Electrical Conductivity at Surfaces of Silica Nanoparticles with Adsorbed Water at Various Relative Humidities

Surface charge density and induced currents by self-charging sliding drops

Spontaneous charge separation in drops sliding over a hydrophobized insulator surface is a well-known phenomenon and lots of efforts have been made to utilize this effect for energy harvesting. For maximizing the efficiency of such devices, a comprehensive understanding of the dewetted surface charge would be required to quantitatively predict the electric current signals, in particular for drop sequences. Here, we use a method based on mirror charge detection to locally measure the surface charge density after drops move over a hydrophobic surface. For this purpose, we position a metal electrode beneath the hydrophobic substrate to measure the capacitive current induced by the moving drop. Furthermore, we investigate drop-induced charging on different dielectric surfaces together with the surface neutralization processes. The surface neutralizes over a characteristic time, which is influenced by the substrate and the surrounding environment. We present an analytical model that describes the slide electrification using measurable parameters such as the surface charge density and its neutralization time. Understanding the model parameters and refining them will enable a targeted optimization of the efficiency in solid-liquid charge separation.

Slide electrification of drops at low velocities

Slide electrification of drops is mostly investigated on tilted plate setups. Hence, the drop charging at low sliding velocity remains unclear. We overcome the limitations by developing an electro drop friction force instrument (eDoFFI). Using eDoFFI, we investigate slide electrification at the onset of drop sliding and at low sliding velocities ≤ 1 cm s-1. The novelty of eDoFFI is the simultaneous measurements of the drop discharging current and the friction force acting on the drop. The eDoFFI tool facilitates control on drop length and width using differently shaped rings. Hereby, slide electrification experiments with the defined drop length-to-width ratios >1 and <1 are realized. We find that width of the drop is the main geometrical parameter which determines drop discharging current and charge separation. We combine Kawasaki-Furmidge friction force equation with our finding on drop discharging current. This combination facilitates the direct measurement of surface charge density (σ) deposited behind the drop. We calculate σ ≈ 45 μC m-2 on Trichloro(1H,1H,2H,2H-perfluorooctyl)silane (PFOTS) and ≈20 μC m-2 on Trichloro(octyl)silane (OTS) coated glass surfaces. We find that the charge separation by moving drops is independent of sliding velocity ≤ 1 cm s-1. The reverse sliding of drop along the same scanline facilitates calculation of the surface neutralization time constant. The eDoFFI links two scientific communities: one which focuses on the friction forces and one which focuses on the slide electrification of drops.

High Voltages in Sliding Water Drops

Water drops on insulating hydrophobic substrates can generate electric potentials of kilovolts upon sliding for a few centimeters. We show that the drop saturation voltage corresponds to an amplified value of the solid-liquid surface potential at the substrate. The amplification is given by the substrate geometry, the drop and substrate dielectric properties, and the Debye length within the liquid. Next to enabling an easy and low-cost way to measure surface- and zeta- potentials, the high drop voltages have implications for energy harvesting, droplet microfluidics, and electrostatic discharge protection.

Slide electrification: charging of surfaces by moving water drops

We investigate the charge separation caused by the motion of a water drop across a hydrophobic, insulating solid surface. Although the phenomenon of liquid charging has been consistently reported, these reports are primarily observational, results are difficult to reproduce, and no quantitative theory has been developed. In this work, we address both the experimental and theoretical sides of this problem. We reproducibly measure the charge gained by water drops sliding down a substrate, and we outline an analytical theory to describe this charging process. As an experimental system, we choose water drops moving down an inclined plane of glass hydrophobized with perfluoro octadecyltrichlorosilane (PFOTS). On this surface, sliding drops gain a positive charge. We observe charge saturation in three variables: increasing drop number, increasing interval between drops, and increasing drop-sliding length. These charge saturations indicate a limited "storage capacity" of the system, as well as a gradual discharging of the surface. To explain these results, we theorize that some fraction of the charge in the Debye layer is transferred to the surface rather than being neutralized as the drop passes. This fraction, or "transfer coefficient", is dependent on the electric potentials of surface and drop. All of our experimental charge saturation results can be interpreted based on the proposed theory. Given that nearly every surface in our lives comes in contact with water, this water-dependent surface charging may be a ubiquitous process that we can begin to understand through the proposed theory.

Conduction and Excess Charge in Silicate Glass/Air Interfaces

The glass/air interface shows electrical properties that are unexpected for a widely used electrical insulator. The mobility of interfacial charge carriers under 80% relative humidity (RH) is 4.81 × 10^-5 m² s^-1 V^-1, 3 orders of magnitude higher than the electrophoretic mobility of simple ions in water and less than 2 orders of magnitude lower than the electron mobility in copper metal. This allows the glass/air interface to reach the same potential as a biased contacting metal quickly. The interfacial surface resistance R increases by more than 5 orders of magnitude when the RH decreases from 80 to 2%, following an S-shaped curve with small hysteresis. Moreover, the biased surfaces store charge, as shown by Kelvin potential measurements. Applying an electric field parallel to the surface produces RH-dependent results: under low humidity, the interface behaves as expected for an ideal two-dimensional parallel-plate capacitor, while under high RH, it acquires and maintains excess negative charge, which is lost under low RH. The glass surface morphology and potential distribution change on the glass/air interface under high RH and applied potential, including the extensive elimination of nonglass contaminating particles and potential levelling. All these surprising results are explained by using a protonic-charge-transfer mechanism: mobile protons dissociated from silanol groups migrate rapidly along a field-oriented adsorbed water layer, while the matrix-bound silicate anions remain immobile. Glass may thus be classified as the ionic analogue of a topological insulator but based on structural features and charge-transfer mechanisms different from the chalcogenides that have been receiving great attention in the literature.