Stability of misoprostol tablets collected in Malawi and Rwanda: Importance of intact primary packaging

Development and validation of a stability-indicating method, structural elucidation of new degradation products from misoprostol by LC-MS time-of-flight, and an ex vivo study of vaginal permeation

Misoprostol (MSP) is commonly prescribed in obstetrics and gynecology clinical practice for labor induction, cervical ripening, first-trimester pregnancy termination, and the treatment of postpartum hemorrhage. Furthermore, there is a lack of comprehensive discussion evaluating how different commercially available formulations influence the overall efficacy of MSP, even though reports indicate issues with the quality of these formulations, particularly regarding stability and vaginal absorption processes. This study investigates the stability of MSP under acidic conditions and its in vitro permeation using swine vaginal mucosa. A forced degradation study was conducted using 0.2 M HCl, and a high-efficiency LC method was developed. Three degradation products were identified and characterized using electrospray ionization-high-resolution quadrupole-time-of-flight-MS, with respective m/z values of 391.2508, 405.2705, and 387.2259, respectively. These results suggest that the degradation mechanism involves dehydration of the β-hydroxy ketone moiety, followed by isomerization to its most resonance-stable form and de-esterification. Finally, the in vitro permeation study revealed that the esterified form of MSP was unable to permeate the mucosa and required prior degradation for any component to be detected in the receptor fluid.

Investigating the prilling/vibration technique to produce gastric-directed drug delivery systems for misoprostol

Prilling/vibration technique to produce oral microcapsules was explored to achieve local delivery of misoprostol (MIS), a prostaglandin E1 analogue indicated for the treatment of gastric-duodenal ulcers, at the gastric mucosa. To improve MIS chemical stability and reduce its associated systemic side effects, drug delivery systems were designed and developed as microcapsules consisting of a core of sunflower oil and MIS (Fs6 and Fs14) or a MIS complex with hydroxypropyl-beta-cyclodextrin (HP-β-CD) (Fs18), confirmed by specific studies, and a polymeric shell. The produced microcapsules showed high encapsulation efficiencies for those with MIS solubilized in sunflower oil (>59.86 %) and for the microcapsules with MIS/HP-β-CD (97.61 %). To demonstrate the ability of these systems to deliver MIS into the stomach, swelling and drug release experiments were also conducted in simulated gastric fluid. Among the three formulations, FS18 showed gastric release within 30 min and was the most advantageous formulation because the presence of the MIS/HP-β-CD inclusion complex ensured a greater ability to stabilise MIS in the simulated gastric environment. In addition, these new systems have a small size (<540 µm), and good flow properties and the dose of the drug could be easily adapted using different amounts of microcapsules (flexibility), making them a passepartout for different age population groups.

The efficacy and safety of 25 μg or 50 μg oral misoprostol versus 25 μg vaginal misoprostol given at 4- or 6-hourly intervals for induction of labour in women at or beyond term with live singleton pregnancies: A systematic review and meta-analysis

BACKGROUND

Misoprostol is widely used for cervical ripening and labour induction as it is heat-stable and inexpensive. Oral misoprostol 25 μg given 2-hourly is recommended over vaginal misoprostol 25 μg given 6-hourly, but the need for 2-hourly fetal monitoring makes oral misoprostol impractical for routine use in high-volume obstetric units in resource-constrained settings.

OBJECTIVES

To compare the efficacy and safety of oral misoprostol initiated at 25 or 50 μg versus 25 μg vaginal misoprostol given at 4- to 6-hourly intervals for labor induction in women at or beyond term (≥ 37 weeks) with a single viable fetus and an unscarred uterus.

SEARCH STRATEGY

We identified eligible randomized, parallel-group, labor-induction trials from recent systematic reviews. We additionally searched PubMed, Cochrane CENTRAL, Epistemonikos, and clinical trials registries from February 1, 2020 to December 31, 2022 without language restrictions. Database-specific keywords for cervical priming, labor induction, and misoprostol were used.

SELECTION CRITERIA

We excluded labor-induction trials exclusively in women with ruptured membranes, in the third trimester, and those that initiated misoprostol at doses not specified in the review's objectives. The primary outcomes were vaginal birth within 24 h, cesarean section, perinatal mortality, neonatal morbidity, and maternal morbidity. The secondary outcomes were uterine hyperstimulation with fetal heart rate changes, and oxytocin augmentation.

DATA COLLECTION AND ANALYSIS

Two or more authors selected studies independently, assessed risk of bias, and extracted data. We derived pooled weighted risk ratios with 95% confidence intervals (CIs) for each outcome, subgrouping trials by the dose and frequency of misoprostol regimens. We used the I2 statistic to quantify heterogeneity and the random-effects model for meta-analysis when appropriate. We used the Grades of Recommendation, Assessment, Development and Evaluation (GRADE) approach to assess certainty (confidence) in the effect estimates.

MAIN RESULTS

Thirteen trials, from Canada, India, Iran, and the US, randomizing 2941 women at ≥37 weeks of gestation with an unfavorable cervix (Bishop score <6), met the eligibility criteria. Five misoprostol regimens were compared: 25 μg oral versus 25 μg vaginal, 4-hourly (three trials); 50 μg oral versus 25 μg vaginal, 4-hourly (five trials); 50 μg followed by 100 μg oral versus 25 μg vaginal, 4-hourly (two trials); 50 μg oral, 4-hourly versus 25 μg vaginal, 6-hourly (one trial); and 50 μg oral versus 25 μg vaginal, 6-hourly (two trials). The overall certainty in the evidence ranged from moderate to very low, due to high risk of bias in 11/13 trials (affecting all outcomes), unexplained heterogeneity (1/7 outcomes), indirectness (1/7 outcomes), and imprecision (4/7 outcomes). Vaginal misoprostol probably increased vaginal deliveries within 24 h compared with oral misoprostol (risk ratio [RR] 0.82, 95% CI 0.70-0.96; 11 trials, 2721 mothers; moderate-certainty evidence); this was more likely with 4-hourly than with 6-hourly vaginal regimens. The risk of cesarean sections did not appreciably differ (RR 1.00, 95% CI 0.80-1.26; 13 trials, 2941 mothers; very low-certainty evidence), although oral misoprostol 25 μg 4-hourly probably increased this risk compared with 25 μg vaginal misoprostol 4-hourly (RR 1.69, 95% CI 1.21-2.36; three trials, 515 mothers). The risk of perinatal mortality (RR 0.67, 95% CI 0.11-3.90; one trial, 196 participants; very low-certainty evidence), neonatal morbidity (RR 0.84, 95% CI 0.67-1.06; 13 trials, 2941 mothers; low-certainty evidence), and maternal morbidity (RR 0.83, 95% CI 0.48-1.44; 6 trials; 1945 mothers; moderate-certainty evidence) did not differ appreciably. The risk of uterine hyperstimulation with fetal heart rate changes may be lower with oral misoprostol (RR 0.70, 95% CI 0.52-0.95; 10 trials, 2565 mothers; low-certainty evidence). Oxytocin augmentation was probably more frequent with oral compared with vaginal misoprostol (RR 1.29, 95% CI 1.10-1.51; 13 trials, 2941 mothers; moderate-certainty evidence).

CONCLUSIONS

Low-dose, 4- to 6-hourly vaginal misoprostol regimens probably result in more vaginal births within 24 h and less frequent oxytocin use compared with low-dose, 4- to 6-hourly, oral misoprostol regimens. Vaginal misoprostol may increase the risk of uterine hyperstimulation with fetal heart changes compared with oral misoprostol, without increasing the risk of perinatal mortality, neonatal morbidity, or maternal morbidity. Indirect evidence indicates that 25 μg vaginal misoprostol 4-hourly may be more effective and as safe as the recommended 6-hourly vaginal regimen. This evidence could inform clinical decisions in high-volume obstetric units in resource-constrained settings.

Novel Hydrolytic Degradable Crosslinked Interpenetrating Polymeric Networks (IPNs): An Efficient Hybrid System to Manage the Controlled Release and Degradation of Misoprostol

PURPOSE

The goal of this study was to make pH-sensitive HPMC/Neocel C19-based interpenetrating polymeric networks (IPNs) that could be used to treat different diseases. An assembled novel carrier system was demonstrated in this study to achieve multiple functions such as drug protection and self-regulated release.

METHODS

Misoprostol (MPT) was incorporated as a model drug in hydroxyl-propyl-methylcellulose (HPMC)- and Neocel C19-based IPNs for controlled release. HPMC- and Neocel C19-based IPNs were fabricated through an aqueous polymerization method by utilizing the polymers HPMC and Neocel C19, the initiator ammonium peroxodisulfate (APS), the crosslinker methylenebisacrylamide (MBA), and the monomer methacrylic acid (MAA). An IPN based on these materials was created using an aqueous polymerization technique. Samples of IPN were analyzed using scanning electron microscopy (SEM), atomic force microscopy (AFM), differential scanning calorimetry (DSC), thermal analysis (TGA), and powder X-ray diffraction (PXRD). The effects of the pH levels 1.2 and 7.4 on these polymeric networks were also studied in vitro and through swelling experiments. We also performed in vivo studies on rabbits using commercial tablets and hydrogels.

RESULTS

The thermal stability measured using TGA and DSC for the revised formulation was higher than that of the individual components. Crystallinity was low and amorphousness was high in the polymeric networks, as revealed using powder X-ray diffraction (PXRD). The results from the SEM analysis demonstrated that the surface of the polymeric networks is uneven and porous. Better swelling and in vitro results were achieved at a high pH (7.4), which endorses the pH-responsive characteristics of IPN. Drug release was also increased in 7.4 pH (80% in hours). The pharmacokinetic properties of the drugs showed improvement in our work with hydrogel. The tablet MRT was 13.17 h, which was decreased in the hydrogels, and its AUC was increased from 314.41 ng h/mL to 400.50 ng h/mL in hydrogels. The blood compatibility of the IPN hydrogel was measured using different weights (100 mg, 200 mg, 400 mg, and 600 mg; 5.34%, 12.51%, 20.23%, and 29.37%, respectively).

CONCLUSIONS

As a result, IPN composed of HPMC and Neocel C19 was successfully synthesized, and it is now possible to use it for the controlled release of MPT.

Burden of and factors associated with poor quality antibiotic, antimalarial, antihypertensive and antidiabetic medicines in Malawi

OBJECTIVE

To assess the prevalence and factors associated with substandard and falsified (SF) medicines among antibiotic, antimalarial, antihypertensive and antidiabetic medicines in Malawi.

METHODS

We conducted a cross-sectional study in 23 public, faith-based and private health facilities in Zomba, Machinga and Nsanje districts. We analyzed oral medicine samples of commonly used medicines among antibiotics, antimalarial, antihypertensive and antidiabetics in accordance with Malawi Essential Medicines List and local treatment guidelines. These medicines were subjected to visual inspection for any defects and screening for the content of active pharmaceutical ingredient and disintegration of dosage units. Samples that failed during screening and at least 10% of those that passed were subjected to pharmacopeia assay and dissolution test for confirmation. We used thin layer chromatography and disintegration test methods provided in the Global Pharma Health Fund minilab® for the screening purposes. We conducted confirmatory test using High-Performance Liquid Chromatography (HPLC) or ultra-violet/visible spectrophotometer and dissolution.

RESULTS

Of the 293 medicine samples collected, 14.3% were SF medicines. Among the SF medicines were 12.5% of Amlodipine (1/8), 19.2% of Amoxicillin (5/26), 72.2% of Atenolol (8/11), 21.2% of Ciprofloxacin (7/33), 14.3% of Enalapril (1/7), 44.4% of Flucloxacillin (4/9), and 35.7% of sulfadoxine/ pyrimethamine (10/28). Medicine quality was associated with therapeutic medicine class, stated origin of manufacturer, primary packaging material and geographical location. Antimalarial and antidiabetic medicines were of better quality as compared to antibiotics, odds ratio OR 4.2 (95% CI 1.7-9.49), p < 0.002 and OR 5.6 (95% CI 1.21-26.09), p < 0.028 respectively. In terms of stated country of origin, the prevalence of SF medicines was 30% (15/50), 33% (9/27), 26.7% (4/15) and 6.6% (8/122) for medicines stated to be manufactured in Malawi, China, Kenya and India respectively.

CONCLUSION

This study presents the first findings on the assessment of quality of medicines since the establishment of the national pharmacovigilance center in 2019 in Malawi. It is revealed that the problem of SF medicines is not improving and hence the need for further strengthening of quality assurance systems in Malawi.