0,1,2,3D nanostructures, types of bulk nanostructured materials, and drug nanocrystals: An overview

Functional materials are required to meet the needs of society, such as environmental protection, energy storage and conversion, integrated product production, biological and medical processing. bulk nanostructured materials are a research concept that combines nanotechnology with other research fields such as supramolecular chemistry, materials science, and life science to develop logically functional materials from nanodevices. In this review article, nanostructures are synthetized by different methods based on the types and nature of the nanomaterials. In a broad sense "top-down" and "bottom-up" are the two foremost methods to synthesize nanomaterials. In top-down method bulk materials have been reduced to nanomaterials, and in case of bottom-up method, the nanomaterials are synthesized from elementary level. The different methods which are being used to synthesize nanomaterials are chemical vapor deposition method, thermal decomposition, hydrothermal synthesis, solvothermal method, pulsed laser ablation, templating method, combustion method, microwave synthesis, gas phase method, and conventional Sol-Gel method. We also briefly discuss the various physical and chemical methods for producing nanomaterials. We then discuss the applications of functional materials in many areas such as energy storage, supercapacitors, sensors, wastewater treatment, and other biological applications such as drug delivery and drug nanocrystals. Finally, future challenges in materials nanoarchitecture and concepts for further development of functional nanomaterials are briefly discussed.

Severe plastic deformation: Nanostructured materials, metal-based and polymer-based nanocomposites: A review

Significant deformation of the metal structure can be achieved without breaking or cracking the metal. There are several methods for deformation of metal plastics. The most important of these methods are angular channel pressing process, high-pressure torsion, multidirectional forging process, extrusion-cyclic compression process, cumulative climbing connection process, consecutive concreting and smoothing method, high-pressure pipe torsion. The nanocomposite is a multiphase material which the size of one of its phases is less than 100 nm in at least one dimension. Due to some unique properties, metal-based nanocomposites are widely used in engineering applications such as the automotive and aerospace industries. Polymer-based nanocomposites are two-phase systems with polymer-based and reinforcing phases (usually ceramic). These materials have a simpler synthesis process than metal-based nanocomposites and are used in a variety of applications such as the aerospace industry, gas pipelines, and sensors. Severe plastic deformation (SPD) is known to be the best method for producing bulk ultrafine grained and nanostructured materials with excellent properties. Different Severe plastic deformation methods were developed that are suitable for sheet and bulk solid materials. During the past decade, efforts have been made to create effective Severe plastic deformation processes suitable for producing cylindrical tubes. In this paper, we review Severe plastic deformation processes intended to nanostructured tubes, and their effects on material properties and severe plastic deformation is briefly introduced and its common methods for bulk materials, sheets, and pipes, as well as metal background nanocomposites, are concisely introduced and their microstructural and mechanical properties are discussed. The paper will focus on introduction of the tube Severe plastic deformation processes, and then comparison of them based on their advantages and disadvantages from the viewpoints of processing and properties.

Application of nano-antibiotics in the diagnosis and treatment of infectious diseases

Infectious diseases are the leading cause of death worldwide. Thus, nanotechnology provides an excellent opportunity to treat drug-resistant microbial infections. Numerous antibiotics have been used to inhibit the growth and kill of microbes, but the development of resistance and the emergence of side effects have severely limited the use of these agents. Due to the development of the nanotechnology, nanoparticles are widely used as antimicrobials. Silver and chitosan nanoparticles have antifungal, antiviral and antibacterial properties, and many studies confirm the antifungal properties of silver nanoparticles. Nowadays, the use of nanoparticles in the diagnosis and treatment of infectious diseases has developed due to less side effects and also the help of these particles in effective drug delivery to the target tissue. Liposomes are also used as carriers of drug delivery, genes, and modeling of cell membranes in both animals and humans. The ability of these liposomes to encapsulate large amounts of drugs, minimize unwanted side effects, high effectiveness and low toxicity has attracted the interest of researchers. This review article examines recent efforts by researchers to identify and treat infectious diseases using antimicrobial nanoparticles and drug nano-carriers.

The Effects of SiO2/Al2O3 and H2O/Al2O3 Molar Ratios on SAPO-34 Catalyst in the Methanol to Olefin Process

Informed through synthesis and characterization of NH ₃ TPD, BET techniques, the current study investigated the right contribution of silicon and water content on a 9 sample SAPO-34 catalyst with different molar ratios. The final prepared SAPO-34 catalytic performed reaction for the Methanol to olefin process was processed and reported at 410 0 C a reactor of fixed-bed. It was shown that catalysts with different SiO₂ /Al₂O₃ and H₂O/Al ₂ O ₃ ratios demonstrated high ethylene and propylene selectivity, due to their intensified crystallinity and size of crystals (1.3 to 1.7 μm). The highest degrees of ethylene and propylene selectivity for 3 samples were 50.25, 21.20, and 48.44, 19.16 respectively. Samples with ratios of different that possess high density and acute acidic sites to deactivate rapidly. The high density of acute acidic sites promoted the ultimate response to saturated hydrocarbons and aromatics based on olefins’ hydrogen transfer to and resulted in the coke generation on the top layer of the catalyst.

Conductive Gels: Properties and Applications of Nanoelectronics

Conductive gels are a special class of soft materials. They harness the 3D micro/nanostructures of gels with the electrical and optical properties of semiconductors, producing excellent novel attributes, like the formation of an intricate network of conducting micro/nanostructures that facilitates the easy movement of charge carriers. Conductive gels encompass interesting properties, like adhesion, porosity, swelling, and good mechanical properties compared to those of bulk conducting polymers. The porous structure of the gels allows the easy diffusion of ions and molecules and the swelling nature provides an effective interface between molecular chains and solution phases, whereas good mechanical properties enable their practical applications. Due to these excellent assets, conductive gels are promising candidates for applications like energy conversion and storage, sensors, medical and biodevices, actuators, superhydrophobic coatings, etc. Conductive gels offer promising applications, e.g., as soft sensors, energy storage, and wearable electronics. Hydrogels with ionic species have some potential in this area. However, they suffer from dehydration due to evaporation when exposed to the air which limits their applications and lifespan. In addition to conductive polymers and organic charge transfer complexes, there is another class of organic matter called "conductive gels" that are used in the organic nanoelectronics industry. The main features of this family of organic materials include controllable photoluminescence, use in photon upconversion technology, and storage of optical energy and its conversion into electricity. Various parameters change the electronic and optical behaviors of these materials, which can be changed by controlling some of the structural and chemical parameters of conductive gels, their electronic and optical behaviors depending on the applications. If the conjugated molecules with π bonds come together spontaneously, in a relative order, to form non-covalent bonds, they form a gel-like structure that has photoluminescence properties. The reason for this is the possibility of excitation of highest occupied molecular orbital level electrons of these molecules due to the collision of landing photons and their transfer to the lowest unoccupied molecular orbital level. This property can be used in various nanoelectronic applications such as field-effect organic transistors, organic solar cells, and sensors to detect explosives. In this paper, the general introduction of conductive or conjugated gels with π bonds is discussed and some of the physical issues surrounding electron excitation due to incident radiation and the mobility of charge carriers, the position, and role of conductive gels in each of these applications are discussed.

A Review of High-Energy Density Lithium-Air Battery Technology: Investigating the Effect of Oxides and Nanocatalysts

In vehicles that require a lot of electricity, such as electric vehicles, it is necessary to use high-energy batteries. Among the developed batteries, the lithium-ion battery has shown better performance. This battery has an energy density of 10 equal to that of a lithium-ion battery and uses air oxygen as the active material of the cathode and anode like a lithium-ion battery made of lithium metal. The cathode used in these batteries must have special properties such as strong catalytic activity and high conductivity, and nanotechnology has greatly helped to improve the materials used in the cathode of lithium-air batteries. The importance of proper catalyst distribution and the relationship between the oxide product and the catalyst and the indirect effect of the ORR catalyst on the OER reaction is not present in the fuel cell. The maximum capacity of lithium-air battery theory using graphene under optimal electron conduction conditions and the experimental maximum obtained for graphene by optimizing the structure geometry, examples of structural engineering using carbon fiber and carbon nanotubes in cathode fabrication with the ability to perform the reaction properly while providing space for lithium oxide placement, are examined. This article describes the mechanism of this battery, and its components are examined. The challenges of using this battery and the application of nanotechnology to solve these challenges are also discussed.

Nano and Battery Anode: A Review

Improving the anode properties, including increasing its capacity, is one of the basic necessities to improve battery performance. In this paper, high-capacity anodes with alloy performance are introduced, then the problem of fragmentation of these anodes and its effect during the cyclic life is stated. Then, the effect of reducing the size to the nanoscale in solving the problem of fragmentation and improving the properties is discussed, and finally the various forms of nanomaterials are examined. In this paper, electrode reduction in the anode, which is a nanoscale phenomenon, is described. The negative effects of this phenomenon on alloy anodes are expressed and how to eliminate these negative effects by preparing suitable nanostructures will be discussed. Also, the anodes of the titanium oxide family are introduced and the effects of Nano on the performance improvement of these anodes are expressed, and finally, the quasi-capacitive behavior, which is specific to Nano, will be introduced. Finally, the third type of anodes, exchange anodes, is introduced and their function is expressed. The effect of Nano on the reversibility of these anodes is mentioned. The advantages of nanotechnology for these electrodes are described. In this paper, it is found that nanotechnology, in addition to the common effects such as reducing the penetration distance and modulating the stress, also creates other interesting effects in this type of anode, such as capacitive quasi-capacitance, changing storage mechanism and lower volume change.

Application of micro and porous materials as nano-reactors

In general, nanostructured materials with specific size, shape and geometry have unique and different properties from bulk materials. Using reaction media with nanometer and micrometer dimensions, they can produce new nanomaterials with interesting and remarkable properties. In general, nano-reactors are nanometer-sized chambers in which chemical reactions can take place. of course, nanoreactors are somehow part of the reaction, and this is the main difference between them and micro-reactors. One of the useful solutions to achieve the environment of nanoreactors is the use of porous materials, so due to the importance of nanoreactors, porous structures of silicate and zeolite are among the most prominent and widely used compounds in this group.

Nanoreactors: properties, applications and characterization

Nanoreactors are a type of chemical reactor that is used mostly in nanotechnology and nanobiotechnology. These unique reactors are critical to the operation of a nano foundry, which is essentially a foundry that produces goods on a nanoscale. Active sites, such as transitional metal species, can also be added to nanoreactors. In this situation, the NR’s limited area might impact reaction rate and mechanism by increasing the contacts between reactants and active sites and changing the concentration of the reactant at the active site. Immobilization of chiral active centers inside porous materials has received a lot of interest in this context, and there have been a lot of publications proving the benefits of nano space confinement in chemical processes. The specific mechanism in which enantioselectivities are strengthened has been clarified using molecular dynamics simulations. Nanoreactors are nanometer-sized chambers with the potential to improve chemical conversions by shielding catalysts from external effects and encapsulating reactors and catalysts in a tiny space for an extended period of time. Natural and synthetic nanoreactors are the two types of nanoreactors that can be found in general. The first group has a more selective function while also having a more complicated structure, whereas the second group has more variation and a simpler structure. Synthetic nanoreactors have so far been made with a variety of molecules and large types of molecules. The space inside the nanoreactors is a good environment for the production of various nanostructures, in addition to a wide range of chemical reactions. When chemical reactions are carried out in confined spaces with nanometer dimensions and micrometer volumes, the kinetics and the entire process path are altered. Nanoreactors are restricted areas used to execute specialized chemical processes. In the cells of living organisms, numerous simultaneous reactions are based on the same concept. As a result, various biological and chemical structures with nanoreactor characteristics are used in this strategy.

Protein nanoparticles in drug delivery: animal protein, plant proteins and protein cages, albumin nanoparticles

In this article, we will describe the properties of albumin and its biological functions, types of sources that can be used to produce albumin nanoparticles, methods of producing albumin nanoparticles, its therapeutic applications and the importance of albumin nanoparticles in the production of pharmaceutical formulations. In view of the increasing use of Abraxane and its approval for use in the treatment of several types of cancer and during the final stages of clinical trials for other cancers, to evaluate it and compare its effectiveness with conventional non formulations of chemotherapy Paclitaxel is paid. In this article, we will examine the role and importance of animal proteins in Nano medicine and the various benefits of these biomolecules for the preparation of drug delivery carriers and the characteristics of plant protein Nano carriers and protein Nano cages and their potentials in diagnosis and treatment. Finally, the advantages and disadvantages of protein nanoparticles are mentioned, as well as the methods of production of albumin nanoparticles, its therapeutic applications and the importance of albumin nanoparticles in the production of pharmaceutical formulations.

Study on the Synthesized Rosin Glyceride over LaZSM-5 Zeolite Catalyst Synthesized by the in Situ Method

LaZSM-5 zeolite was synthesized by the in situ method and used as catalysts to catalyze the synthesis of rosin glyceride. As a comparison, ZSM-5 was also synthesized and used as catalysts to catalyze the synthesis of rosin glyceride. The synthesized ZSM-5 and LaZSM-5 zeolite catalysts were characterized and analyzed. The experimental results showed that the in situ synthesis of LaZSM-5 made La into the skeleton of ZSM-5 zeolite and increased the amount of Lewis acid on the LaZSM-5 zeolite. Also, Lewis acid was the key to liquid-phase esterification reaction. Compared with ZSM-5 zeolite, LaZSM-5 zeolite contributed to a higher yield and better stability as a catalyst for the synthesis of rosin glycerides.

Investigation of effective parameters on SAPO-34 nanocatalyst in the methanol-to-olefin conversion process: a review

Light olefins such as ethylene, propylene and butylene are mainly used in the petrochemical industry. Due to the growing need for light olefins in the industry and the future shortage of petroleum resources, the process of converting methanol to olefins (MTO) using non-oil sources has been considered as an alternative. Coal and natural gas are abundant in nature and the methods of converting them to methanol are well known today. Coal gasification or steam reforming of natural gas to produce synthetic gas (CO and hydrogen gas) can lead to methanol production. Methanol can also be catalytically converted to gasoline or olefins depending on the effective process and catalyst factors used. Due to the use of crude methanol in the MTO unit and because the feed does not require primary distillation, if the MTO unit is installed alongside the methanol unit, its capital costs will be reduced. The use of methanol can have advantages such as easier and less expensive transportation than ethane. Among the available catalysts, SAPO-34 is the most suitable catalyst for this process due to its small cavities and medium acidity. One of the problems of MTO units is the rapid deactivation of SAPO-34, which can also be affected by the synthesis factors, so it is possible to optimize the catalyst performance by modifying the synthesis conditions. In this article, we will introduce the MTO process and the factors affecting the production of light olefins.

Investigation of synthesis time and type of seed along with reduction of template consumption in the preparation of SAPO-34 catalyst and its performance in the MTO reaction

SAPO-34 catalysts were synthesized through the seeding approach under different seed conditions. The different seed synthesis times (6 h, 12 h, and 24 h) and three types of seeds were evaluated: the dried seed, the calcined seed, and the mother liquor from an unseeded synthesis, called the solution seed. Pure SAPO-34 was obtained using 12 h and 24 h solution seeds, in which a 40% reduction of template consumption was achieved simultaneously. All seeding induced samples represented higher catalytic performance in the MTO process than conventional SAPO-34 due to the smaller crystallite/particle sizes and larger external surface areas and mesopore volume. Furthermore, the changes in the acidity of samples affect their performance. The maximum olefin selectivity under industrial feed conditions (72 wt% methanol in water) was 91.79% for the sample prepared from the 12 h solution seed, which was 14.43% higher than the unseeded sample. Although this sample did not have the longest lifetime, it showed a 330 min lifespan, which was at least twice more than that of the conventional one (150 min). The sample prepared from the 6 h solution seed showed the longest lifetime of more than 500 min among all catalysts, although it was contaminated with a little SAPO-5.

SAPO-34 catalysts were synthesized through the seeding approach under different seed conditions.

The effect of nanoparticles on gas permeability with polyimide membranes and network hybrid membranes: a review

Polyimide membranes and network hybrid membranes exhibit high permeability despite good thermal and chemical stability, and high selectivity in gas mixture separation. In this study, the effect of nanoparticle distribution on the network polymer network, and changes in permeability, selectivity, and structure of the composite lattice membrane are investigated. According to the obtained permeability results, this increase in permeability was due to the increase of polymer network free volume and the formation of cavities in the nanoparticle-polymer interface. The significant results were that the permeability growth of gases with larger molecular size such as methane and nitrogen was higher than other gases. A comparison of the permeability growth of gases with the increasing volume fraction of nanoparticles confirms the dominance of the molecular sieve mechanism and the type of membrane transport mechanism change over polyimide and network Hybrid.