Brilliant Red HE-3B Dye Biosorption by Immobilized Residual Consortium Bacillus sp. Biomass: Fixed-Bed Column Studies

Residual biomass from various industries represents an important source of valuable compounds, used as raw materials for the production of a wide range of new products and also in various treatment and valorization processes or/and sanitation services, thus responding to the principles of sustainable development, waste recovery, and a green and circular economy. The aim of this work is to make use of residual Bacillus sp. biomass (resulting from a process of removing fatty acids from municipal wastewater) immobilized in alginate that, although it results in large quantities from biotechnological processes, is not reported to be valorized in dye biosorption processes, except in few specific applications. The biosorption potential of residual Bacillus sp. biomass in the reactive Brilliant Red HE-3B textile dye removal from aqueous systems was studied in a fixed-bed column. The effects of various experimental operating parameters, such as bed depth (h), flow rate (Fv), were investigated, and the modeling of experimental data based on Thomas and Yoon–Nelson kinetic models was satisfactorily achieved. The obtained results reconfirm that the studied residual biomass can be also considered as a good biosorbent in dynamic operating system, and can be beneficially used in the treatment of wastewater containing small quantities of organic dyes.

Production of modified sunflowers seed shells for the removal of bisphenol A

In this present study, an abundant, available lignocellulosic biomass, sunflower seed shells, SSS, was used as a precursor to prepare an effective eco-adsorbent by treatment with H2SO4. A study of the surface characteristics of raw and acid-treated SSS (ACS) has shown that the addition of H2SO4 greatly affected the physicochemical properties of the obtained eco-adsorbent, improving the BET surface area from 6.106 to 27.145 m2 g-1 and surface oxygen-rich functional groups. Batch experiments were performed to assess the removal efficiency of a phenolic compound, bisphenol A (BPA), on the adsorbents. Several parameters were evaluated and are discussed (contact time, pollutant concentration, adsorbent dosage, and pH), determining that the adsorption efficiency of BPA onto SSS was notably improved, from 20.56% to 87.81% when a sulfuric acid solution was used. Different canonical and stochastic isotherm models were evaluated to predict the experimental behaviour. A dynamic study was performed based on the models of reaction kinetics and those of mass transfer. The results showed that the adsorption kinetics of BPA obey the fractal like-kinetic model of Hill for all experimental conditions. The equilibrium data are well suited to the Hill-Sips isotherm model with a determination coefficient >0.999. The kinetic modelling also indicates that the adsorption processes of BPA onto ACS are exothermic and proceed through a physical mechanism. A mass transfer study, using simplified models, proved that the process is controlled by intraparticle and film resistances to mass transfer of the BPA.

Utilizations of agricultural waste as adsorbent for the removal of contaminants: A review

In recent years, various industrial activities have caused serious pollution to the environment. Due to the low operating costs and high flexibility, adsorption is considered as one of the most effective technologies for pollutant management. Agricultural waste has loose and porous structures, and contains functional groups such as the carboxyl group and hydroxyl group, so it can be invoked as biological adsorption material. Agricultural waste gets the advantages of a wide range of sources, low cost, and renewable. It has a good prospect for the comprehensive utilization of resources when used for environmental pollution control. This article summarized the current research status of agricultural waste in adsorbing pollutants, which pointed out the influencing factors of adsorption, expounded the adsorption mechanism of biological adsorption and introduced the related parameters of adsorption, proposed the application of adsorbents in engineering including adsorption in liquid and gas phases, at the same time it gave the future development prospect of agricultural waste as adsorbent.

Metal and polymer-mediated synthesis of porous crystalline hydroxyapatite nanocomposites for environmental remediation

This study was focused on the preparation of metal and polymer-mediated porous crystalline hydroxyapatite (HAp) nanocomposites for environmental applications. Four different nano HAp systems were synthesized, namely, microwave irradiated HAp (M1), Zn doped HAp (M2), Mg-doped HAp (M3) and sodium alginate incorporated HAp (M4), and characterized using X-ray diffraction (XRD), Fourier transform infra-red spectroscopy, scanning electron microscopy, transmission electron microscopy, atomic force microscopy, nuclear magnetic resonance (NMR), X-ray fluorescence, thermogravimetric analysis and Brunauer-Emmett-Teller (BET) analyses. Systems M1-M4 showed morphologies similar to coral shapes, polymer-like interconnected structures, sponges and feathery mycelium assemblies. Using XRD, selected area electron diffraction patterns and 1H and 31P CP/MAS solid-state NMR studies, crystallinity variation was observed from highest to lowest in the order of M4 > M1 > M3 > M2. Surface area estimates using BET isotherm reflected the highest surface area for M3, and M1 > M2 > M4. Four systems of M1-M4 were used as potential adsorbent materials for the removal of metal containing azo dye from aqueous system. Adsorption data were correlated to Freundlich and Langmuir isotherm models. According to the results, the highest capacity of 212.8 mg g-1 was exhibited by M4 having mycelium like morphology with alginate groups. This study highlights the possibility of developing HAp nanocomposites for the effective removal of dye contaminants in the environment.