1
|
Fernández A, Clavería I, Pina C, Elduque D. Predictive Methodology for Quality Assessment in Injection Molding Comparing Linear Regression and Neural Networks. Polymers (Basel) 2023; 15:3915. [PMID: 37835964 PMCID: PMC10575229 DOI: 10.3390/polym15193915] [Citation(s) in RCA: 0] [Impact Index Per Article: 0] [Reference Citation Analysis] [Abstract] [Key Words] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Received: 08/30/2023] [Revised: 09/25/2023] [Accepted: 09/26/2023] [Indexed: 10/15/2023] Open
Abstract
The use of recycled polypropylene in industry to reduce environmental impact is increasing. Design for manufacturing and process simulation is a key stage in the development of plastic parts. Traditionally, a trial-and-error methodology is followed to eliminate uncertainties regarding geometry and process. A new proposal is presented, combining simulation with the design of experiments and creating prediction models for seven different process and part quality output features. These models are used to optimize the design without developing additional time-consuming simulations. The study aims to compare the precision and correlation of these models. The methods used are linear regression and artificial neural network (ANN) fitting. A wide range of eight injection parameters and geometry variations are used as inputs. The predictability of nonlinear behavior and compensatory effects due to the complex relationships between this wide set of parameter combinations is analyzed further in the state of the art. Results show that only Back Propagation Neural Networks (BPNN) are suitable for correlating all quality features in a single formula. The use of prediction models accelerates the optimization of part design, applying multiple criteria to support decision-making. The methodology is applied to the design of a plastic support for induction hobs. Furthermore, this methodology has demonstrated that a weight reduction of 27% is feasible. However, it is necessary to combine process parameters that differ from the standard ones with a non-uniform thickness distribution so that the remaining injection parameters, material properties, and dimensions fall within tolerances.
Collapse
Affiliation(s)
- Angel Fernández
- Department of Mechanical Engineering, University of Zaragoza EINA, María de Luna, 3, 50018 Zaragoza, Spain; (I.C.); (C.P.); (D.E.)
| | | | | | | |
Collapse
|
2
|
Cao Y, Taghvaie Nakhjiri A, Ghadiri M. Computational fluid dynamics comparison of prevalent liquid absorbents for the separation of SO 2 acidic pollutant inside a membrane contactor. Sci Rep 2023; 13:1300. [PMID: 36693929 PMCID: PMC9873644 DOI: 10.1038/s41598-023-28580-6] [Citation(s) in RCA: 0] [Impact Index Per Article: 0] [Reference Citation Analysis] [Abstract] [Key Words] [Track Full Text] [Figures] [Journal Information] [Subscribe] [Scholar Register] [Received: 08/27/2022] [Accepted: 01/20/2023] [Indexed: 01/25/2023] Open
Abstract
In recent years, the emission of detrimental acidic pollutants to the atmosphere has raised the concerns of scientists. Sulphur dioxide (SO2) is a harmful greenhouse gas, which its abnormal release to the atmosphere may cause far-ranging environmental and health effects like acid rain and respiratory problems. Therefore, finding promising techniques to alleviate the emission of this greenhouse gas may be of great urgency towards environmental protection. This paper aims to evaluate the potential of three novel absorbents (seawater (H2O), dimethyl aniline (DMA) and sodium hydroxide (NaOH) to separate SO2 acidic pollutant from SO2/air gaseous stream inside the hollow fiber membrane contactor (HFMC). To reach this goal, a CFD-based simulation was developed to predict the results. Also, a mathematical model was applied to theoretically evaluate the transport equations in different compartments of contactor. Comparison of the results has implied seawater is the most efficient liquid absorbent for separating SO2. After seawater, NaOH and DMA are placed at the second and third rank (99.36% separation using seawater > 62% separation using NaOH > 55% separation using DMA). Additionally, the influence of operational parameters (i.e., gas and liquid flow rates) and also membrane/module parameters (i.e., length of membrane module, hollow fibers' number and porosity) on the SO2 separation percentage is investigated as another highlight of this paper.
Collapse
Affiliation(s)
- Yan Cao
- grid.460183.80000 0001 0204 7871School of Computer Science and Engineering, Xi’an Technological University, Xi’an, 710021 People’s Republic of China
| | - Ali Taghvaie Nakhjiri
- grid.411463.50000 0001 0706 2472Department of Petroleum and Chemical Engineering, Science and Research Branch, Islamic Azad University, Tehran, Iran
| | - Mahdi Ghadiri
- grid.444918.40000 0004 1794 7022Institute of Research and Development, Duy Tan University, Da Nang, 550000 Vietnam ,grid.444918.40000 0004 1794 7022The Faculty of Environment and Chemical Engineering, Duy Tan University, Da Nang, 550000 Vietnam
| |
Collapse
|
3
|
Optimization of tamoxifen solubility in carbon dioxide supercritical fluid and investigating other molecular targets using advanced artificial intelligence models. Sci Rep 2023; 13:1313. [PMID: 36693828 PMCID: PMC9873658 DOI: 10.1038/s41598-022-25562-y] [Citation(s) in RCA: 1] [Impact Index Per Article: 1.0] [Reference Citation Analysis] [Abstract] [Key Words] [Track Full Text] [Figures] [Journal Information] [Subscribe] [Scholar Register] [Received: 05/22/2022] [Accepted: 12/01/2022] [Indexed: 01/25/2023] Open
Abstract
Particle size, shape and morphology can be considered as the most significant functional parameters, their effects on increasing the performance of oral solid dosage formulation are indisputable. Supercritical Carbon dioxide fluid (SCCO2) technology is an effective approach to control the above-mentioned parameters in oral solid dosage formulation. In this study, drug solubility measuring is investigated based on artificial intelligence model using carbon dioxide as a common supercritical solvent, at different pressure and temperature, 120-400 bar, 308-338 K. The results indicate that pressure has a strong effect on drug solubility. In this investigation, Decision Tree (DT), Adaptive Boosted Decision Trees (ADA-DT), and Nu-SVR regression models are used for the first time as a novel model on the available data, which have two inputs, including pressure, X1 = P(bar) and temperature, X2 = T(K). Also, output is Y = solubility. With an R-squared score, DT, ADA-DT, and Nu-SVR showed results of 0.836, 0.921, and 0.813. Also, in terms of MAE, they showed error rates of 4.30E-06, 1.95E-06, and 3.45E-06. Another metric is RMSE, in which DT, ADA-DT, and Nu-SVR showed error rates of 4.96E-06, 2.34E-06, and 5.26E-06, respectively. Due to the analysis outputs, ADA-DT selected as the best and novel model and the find optimal outputs can be shown via vector: (x1 = 309, x2 = 317.39, Y1 = 7.03e-05).
Collapse
|
4
|
Davidson M, Rashidi N, Nurgali K, Apostolopoulos V. The Role of Tryptophan Metabolites in Neuropsychiatric Disorders. Int J Mol Sci 2022; 23:ijms23179968. [PMID: 36077360 PMCID: PMC9456464 DOI: 10.3390/ijms23179968] [Citation(s) in RCA: 34] [Impact Index Per Article: 17.0] [Reference Citation Analysis] [Abstract] [MESH Headings] [Track Full Text] [Download PDF] [Journal Information] [Subscribe] [Scholar Register] [Received: 07/27/2022] [Revised: 08/27/2022] [Accepted: 08/31/2022] [Indexed: 12/20/2022] Open
Abstract
In recent decades, neuropsychiatric disorders such as major depressive disorder, schizophrenia, bipolar, etc., have become a global health concern, causing various detrimental influences on patients. Tryptophan is an important amino acid that plays an indisputable role in several physiological processes, including neuronal function and immunity. Tryptophan’s metabolism process in the human body occurs using different pathways, including the kynurenine and serotonin pathways. Furthermore, other biologically active components, such as serotonin, melatonin, and niacin, are by-products of Tryptophan pathways. Current evidence suggests that a functional imbalance in the synthesis of Tryptophan metabolites causes the appearance of pathophysiologic mechanisms that leads to various neuropsychiatric diseases. This review summarizes the pharmacological influences of tryptophan and its metabolites on the development of neuropsychiatric disorders. In addition, tryptophan and its metabolites quantification following the neurotransmitters precursor are highlighted. Eventually, the efficiency of various biomarkers such as inflammatory, protein, electrophysiological, genetic, and proteomic biomarkers in the diagnosis/treatment of neuropsychiatric disorders was discussed to understand the biomarker application in the detection/treatment of various diseases.
Collapse
Affiliation(s)
- Majid Davidson
- Institute for Health and Sport, Victoria University, Melbourne, VIC 3011, Australia
- Regenerative Medicine and Stem Cells Program, Australian Institute of Musculoskeletal Science (AIMSS), Melbourne, VIC 3021, Australia
| | - Niloufar Rashidi
- Institute for Health and Sport, Victoria University, Melbourne, VIC 3011, Australia
- Regenerative Medicine and Stem Cells Program, Australian Institute of Musculoskeletal Science (AIMSS), Melbourne, VIC 3021, Australia
| | - Kulmira Nurgali
- Institute for Health and Sport, Victoria University, Melbourne, VIC 3011, Australia
- Regenerative Medicine and Stem Cells Program, Australian Institute of Musculoskeletal Science (AIMSS), Melbourne, VIC 3021, Australia
- Department of Medicine Western Health, Faculty of Medicine, Dentistry and Health Sciences, University of Melbourne, Melbourne, VIC 3010, Australia
| | - Vasso Apostolopoulos
- Institute for Health and Sport, Victoria University, Melbourne, VIC 3011, Australia
- Immunology Program, Australian Institute of Musculoskeletal Science (AIMSS), Melbourne, VIC 3021, Australia
- Correspondence:
| |
Collapse
|
5
|
Jin H, Andalib V, Yasin G, Bokov DO, Kamal M, Alashwal M, Ghazali S, Algarni M, Mamdouh A. Computational simulation using machine learning models in prediction of CO2 absorption in environmental applications. J Mol Liq 2022. [DOI: 10.1016/j.molliq.2022.119159] [Citation(s) in RCA: 3] [Impact Index Per Article: 1.5] [Reference Citation Analysis] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Indexed: 01/22/2023]
|
6
|
Development of a machine learning computational technique for estimation of molecular diffusivity of nonelectrolyte organic molecules in aqueous media. J Mol Liq 2022. [DOI: 10.1016/j.molliq.2022.118763] [Citation(s) in RCA: 0] [Impact Index Per Article: 0] [Reference Citation Analysis] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Indexed: 11/16/2022]
|
7
|
State-of-the-Art Review on the Application of Membrane Bioreactors for Molecular Micro-Contaminant Removal from Aquatic Environment. MEMBRANES 2022; 12:membranes12040429. [PMID: 35448399 PMCID: PMC9032214 DOI: 10.3390/membranes12040429] [Citation(s) in RCA: 3] [Impact Index Per Article: 1.5] [Reference Citation Analysis] [Abstract] [Key Words] [Track Full Text] [Download PDF] [Figures] [Subscribe] [Scholar Register] [Received: 02/20/2022] [Revised: 03/29/2022] [Accepted: 04/08/2022] [Indexed: 12/27/2022]
Abstract
In recent years, the emergence of disparate micro-contaminants in aquatic environments such as water/wastewater sources has eventuated in serious concerns about humans’ health all over the world. Membrane bioreactor (MBR) is considered a noteworthy membrane-based technology, and has been recently of great interest for the removal micro-contaminants. The prominent objective of this review paper is to provide a state-of-the-art review on the potential utilization of MBRs in the field of wastewater treatment and micro-contaminant removal from aquatic/non-aquatic environments. Moreover, the operational advantages of MBRs compared to other traditional technologies in removing disparate sorts of micro-contaminants are discussed to study the ways to increase the sustainability of a clean water supplement. Additionally, common types of micro-contaminants in water/wastewater sources are introduced and their potential detriments on humans’ well-being are presented to inform expert readers about the necessity of micro-contaminant removal. Eventually, operational challenges towards the industrial application of MBRs are presented and the authors discuss feasible future perspectives and suitable solutions to overcome these challenges.
Collapse
|
8
|
Zhu X, Wang X, Liu K, Zhou S, Alqsair UF, El-Shafay A. Machine learning simulation of Cr (VI) separation from aqueous solutions via a hierarchical nanostructure material. J Mol Liq 2022. [DOI: 10.1016/j.molliq.2022.118565] [Citation(s) in RCA: 2] [Impact Index Per Article: 1.0] [Reference Citation Analysis] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Indexed: 11/25/2022]
|
9
|
Zhuang W, Hachem K, Bokov D, Javed Ansari M, Taghvaie Nakhjiri A. Ionic liquids in pharmaceutical industry: A systematic review on applications and future perspectives. J Mol Liq 2022. [DOI: 10.1016/j.molliq.2021.118145] [Citation(s) in RCA: 27] [Impact Index Per Article: 13.5] [Reference Citation Analysis] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Indexed: 01/04/2023]
|
10
|
Chen P, Ansari MJ, Bokov D, Suksatan W, Rahman ML, Sarjadi MS. A review on key aspects of wet granulation process for continuous pharmaceutical manufacturing of solid dosage oral formulations. ARAB J CHEM 2022. [DOI: 10.1016/j.arabjc.2021.103598] [Citation(s) in RCA: 0] [Impact Index Per Article: 0] [Reference Citation Analysis] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Indexed: 11/25/2022] Open
|
11
|
Numerical investigation of ibuprofen removal from pharmaceutical wastewater using adsorption process. Sci Rep 2021; 11:24478. [PMID: 34966176 PMCID: PMC8716529 DOI: 10.1038/s41598-021-04185-9] [Citation(s) in RCA: 5] [Impact Index Per Article: 1.7] [Reference Citation Analysis] [Abstract] [Track Full Text] [Download PDF] [Figures] [Journal Information] [Subscribe] [Scholar Register] [Received: 07/02/2021] [Accepted: 12/07/2021] [Indexed: 11/09/2022] Open
Abstract
In the present study, a mathematical modelling was developed to investigate ibuprofen adsorption from pharmaceutical wastewater into activated carbon and sonicated activated carbon. The developed model was dissolved based on the finite element method. Effect of different operating parameters including particle porosity and diameter as well as ibuprofen diffusion coefficient in solution on the amount of ibuprofen adsorption at different time point and position in the particle were evaluated. It was found good agreement between experimental values and modelling results in terms of ibuprofen adsorption as a function time. The 84.5% and 92.5% of maximum adsorption was achieved for the AC and SAC at the centre of particle after 150 min. Increasing the particle porosity and ibuprofen diffusion coefficient was improved the ibuprofen adsorption into the adsorbent. However, the particle diameter had negative impact on the system performance. There was a decrease in solute adsorption from 84.10 to 7.30 mg/g and from 106 to 15.73 mg/g for the AC and SAC respectively with increasing the particle radius from 173 to 500 µm. Finally, it was concluded that the particle specifications play important role in the adsorption process as it was observed considerable change in the amount of adsorption at different positions in the particle with changing the particle specifications.
Collapse
|
12
|
A state-of-the-art review on the application of various pharmaceutical nanoparticles as a promising technology in cancer treatment. ARAB J CHEM 2021. [DOI: 10.1016/j.arabjc.2021.103352] [Citation(s) in RCA: 13] [Impact Index Per Article: 4.3] [Reference Citation Analysis] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Indexed: 12/12/2022] Open
|
13
|
Li M, Khan A, Mahlouji MD, Zare MH, Albadarin AB. Catalytic conversion modeling of methanol in dehydration reactor using Voronoi 3D pore network model. ARAB J CHEM 2021. [DOI: 10.1016/j.arabjc.2021.103284] [Citation(s) in RCA: 3] [Impact Index Per Article: 1.0] [Reference Citation Analysis] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Indexed: 12/28/2022] Open
|
14
|
Investigation on performance of particle swarm optimization (PSO) algorithm based fuzzy inference system (PSOFIS) in a combination of CFD modeling for prediction of fluid flow. Sci Rep 2021; 11:1505. [PMID: 33452362 PMCID: PMC7810899 DOI: 10.1038/s41598-021-81111-z] [Citation(s) in RCA: 7] [Impact Index Per Article: 2.3] [Reference Citation Analysis] [Abstract] [Key Words] [Track Full Text] [Download PDF] [Figures] [Journal Information] [Subscribe] [Scholar Register] [Received: 08/26/2020] [Accepted: 01/04/2021] [Indexed: 01/29/2023] Open
Abstract
Herein, a reactor of bubble column type with non-equilibrium thermal condition between air and water is mechanistically modeled and simulated by the CFD technique. Moreover, the combination of the adaptive network (AN) trainer with the fuzzy inference system (FIS) as the artificial intelligence method calling ANFIS has already shown potential in the optimization of CFD approach. Although the artificial intelligence method of particle swarm optimization (PSO) algorithm based fuzzy inference system (PSOFIS) has a good background for optimizing the other fields of research, there are not any investigations on the cooperation of this method with the CFD. The PSOFIS can reduce all the difficulties and simplify the investigation by elimination of the additional CFD simulations. In fact, after achieving the best intelligence, all the predictions can be done by the PSOFIS instead of the massive computational efforts needed for CFD modeling. The first aim of this study is to develop the PSOFIS for use in the CFD approach application. The second one is to make a comparison between the PSOFIS and ANFIS for the accurate prediction of the CFD results. In the present study, the CFD data are learned by the PSOFIS for prediction of the water velocity inside the bubble column. The values of input numbers, swarm sizes, and inertia weights are investigated for the best intelligence. Once the best intelligence is achieved, there is no need to mesh refinement in the CFD domain. The mesh density can be increased, and the newer predictions can be done in an easier way by the PSOFIS with much less computational efforts. For a strong verification, the results of the PSOFIS in the prediction of the liquid velocity are compared with those of the ANFIS. It was shown that for the same fuzzy set parameters, the PSOFIS predictions are closer to the CFD in comparison with the ANFIS. The regression number (R) of the PSOFIS (0.98) was a little more than that of the ANFIS (0.97). The PSOFIS showed a powerful potential in mesh density increment from 9477 to 774,468 and accurate predictions for the new nodes independent of the CFD modeling.
Collapse
|
15
|
Thermal prediction of turbulent forced convection of nanofluid using computational fluid dynamics coupled genetic algorithm with fuzzy interface system. Sci Rep 2021; 11:1308. [PMID: 33446789 PMCID: PMC7809283 DOI: 10.1038/s41598-020-80207-2] [Citation(s) in RCA: 12] [Impact Index Per Article: 4.0] [Reference Citation Analysis] [Abstract] [Track Full Text] [Download PDF] [Figures] [Journal Information] [Subscribe] [Scholar Register] [Received: 09/09/2020] [Accepted: 12/17/2020] [Indexed: 11/22/2022] Open
Abstract
Computational fluid dynamics (CFD) simulating is a useful methodology for reduction of experiments and their associated costs. Although the CFD could predict all hydro-thermal parameters of fluid flows, the connections between such parameters with each other are impossible using this approach. Machine learning by the artificial intelligence (AI) algorithm has already shown the ability to intelligently record engineering data. However, there are no studies available to deeply investigate the implicit connections between the variables resulted from the CFD. The present investigation tries to conduct cooperation between the mechanistic CFD and the artificial algorithm. The genetic algorithm is combined with the fuzzy interface system (GAFIS). Turbulent forced convection of Al2O3/water nanofluid in a heated tube is simulated for inlet temperatures (i.e., 305, 310, 315, and 320 K). GAFIS learns nodes coordinates of the fluid, the inlet temperatures, and turbulent kinetic energy (TKE) as inputs. The fluid temperature is learned as output. The number of inputs, population size, and the component are checked for the best intelligence. Finally, at the best intelligence, a formula is developed to make a relationship between the output (i.e. nanofluid temperatures) and inputs (the coordinates of the nodes of the nanofluid, inlet temperature, and TKE). The results revealed that the GAFIS intelligence reaches the highest level when the input number, the population size, and the exponent are 5, 30, and 3, respectively. Adding the turbulent kinetic energy as the fifth input, the regression value increases from 0.95 to 0.98. This means that by considering the turbulent kinetic energy the GAFIS reaches a higher level of intelligence by distinguishing the more difference between the learned data. The CFD and GAFIS predicted the same values of the nanofluid temperature.
Collapse
|
16
|
Performance and application analysis of ANFIS artificial intelligence for pressure prediction of nanofluid convective flow in a heated pipe. Sci Rep 2021; 11:902. [PMID: 33441682 PMCID: PMC7806621 DOI: 10.1038/s41598-020-79628-w] [Citation(s) in RCA: 13] [Impact Index Per Article: 4.3] [Reference Citation Analysis] [Abstract] [Track Full Text] [Download PDF] [Figures] [Journal Information] [Subscribe] [Scholar Register] [Received: 09/08/2020] [Accepted: 12/10/2020] [Indexed: 11/08/2022] Open
Abstract
Heat transfer augmentation of the nanofluids is still an attractive concept for researchers due to rising demands for designing efficient heat transfer fluids. However, the pressure loss arisen from the suspension of nanoparticles in liquid is known as a drawback for developing such novel fluids. Therefore, prediction of the nanofluid pressure, especially in internal flows, has been focused on studies. Computational fluid dynamics (CFD) is a commonly used approach for such a prediction of fluid flow. The CFD tools are perfect and precise in prediction of the fluid flow parameters. But they might be time-consuming and expensive, especially for complex models such as 3-dimension modeling and turbulent flow. In addition, the CFD could just predict the pressure, and it is disabled for finding the relationship of such variables. This study is intended to show the performance of the artificial intelligence (AI) algorithm as an auxiliary method for cooperation with the CFD. The turbulent flow of Cu/water nanofluid warming up in a pipe is considered as a sample of a physical phenomenon. The AI algorithm learns the CFD results. Then, the relation between the CFD results is discovered by the AI algorithm. For this purpose, the adaptive network-based fuzzy inference system (ANFIS) is adopted as AI tool. The intelligence condition of the ANFIS is checked by benchmarking the CFD results. The paper outcomes indicated that the ANFIS intelligence is met by employing gauss2mf in the model as the membership function and x, y, and z coordinates, the nanoparticle volume fraction, and the temperature as the inputs. The pressure predicted by the ANFIS at this condition is the same as that predicted by the CFD. The artificial intelligence of ANFIS could find the relation of the nanofluid pressure to the nanoparticle fraction and the temperature. The CFD simulation took much more time (90-110 min) than the total time of the learning and the prediction of the ANFIS (369 s). The CFD modeling was done on a workstation computer, while the ANFIS method was run on a normal desktop.
Collapse
|
17
|
Velocity prediction of nanofluid in a heated porous pipe: DEFIS learning of CFD results. Sci Rep 2021; 11:1209. [PMID: 33441681 PMCID: PMC7806800 DOI: 10.1038/s41598-020-79913-8] [Citation(s) in RCA: 5] [Impact Index Per Article: 1.7] [Reference Citation Analysis] [Abstract] [Key Words] [Track Full Text] [Download PDF] [Figures] [Journal Information] [Subscribe] [Scholar Register] [Received: 09/09/2020] [Accepted: 12/15/2020] [Indexed: 01/29/2023] Open
Abstract
Utilizing artificial intelligence algorithm of adaptive network-based fuzzy inference system (ANFIS) in combination with the computational lfuid dynamics (CFD) has recently revealed great potential as an auxiliary method for simulating challenging fluid mechnics problems. This research area is at the beginning, and needs sophisticated algorithms to be developed. No studies are available to consider the efficiency of the other trainers like differential evolution (DE) integrating with the FIS for capturing the pattern of the simulation results generated by CFD technique. Besides, the adjustment of the tuning parameters of the artificial intelligence (AI) algorithm for finding the highest level of intelligence is unavailable. The performance of AI algorithms in the meshing process has not been considered yet. Therfore, herein the Al2O3/water nanofluid flow in a porous pipe is simulated by a sophisticated hybrid approach combining mechnsitic model (CFD) and AI. The finite volume method (FVM) is employed as the CFD approach. Also, the differential evolution-based fuzzy inference system (DEFIS) is used for learning the CFD results. The DEFIS learns the nanofluid velocity in the y-direction, as output, and the nodes coordinates (i.e., x, y, and z), as inputs. The intelligence of the DEFIS is assessed by adjusting the methd's variables including input number, population number, and crossover. It was found that the DEFIS intelligence is related to the input number of 3, the crossover of 0.8, and the population number of 120. In addition, the nodes increment from 4833 to 774,468 was done by the DEFIS. The DEFIS predicted the velocity for the new dense mesh without using the CFD data. Finally, all CFD results were covered with the new predictions of the DEFIS.
Collapse
|
18
|
Babanezhad M, Nakhjiri AT, Marjani A, Rezakazemi M, Shirazian S. Evaluation of product of two sigmoidal membership functions (psigmf) as an ANFIS membership function for prediction of nanofluid temperature. Sci Rep 2020; 10:22337. [PMID: 33339873 PMCID: PMC7749144 DOI: 10.1038/s41598-020-79293-z] [Citation(s) in RCA: 7] [Impact Index Per Article: 1.8] [Reference Citation Analysis] [Abstract] [Track Full Text] [Download PDF] [Figures] [Journal Information] [Subscribe] [Scholar Register] [Received: 09/06/2020] [Accepted: 12/07/2020] [Indexed: 11/12/2022] Open
Abstract
A nanofluid containing water and nanoparticles made of copper (Cu) inside a cavity with square shape is simulated utilizing the computational fluid dynamics (CFD) approach. The nanoparticles made up 15% of the nanofluid. By performing the simulation, the CFD output is characterized by the coordinates in the x, y, nanofluid temperature, and velocity in the y-direction that these outputs are obtained for different physical time iterations. Moreover, the CFD outputs are examined by one of the artificial techniques, i.e. adaptive network-based fuzzy inference system (ANFIS). For this purpose, the data was clustered via grid partition clustering, and the type of membership functions (MFs) was chosen product of two sigmoidal membership functions (psigmf). After reaching 99.9% of intelligence in ANFIS, the nanofluid temperature is predicted for the entire data, which are included in the learning processes. The results showed that the method of ANFIS can predict the thermal properties in different physical times at different computing points without having a training background at those times. Additionally, this study shows that with three membership functions at each input, the model’s accuracy is higher than four functions.
Collapse
Affiliation(s)
- Meisam Babanezhad
- Institute of Research and Development, Duy Tan University, Da Nang, 550000, Vietnam.,Faculty of Electrical - Electronic Engineering, Duy Tan University, Da Nang, 550000, Vietnam
| | - Ali Taghvaie Nakhjiri
- Department of Petroleum and Chemical Engineering, Science and Research Branch, Islamic Azad University, Tehran, Iran
| | - Azam Marjani
- Department for Management of Science and Technology Development, Ton Duc Thang University, Ho Chi Minh City, Vietnam. .,Faculty of Applied Sciences, Ton Duc Thang University, Ho Chi Minh City, Vietnam.
| | - Mashallah Rezakazemi
- Faculty of Chemical and Materials Engineering, Shahrood University of Technology, Shahrood, Iran
| | - Saeed Shirazian
- Laboratory of Computational Modeling of Drugs, South Ural State University, 76 Lenin prospekt, 454080, Chelyabinsk, Russia
| |
Collapse
|
19
|
Babanezhad M, Behroyan I, Nakhjiri AT, Marjani A, Shirazian S. Computational Modeling of Transport in Porous Media Using an Adaptive Network-Based Fuzzy Inference System. ACS OMEGA 2020; 5:30826-30835. [PMID: 33324792 PMCID: PMC7726747 DOI: 10.1021/acsomega.0c04497] [Citation(s) in RCA: 16] [Impact Index Per Article: 4.0] [Reference Citation Analysis] [Abstract] [Track Full Text] [Subscribe] [Scholar Register] [Received: 07/05/2020] [Accepted: 11/06/2020] [Indexed: 05/24/2023]
Abstract
This investigation is conducted to study the integration of the artificial intelligence (AI) method with computational fluid dynamics (CFD). The case study is hydrodynamic and heat-transfer analyses of water flow in a metal foam tube under a constant wall heat flux (i.e., 55 kW/m2). The adaptive network-based fuzzy inference system (ANFIS) is an AI method. A 3D CFD model is established in ANSYS-FLUENT software. The velocity of the fluid in the x-direction (Ux) is considered as an output of the ANFIS. The x, y, and z coordinates of the node's location are added to the ANFIS step-by-step to achieve the best intelligence. The number and type of membership functions (MFs) are changed in each step. The training process is done by the CFD results on the tube cross-sections at different lengths (i.e., z = 0.1, 0.2, 0.3, 0.4, 0.6, 0.7, 0.8, and 0.9), while all data (including z = 0.5) are selected for the testing process. The results showed that the ANFIS reaches the best intelligence with all three inputs, five MFs, and "gbellmf"-type MF. At this condition, the regression number is close to 1.
Collapse
Affiliation(s)
- Meisam Babanezhad
- Institute
of Research and Development, Duy Tan University, Da Nang 550000, Vietnam
- Faculty
of Electrical−Electronic Engineering, Duy Tan University, Da Nang 550000, Vietnam
| | - Iman Behroyan
- Faculty
of Mechanical and Energy Engineering, Shahid
Beheshti University, Tehran 1983969411, Iran
| | - Ali Taghvaie Nakhjiri
- Department of Petroleum and Chemical
Engineering, Science and Research Branch, Islamic Azad University, Tehran 1477893855, Iran
| | - Azam Marjani
- Department
for Management of Science and Technology Development, Ton Duc Thang University, Ho Chi
Minh City 758307, Vietnam
- Faculty
of
Applied Sciences, Ton Duc Thang University, Ho Chi Minh City, Vietnam
| | - Saeed Shirazian
- Department
of Chemical Sciences, Bernal Institute, University of Limerick, Limerick V94 T9PX, Ireland
- Laboratory
of Computational Modeling of Drugs, South
Ural State University, 76 Lenin prospekt, Chelyabinsk 454080, Russia
| |
Collapse
|
20
|
Babanezhad M, Behroyan I, Nakhjiri AT, Marjani A, Rezakazemi M, Shirazian S. High-performance hybrid modeling chemical reactors using differential evolution based fuzzy inference system. Sci Rep 2020; 10:21304. [PMID: 33277606 PMCID: PMC7718251 DOI: 10.1038/s41598-020-78277-3] [Citation(s) in RCA: 17] [Impact Index Per Article: 4.3] [Reference Citation Analysis] [Abstract] [Track Full Text] [Download PDF] [Figures] [Journal Information] [Subscribe] [Scholar Register] [Received: 08/14/2020] [Accepted: 11/23/2020] [Indexed: 11/09/2022] Open
Abstract
Bubbly flow behavior simulation in two-phase chemical reactors such bubble column type reactors is widely employed for chemical industry purposes. The computational fluid dynamics (CFD) approach has been employed by engineers and researchers for modeling these types of chemical reactors. In spite of the CFD robustness for simulating transport phenomena and chemical reactions in these reactors, this approach has been known as expensive for modeling such turbulent complex flows. Artificial intelligence (AI) algorithm of the adaptive network-based fuzzy inference system (ANFIS) are largely understood and utilized for the CFD approach optimization. In this hybrid approach, the CFD findings are learned by AI algorithms like ANFIS to save computational time and expenses. Once the pattern of the CFD results have been captured by the AI model, this hybrid model can be then used for process simulation and optimization. As such, there is no need for further simulations of new conditions. The objective of this paper is to obviate the need for expensive CFD computations for two-phase flows in chemical reactors via coupling CFD data to an AI algorithm, i.e., differential evolution based fuzzy inference system (DEFIS). To do so, air velocity as the output and the values of the x, and y coordinates, water velocity, and time step as the inputs are inputted the AI model for learning the flow pattern. The effects of cross over as the DE parameter and also the number of inputs on the best intelligence are investigated. Indeed, DEFIS correlates the air velocity to the nodes coordinates, time, and liquid velocity and then after the CFD modeling could be replaced with the simple correlation. For the first time, a comparison is made between the ANFIS and the DEFIS performances in terms of the prediction capability of the gas (air) velocity. The results released that both ANFIS and DEFIS could accurately predict the CFD pattern. The prediction times of both methods were obtained to be equal. However, the learning time of the DEFIS was fourfold of ANFIS.
Collapse
Affiliation(s)
- Meisam Babanezhad
- Institute of Research and Development, Duy Tan University, Da Nang, 550000, Vietnam.,Faculty of Electrical-Electronic Engineering, Duy Tan University, Da Nang, 550000, Vietnam
| | - Iman Behroyan
- Faculty of Mechanical and Energy Engineering, Shahid Beheshti University, Tehran, Iran
| | - Ali Taghvaie Nakhjiri
- Department of Petroleum and Chemical Engineering, Science and Research Branch, Islamic Azad University, Tehran, Iran
| | - Azam Marjani
- Department for Management of Science and Technology Development, Ton Duc Thang University, Ho Chi Minh City, Vietnam. .,Faculty of Applied Sciences, Ton Duc Thang University, Ho Chi Minh City, Vietnam.
| | - Mashallah Rezakazemi
- Faculty of Chemical and Materials Engineering, Shahrood University of Technology, Shahrood, Iran
| | - Saeed Shirazian
- Laboratory of Computational Modeling of Drugs, South Ural State University, 76 Lenin prospekt, 454080, Chelyabinsk, Russia
| |
Collapse
|
21
|
Prediction of turbulence eddy dissipation of water flow in a heated metal foam tube. Sci Rep 2020; 10:19280. [PMID: 33159145 PMCID: PMC7648062 DOI: 10.1038/s41598-020-76260-6] [Citation(s) in RCA: 23] [Impact Index Per Article: 5.8] [Reference Citation Analysis] [Abstract] [Track Full Text] [Download PDF] [Figures] [Journal Information] [Subscribe] [Scholar Register] [Received: 06/23/2020] [Accepted: 10/26/2020] [Indexed: 11/29/2022] Open
Abstract
The insertion of porous metal media inside the pipes and channels has already shown a significant heat transfer enhancement by experimental and numerical studies. Porous media could make a mixing flow and small-scale eddies. Therefore, the turbulence parameters are attractive in such cases. The computational fluid dynamics (CFD) approach can predict the turbulence parameters using the turbulence models. However, the CFD is unable to find the relation of the turbulence parameters to the boundary conditions. The artificial intelligence (AI) has shown potential in combination with the CFD to build high-performance predictive models. This study is aimed to establish a new AI algorithm to capture the patterns of the CFD results by changing the system’s boundary conditions. The ant colony optimization-based fuzzy inference system (ACOFIS) method is used for the first time to reduce time and computational effort needed in the CFD simulation. This investigation is done on turbulent forced convection of water through an aluminum metal foam tube under constant wall heat flux. The ANSYS-FLUENT CFD software is used for the simulations. The x and y of the fluid nodal locations, inlet temperature, velocity, and turbulent kinetic energy (TKE) are the inputs of the ACOFIS to predict turbulence eddy dissipation (TED) as the output. The results revealed that for the best intelligence of the ACOFIS, the number of inputs, the number of ants, the number of membership functions (MFs) and the rule are 5, 10, 93 and 93, respectively. Further comparison is made with the adaptive network-based fuzzy inference system (ANFIS). The coefficient of determination for both methods was close to 1. The ANFIS showed more learning and prediction times (785 s and 10 s, respectively) than the ACOFIS (556 s and 3 s, respectively). Finding the member function versus the inputs, the value of TED is calculated without the CFD modeling. So, solving the complicated equations by the CFD is replaced with a simple correlation.
Collapse
|
22
|
Babanezhad M, Taghvaie Nakhjiri A, Rezakazemi M, Marjani A, Shirazian S. Functional input and membership characteristics in the accuracy of machine learning approach for estimation of multiphase flow. Sci Rep 2020; 10:17793. [PMID: 33082441 PMCID: PMC7575550 DOI: 10.1038/s41598-020-74858-4] [Citation(s) in RCA: 17] [Impact Index Per Article: 4.3] [Reference Citation Analysis] [Abstract] [Track Full Text] [Download PDF] [Figures] [Journal Information] [Subscribe] [Scholar Register] [Received: 06/27/2020] [Accepted: 10/08/2020] [Indexed: 11/19/2022] Open
Abstract
In the current study, Artificial Intelligence (AI) approach was used for the learning of a physical system. We applied four inputs and one output in the learning process of AI. In the learning process, the inputs are space locations of a BCR (bubble column reactor), which are x, y, and z coordinate as well as the amount of gas fraction in BCR. The liquid velocity is also considered as output. A variety of functions were used in learning, such as gbellmf and gaussmf functions, to examine which functions can give the best learning. At the end of the study, all of the results were compared to CFD (computational fluid dynamics). A three-dimensional (3D) BCR was used in this research, and we studied simulation by CFD as well as AI. The data from CFD in a 3D BCR was studied in the AI domain. In AI, we tuned for various parameters to achieve the best intelligence in the system. For instance, different inputs, different membership functions, different numbers of membership functions were used in the learning process. Moreover, the meshless prediction was used, meaning that some data in the BCR have not participated in the learning, and they were predicted in the prediction process, which gives us a special capability to compare the results with the CFD outcomes. The findings showed us that AI can predict the CFD results, and a great agreement was achieved between CFD computing nodes and AI elements. This novel methodology can suggest a meshless and multifunctional AI model to simulate the turbulence flow in the BCR. For further evaluation, the ANFIS method is compared with ACOFIS and PSOFIS methods with regards to model’s accuracy. The results show that ANFIS method contains higher accuracy and prediction capability compared with ACOFIS and PSOFIS methods.
Collapse
Affiliation(s)
- Meisam Babanezhad
- Institute of Research and Development, Duy Tan University, Da Nang, 550000, Vietnam.,Faculty of Electrical - Electronic Engineering, Duy Tan University, Da Nang, 550000, Vietnam
| | - Ali Taghvaie Nakhjiri
- Department of Petroleum and Chemical Engineering, Science and Research Branch, Islamic Azad University, Tehran, Iran
| | - Mashallah Rezakazemi
- Faculty of Chemical and Materials Engineering, Shahrood University of Technology, Shahrood, Iran
| | - Azam Marjani
- Department for Management of Science and Technology Development, Ton Duc Thang University, Ho Chi Minh City, Vietnam. .,Faculty of Applied Sciences, Ton Duc Thang University, Ho Chi Minh City, Vietnam.
| | - Saeed Shirazian
- Department of Chemical Sciences, Bernal Institute, University of Limerick, Limerick, Ireland.,Laboratory of Computational Modeling of Drugs, South Ural State University, 76 Lenin Prospekt, Chelyabinsk, Russia, 454080
| |
Collapse
|
23
|
Babanezhad M, Nakhjiri AT, Marjani A, Shirazian S. gbell Learning function along with Fuzzy Mechanism in Prediction of Two-Phase Flow. ACS OMEGA 2020; 5:25882-25890. [PMID: 33073113 PMCID: PMC7557937 DOI: 10.1021/acsomega.0c03225] [Citation(s) in RCA: 6] [Impact Index Per Article: 1.5] [Reference Citation Analysis] [Abstract] [Track Full Text] [Figures] [Subscribe] [Scholar Register] [Received: 07/04/2020] [Accepted: 09/18/2020] [Indexed: 06/11/2023]
Abstract
The integration of the computational fluid dynamics (CFD) and the adaptive network-based fuzzy inference system, known as ANFIS, is investigated for simulating the hydrodynamic in a bubble column reactor. The Eulerian-Eulerian two-phase model is employed as the CFD approach. For the ANFIS technique, a sensitivity analysis is done by varying the number of inputs and the number of membership functions (MFs). The x and z coordinates of the fluid location, the air velocity, and the pressure are considered as the inputs of the ANFIS, while the air vorticity is the output. The results revealed that the ANFIS with all four inputs and the MFs of five achieved the highest intelligence with the regression number close to 1. More specifically, gbell function in the learning framework is used to train all local computing nodes from solving Navier-Stokes equations. In the decision or prediction part, the fuzzy mechanism is used for the prediction of extra nodes that solve, which Navier-Stokes equations did not solve. The results show that the gbell function enables us to fully train all numerical points and also store data set in the frame of mathematical equations. Besides, this function responds well with the number of inputs and MFs for accurate prediction of reactor hydrodynamics. Additionally, a high number of MFs and input parameters influence the accuracy of the method during prediction. In the current study, gbell MF was studied to investigate its accuracy in the prediction of the two-phase flow. Also, different numbers of MFs were considered to investigate the level of accuracy and capability of prediction. ANFIS clustering methods, grid partition and fuzzy C-mean (FCM) clustering, are compared to see the ability of the method in prediction. To compare the accuracy of the ANFIS method with FCM clustering, the data were compared to the gaussmf function. The results showed that the method has high accuracy and that it could predict the flow pattern.
Collapse
Affiliation(s)
- Meisam Babanezhad
- Institute
of Research and Development, Duy Tan University, Da Nang 550000, Vietnam
- Faculty
of Electrical—Electronic Engineering, Duy Tan University, Da Nang 550000, Vietnam
| | - Ali Taghvaie Nakhjiri
- Department
of Petroleum and Chemical Engineering, Science and Research Branch, Islamic Azad University, Tehran 1477893855, Iran
| | - Azam Marjani
- Department
for Management of Science and Technology Development, Ton Duc Thang University, Ho Chi
Minh City , Viet Nam
- Faculty
of Applied Sciences, Ton Duc Thang University, Ho Chi Minh City 758307, Viet Nam
| | - Saeed Shirazian
- Department
of Chemical Sciences, Bernal Institute, University of Limerick, Limerick V94 T9PX, Ireland
- Laboratory
of Computational Modeling of Drugs, South
Ural State University, 76 Lenin prospekt, 454080 Chelyabinsk, Russia
| |
Collapse
|
24
|
Babanezhad M, Nakhjiri AT, Marjani A, Shirazian S. Pattern recognition of the fluid flow in a 3D domain by combination of Lattice Boltzmann and ANFIS methods. Sci Rep 2020; 10:15908. [PMID: 32985599 PMCID: PMC7522723 DOI: 10.1038/s41598-020-72926-3] [Citation(s) in RCA: 20] [Impact Index Per Article: 5.0] [Reference Citation Analysis] [Abstract] [Track Full Text] [Download PDF] [Figures] [Journal Information] [Subscribe] [Scholar Register] [Received: 06/09/2020] [Accepted: 09/09/2020] [Indexed: 11/15/2022] Open
Abstract
Many numerical methods have been used to simulate the fluid flow pattern in different industrial devices. However, they are limited with modeling of complex geometries, numerical stability and expensive computational time for computing, and large hard drive. The evolution of artificial intelligence (AI) methods in learning large datasets with massive inputs and outputs of CFD results enables us to present completely artificial CFD results without existing numerical method problems. As AI methods can not feel barriers in numerical methods, they can be used as an assistance tool beside numerical methods to predict the process in complex geometries and unstable numerical regions within the short computational time. In this study, we use an adaptive neuro-fuzzy inference system (ANFIS) in the prediction of fluid flow pattern recognition in the 3D cavity. This prediction overview can reduce the computational time for visualization of fluid in the 3D domain. The method of ANFIS is used to predict the flow in the cavity and illustrates some artificial cavities for a different time. This method is also compared with the genetic algorithm fuzzy inference system (GAFIS) method for the assessment of numerical accuracy and prediction capability. The result shows that the ANFIS method is very successful in the estimation of flow compared with the GAFIS method. However, the GAFIS can provide faster training and prediction platform compared with the ANFIS method.
Collapse
Affiliation(s)
- Meisam Babanezhad
- Institute of Research and Development, Duy Tan University, Da Nang, 550000, Vietnam.,Faculty of Electrical - Electronic Engineering, Duy Tan University, Da Nang, 550000, Vietnam
| | - Ali Taghvaie Nakhjiri
- Department of Petroleum and Chemical Engineering, Science and Research Branch, Islamic Azad University, Tehran, Iran
| | - Azam Marjani
- Department for Management of Science and Technology Development, Ton Duc Thang University, Ho Chi Minh City, Vietnam. .,Faculty of Applied Sciences, Ton Duc Thang University, Ho Chi Minh City, Vietnam.
| | - Saeed Shirazian
- Department of Chemical Sciences, Bernal Institute, University of Limerick, Limerick, Ireland.,Laboratory of Computational Modeling of Drugs, South Ural State University, 76 Lenin Prospekt, Chelyabinsk, Russia, 454080
| |
Collapse
|