃-290 ± 163 nm). Fourier transform infrared (FTIR), a thermal gravimetric analysis (TGA) and an X-ray diffraction (XRD) analysis confirmed the interactions between PU with YY and ZnNO₃. In addition, a thermal gravimetric analysis (TGA) study revealed the improved thermal stability for PU/YY and a slight reduction in the thermal stability for PU/YY/ZnNO₃. A tensile test indicated that the addition of YY and ZnNO3 (PU/YY-12.32 MPa and PU/YY/ZnNO₃-14.90 MPa) improved the mechanical properties of the pristine PU (6.83 MPa). The electrospun PU/YY (524 nm) and PU/YY/ZnNO₃ (284 nm) showed a reduced surface roughness when compared with the pristine PU (776 nm) as depicted in the atomic force microscopy (AFM) analysis. The addition of YY and ZnNO₃ improved the anticoagulant and biocompatibility nature of the pristine PU. Furthermore, the bone mineralization study depicted the improved calcium deposition in the fabricated composites (PU/YY-7.919% and PU/YY/ZnNO₃-10.150%) compared to the pristine PU (5.323%). Hence, the developed composites with desirable physico-chemical properties, biocompatibility and calcium deposition can serve as plausible candidates for bone tissue engineering.

Enhanced mechanical, thermal and biocompatible nature of dual component electrospun nanocomposite for bone tissue engineering

Traditionally, in the Asian continent, oils are a widely accepted choice for alleviating bone-related disorders. The design of scaffolds resembling the extracellular matrix (ECM) is of great significance in bone tissue engineering. In this study, a multicomponent polyurethane (PU), canola oil (CO) and neem oil (NO) scaffold was developed using the electrospinning technique. The fabricated nanofibers were subjected to various physicochemical and biological testing to validate its suitability for bone tissue engineering. Morphological analysis of the multicomponent scaffold showed a reduction in fiber diameter (PU/CO-853 ± 141.27 nm and PU/CO/NO-633 ± 137.54 nm) compared to PU (890 ± 116.911 nm). The existence of CO and NO in PU matrix was confirmed by an infrared spectrum (IR) with the formation of hydrogen bond. PU/CO displayed a mean contact angle of 108.7° ± 0.58 while the PU/CO/NO exhibited hydrophilic nature with an angle of 62.33° ± 2.52. The developed multicomponent also exhibited higher thermal stability and increased mechanical strength compared to the pristine PU. Atomic force microscopy (AFM) analysis depicted lower surface roughness for the nanocomposites (PU/CO-389 nm and PU/CO/NO-323 nm) than the pristine PU (576 nm). Blood compatibility investigation displayed the anticoagulant nature of the composites. Cytocompatibility studies revealed the non-toxic nature of the developed composites with human fibroblast cells (HDF) cells. The newly developed porous PU nanocomposite scaffold comprising CO and NO may serve as a potential candidate for bone tissue engineering.

Electrospun Combination of Peppermint Oil and Copper Sulphate with Conducive Physico-Chemical properties for Wound Dressing Applications

The ultimate goal in tissue engineering is to fabricate a scaffold which could mimic the native tissue structure. In this work, the physicochemical and biocompatibility properties of electrospun composites based on polyurethane (PU) with added pepper mint (PM) oil and copper sulphate (CuSO₄) were investigated. Field Emission Electron microscope (FESEM) study depicted the increase in mean fiber diameter for PU/PM and decrease in fiber diameter for PU/PM/CuSO₄ compared to the pristine PU. Fourier transform infrared spectroscopy (FTIR) analysis revealed the formation of a hydrogen bond for the fabricated composites as identified by an alteration in PU peak intensity. Contact angle analysis presented the hydrophobic nature of pristine PU and PU/PM while the PU/PM/CuSO₄ showed hydrophilic behavior. Atomic force microscopy (AFM) analysis revealed the increase in the surface roughness for the PU/PM while PU/PM/CuSO₄ showed a decrease in surface roughness compared to the pristine PU. Blood compatibility studies showed improved blood clotting time and less toxic behavior for the developed composites than the pristine PU. Finally, the cell viability of the fabricated composite was higher than the pristine PU as indicated in the MTS assay. Hence, the fabricated wound dressing composite based on PU with added PM and CuSO₄ rendered a better physicochemical and biocompatible nature, making it suitable for wound healing applications.