Design of double Z-scheme Ag-Ag3O4/CuO-CuFe2O4 magnetic nanophotocatalyst via starch-templated microwave-combustion hybrid precipitation method and modified with corona-plasma: Remediation of dye contaminants

Herein, the novel double Z-scheme Ag-Ag3O4/CuO-CuFe2O4 magnetic nanophotocatalyst with nanosphere-on-nanosheet-like morphology was synthesized via the corona-plasma-assisted starch-templated microwave-combustion-precipitation method to remove the dye pollutants. The CuO-CuFe2O4 meso/macroporous nanophotocatalyst was synthesized using a one-pot-stage combustion-microwave process with/without starch as a hard-template. Subsequently, surface modification was carried out by DC corona-plasma discharge technology at various voltages, namely 500, 1000 and 1500 V. Then, the Ag3O4 photocatalyst was deposited on the CuO-CuFe2O4 fabricated with starch-hard-template and treated with 1000 V corona-plasma (denoted as: Ag-Ag3O4/CuO-CuFe2O4 (Starch) 1000 P). The properties of the synthesized nanophotocatalysts were analyzed using various techniques, including X-ray diffraction (XRD), Diffuse reflectance spectroscopy (DRS), Transmission electron microscopy (TEM), Field emission scanning electron microscopy (FESEM), Brunauer-Emmett-Teller and Barrett-Joyner-Halenda (BET-BJH), Vibrating Sample Manetometer (VSM), and Photoluminescence (PL). The XRD analysis corroborated the presence of CuO, CuFe2O4 and Ag3O4 in the structure of all samples. The BET-BJH analysis indicates that the specific surface area of the Ag-Ag3O4/CuO-CuFe2O4 (Starch) 1000 P nanophotocatalyst as the best sample is 2 m2/g, higher than other samples. Additionally, the DRS analysis revealed that the band gap of the Ag-Ag3O4/CuO-CuFe2O4 (Starch) 1000 P nanophotocatalyst is about 1.68 eV with the surface plasmon resonance. The performance of the ternary heterostructured Ag-Ag3O4/CuO-CuFe2O4 (Starch) 1000 P nanophotocatalyst was 96.2% and 89.1% in the degradation of the crystal violet (10 mg/L) and acid orange 7 (10 mg/L), respectively, proving its outstanding degradation capacity.

Combining non-thermal plasma technology with photocatalysis: a critical review

Due to the excellent application prospects in the fields of new energy generation and environmental remediation, photocatalysis technology has attracted the increasing attention of researchers. Although significant progress has been made in the past decades, the practical application of this technology is still restricted by the moderate catalytic efficiency. To improve the performance of catalysts, new methods are extremely required for the controllable synthesis of high-efficiency catalysts. To further comprehend the relationship between material structure and catalytic activity, the surface active sites of catalysts should be regulated at the atomic and molecular levels. As the fourth state of matter, plasma can generate diverse active species with low energy consumption. As a subset of plasmas, non-thermal plasma (NTP), defined by the great temperature difference between ions (near room temperature) and electrons (usually hotter than 2 orders of magnitude), contributes to the rapid synthesis of functional nanomaterials under relatively mild conditions. Furthermore, NTP has been widely used for the surface modification of materials. Therefore, the combination of NTP and photocatalysis is expected to provide an ideal approach to synthesize high-performance catalysts and precisely customize their surface structures, which is becoming a new direction in the field of catalysis research. This paper fundamentally reviews the progress in the combination of NTP with photocatalysis for versatile applications. Beginning with the principles of photocatalysis and plasma technology, the application of NTP for catalyst synthesis, the plasma-assisted modification of surface actives sites, and the impact of plasma-involved processes on the catalytic performance are discussed, which will provide useful insights into the performance enhancement of catalysts via plasma-assisted processes.

A review of the advances in catalyst modification using nonthermal plasma: Process, Mechanism and Applications

With the continuous development of catalytic processes in chemistry, biology, organic synthesis, energy generation and many other fields, the design of catalysts with novel properties has become a new paradigm in both science and industry. Nonthermal plasma has aroused extensive interest in the synthesis and modification of catalysts. An increasing number of researchers are using plasma for the modification of target catalysts, such as modifying the dispersion of active sites, regulating electronic properties, enhancing metal-support interactions, and changing the morphology. Plasma provides an alternative choice for catalysts in the modification process of oxidation, reduction, etching, coating, and doping and is especially helpful for unfavourable thermodynamic processes or heat-sensitive reactions. This review focuses on the following points: (i) the fundamentals behind the nonthermal plasma modification of catalysts; (ii) the latest research progress on the application of plasma modified catalysts; and (iii) main challenges in the field and a vision for future development.

Carbon Dioxide Conversion Synergistically Activated by Dielectric Barrier Discharge Plasma and the CsPbBr3@TiO2 Photocatalyst

Carbon dioxide utilization activated by the integration of plasma and photocatalyst is a promising approach to achieve the mitigation of the greenhouse effect. In this paper, for the first time, the dielectric barrier discharge (DBD) plasma and halide perovskite photocatalysts were synergistically used to facilitate the carbon dioxide conversion. After introducing the photocatalyst into the plasma reactor, the plasma discharge characteristics were improved by the photocatalyst while the active photons, electrons, and vibrationally excited molecules in plasma also enhanced the photocatalytic activity of the photocatalyst. Compared with pure CsPbBr₃ and Al₂O₃, the CsPbBr₃@TiO₂ with the best photocatalytic activity also exhibited the best performance in plasma. The carbon dioxide conversion rate of the DBD plasma filled with CsPbBr₃@TiO₂ was found to be 29.6% higher than the sum of sole plasma and photocatalysis, illustrating the achievement of the synergistic effect between the plasma and photocatalyst. This work brings up new opportunities for efficient large-scale conversion and utilization of carbon dioxide by the coupling of nonthermal plasma and photocatalysis.

Non-Thermal Plasma-Modified Ru-Sn-Ti Catalyst for Chlorinated Volatile Organic Compound Degradation

Chlorinated volatile organic compounds (CVOCs) are vital environmental concerns due to their low biodegradability and long-term persistence. Catalytic combustion technology is one of the more commonly used technologies for the treatment of CVOCs. Catalysts with high low-temperature activity, superior selectivity of non-toxic products, and resistance to chlorine poisoning are desirable. Here we adopted a plasma treatment method to synthesize a tin-doped titania loaded with ruthenium dioxide (RuO2) catalyst, possessing enhanced activity (T90%, the temperature at which 90% of dichloromethane (DCM) is decomposed, is 262 °C) compared to the catalyst prepared by the conventional calcination method. As revealed by transmission electron microscopy, X-ray diffraction, N2 adsorption, X-ray photoelectron spectroscopy, and hydrogen temperature-programmed reduction, the high surface area of the tin-doped titania catalyst and the enhanced dispersion and surface oxidation of RuO2 induced by plasma treatment were found to be the main factors determining excellent catalytic activities.