Solid lipid-based nanoparticulate system for sustained release and enhanced in-vitro cytotoxic effect of 5-fluorouracil on skin Melanoma and squamous cell carcinoma

Lipid-based nanosystems for wound healing

INTRODUCTION

Wounds, resulting from traumas, surgery, burns or diabetes, are important medical problems due to the complexity of wound healing process regarding healing times and healthcare costs. Nanosystems have emerged as promising candidates in this field thank to their properties and versatile applications in drugs delivery.

AREAS COVERED

Lipid-based nanosystems (LBN) are described for wound treatment, highlighting their different behaviors when interacting with the cutaneous tissue. The role of nanosystems in delivering mostly natural compounds on skin as well as the technological and engineering strategies to increase their efficiency in wound healing effect are reviewed. Finally, in vitro, ex-vivo and in vivo studies are reported.

EXPERT OPINION

LBN have shown promise in addressing the challenges of wound healing as they can improve the stability of drugs used in wound therapy, leading to higher efficacy and fewer adverse effects as compared to traditional formulations. LBNs being involved in the inflammatory and proliferation stages of the wound healing process, enable the modification of wound healing through multiple ways. In addition, the use of new technologies, including 3D bioprinting and photobiomodulation, may lead to potential breakthroughs in wound healing. This would provide clinicians with more potent forms of therapy for wound healing.

Enhanced Skin Penetration and Efficacy: First and Second Generation Lipoidal Nanocarriers in Skin Cancer Therapy

Skin carcinoma remains one of the most widespread forms of cancer, and its global impact continues to increase. Basal cell carcinoma, melanoma, and squamous cell carcinoma are three kinds of cutaneous carcinomas depending upon occurrence and severity. The invasive nature of skin cancer, the limited effectiveness of current therapy techniques, and constraints to efficient systems for drug delivery are difficulties linked with the treatment of skin carcinoma. In the present era, the delivery of drugs has found a new and exciting horizon in the realm of nanotechnology, which presents inventive solutions to the problems posed by traditional therapeutic procedures for skin cancer management. Lipid-based nanocarriers like solid lipid nanoparticles and nanostructured lipid carriers have attracted a substantial focus in recent years owing to their capability to improve the drug's site-specific delivery, enhancing systemic availability, and thus its effectiveness. Due to their distinct structural and functional characteristics, these nanocarriers can deliver a range of medications, such as peptides, nucleic acids, and chemotherapeutics, via different biological barriers, such as the skin. In this review, an effort was made to present the mechanism of lipid nanocarrier permeation via cancerous skin. In addition, recent research advances in lipid nanocarriers have also been discussed with the help of in vitro cell lines and preclinical studies. Being a nano size, their limitations and toxicity aspects in living systems have also been elaborated.

Electrochemical Characterization of the Encapsulation and Release of 5-Fluorouracil in Nanocarriers Formed from Soy Lecithin Vesicles

5-Fluorouracil (5-FU) is an antineoplastic agent known for its low bioavailability and limited cellular penetration, often resulting in adverse effects on healthy cells. Thus, finding vehicles that enhance bioavailability, enable controlled release, and mitigate adverse effects is crucial. The study focuses on encapsulating 5-FU within soy lecithin vesicles (SLVs) and assessing its impact on the carrier's properties and functionality. Results show that incorporating 5-FU does not affect SLVs' size or polydispersity, even postlyophilization. Liberation of 5-FU from SLVs requires system disruption rather than spontaneous release, with an encapsulation efficiency of approximately 43% determined using Square Wave Voltammetry. Cytotoxicity assays on colorectal cancer cells reveal SLV-based delivery's significant efficacy, surpassing free drug solution effects with 45% cell viability after 72 h vs 73% viability. The research addresses 5-FU's limited bioavailability by creating a biocompatible nanocarrier for efficient drug delivery, highlighting SLVs as promising for targeted cancer therapy due to sustained antiproliferative effects and improved cellular uptake. The study underscores the importance of tailored drug delivery systems in enhancing therapeutic outcomes and suggests SLV/5-FU formulations as a potential advancement in cancer treatment strategies.

Rheological and Injectability Evaluation of Sterilized Poloxamer-407-Based Hydrogels Containing Docetaxel-Loaded Lipid Nanoparticles

Nanostructured lipid carriers (NLCs) have the potential to increase the bioavailability and reduce the side effects of docetaxel (DTX). However, only a small fraction of nanoparticles given intravenously can reach a solid tumor. In situ-forming gels combined with nanoparticles facilitate local administration and promote drug retention at the tumor site. Injectable hydrogels based on poloxamer 407 are excellent candidates for this hybrid nanoparticle-hydrogel system because of their thermoresponsive behavior and biocompatibility. Therefore, this work aimed to develop injectable poloxamer hydrogels containing NLCs for intratumoral delivery of DTX. To ensure sterility, the obtained hydrogels were autoclaved (121 °C for 15 min) after preparation. Then, the incorporation of NLCs into the poloxamer hydrogels and the impact of steam sterilization on the nanocomposite hydrogels were evaluated concerning sol-gel transition, injectability, and physicochemical stability. All formulations were extruded through the tested syringe-needle systems with acceptable force (2.2-13.4 N) and work (49.5-317.7 N·mm) of injection. Following steam sterilization, injection became easier in most cases, and the physicochemical properties of all hydrogels remained practically unchanged according to the spectroscopical and thermal analysis. The rheological evaluation revealed that the nanocomposite hydrogels were liquid at 25 °C and underwent rapid gelation at 37 °C. However, their sterilized counterparts gelled at 1-2 °C above body temperature, suggesting that the autoclaving conditions employed had rendered these nanocomposite hydrogels unsuitable for local drug delivery.

Multi-Stimuli-Responsive Tadpole-like Polymer/Lipid Janus Microrobots for Advanced Smart Material Applications

Microrobots are of significant interest due to their smart transport capabilities, especially for precisely targeted delivery in dynamic environments (blood, cell membranes, tumor interstitial matrixes, blood-brain barrier, mucosa, and other body fluids). To perform a more complex micromanipulation in biological applications, it is highly desirable for microrobots to be stimulated with multiple stimuli rather than a single stimulus. Herein, the biodegradable and biocompatible smart micromotors with a Janus architecture consisting of PrecirolATO 5 and polycaprolactone compartments inspired by the anisotropic geometry of tadpoles and sperms are newly designed. These bioinspired micromotors combine the advantageous properties of polypyrrole nanoparticles (NPs), a high near-infrared light-absorbing agent with high photothermal conversion efficiency, and magnetic NPs, which respond to the magnetic field and exhibit multistimulus-responsive behavior. By combining both fields, we achieved an "on/off" propulsion mechanism that can enable us to overcome complex tasks and limitations in liquid environments and overcome the limitations encountered by single actuation applications. Moreover, the magnetic particles offer other functions such as removing organic pollutants via the Fenton reaction. Janus-structured motors provide a broad perspective not only for biosensing, optical detection, and on-chip separation applications but also for environmental water treatment due to the catalytic activities of multistimulus-responsive micromotors.

Nanotechnology as a Promising Method in the Treatment of Skin Cancer

The incidence of skin cancer continues to grow. There are an estimated 1.5 million new cases each year, of which nearly 350,000 are melanoma, which is often fatal. Treatment is challenging and often ineffective, with conventional chemotherapy playing a limited role in this context. These disadvantages can be overcome by the use of nanoparticles and may allow for the early detection and monitoring of neoplastic changes and determining the effectiveness of treatment. This article briefly reviews the present understanding of the characteristics of skin cancers, their epidemiology, and risk factors. It also outlines the possibilities of using nanotechnology, especially nanoparticles, for the transport of medicinal substances. Research over the previous decade on carriers of active substances indicates that drugs can be delivered more accurately to the tumor site, resulting in higher therapeutic efficacy. The article describes the application of liposomes, carbon nanotubes, metal nanoparticles, and polymer nanoparticles in existing therapies. It discusses the challenges encountered in nanoparticle therapy and the possibilities of improving their performance. Undoubtedly, the use of nanoparticles is a promising method that can help in the fight against skin cancer.

Burst Release from In Situ Forming PLGA-Based Implants: 12 Effectors and Ways of Correction

In modern pharmaceutical technology, modified-release dosage forms, such as in situ formed implants, are gaining rapidly in popularity. These dosage forms are created based on a configurable matrix consisting of phase-sensitive polymers capable of biodegradation, a hydrophilic solvent, and the active substance suspended or dissolved in it. The most used phase-sensitive implants are based on a biocompatible and biodegradable polymer, poly(DL-lactide-co-glycolide) (PLGA).

OBJECTIVE

This systematic review examines the reasons for the phenomenon of active ingredient "burst" release, which is a major drawback of PLGA-based in situ formed implants, and the likely ways to correct this phenomenon to improve the quality of in situ formed implants with a poly(DL-lactide-co-glycolide) matrix.

DATA SOURCES

Actual and relevant publications in PubMed and Google Scholar databases were studied.

STUDY SELECTION

The concept of the review was based on the theory developed during literature analysis of 12 effectors on burst release from in situ forming implants based on PLGA. Only those studies that sufficiently fully disclosed one or another component of the theory were included.

RESULTS

The analysis resulted in development of a systematic approach called the "12 Factor System", which considers various constant and variable, endogenous and exogenous factors that can influence the nature of 'burst release' of active ingredients from PLGA polymer-based in situ formed implants. These factors include matrix porosity, polymer swelling, LA:GA ratio, PLGA end groups, polymer molecular weight, active ingredient structure, polymer concentration, polymer loading with active ingredients, polymer combination, use of co-solvents, addition of excipients, and change of dissolution conditions. This review also considered different types of kinetics of active ingredient release from in situ formed implants and the possibility of using the "burst release" phenomenon to modify the active ingredient release profile at the site of application of this dosage form.

Chitosan/Solid-Lipid Nanoparticles Hybrid Gels for Vaginal Delivery of Estradiol for Management of Vaginal Menopausal Symptoms

Hormonal replacement therapy is the mainstay treatment to improve quality of life and reduce mortality. With the increasing number of young women with early menopause, women now live longer (increased life expectancy). However, poor patient compliance with oral estrogen therapy has emerged. Intravaginal estrogen therapy can provide significant benefits with minimal risk for postmenopausal women with symptoms of the lower urinary tract and vaginal area but who do not want to take oral estrogen. In this study, estradiol-loaded solid lipid nanoparticles (SLPs) were prepared from compritol ATO 888 and precirol ATO 5, and two different stabilizers (Pluronic F127 and Tween 80) were studied. Selected SLPs (F3 and F6) were coated with different concentrations of the mucoadhesive and sustained-release polymer chitosan. Furthermore, gelation time, viscosity, mucoadhesion, ex vivo permeation, and in vitro irritation for vaginal irritation were studied. Particle sizes ranged between 450-850 nm, and EE% recorded 50-83% for the six SLPs depending on the type and amount of lipids used. Cumulative % drug release was significantly enhanced and was recorded at 51% to 83%, compared to that (less than 20%) for the control suspension of estradiol. Furthermore, extensive thermal gelation and mucoadhesion were recorded for chitosan-coated SLPs. Up to 2.2-fold increases in the permeation parameters for SLPs gels compared to the control suspension gel were recorded, revealing a slight to moderate irritation on Hela cell lines. These findings demonstrated chitosan-coated estradiol SLPs as novel and promising vaginal mucoadhesive hybrid nanogels.

A pH-responsive bi-MIL-88B MOF coated with folic acid-conjugated chitosan as a promising nanocarrier for targeted drug delivery of 5-Fluorouracil

Cancer has remained one of the leading causes of death worldwide, with a lack of effective treatment. The intrinsic shortcomings of conventional therapeutics regarding tumor specificity and non-specific toxicity prompt us to look for alternative therapeutics to mitigate these limitations. In this regard, we developed multifunctional bimetallic (FeCo) bi-MIL-88B-FC MOFs modified with folic acid-conjugated chitosan (FC) as drug delivery systems (DDS) for targeted delivery of 5-Fluorouracil (5-FU). The bi-MIL-88B nanocarriers were characterized through various techniques, including powder X-ray diffraction, scanning electron microscopy, energy-dispersive X-ray, thermogravimetric analysis, and Fourier transform infrared spectroscopy. Interestingly, 5-FU@bi-MIL-88B-FC showed slower release of 5-FU due to a gated effect phenomenon endowed by FC surface coating compared to un-modified 5-FU@bi-MIL-88B. The pH-responsive drug release was observed, with 58% of the loaded 5-FU released in cancer cells mimicking pH (5.2) compared to only 24.9% released under physiological pH (5.4). The in vitro cytotoxicity and cellular internalization experiments revealed the superiority of 5-FU@bi-MIL-88B-FC as a highly potent targeted DDS against folate receptor (FR) positive SW480 cancer cells. Moreover, due to the presence of Fe and Co in the structure, bi-MIL-88B exhibited peroxidase-like activity for chemodynamic therapy. Based on the results, 5-FU@bi-MIL-88B-FC could serve as promising candidate for smart DDS by sustained drug release and selective targeting.

5-Fluorouracil-Encapsulated Films Using Exopolysaccharides from a Thermophilic Bacterium Geobacillus sp. WSUCF1 for Topical Drug Delivery

Bacteria are capable of producing a specific type of biopolymer, termed exopolysaccharides (EPSs). EPSs from thermophile Geobacillus sp. strain WSUCF1 specifically can be assembled using cost-effective lignocellulosic biomass as the primary carbon substrate in lieu of traditional sugars. 5-fluorouracil (5-FU) is an FDA-approved, versatile chemotherapeutic that has yielded high efficacy against colon, rectum, and breast cancers. The present study investigates the feasibility of a 5% 5-fluorouracil film using thermophilic exopolysaccharides as the foundation in conjunction with a simple self-forming method. The drug-loaded film formulation was seen to be highly effective against A375 human malignant melanoma at its current concentration with viability of A375 dropping to 12% after six hours of treatment. A drug release profile revealed a slight burst release before it settled into an extended and maintained release of 5-FU. These initial findings provide evidence for the versatility of thermophilic exopolysaccharides produced from lignocellulosic biomass to act as a chemotherapeutic-delivering device and expand the overall applications of extremophilic EPSs.

Polyphyllin D-Loaded Solid Lipid Nanoparticles for Breast Cancer: Synthesis, Characterization, In Vitro, and in Vivo Studies

Polyphyllin D (PD), a steroidal saponin in Paris polyphylla, induces apoptosis via the intrinsic apoptotic pathway in different cancer types. However, emerging evidence has shown that the primary issue with PD is its structure's hemolysis and cytotoxicity. This study aimed to develop and optimize PD-loaded SLN formulation and evaluate its efficacy in breast cancer cell lines. Apoptosis, as the mechanism of cell death, was confirmed by flow cytometry following Annexin V/propidium iodide staining and western blot analysis. In in vivo studies, tumor inhibitory efficacy was compared with different doses of PD-loaded SLN on 4T1-implanted BALB/c mice. The half-maximal inhibitory concentration (IC₅₀) of PD- loaded SLN was calculated to be 33.25 and 35.74 μg/mL for MCF7 and MDA-MB-231 cells, respectively. Flow cytometry analysis further confirmed a significant increase in apoptosis after treatment with PD- loaded SLN. When both cell lines were treated with PD-loaded SLN, Bcl2 and HSP70 proteins were down regulated, while Bax, Bad, P53, Apaf-1, p-p53 and Noxa proteins were upregulated. This effect was also confirmed by test performed on BALB/c mice in vivo. Based on results, PD-loaded SLN may be a promising breast cancer treatment, without recognizable side effects.