Suspended multiwalled, acid-functionalized carbon nanotubes promote aggregation of the opportunistic pathogen Pseudomonas aeruginosa

Less is more: A new strategy combining nanomaterials and PGPB to promote plant growth and phytoremediation in contaminated soil

Novel combination strategies of nanomaterials (NMs) and plant growth-promoting bacteria (PGPB) may facilitate soil remediation and plant growth. However, the efficiency of the NM-PGPB combination and interactions among NMs, PGPB, and plants are still largely unknown. We used multiwalled carbon nanotubes (MWCNTs) and zero-valent iron (nZVI) combined with Bacillus sp. PGP5 to enhance the phytoremediation efficiency of Solanum nigrum on heavy metal (HM)-contaminated soil. The NM-PGPB combination showed the best promoting effect on plant growth, which also had synergistic effects on the bioaccumulation of HMs in S. nigrum. The MWCNT-PGP5 combination increased the Cd, Pb, and Zn removal efficiency of S. nigrum by 62.03%, 69.44%, and 61.31%, respectively. The underlining causes of improved plant growth and phytoremediation by NMs-PGPB combination were further elucidated. NM application promoted PGPB survival in soil. Compared with each single application, the combined application minimized disturbance to plant transcription levels and rhizosphere microbial community, resulting in the best performance on soil remediation and plant growth. The NM-PGPB-induced changes in the microbial community and root gene expression were necessary for plant growth promotion. This work reveals the "less is more" advantage of the NM-PGPB combination in soil remediation, providing a new strategy for soil management.

Antibacterial Effect of Carbon Nanomaterials: Nanotubes, Carbon Nanofibers, Nanodiamonds, and Onion-like Carbon

The increasing resistance of bacteria and fungi to antibiotics is one of the health threats facing humanity. Of great importance is the development of new antibacterial agents or alternative approaches to reduce bacterial resistance to available antibacterial drugs. Due to the complexity of their properties, carbon nanomaterials (CNMs) may be of interest for a number of biomedical applications. One of the problems in studying the action of CNMs on microorganisms is the lack of universally standardized methods and criteria for assessing antibacterial and antifungal activity. In this work, using a unified methodology, a comparative study of the antimicrobial properties of the CNM systemic kit against common opportunistic microorganisms, namely Escherichia coli and Staphylococcus aureus, was carried out. Multiwalled carbon nanotubes (MWNTs), catalytic filamentous carbon with different orientations of graphene blocks (coaxial-conical and stacked, CFC), ionic carbon (OLC), and ultrafine explosive nanodiamonds (NDs) were used as a system set of CNMs. The highest antimicrobial activity was shown by NDs, both types of CFCs, and carboxylated hydrophilic MWCNTs. The SEM results point out the difference between the mechanisms of action of UDD and CFC nanotubes.

How multi-walled carbon nanotubes in wastewater influence the fate of coexisting antibiotic resistant genes in the subsequent disinfection process

Wastewater treatment plants (WWTPs) are important hubs for the spread of antibiotic resistance genes (ARGs). Engineered nanoparticles, which was inevitably released to WWTPs, could change environmentally sensitive of antibiotic resistant bacteria (ARB). This would influence the fate of ARGs in subsequent disinfection process and consequent health risk. In this study, the ARGs fate of the effluent in conventional sodium hypochlorite (NaClO) disinfection process was investigated as multi-walled carbon nanotubes (MWCNTs) existed in sequencing batch reactor (SBR). The results showed the existence of MWCNTs in SBR could enhance the removal efficiency of intracellular 16S rRNA gene and intI1, extracellular intI1, sul2 and tetX in the effluent by NaClO. This is mainly due to the variation of bacterial physiological status, bacterial population structure and the activation of NaClO under the role of MWCNTs. MWCNTs in SBR could increase in membrane permeability of bacterial cells, which would be conducive to the penetration of chlorination to cytoplasm. MWCNTs in SBR also could change the bacterial population structure and induce the chlorine-sensitive bacteria; thus the potential hosts of ARGs in the effluent would be more easily inactivated by NaClO. Moreover, the residual MWCNTs in the effluent could activate NaClO to generate various free radical, which would enhance the oxidizing capacity of chlorination.

Engineering plants with carbon nanotubes: a sustainable agriculture approach

Sustainable agriculture is an important conception to meet the growing food demand of the global population. The increased need for adequate and safe food, as well as the ongoing ecological destruction associated with conventional agriculture practices are key global challenges. Nanomaterials are being developed in the agriculture sector to improve the growth and protection of crops. Among the various engineered nanomaterials, carbon nanotubes (CNTs) are one of the most promising carbon-based nanomaterials owing to their attractive physiochemical properties such as small size, high surface area, and superior mechanical and thermal strength, offering better opportunities for agriculture sector applications. This review provides basic information about CNTs, including their history; classification; and electrical, thermal, and mechanical properties, with a focus on their applications in the agriculture field. Furthermore, the mechanisms of the uptake and translocation of CNTs in plants and their defense mechanisms against environmental stresses are discussed. Finally, the major shortcomings, threats, and challenges of CNTs are assessed to provide a broad and clear view of the potential and future directions for CNT-based agriculture applications to achieve the goal of sustainability.

Multiwalled Carbon Nanotubes Promote Bacterial Conjugative Plasmid Transfer

Multiwalled carbon nanotubes (MWCNTs) regularly enter aquatic environments due to their ubiquity in consumer products and engineering applications. However, the effects of MWCNT pollution on the environmental microbiome are poorly understood. Here, we evaluated whether these carbon nanoparticles can elevate the spread of antimicrobial resistance by promoting bacterial plasmid transfer, which has previously been observed for copper nanomaterials with antimicrobial properties as well as for microplastics. Through a combination of experimental liquid mating assays between Pseudomonas putida donor and recipient strains with plasmid pKJK5::gfpmut3b and mathematical modeling, we here demonstrate that the presence of MWCNTs leads to increased plasmid transfer rates in a concentration-dependent manner. The percentage of transconjugants per recipient significantly increased from 0.21 ± 0.04% in absence to 0.41 ± 0.09% at 10 mg L-1 MWCNTs. Similar trends were observed when using an Escherichia coli donor hosting plasmid pB10. The identified mechanism underlying the observed dynamics was the agglomeration of MWCNTs. A significantly increased number of particles with >6 μm diameter was detected in the presence of MWCNTs, which can in turn provide novel surfaces for bacterial interactions between donor and recipient cells after colonization. Fluorescence microscopy confirmed that MWCNT agglomerates were indeed covered in biofilms that contained donor bacteria as well as elevated numbers of green fluorescent transconjugant cells containing the plasmid. Consequently, MWCNTs provide bacteria with novel surfaces for intense cell-to-cell interactions in biofilms and can promote bacterial plasmid transfer, hence potentially elevating the spread of antimicrobial resistance. IMPORTANCE In recent decades, the use of carbon nanoparticles, especially multiwalled carbon nanotubes (MWCNTs), in a variety of products and engineering applications has been growing exponentially. As a result, MWCNT pollution into environmental compartments has been increasing. We here demonstrate that the exposure to MWCNTs can affect bacterial plasmid transfer rates in aquatic environments, an important process connected to the spread of antimicrobial resistance genes in microbial communities. This is mechanistically explained by the ability of MWCNTs to form bigger agglomerates, hence providing novel surfaces for bacterial interactions. Consequently, increasing pollution with MWCNTs has the potential to elevate the ongoing spread of antimicrobial resistance, a major threat to human health in the 21st century.

The influence of nanomaterials on pyocyanin production by Pseudomonas aeruginosa

Pseudomonas aeruginosa is a bacterium producing industrially utile metabolites, such as rhamnolipids, biopolymers, and pigments. Pyocyanin, the most studied example of pigments, is a virulence factor that also shows the potential for application in, e.g., agriculture, anticancer therapy, and energy production. Therefore, potential inhibitors and stimulants of pyocyanin production by P. aeruginosa should be studied, and nanomaterials may cause both effects. The study aimed to examine the influence of zinc oxide and multi-walled carbon nanotubes (pristine or dispersed with alginic acid) on pyocyanin production by P. aeruginosa. First, the influence of different concentrations of nanomaterials (500.00–0.06 µg/mL) on culture optical density and biofilm formation was studied. These results helped select concentrations for further tests, i.e., growth curves and fluorescence measurements. Pyocyanin production was assessed by the chloroform–hydrochloric acid method. SEM analysis was conducted to assess the influence of nanomaterials on the cell's integrity and biofilm structure. Pristine multi-walled carbon nanotubes exhibited a stimulative effect on pigment production when applied in high concentrations (500.00 µg/mL), while dispersed material enhanced the production in lowered dosages (125.00 µg/mL). On the other hand, high concentrations of zinc oxide inhibited pyocyanin production, while minor increased bioproduct production. The research indicates the potential to use nanomaterials as the modulators of pyocyanin production and other metabolites.