Comparative Analysis of Bacterial Cellulose Membranes Synthesized by Chosen Komagataeibacter Strains and Their Application Potential

This article presents a comparative analysis of bacterial cellulose membranes synthesized by several strains of the Komagataeibacter genus in terms of their specific physical, physico-chemical, and mechanical properties. Herein, the aim was to choose the most suitable microorganisms producing cellulosic materials with the greatest potential for the fabrication of bio-inspired nanocomposites. The selection was based on three main steps, starting from the evaluation of BNC biosynthetic efficiency with and without the addition of ethanol, followed by the assessment of mechanical breaking strength, and the physical parameters (compactness, structural integrity, appearance, and thickness) of the obtained biological materials. Ultimately, based on the performed screening procedure, three efficiently growing strains (K. hansenii H3 (6Et), K. rhaeticus K4 (8Et), and Komagataeibacter sp. isolated from balsamic vinegar (12Et)) were chosen for further modifications, enabling additional cellulose functionalization. Here, supplementation of the growth medium with five representative polymeric compounds (citrus/apple pectin, wheat starch, polyvinyl alcohol, polyethylene glycol) led to significant changes in BNC properties, especially dye loading abilities, mechanical strength, and water adsorption/retention capacities. The resulting nanocomposites can be potentially useful in various fields of medicine and industry, and in the future, they may become a practical and cost-effective competitor against commercial biomaterials currently available on the market.

Highly Stretchable Bacterial Cellulose Produced by Komagataeibacter hansenii SI1

A new strain of bacteria producing cellulose was isolated from Kombucha and identified as Komagataeibacter hansenii, named SI1. In static conditions, the strain synthesises bacterial nanocellulose with an improved ability to stretch. In this study, utilisation of various carbon and nitrogen sources and the impact of initial pH was assessed in terms of bacterial nanocellulose yield and properties. K. hansenii SI1 produces cellulose efficiently in glycerol medium at pH 5.0-6.0 with a yield of 3.20-3.60 g/L. Glucose medium led to the synthesis of membrane characterised by a strain of 77%, which is a higher value than in the case of another Komagataeibacter species. Supplementation of medium with vitamin C results in an enhanced porosity and improves the ability of bacterial nanocellulose to stretch (up to 123%). The properties of modified membranes were studied by scanning electron microscopy, Fourier transform infrared spectroscopy, X-ray diffraction and mechanical tests. The results show that bacterial nanocellulose produced in SH medium and vitamin C-supplemented medium has unique properties (porosity, tensile strength and strain) without changing the chemical composition of cellulose. The method of production BNC with altered properties was the issue of Polish patent application no. P.431265.

Assessing effectiveness of Komagataeibacter strains for producing surface-microstructured cellulose via guided assembly-based biolithography

In this study, a medical device made of surface microstructured bacterial cellulose was produced using cellulose-producing acetic acid bacteria wild-type strains in combination with guided assembly-based biolithography. The medical device aims at interfering with the cell's focal adhesion establishment and maturation around implantable devices placed in soft tissues by the symmetrical array on its surface. A total of 25 Komagataeibacter strains was evaluated over a three-step selection. In the first step, the ability of strains to produce a suitable bacterial cellulose layer with high production yield was examined, then nine strains, with a uniform and smooth layer of bacterial cellulose, were cultured in a custom-made silicone bioreactor and finally the characteristics of the symmetrical array of topographic features on the surface were analysed. Selected strains showed high inter and intra species variability in bacterial cellulose production. The devices obtained by K2G30, K1G4, DSM 46590 (Komagataeibacter xylinus), K2A8 (Komagataeibacter sp.) and DSM 15973^T (Komagataeibacter sucrofermentas) strains were pouched-formed with hexagonal surface pattern required for reducing the formation of fibrotic tissue around devices, once they are implanted in soft tissues. Our findings revealed the effectiveness of the selected Komagataeibacter wild-type strains in producing surface microstructured bacterial cellulose pouches for making biomedical devices.

Glycoside hydrolase (PelAh) immobilization prevents Pseudomonas aeruginosa biofilm formation on cellulose-based wound dressing

Bacterial cellulose (BC) is recognized as a wound dressing material well-suited for chronic wounds; however, it has no intrinsic antimicrobial activity. Further, the formation of biofilms can limit the effectiveness of the pre-saturation of BC with antimicrobial agents. Here, to hinder biofilm formation by P. aeruginosa, we immobilized the hydrolytic domain of PelA (a glycohydrolase involved in the synthesis of biofilm polysaccharide Pel) on the surface of BC. The immobilization of 32.35 ± 1.05 mg PelA_h per g BC membrane resulted in an eight-fold higher P. aeruginosa cell detachment from BC membrane, indicating reduced biofilm matrix stability. Further, 1D and 2D infrared spectroscopy analysis indicated systematic reduction of polysaccharide biofilm elements, confirming the specificity of immobilized PelA_h. Importantly, BC-PelA_h was not cytotoxic towards L929 fibroblast cells. Thus, we conclude that PelA_h can be used in BC wound dressings for safe and specific protection against biofilm formation by P. aeruginosa.

Bacterial cellulose as a support for yeast immobilization - Correlation between carrier properties and process efficiency

The aim of the current study was to analyze physicochemical properties of bacterial cellulose (BC) produced by Komagataeibacter xylinus for various periods of time in stationary conditions with regard to its potential as a carrier for yeast (Saccharomyces cerevisiae and Yarrowia lipolytica) immobilization, and subsequently to correlate the relationship between these properties and the efficiency of the immobilization process. Physicochemical properties of BC, depending on the time of its biosynthesis, were as follows: surface area 7.21-11.04 m²/g, pore volume 3.11-3.96 cm³/g, pore diameter 0.011-0.109 nm, water holding capacity 32-64%, water relies capacity 10600-33400%, swelling ratio 132-389%, polymerization degree 2260-4780 and total crystallinity index 1.22-1.96 (3-30 days, respectively). The linear regression analysis showed that number of immobilized yeasts increased with values of surface area, pore size, pore diameter, swelling ratio, water release capacity and polymerization degree. The opposite trend was observed in case of water holding capacity and total crystallinity index. The analysis of physicochemical properties of BC performed in the current study have significant translational implications for understanding the relationships between BC-based carriers and the efficiency of yeast immobilization.

Immobilization pattern of morphologically different microorganisms on bacterial cellulose membranes

The aim of this study was to assess the immobilization pattern of microorganisms characterized by varying cell shapes and sizes (rod-shaped bacteria Lactobacillus delbruecki, spherical-shaped yeast Saccharomyces cerevisiae and hyphae forms of Yarrowia lipolytica) on bacterial cellulose of various material properties. The 'adsorption-incubation' method was used for the purposes of immobilization. The immobilization pattern included adsorption efficiency, ability of the immobilized cells to multiply within the carrier expressed as incubation efficiency and the degree of release of the immobilized cells from the carrier. The efficiency of adsorption and incubation was affected by the morphology of the immobilized cells and increased together with cellulose surface area. For smaller bacterial cells a higher level of loading was obtained on the same surface as compared to larger yeast cells. During incubation, the number of immobilized bacterial and yeast cells increased significantly in comparison to the number of cells adsorbed on the carrier during the adsorption step. Despite the morphological differences between the S. cerevisiae and Y. lipolytica cells, there were no statistically significant differences in the efficiency of adsorption and incubation. It was also revealed that the release ratio values obtained for L. delbruecki and S. cerevisiae increased along with cellulose surface area. Interestingly, Y. lipolytica cells in the pseudohyphae and hyphae forms penetrated deeply into the three-dimensional network of BC nanofibrils which prevented subsequent cell release. It was confirmed that carrier selection must be individually matched to the type of immobilized cells based especially on its porosity-related parameters.